| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: check iparea_offset and ipv6_prefixes_cnt when receiving proposal msg
When receiving proposal msg in server, the field iparea_offset
and the field ipv6_prefixes_cnt in proposal msg are from the
remote client and can not be fully trusted. Especially the
field iparea_offset, once exceed the max value, there has the
chance to access wrong address, and crash may happen.
This patch checks iparea_offset and ipv6_prefixes_cnt before using them. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: check smcd_v2_ext_offset when receiving proposal msg
When receiving proposal msg in server, the field smcd_v2_ext_offset in
proposal msg is from the remote client and can not be fully trusted.
Once the value of smcd_v2_ext_offset exceed the max value, there has
the chance to access wrong address, and crash may happen.
This patch checks the value of smcd_v2_ext_offset before using it. |
| Squid is an open source caching proxy for the Web supporting HTTP, HTTPS, FTP, and more. Due to Input Validation, Premature Release of Resource During Expected Lifetime, and Missing Release of Resource after Effective Lifetime bugs, Squid is vulnerable to Denial of Service attacks by a trusted server against all clients using the proxy. This bug is fixed in the default build configuration of Squid version 6.10. |
| An issue was discovered in Fort before 1.6.3. A malicious RPKI repository that descends from a (trusted) Trust Anchor can serve (via rsync or RRDP) a signed object containing an empty signedAttributes field. Fort accesses the set's elements without sanitizing it first. Because Fort is an RPKI Relying Party, a crash can lead to Route Origin Validation unavailability, which can lead to compromised routing. |
| An issue was discovered in Fort before 1.6.3. A malicious RPKI repository that descends from a (trusted) Trust Anchor can serve (via rsync or RRDP) an ROA or a Manifest containing a signedAttrs encoded in non-canonical form. This bypasses Fort's BER decoder, reaching a point in the code that panics when faced with data not encoded in DER. Because Fort is an RPKI Relying Party, a panic can lead to Route Origin Validation unavailability, which can lead to compromised routing. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: sc16is7xx: fix invalid FIFO access with special register set
When enabling access to the special register set, Receiver time-out and
RHR interrupts can happen. In this case, the IRQ handler will try to read
from the FIFO thru the RHR register at address 0x00, but address 0x00 is
mapped to DLL register, resulting in erroneous FIFO reading.
Call graph example:
sc16is7xx_startup(): entry
sc16is7xx_ms_proc(): entry
sc16is7xx_set_termios(): entry
sc16is7xx_set_baud(): DLH/DLL = $009C --> access special register set
sc16is7xx_port_irq() entry --> IIR is 0x0C
sc16is7xx_handle_rx() entry
sc16is7xx_fifo_read(): --> unable to access FIFO (RHR) because it is
mapped to DLL (LCR=LCR_CONF_MODE_A)
sc16is7xx_set_baud(): exit --> Restore access to general register set
Fix the problem by claiming the efr_lock mutex when accessing the Special
register set. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: mtk-cmdq: Move devm_mbox_controller_register() after devm_pm_runtime_enable()
When mtk-cmdq unbinds, a WARN_ON message with condition
pm_runtime_get_sync() < 0 occurs.
According to the call tracei below:
cmdq_mbox_shutdown
mbox_free_channel
mbox_controller_unregister
__devm_mbox_controller_unregister
...
The root cause can be deduced to be calling pm_runtime_get_sync() after
calling pm_runtime_disable() as observed below:
1. CMDQ driver uses devm_mbox_controller_register() in cmdq_probe()
to bind the cmdq device to the mbox_controller, so
devm_mbox_controller_unregister() will automatically unregister
the device bound to the mailbox controller when the device-managed
resource is removed. That means devm_mbox_controller_unregister()
and cmdq_mbox_shoutdown() will be called after cmdq_remove().
2. CMDQ driver also uses devm_pm_runtime_enable() in cmdq_probe() after
devm_mbox_controller_register(), so that devm_pm_runtime_disable()
will be called after cmdq_remove(), but before
devm_mbox_controller_unregister().
