| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Previously, a revoked 'SignatureKey' belonging to a CA was not correctly checked for revocation. Now, both the 'key' and 'key.SignatureKey' are checked for @revoked. |
| Improper initialization in some firmware for some Intel(R) Active Management Technology (Intel(R) AMT), and some Intel(R) Standard Manageability may allow an information disclosure. System software adversary with a privileged user combined with a low complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Fit paired fragment job in the correct CCCB
For geometry jobs with a paired fragment job, at the moment, the
DRM scheduler's prepare_job() callback:
- checks for internal (driver) dependencies for the geometry job;
- calls into pvr_queue_get_paired_frag_job_dep() to check for external
dependencies for the fragment job (the two jobs are submitted together
but the common scheduler code doesn't know about it, so this needs to
be done at this point in time);
- calls into the prepare_job() callback again, but for the fragment job,
to check its internal dependencies as well, passing the fragment job's
drm_sched_job and the geometry job's drm_sched_entity / pvr_queue.
The problem with the last step is that pvr_queue_prepare_job() doesn't
always take the mismatched fragment job and geometry queue into account,
in particular when checking whether there is space for the fragment
command to be submitted, so the code ends up checking for space in the
geometry (i.e. wrong) CCCB.
The rest of the nested prepare_job() callback happens to work fine at
the moment as the other internal dependencies are not relevant for a
paired fragment job.
Move the initialisation of a paired fragment job's done fence and CCCB
fence to pvr_queue_get_paired_frag_job_dep(), inferring the correct
queue from the fragment job itself.
This fixes cases where prepare_job() wrongly assumed that there was
enough space for a paired fragment job in its own CCCB, unblocking
run_job(), which then returned early without writing the full sequence
of commands to the CCCB.
The above lead to kernel warnings such as the following and potentially
job timeouts (depending on waiters on the missing commands):
[ 552.421075] WARNING: drivers/gpu/drm/imagination/pvr_cccb.c:178 at pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr], CPU#2: kworker/u16:5/63
[ 552.421230] Modules linked in:
[ 552.421592] CPU: 2 UID: 0 PID: 63 Comm: kworker/u16:5 Tainted: G W 7.0.0-rc2-gc5d053e4dccb #39 PREEMPT
[ 552.421625] Tainted: [W]=WARN
[ 552.421637] Hardware name: Texas Instruments AM625 SK (DT)
[ 552.421655] Workqueue: powervr-sched drm_sched_run_job_work [gpu_sched]
[ 552.421744] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 552.421766] pc : pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr]
[ 552.421850] lr : pvr_queue_submit_job_to_cccb+0x57c/0xa74 [powervr]
[ 552.421923] sp : ffff800084c47650
[ 552.421936] x29: ffff800084c47740 x28: 0000000000000df8 x27: ffff800088a77000
[ 552.421979] x26: 0000000000000030 x25: ffff800084c47680 x24: 0000000000001000
[ 552.422017] x23: ffff800084c47820 x22: 1ffff00010988ecc x21: 0000000000000008
[ 552.422055] x20: 0000000000000208 x19: ffff000006ad5a88 x18: 0000000000000000
[ 552.422093] x17: 0000000020020000 x16: 0000000000020000 x15: 0000000000000000
[ 552.422130] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 552.422167] x11: 000000000000f2f2 x10: 00000000f3000000 x9 : 00000000f3f3f3f3
[ 552.422204] x8 : 00000000f2f2f200 x7 : ffff700010988ecc x6 : 0000000000000008
[ 552.422241] x5 : 0000000000000000 x4 : 1ffff0001114ee00 x3 : 0000000000000000
[ 552.422278] x2 : 0000000000000007 x1 : 0000000000000fff x0 : 000000000000002f
[ 552.422316] Call trace:
[ 552.422330] pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] (P)
[ 552.422411] pvr_queue_submit_job_to_cccb+0x57c/0xa74 [powervr]
[ 552.422486] pvr_queue_run_job+0x3a4/0x990 [powervr]
[ 552.422562] drm_sched_run_job_work+0x580/0xd48 [gpu_sched]
[ 552.422623] process_one_work+0x520/0x1288
[ 552.422657] worker_thread+0x3f0/0xb3c
[ 552.422679] kthread+0x334/0x3d8
[ 552.422706] ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
ata: sata_dwc_460ex: fix infinite loop in NCQ tag completion bit-scanning
The hand-rolled bit-scanning loop in the NCQ completion path has an
infinite loop bug. When tag_mask has only high bits set (e.g.
