| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fastopen: only mark MPTFO subflows with SYN data
Passive TCP Fast Open accepts a valid-cookie SYN even when it carries
no data. In that case the child socket's receive queue is intentionally
left empty.
mptcp_fastopen_subflow_synack_set_params() set is_mptfo before checking
for queued SYN data. That made data-less TFO SYNs hit a WARN and, if
the warning was non-fatal, left stale MPTFO state behind. The stale
flag could later trigger a state-confusion bug in
check_fully_established().
Only mark the subflow as MPTFO after confirming that an SKB was queued.
Return quietly when the receive queue is empty.
Note that mptcp_subflow_context's is_mptfo field is now not just about
subflows where the TFO was present, but about MPTFO subflow that
consumed SYN data. Only having a valid cookie but not carrying data is
not really "doing TFO". |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: avoid combining some incoming suboptions
Some MPTCP suboptions are mutually exclusive according to the RFC8684,
but also because in different places, the code doesn't expect some
combinations to be present. That's specially true for suboptions that
would be present twice, but with different attributes.
The new restrictions are the same as the ones applied on the output
side, with mptcp_write_options. The same rules can be reused with a
small fix: an MP_FASTCLOSE can be used with a DSS when the sender picks
this option [1], which is not the case on Linux. Here are the rules:
Which options can be used together?
X: mutually exclusive
O: often used together
C: can be used together in some cases
P: could be used together but we prefer not to (optimisations)
| Opt: | MPC | MPJ | DSS | ADD | RM | PRIO | FAIL | FC |
|------|------|------|------|------|------|------|------|------|
| MPC |------|------|------|------|------|------|------|------|
| MPJ | X |------|------|------|------|------|------|------|
| DSS | X | X |------|------|------|------|------|------|
| ADD | X | X | P |------|------|------|------|------|
| RM | C | C | C | P |------|------|------|------|
| PRIO | X | C | C | C | C |------|------|------|
| FAIL | X | X | C | X | X | X |------|------|
| FC | X | X | P | X | X | X | X |------|
| RST | X | X | X | X | X | X | O | O |
|------|------|------|------|------|------|------|------|------|
The only difference is with the 'P': another stack could send and
ADD_ADDR with other suboptions (DSS, RM_ADDR), and this should be
allowed.
A few points of attention:
- In theory, an MP_CAPABLE could be used with a RM_ADDR, but there is
no reason to add it with a SYN. Note that even with a 4th ACK, it
doesn't seem to be useful, except when IDs are known in advance via
another channel. Better not to break that.
- Now, combining both an MP_CAPABLE and an MP_JOIN will no longer
result to a reject of the two options, but only the second suboption
is ignored. That seems OK to do that for this unexpected error. At
least now all inconsistent combinations are handled the same way.
This could change later in next. This also means the explicit checks
for having both MPC + MPJ in subflow.c will now be unreachable.
That's fine, they will be removed in a follow-up patch.
- In case of conflicting combinations, the extra suboption(s) is/are
ignored: having such combinations either means the remote peer is
buggy, or is evil. The simplest action is then taken in this case:
stop processing the current suboption.
- In mp_opt->suboptions, there is also a bit reserved to the checksum,
which can be used in an MP_CAPABLE and a DSS. Each time a DSS option
can be used in parallel with another option, the checksum can be set,
so the verification is combined into a new OPTIONS_MPTCP_DSS macro.
- An MP_CAPABLE ACK can carry a Data-Level Length, and an optional
Checksum: they are the same as the ones found in a DSS, because a DSS
cannot be used in parallel to an MP_CAPABLE. Similarly, even if there
is room, a DSS cannot be used with an MP_JOIN. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: reclaim forward-allocated memory on RX path errors
After commit 9db5b3cec4ec ("mptcp: borrow forward memory from subflow"),
errors in the receive path prior to queueing skbs into the receive
queue do not trigger forward-allocated memory reclaiming.
Prevent forward memory from growing unboundedly in pathological drop
scenarios by explicitly reclaiming memory when skbs are dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
block: stop the timeout timer when releasing a never added disk
disk_release() undoes blk_mq_init_allocated_queue() for a disk whose
probe failed before add_disk(), but it only calls blk_mq_exit_queue().
Nothing there stops q->timeout, and that timer rolls forward: it stays
pending until it next expires, not until the last request completes.