To fix this problem, cmdq_probe() needs to move
devm_mbox_controller_register() after devm_pm_runtime_enable() to make
devm_pm_runtime_disable() be called after
devm_mbox_controller_unregister(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: Fix FSM command timeout issue
When driver processes the internal state change command, it use an
asynchronous thread to process the command operation. If the main
thread detects that the task has timed out, the asynchronous thread
will panic when executing the completion notification because the
main thread completion object has been released.
BUG: unable to handle page fault for address: fffffffffffffff8
PGD 1f283a067 P4D 1f283a067 PUD 1f283c067 PMD 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:complete_all+0x3e/0xa0
[...]
Call Trace:
<TASK>
? __die_body+0x68/0xb0
? page_fault_oops+0x379/0x3e0
? exc_page_fault+0x69/0xa0
? asm_exc_page_fault+0x22/0x30
? complete_all+0x3e/0xa0
fsm_main_thread+0xa3/0x9c0 [mtk_t7xx (HASH:1400 5)]
? __pfx_autoremove_wake_function+0x10/0x10
kthread+0xd8/0x110
? __pfx_fsm_main_thread+0x10/0x10 [mtk_t7xx (HASH:1400 5)]
? __pfx_kthread+0x10/0x10
ret_from_fork+0x38/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
[...]
CR2: fffffffffffffff8
---[ end trace 0000000000000000 ]---
Use the reference counter to ensure safe release as Sergey suggests:
https://lore.kernel.org/all/da90f64c-260a-4329-87bf-1f9ff20a5951@gmail.com/ |
| Improper Input Validation vulnerability in Apache Traffic Server.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.5.
Users are recommended to upgrade to version 9.2.6, which fixes the issue, or 10.0.2, which does not have the issue. |
| An invalid pointer in the modbus_receive() function of libmodbus v3.1.6 allows attackers to cause a Denial of Service (DoS) via a crafted message sent to the unit-test-server. |
| dcmdata in DCMTK before 3.6.9 has a segmentation fault via an invalid DIMSE message. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: inet_defrag: prevent sk release while still in use
ip_local_out() and other functions can pass skb->sk as function argument.
If the skb is a fragment and reassembly happens before such function call
returns, the sk must not be released.
This affects skb fragments reassembled via netfilter or similar
modules, e.g. openvswitch or ct_act.c, when run as part of tx pipeline.
Eric Dumazet made an initial analysis of this bug. Quoting Eric:
Calling ip_defrag() in output path is also implying skb_orphan(),
which is buggy because output path relies on sk not disappearing.
A relevant old patch about the issue was :
8282f27449bf ("inet: frag: Always orphan skbs inside ip_defrag()")
[..]
net/ipv4/ip_output.c depends on skb->sk being set, and probably to an
inet socket, not an arbitrary one.
If we orphan the packet in ipvlan, then downstream things like FQ
packet scheduler will not work properly.
We need to change ip_defrag() to only use skb_orphan() when really
needed, ie whenever frag_list is going to be used.
Eric suggested to stash sk in fragment queue and made an initial patch.
However there is a problem with this:
If skb is refragmented again right after, ip_do_fragment() will copy
head->sk to the new fragments, and sets up destructor to sock_wfree.
IOW, we have no choice but to fix up sk_wmem accouting to reflect the
fully reassembled skb, else wmem will underflow.
This change moves the orphan down into the core, to last possible moment.
As ip_defrag_offset is aliased with sk_buff->sk member, we must move the
offset into the FRAG_CB, else skb->sk gets clobbered.
This allows to delay the orphaning long enough to learn if the skb has
to be queued or if the skb is completing the reasm queue.
In the former case, things work as before, skb is orphaned. This is
safe because skb gets queued/stolen and won't continue past reasm engine.
In the latter case, we will steal the skb->sk reference, reattach it to
the head skb, and fix up wmem accouting when inet_frag inflates truesize. |
| When asked to both use a `.netrc` file for credentials and to follow HTTP
redirects, curl could leak the password used for the first host to the
followed-to host under certain circumstances.