0x80000000), the inner while loop left-shifts tag_mask until it
overflows to 0. At that point !(0 & 1) is always true and 0 <<= 1
stays 0, causing an infinite loop in hardirq context with a spinlock
held.
Replace the open-coded bit-scanning with __ffs() which correctly
finds the least significant set bit and is bounded by the width of
the argument. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: wake eh reliably when using scsi_schedule_eh
Drivers which use the scsi_schedule_eh function to run the error handler
currently risk the error handler thread never waking once all commands are
timed out or inactive. There is no enforced memory order between setting
the host into error recovery state and counting busy commands. This can
result in a race with scsi_dec_host_busy where neither CPU sees both
conditions of all commands inactive and the host error state to request
waking the error handler.
To fix this, run the scsi_schedule_eh's scsi_eh_wakeup from a new work item
which will use rcu to ensure scsi_schedule_eh's call to scsi_host_busy will
occur after the error state is globally visible and will be seen by any
current scsi_dec_host_busy callers. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Handle partially initialized auxiliary devices
bnxt_aux_devices_init() calls auxiliary_device_init() before all fields
used by bnxt_aux_dev_release() are initialized. After
auxiliary_device_init() succeeds, later errors must unwind with
auxiliary_device_uninit(), which invokes the release callback.
The release callback assumes that aux_priv->id, aux_priv->edev,
edev->net and edev->ulp_tbl are all populated. If allocation fails
after auxiliary_device_init(), the release path can otherwise dereference
or clear partially initialized state.
Allocate and attach the bnxt_en_dev and ULP table before calling
auxiliary_device_init(), so the release callback only sees a fully
initialized auxiliary private object. If auxiliary_device_init() itself
fails, free those allocations directly because device_initialize() has not
run and the release callback will not be invoked.
This issue was found by a static analysis checker and confirmed by manual
source review. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: fix peer refcount leak in TCP error paths
When either the TCP RX or TX error path calls ovpn_peer_hold() followed
by schedule_work(&peer->tcp.defer_del_work), and the work item is already
pending from the other path, schedule_work() returns false and the work
runs only once. Since ovpn_tcp_peer_del_work() calls ovpn_peer_put()
exactly once, the extra reference taken by the losing path is never
dropped, leaking the peer object.
The race window:
CPU0 (strparser/RX error): CPU1 (tcp_tx_work/TX error):
ovpn_peer_hold() <- refcnt+1 ovpn_peer_hold() <- refcnt+2
schedule_work() <- queued schedule_work() <- NO-OP
(work already pending)
ovpn_tcp_peer_del_work runs:
ovpn_peer_del()
ovpn_peer_put() <- refcnt+1
<- peer never freed
Fix by checking the return value of schedule_work() in both paths and
calling ovpn_peer_put() to drop the extra reference if the work was
already pending. ovpn_peer_hold() is kept unconditional in the TX path
as it cannot fail at that point. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix PTP Call Trace during PTP release
If a PF reset occurs when the PTP state is ICE_PTP_UNINIT, then
ice_ptp_rebuild() will update the state to ICE_PTP_ERROR. This will
result in the following PTP release call trace during driver unload:
kernel BUG at lib/list_debug.c:52!
ice_ptp_release+0x332/0x3c0 [ice]
ice_deinit_features.part.0+0x10e/0x120 [ice]
ice_remove+0x100/0x220 [ice]
This was observed when passing PF1 through to a VM. ice_ptp_init()
fails because ctrl_pf is NULL and sets the state to ICE_PTP_UNINIT.
Fix by detecting the ICE_PTP_UNINIT state in ice_ptp_rebuild() and
returning without error, preventing the invalid state transition to
ICE_PTP_ERROR. The only valid path to ICE_PTP_ERROR is from
ICE_PTP_RESETTING after a failed rebuild. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Move jump_label_init() before parse_early_param()
When enabling both CONFIG_MEM_ALLOC_PROFILING=y and
CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT=y, then diabling memory
profiling by adding the boot parameter 'sysctl.vm.mem_profiling=0' will
cause the kernel failed to boot.
After analysis, this is because jump_label_init() must be called before
parse_early_param(), the early param handlers may modify static keys by
static_branch_enable/disable().
Fix this by moving jump_label_init() to before parse_early_param(). The
solution is similar to other architectures. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: Fix error code in smb2_aead_req_alloc()
The "*num_sgs" variable is a u32 so "ERR_PTR(*num_sgs)" doesn't work.
We would have to do something similar to the previous line where it's
cast to int and then long. However, it's simpler to store the return in
an int ret variable.
