| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in Keycloak. A user with high privileges could read sensitive information from a Vault file that is not within the expected context. This attacker must have previous high access to the Keycloak server in order to perform resource creation, for example, an LDAP provider configuration and set up a Vault read file, which will only inform whether that file exists or not. |
| OpenCode Systems OC Messaging / USSD Gateway OC Release 6.32.2 contains a broken access control vulnerability in the web-based control panel allowing authenticated low-privileged attackers to gain to access to arbitrary SMS messages via a crafted company or tenant identifier parameter. |
| A security issue was discovered in ingress-nginx where the `nginx.ingress.kubernetes.io/rewrite-target` Ingress annotation can be used to inject configuration into nginx. This can lead to arbitrary code execution in the context of the ingress-nginx controller, and disclosure of Secrets accessible to the controller. (Note that in the default installation, the controller can access all Secrets cluster-wide.) |
| Hitachi Vantara Pentaho Data Integration & Analytics versions before 10.2.0.6, including 9.3.x and 8.3.x, do not restrict Groovy scripts in new PRPT reports published by users, allowing insertion of arbitrary scripts and leading to a RCE. |
| A vulnerability in the RADIUS Policy API endpoints of Cisco ISE could allow an authenticated, remote attacker with read-only Administrator privileges to gain unauthorized access to sensitive information on an affected device.
This vulnerability is due to improper role-based access control (RBAC) permissions on the RADIUS Policy API endpoints. An attacker could exploit this vulnerability by bypassing the web-based management interface and directly calling an affected endpoint. A successful exploit could allow the attacker to gain unauthorized read access to sensitive RADIUS Policy details that are restricted for their role. |
| A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco 350 Series Managed Switches (SG350) and Cisco 350X Series Stackable Managed Switches (SG350X) firmware could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper error handling when parsing response data for a specific SNMP request. An attacker could exploit this vulnerability by sending a specific SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMPv2c or earlier, the attacker must know a valid read-write or read-only SNMP community string for the affected system. To exploit this vulnerability through SNMPv3, the attacker must have valid SNMP user credentials for the affected system. |
| A vulnerability in the log file download functionality of Cisco Prime Infrastructure could allow an authenticated, remote attacker to download arbitrary log files from the server.
This vulnerability is due to insufficient authorization checks on the download service API. An attacker could exploit this vulnerability by submitting a crafted URL request to an affected device. A successful exploit could allow the attacker to download sensitive log files that they would otherwise not have authorization to access.
To exploit this vulnerability, the attacker must have valid credentials to access the web-based management interface of the affected device. |
| A vulnerability in the connection-handling mechanism of Cisco Crosswork Network Controller (CNC) and Cisco Network Services Orchestrator (NSO) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected system.
This vulnerability is due to an inadequate implementation of rate-limiting on incoming network connections. An attacker could exploit this vulnerability by sending a large number of connection requests to an affected system. A successful exploit could allow the attacker to exhaust available connection resources, causing Cisco CNC and Cisco NSO to become unresponsive and resulting in a DoS condition for legitimate users and dependent services. A manual reboot of the system is required to recover from this condition. |
| Nginx UI is a web user interface for the Nginx web server. In version 2.3.5, an unauthenticated bootstrap takeover exists in nginx-ui during the initial installation window exposed by POST /api/install. At time of publication no public patches are available. |
| A vulnerability in the Lite Agent feature of Cisco Enterprise Chat and Email (ECE) could allow an authenticated, remote attacker to conduct browser-based attacks. To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of Agent.
This vulnerability is due to inadequate validation of file contents during file upload operations. An attacker could exploit this vulnerability by uploading a file that contains malicious scripts or HTML code, which the application could make available to other users to access. A successful exploit could allow the attacker to execute the contents of that file in the browser of a user and conduct browser-based attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix null dereference in find_network
The variable pwlan has the possibility of being NULL when passed into
rtw_free_network_nolock() which would later dereference the variable. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: always flush state and policy upon NETDEV_UNREGISTER event
syzbot is reporting that "struct xfrm_state" refcount is leaking.
unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 2
ref_tracker: netdev@ffff888052f24618 has 1/1 users at
__netdev_tracker_alloc include/linux/netdevice.h:4400 [inline]
netdev_tracker_alloc include/linux/netdevice.h:4412 [inline]
xfrm_dev_state_add+0x3a5/0x1080 net/xfrm/xfrm_device.c:316
xfrm_state_construct net/xfrm/xfrm_user.c:986 [inline]
xfrm_add_sa+0x34ff/0x5fa0 net/xfrm/xfrm_user.c:1022
xfrm_user_rcv_msg+0x58e/0xc00 net/xfrm/xfrm_user.c:3507
netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2550
xfrm_netlink_rcv+0x71/0x90 net/xfrm/xfrm_user.c:3529
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x8c8/0xdd0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa5d/0xc30 net/socket.c:2592
___sys_sendmsg+0x134/0x1d0 net/socket.c:2646
__sys_sendmsg+0x16d/0x220 net/socket.c:2678
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This is because commit d77e38e612a0 ("xfrm: Add an IPsec hardware
offloading API") implemented xfrm_dev_unregister() as no-op despite
xfrm_dev_state_add() from xfrm_state_construct() acquires a reference
to "struct net_device".
I guess that that commit expected that NETDEV_DOWN event is fired before
NETDEV_UNREGISTER event fires, and also assumed that xfrm_dev_state_add()
is called only if (dev->features & NETIF_F_HW_ESP) != 0.
Sabrina Dubroca identified steps to reproduce the same symptoms as below.
echo 0 > /sys/bus/netdevsim/new_device
dev=$(ls -1 /sys/bus/netdevsim/devices/netdevsim0/net/)
ip xfrm state add src 192.168.13.1 dst 192.168.13.2 proto esp \
spi 0x1000 mode tunnel aead 'rfc4106(gcm(aes))' $key 128 \
offload crypto dev $dev dir out
ethtool -K $dev esp-hw-offload off
echo 0 > /sys/bus/netdevsim/del_device
Like these steps indicate, the NETIF_F_HW_ESP bit can be cleared after
xfrm_dev_state_add() acquired a reference to "struct net_device".
Also, xfrm_dev_state_add() does not check for the NETIF_F_HW_ESP bit
when acquiring a reference to "struct net_device".
Commit 03891f820c21 ("xfrm: handle NETDEV_UNREGISTER for xfrm device")
re-introduced the NETDEV_UNREGISTER event to xfrm_dev_event(), but that
commit for unknown reason chose to share xfrm_dev_down() between the
NETDEV_DOWN event and the NETDEV_UNREGISTER event.
I guess that that commit missed the behavior in the previous paragraph.
Therefore, we need to re-introduce xfrm_dev_unregister() in order to
release the reference to "struct net_device" by unconditionally flushing
state and policy. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: gadget: Move vbus draw to workqueue context
Currently dwc3_gadget_vbus_draw() can be called from atomic
context, which in turn invokes power-supply-core APIs. And
some these PMIC APIs have operations that may sleep, leading
to kernel panic.
Fix this by moving the vbus_draw into a workqueue context. |
| A vulnerability was identified in D-Link DI-8100 16.07.26A1. This affects the function sprintf of the file yyxz.asp. The manipulation of the argument ID leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. |
| A weakness has been identified in D-Link DI-8100 16.07.26A1. Affected is the function sprintf of the file /auto_reboot.asp of the component HTTP Handler. This manipulation of the argument enable/time causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. |
| A security vulnerability has been detected in D-Link DI-8100 16.07.26A1. Affected by this vulnerability is the function url_rule_asp of the file /url_rule.asp of the component POST Parameter Handler. Such manipulation leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. |
| A vulnerability was detected in D-Link DI-8100 16.07.26A1. Affected by this issue is the function tggl_asp of the file /tggl.asp of the component HTTP Request Handler. Performing a manipulation of the argument Name results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used. |
| A flaw has been found in D-Link DI-8100 16.07.26A1. This affects an unknown part of the file /url_member.asp of the component Web Management Interface. Executing a manipulation of the argument Name can lead to buffer overflow. The attack can be launched remotely. The exploit has been published and may be used. |
| A vulnerability in the web-based management interface of Cisco IoT Field Network Director could allow an authenticated, remote attacker with low privileges to access files and execute commands on a remote router.
This vulnerability is due to insufficient input validation of user-supplied data. An attacker could exploit this vulnerability by submitting crafted input in the web-based management interface. A successful exploit could allow the attacker to create, read, or delete files and execute limited commands in user EXEC mode on a remote router. |
| A vulnerability in the web-based management interface of Cisco IoT Field Network Director could allow an authenticated, remote attacker with low privileges to cause a DoS condition on a remotely managed router.
This vulnerability is due to improper error handling. An attacker could exploit this vulnerability by submitting crafted input to the web-based management interface. A successful exploit could allow the attacker to request unauthorized files from a remote router, causing the router to reload and resulting in a DoS condition. |