This flaw only manifests itself if the netrc file has an entry that matches
the redirect target hostname but the entry either omits just the password or
omits both login and password. |
| A vulnerability was discovered in the 389 Directory Server that allows an unauthenticated attacker with network access to the LDAP port to cause a denial of service. The denial of service is triggered by a single message sent over a TCP connection, no bind or other authentication is required. The message triggers a segmentation fault that results in slapd crashing. |
| Vulnerability in the MySQL Client product of Oracle MySQL (component: Client: mysqldump). Supported versions that are affected are 8.0.0-8.0.41, 8.4.0-8.4.4 and 9.0.0-9.2.0. Difficult to exploit vulnerability allows low privileged attacker with network access via multiple protocols to compromise MySQL Client. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all MySQL Client accessible data as well as unauthorized update, insert or delete access to some of MySQL Client accessible data. CVSS 3.1 Base Score 5.9 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:L/A:N). |
| Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: UDF). Supported versions that are affected are 8.0.0-8.0.41, 8.4.0-8.4.4 and 9.0.0-9.2.0. Difficult to exploit vulnerability allows high privileged attacker with logon to the infrastructure where MySQL Server executes to compromise MySQL Server. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server. CVSS 3.1 Base Score 4.0 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:H/UI:R/S:U/C:N/I:N/A:H). |
| A privilege escalation vulnerability exists in the login.php functionality of meddream MedDream PACS Premium 7.3.3.840. A specially crafted .php file can lead to elevated capabilities. An attacker can upload a malicious file to trigger this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: brcmstb: Fix error path after a call to regulator_bulk_get()
If the regulator_bulk_get() returns an error and no regulators
are created, we need to set their number to zero.
If we don't do this and the PCIe link up fails, a call to the
regulator_bulk_free() will result in a kernel panic.
While at it, print the error value, as we cannot return an error
upwards as the kernel will WARN() on an error from add_bus().
[kwilczynski: commit log, use comma in the message to match style with
other similar messages] |
| In the Linux kernel, the following vulnerability has been resolved:
rtnetlink: Allocate vfinfo size for VF GUIDs when supported
Commit 30aad41721e0 ("net/core: Add support for getting VF GUIDs")
added support for getting VF port and node GUIDs in netlink ifinfo
messages, but their size was not taken into consideration in the
function that allocates the netlink message, causing the following
warning when a netlink message is filled with many VF port and node
GUIDs:
# echo 64 > /sys/bus/pci/devices/0000\:08\:00.0/sriov_numvfs
# ip link show dev ib0
RTNETLINK answers: Message too long
Cannot send link get request: Message too long
Kernel warning:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1930 at net/core/rtnetlink.c:4151 rtnl_getlink+0x586/0x5a0
Modules linked in: xt_conntrack xt_MASQUERADE nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay mlx5_ib macsec mlx5_core tls rpcrdma rdma_ucm ib_uverbs ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm iw_cm ib_ipoib fuse ib_cm ib_core
CPU: 2 UID: 0 PID: 1930 Comm: ip Not tainted 6.14.0-rc2+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:rtnl_getlink+0x586/0x5a0