So if the driver issued any I/O before adding the disk, the
request_queue is freed while still linked into a timer wheel bucket.
Commit 6f8191fdf41d ("block: simplify disk shutdown") dropped the
blk_cleanup_queue() call that used to stop it. __del_gendisk() and
blk_mq_destroy_queue() still do; only the probe failure path lost it.
nvme gets there because nvme_update_ns_info() submits Report Zones or
FDP io-mgmt-recv on ns->queue before the disk is added, so a later
failure - a concurrent reset setting NVME_CTRL_FROZEN, or
device_add_disk() failing - lands in put_disk() with the timer armed:
BUG: KASAN: slab-use-after-free in detach_if_pending+0x30c/0x340
Write of size 8 at addr ffff888004d71310 by task kworker/u8:2/37
__timer_delete_sync+0x156/0x240 kernel/time/timer.c:1621
blk_sync_queue+0x22/0x40 block/blk-core.c:222
nvme_sync_queues+0x100/0x150 drivers/nvme/host/core.c:5362
nvme_reset_work+0x138/0x930 drivers/nvme/host/pci.c:3264
Allocated by task 34:
__blk_mq_alloc_disk+0x33/0x100 block/blk-mq.c:4462
nvme_alloc_ns+0x290/0x3870 drivers/nvme/host/core.c:4146
Freed by task 0:
blk_free_queue_rcu+0x3a/0x50 block/blk-core.c:254
rcu_core+0xc10/0x1730 kernel/rcu/tree.c:2857
The queue being synced there is ctrl->admin_q, only a victim sharing a
timer wheel bucket with the freed queue's dangling entry; other runs
tripped in enqueue_timer(), __run_timers() or blk_mq_timeout_work().
Failing nvme_alloc_ns() with a debug patch makes it deterministic: one
leaked timer trips KASAN within seconds, while 1987 patched releases
produced no splat.
Stop the timer and the queue work items before blk_mq_exit_queue(), like
blk_mq_destroy_queue() does.
Found by FuzzNvme. |
| Use after free in Chromoting in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via crafted network traffic. (Chromium security severity: Medium) |
| Race condition in Enterprise in Google Chrome on on Windows prior to 152.0.7977.65 allowed an adjacent attacker to potentially execute arbitrary code outside the sandbox via crafted network traffic. (Chromium security severity: Low) |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| An Unchecked Input for Loop Condition vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS).Micro-BFD session flaps generate respective up/down events which are queued by PFEMAN for processing. Especially in a Virtual-Chassis (VC) scenario with locality‑bias configured, processing takes a significant amount of time for each event. If these sessions keep flapping, new events are constantly added, and in turn PFEMAN never completes processing these events. This results in the PFEMAN watchdog timer expiring, which causes the FPC to crash and restart, representing a complete service outage.
This issue only affects MX series FPCs up to and including MPC9, and LC2101/2103 and LC480. It does not affect MPC10/11, LC4800/9600, and MX304.
This issue affects Junos OS on MX Series:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S8,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2-S3,
* 25.2 versions before 25.2R2. |
| The implementation of this ioctl attempts to acquire locks on all channels in a sync group. If locking a channel would block, it releases the sync group list lock and sleeps. Upon reawakening, it is possible that the sync group structure is freed, but the implementation did not handle this possibility.
On a system with a multiple audio devices, an unprivileged local user can exploit this use-after-free to escalate privileges. |
| LcpDecodeConfig() did not validate the length of received endpoint discriminator options against the minimum required by RFC 1717. Undersized options would trigger an out-of-bounds write.
A malicious PPP peer can exploit CVE-2026-58095 and CVE-2026-58096 to crash ppp(8) or potentially execute arbitrary code as root. |
| A Missing Authentication for Critical Function vulnerability in command processing of Juniper Networks Junos OS allows a privileged local attacker to gain access to Linux-based line cards as root.