This bug would eventually result in a crash when dereference the invalid
error pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: spear: Initialize completion before requesting IRQ
In the report from Jaeyoung Chung:
"spear_adc_probe() in drivers/iio/adc/spear_adc.c registers its
interrupt handler with devm_request_irq() before it initializes
st->completion with init_completion(). If an interrupt arrives after
devm_request_irq() and before init_completion(), the handler calls
complete() on an uninitialized completion, causing a kernel panic.
The probe path, in spear_adc_probe():
iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */
...
retval = devm_request_irq(&pdev->dev, irq, spear_adc_isr, 0,
LPC32XXAD_NAME, st); /* register handler */
...
init_completion(&st->completion); /* initialize completion */
spear_adc_isr() calls complete():
complete(&st->completion);
If the device raises an interrupt before init_completion() runs,
complete() acquires the uninitialized wait.lock and walks the zeroed
task_list in swake_up_locked(). The zeroed task_list makes list_empty()
return false, so swake_up_locked() dereferences a NULL list entry,
triggering a KASAN wild-memory-access."
Fix the chance of a spurious IRQ causing an uninitialized pointer
dereference by moving init_completion() above devm_request_irq(). |
| A memory initialization issue was addressed with improved memory handling. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. An app may be able to cause unexpected system termination. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs
The driver, through the SAS transport, exposes a sysfs interface to
enable/disable PHYs in a controller/expander setup. When multiple PHYs
are disabled and enabled in rapid succession, the persistent and current
config pages related to SAS IO unit/SAS Expander pages could get
corrupted.
Use separate memory for each config request. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: initialize close_work early to avoid warning
We encountered a warning that close_work was canceled before
initialization.
WARNING: CPU: 7 PID: 111103 at kernel/workqueue.c:3047 __flush_work+0x19e/0x1b0
Workqueue: events smc_lgr_terminate_work [smc]
RIP: 0010:__flush_work+0x19e/0x1b0
Call Trace:
? __wake_up_common+0x7a/0x190
? work_busy+0x80/0x80
__cancel_work_timer+0xe3/0x160
smc_close_cancel_work+0x1a/0x70 [smc]
smc_close_active_abort+0x207/0x360 [smc]
__smc_lgr_terminate.part.38+0xc8/0x180 [smc]
process_one_work+0x19e/0x340
worker_thread+0x30/0x370
? process_one_work+0x340/0x340
kthread+0x117/0x130
? __kthread_cancel_work+0x50/0x50
ret_from_fork+0x22/0x30
This is because when smc_close_cancel_work is triggered, e.g. the RDMA
driver is rmmod and the LGR is terminated, the conn->close_work is
flushed before initialization, resulting in WARN_ON(!work->func).
__smc_lgr_terminate | smc_connect_{rdma|ism}
-------------------------------------------------------------
| smc_conn_create
| \- smc_lgr_register_conn
for conn in lgr->conns_all |
\- smc_conn_kill |
\- smc_close_active_abort |
\- smc_close_cancel_work |
\- cancel_work_sync |
\- __flush_work |
(close_work) |
| smc_close_init
| \- INIT_WORK(&close_work)
So fix this by initializing close_work before establishing the
connection. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix multiple init when debugfs is disabled
If bt_debugfs is not created successfully, which happens if either
CONFIG_DEBUG_FS or CONFIG_DEBUG_FS_ALLOW_ALL is unset, then iso_init()
returns early and does not set iso_inited to true. This means that a
subsequent call to iso_init() will result in duplicate calls to
proto_register(), bt_sock_register(), etc.
With CONFIG_LIST_HARDENED and CONFIG_BUG_ON_DATA_CORRUPTION enabled, the
duplicate call to proto_register() triggers this BUG():
list_add double add: new=ffffffffc0b280d0, prev=ffffffffbab56250,
next=ffffffffc0b280d0.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:35!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 2 PID: 887 Comm: bluetoothd Not tainted 6.10.11-1-ao-desktop #1
RIP: 0010:__list_add_valid_or_report+0x9a/0xa0
...
__list_add_valid_or_report+0x9a/0xa0
proto_register+0x2b5/0x340
iso_init+0x23/0x150 [bluetooth]
set_iso_socket_func+0x68/0x1b0 [bluetooth]
kmem_cache_free+0x308/0x330
hci_sock_sendmsg+0x990/0x9e0 [bluetooth]
__sock_sendmsg+0x7b/0x80
sock_write_iter+0x9a/0x110
do_iter_readv_writev+0x11d/0x220
vfs_writev+0x180/0x3e0
do_writev+0xca/0x100
...