Code: cb 82 e8 3d af 0a 00 4d 85 ff 0f 84 08 ff ff ff 4c 89 ff 41 be ea ff ff ff e8 66 63 5b ff 49 c7 07 80 4f cb 82 e9 36 fc ff ff <0f> 0b e9 16 fe ff ff e8 de a0 56 00 66 66 2e 0f 1f 84 00 00 00 00
RSP: 0018:ffff888113557348 EFLAGS: 00010246
RAX: 00000000ffffffa6 RBX: ffff88817e87aa34 RCX: dffffc0000000000
RDX: 0000000000000003 RSI: 0000000000000000 RDI: ffff88817e87afb8
RBP: 0000000000000009 R08: ffffffff821f44aa R09: 0000000000000000
R10: ffff8881260f79a8 R11: ffff88817e87af00 R12: ffff88817e87aa00
R13: ffffffff8563d300 R14: 00000000ffffffa6 R15: 00000000ffffffff
FS: 00007f63a5dbf280(0000) GS:ffff88881ee00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f63a5ba4493 CR3: 00000001700fe002 CR4: 0000000000772eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0xa5/0x230
? rtnl_getlink+0x586/0x5a0
? report_bug+0x22d/0x240
? handle_bug+0x53/0xa0
? exc_invalid_op+0x14/0x50
? asm_exc_invalid_op+0x16/0x20
? skb_trim+0x6a/0x80
? rtnl_getlink+0x586/0x5a0
? __pfx_rtnl_getlink+0x10/0x10
? rtnetlink_rcv_msg+0x1e5/0x860
? __pfx___mutex_lock+0x10/0x10
? rcu_is_watching+0x34/0x60
? __pfx_lock_acquire+0x10/0x10
? stack_trace_save+0x90/0xd0
? filter_irq_stacks+0x1d/0x70
? kasan_save_stack+0x30/0x40
? kasan_save_stack+0x20/0x40
? kasan_save_track+0x10/0x30
rtnetlink_rcv_msg+0x21c/0x860
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
? __pfx_rtnetlink_rcv_msg+0x10/0x10
? arch_stack_walk+0x9e/0xf0
? rcu_is_watching+0x34/0x60
? lock_acquire+0xd5/0x410
? rcu_is_watching+0x34/0x60
netlink_rcv_skb+0xe0/0x210
? __pfx_rtnetlink_rcv_msg+0x10/0x10
? __pfx_netlink_rcv_skb+0x10/0x10
? rcu_is_watching+0x34/0x60
? __pfx___netlink_lookup+0x10/0x10
? lock_release+0x62/0x200
? netlink_deliver_tap+0xfd/0x290
? rcu_is_watching+0x34/0x60
? lock_release+0x62/0x200
? netlink_deliver_tap+0x95/0x290
netlink_unicast+0x31f/0x480
? __pfx_netlink_unicast+0x10/0x10
? rcu_is_watching+0x34/0x60
? lock_acquire+0xd5/0x410
netlink_sendmsg+0x369/0x660
? lock_release+0x62/0x200
? __pfx_netlink_sendmsg+0x10/0x10
? import_ubuf+0xb9/0xf0
? __import_iovec+0x254/0x2b0
? lock_release+0x62/0x200
? __pfx_netlink_sendmsg+0x10/0x10
____sys_sendmsg+0x559/0x5a0
? __pfx_____sys_sendmsg+0x10/0x10
? __pfx_copy_msghdr_from_user+0x10/0x10
? rcu_is_watching+0x34/0x60
? do_read_fault+0x213/0x4a0
? rcu_is_watching+0x34/0x60
___sys_sendmsg+0xe4/0x150
? __pfx____sys_sendmsg+0x10/0x10
? do_fault+0x2cc/0x6f0
? handle_pte_fault+0x2e3/0x3d0
? __pfx_handle_pte_fault+0x10/0x10
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
spufs: fix gang directory lifetimes
prior to "[POWERPC] spufs: Fix gang destroy leaks" we used to have
a problem with gang lifetimes - creation of a gang returns opened
gang directory, which normally gets removed when that gets closed,
but if somebody has created a context belonging to that gang and
kept it alive until the gang got closed, removal failed and we
ended up with a leak.
Unfortunately, it had been fixed the wrong way. Dentry of gang
directory was no longer pinned, and rmdir on close was gone.
One problem was that failure of open kept calling simple_rmdir()
as cleanup, which meant an unbalanced dput(). Another bug was
in the success case - gang creation incremented link count on
root directory, but that was no longer undone when gang got
destroyed.
Fix consists of
* reverting the commit in question
* adding a counter to gang, protected by ->i_rwsem
of gang directory inode.
* having it set to 1 at creation time, dropped
in both spufs_dir_close() and spufs_gang_close() and bumped
in spufs_create_context(), provided that it's not 0.
* using simple_recursive_removal() to take the gang
directory out when counter reaches zero. |