This issue affects systems running Junos OS using Linux-based line cards. Affected line cards include:
* MPC7, MPC8, MPC9, MPC10, MPC11
* LC2101, LC2103
* LC480, LC4800, LC9600
* MX304 (built-in FPC)
* MX-SPC3
* SRX5K-SPC3
* EX9200-40XS
* FPC3-PTX-U2, FPC3-PTX-U3
* FPC3-SFF-PTX
* LC1101, LC1102, LC1104, LC1105
This issue affects Junos OS:
* all versions before 22.4R3-S8,
* from 23.2 before 23.2R2-S6,
* from 23.4 before 23.4R2-S6,
* from 24.2 before 24.2R2-S3,
* from 24.4 before 24.4R2,
* from 25.2 before 25.2R2. |
| ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-78270. Reason: This candidate is a reservation duplicate of CVE-2026-78270. Notes: All CVE users should reference CVE-2026-78270 instead of this candidate. All references and descriptions in this candidate have been removed to prevent accidental usage. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: tegra - fix rctx->cryptlen calculation in tegra_gcm_do_one_req()
Perform rctx->cryptlen calculation in tegra_gcm_do_one_req() the same way
it is done in tegra_ccm_crypt_init(). The current formulae may lead to a
crash if a caller does not call tegra_gcm_setauthsize() and so ctx->authsize
remains zero. Then a decrypt operation with incorrect rctx->cryptlen will
lead to a write beyound rctx->dst_sg buffer.
As a follow-up cleanup delete struct tegra_aead_ctx->authsize field since
it appears to be completely unused. Also simplify tegra_ccm_setauthsize()
and tegra_gcm_setauthsize() functions respectively. |
| In the Linux kernel, the following vulnerability has been resolved:
optee: ffa: Add NULL check in optee_ffa_lend_protmem
Sashiko (locally) reports a possible null dereference under memory
pressure due to the lack of validation of the allocated pointer.
Fix that by adding the missing check. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't swallow dquot recovery verification errors
xlog_recover_dquot_commit_pass2() validates the recovered dquot with
xfs_dqblk_verify() and, on failure, sets error = -EFSCORRUPTED and jumps
to out_release. But out_release unconditionally returns 0, so the
corruption error is discarded: the caller xlog_recover_items_pass2()
sees success, log recovery proceeds as if the dquot were valid, and the
corrupt quota buffer can be written back to disk. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix exchange-range reflink flag clearing issue with INO1_WRITTEN
When exchanging two full-file ranges, xmi_can_exchange_reflink_flags()
can move the reflink inode flag from the file that currently has it to
the other file, as long as exactly one side is marked. This assumes
that the file contents, and therefore all shared extents, are exchanged.
That assumption is not true when XFS_EXCHMAPS_INO1_WRITTEN is set.
xfs_exchmaps_can_skip_mapping() can skip hole and unwritten mappings
from file1, so an exchange can complete without moving every mapping
that the earlier flag-swap decision accounted for. In that case the
post-operation cleanup can clear the reflink flag from an inode that
still owns shared written extents. Later writes then take the
non-reflink write path and may update blocks that should still have
been protected by CoW, which shows up as data corruption between
reflink-related files.
Fix this by disabling the reflink flag exchange whenever
XFS_EXCHMAPS_INO1_WRITTEN is requested. The contents exchange can still
proceed; the conservative outcome is that both inodes keep the reflink
flag. The regular reflink flag cleanup path can drop the extra flag
later once the inode no longer has shared extents. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix another iunlink infinite loop bug in online fsck
xrep_iunlink_resolve_bucket is supposed to reconstruct as much of the
incore prev and next unlinked list pointers based on what it finds on
disk and in memory before we move on to relinking the truly lost inodes
back into the unlinked list. However, it's still vulnerable to infinite
loops that come in via the next_unlinked pointers.
Fix this problem by remembering which inodes we've already seen and
checking new agino pointers against that. If a bit is already set,
either this is a loop or the inode has nonzero link count. We'll deal
with the second case in a subsequent patch. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't double-lock when deleting a self-referential directory
LOLLM notices that the dirtree scrubber can detect a directory that
refers to itself. In this case, it's not correct for the directory tree
repair code to try to iolock/ilock both sc->ip and dp, because they're
the same inode. Fix this by detecting that corner case and handling it
appropriately. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Ensure first IDAW remains constant
The first IDAW in a list does not need to be on a 2K/4K boundary
like all others, and so is read separately to accurately calculate
the size of the buffer needed to read the full IDAL.
Verify that the address found in the first IDAW is unchanged between
reads, to ensure a consistent set of IDAWs being worked with. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Cancel existing workqueues
The initialization of the io_work and crw_work workqueues begs the
question of whether they should be un-initialized. Add the corresponding
cleanup tags in _release_dev to ensure work isn't dispatched after
the private struct is free'd. |