This change removes the early return. The check for iso_debugfs being
NULL was unnecessary, it is always NULL when iso_inited is false. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: ensure that nfsd4_fattr_args.context is zeroed out
If nfsd4_encode_fattr4 ends up doing a "goto out" before we get to
checking for the security label, then args.context will be set to
uninitialized junk on the stack, which we'll then try to free.
Initialize it early. |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix request.queuelist usage in flush
Friedrich Weber reported a kernel crash problem and bisected to commit
81ada09cc25e ("blk-flush: reuse rq queuelist in flush state machine").
The root cause is that we use "list_move_tail(&rq->queuelist, pending)"
in the PREFLUSH/POSTFLUSH sequences. But rq->queuelist.next == xxx since
it's popped out from plug->cached_rq in __blk_mq_alloc_requests_batch().
We don't initialize its queuelist just for this first request, although
the queuelist of all later popped requests will be initialized.
Fix it by changing to use "list_add_tail(&rq->queuelist, pending)" so
rq->queuelist doesn't need to be initialized. It should be ok since rq
can't be on any list when PREFLUSH or POSTFLUSH, has no move actually.
Please note the commit 81ada09cc25e ("blk-flush: reuse rq queuelist in
flush state machine") also has another requirement that no drivers would
touch rq->queuelist after blk_mq_end_request() since we will reuse it to
add rq to the post-flush pending list in POSTFLUSH. If this is not true,
we will have to revert that commit IMHO.
This updated version adds "list_del_init(&rq->queuelist)" in flush rq
callback since the dm layer may submit request of a weird invalid format
(REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH), which causes double list_add
if without this "list_del_init(&rq->queuelist)". The weird invalid format
problem should be fixed in dm layer. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: fix list corruption from resetting io stat
Since commit 3b8cc6298724 ("blk-cgroup: Optimize blkcg_rstat_flush()"),
each iostat instance is added to blkcg percpu list, so blkcg_reset_stats()
can't reset the stat instance by memset(), otherwise the llist may be
corrupted.
Fix the issue by only resetting the counter part. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Add BPF_PROG_TYPE_CGROUP_SKB attach type enforcement in BPF_LINK_CREATE
bpf_prog_attach uses attach_type_to_prog_type to enforce proper
attach type for BPF_PROG_TYPE_CGROUP_SKB. link_create uses
bpf_prog_get and relies on bpf_prog_attach_check_attach_type
to properly verify prog_type <> attach_type association.
Add missing attach_type enforcement for the link_create case.
Otherwise, it's currently possible to attach cgroup_skb prog
types to other cgroup hooks. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix overwriting ct original tuple for ICMPv6
OVS_PACKET_CMD_EXECUTE has 3 main attributes:
- OVS_PACKET_ATTR_KEY - Packet metadata in a netlink format.
- OVS_PACKET_ATTR_PACKET - Binary packet content.
- OVS_PACKET_ATTR_ACTIONS - Actions to execute on the packet.
OVS_PACKET_ATTR_KEY is parsed first to populate sw_flow_key structure
with the metadata like conntrack state, input port, recirculation id,
etc. Then the packet itself gets parsed to populate the rest of the
keys from the packet headers.
Whenever the packet parsing code starts parsing the ICMPv6 header, it
first zeroes out fields in the key corresponding to Neighbor Discovery
information even if it is not an ND packet.
It is an 'ipv6.nd' field. However, the 'ipv6' is a union that shares
the space between 'nd' and 'ct_orig' that holds the original tuple
conntrack metadata parsed from the OVS_PACKET_ATTR_KEY.
ND packets should not normally have conntrack state, so it's fine to
share the space, but normal ICMPv6 Echo packets or maybe other types of
ICMPv6 can have the state attached and it should not be overwritten.
The issue results in all but the last 4 bytes of the destination
address being wiped from the original conntrack tuple leading to
incorrect packet matching and potentially executing wrong actions
in case this packet recirculates within the datapath or goes back
to userspace.
ND fields should not be accessed in non-ND packets, so not clearing
them should be fine. Executing memset() only for actual ND packets to
avoid the issue.
Initializing the whole thing before parsing is needed because ND packet
may not contain all the options.
The issue only affects the OVS_PACKET_CMD_EXECUTE path and doesn't
affect packets entering OVS datapath from network interfaces, because
in this case CT metadata is populated from skb after the packet is
already parsed. |
