| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix warning in poll cq direct mode
CQs allocated by ib_alloc_cq() always have a comp_handler. Though
in direct mode this handler is never expected to be called, it
is still called when the driver is reset, triggering the following
WARN_ONCE():
Call trace:
ib_cq_completion_direct+0x38/0x60
hns_roce_cq_completion+0x54/0x90 (hns_roce_hw_v2]
hns_roce_handle_device_err+Ox1c8/0x340 [hns_roce_hw_v2]
hns_roce_hw_v2_uninit_instance.constprop.0+0x34/0x70 [hns_roce_hw_v2]
hns_roce_hw_v2_reset_notify+0xc4/0xe0 [hns_roce_hw_v2]
hclge_notify_roce_client+0x60/0xbc [hclge]
hclge_reset_rebuild+0x48/0x34c [hclge]
hclge_reset_subtask+0xcc/0xec [hclge]
hclge_reset_service_task+0x80/0x160 [hclge]
hclge_service_task+0x50/0x80 (hclge]
process_one_work+0x1cc/0x4d0
worker_thread+0x154/0x414
kthread+0x104/0x144
ret_from_fork+0x10/0x18 |
| In the Linux kernel, the following vulnerability has been resolved:
openrisc: signal: do not restore privileged SR bits on sigreturn
restore_sigcontext() copies the whole supervision register (SR) from the
signal frame and only clears SPR_SR_SM before the value is reloaded into
the hardware SR (through ESR and l.rfe) on the return to user space. All
other SR bits are left under user control.
An unprivileged task can thus return from a signal handler through a
crafted sigframe that clears SPR_SR_DME. With the data MMU disabled the
CPU performs no translation or protection on data accesses, so the task
gains read and write access to arbitrary physical memory, a local
privilege escalation. SPR_SR_IME, SPR_SR_SUMRA, SPR_SR_LEE, SPR_SR_EPH
and the cache-enable bits are exposed the same way. The ptrace GPR regset
already refuses any change to SR for exactly this reason.
Restore only the arithmetic flag bits (F, CY, OV) from the signal frame
and take every privileged control bit from the SR the kernel saved on
signal entry.
Verified with qemu-system-or1k -M or1k-sim: before this change an
unprivileged PoC clears SPR_SR_DME in rt_sigreturn and writes a marker to
physical address 0x03000000 (beyond the kernel's mem=32M); afterwards the
same PoC receives SIGSEGV and physical memory is unchanged. |
| An integer overflow in the libswscale/utils.c component of FFmpeg N-122528-gdd2976b9e1 allows attackers to cause a Denial of Service (DoS) via supplying a crafted image file. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvlan: inherit needed_headroom and needed_tailroom from phy_dev
ipvlan devices inherit hard_header_len from phy_dev during ipvlan_init(),
but leave needed_headroom and needed_tailroom set to 0.
When the underlying phy_dev (or stacked lower device) requires extra headroom
or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or
veth with rx headroom), upper layers calculating packet headroom and tailroom
fail to reserve sufficient space.
This can result in reallocation overhead, skb headroom underflows, or KASAN
slab-use-after-free crashes when dev_hard_header() / ipvlan_hard_header()
prepends header data or when lower devices append tailroom.
Fix this by:
1. Inheriting needed_headroom and needed_tailroom from phy_dev in ipvlan_init().
2. Propagating needed_headroom and needed_tailroom updates to attached ipvlans
in ipvlan_device_event() when receiving NETDEV_FEAT_CHANGE events. |
| A security vulnerability has been detected in RooCodeInc Roo-Code up to 3.51.1. This affects the function fetch_instructions of the file malicious_mcp_server.py of the component MCP Integration Trust Model. The manipulation leads to code injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. Multiple isses were reported to the vendor beforehand. They explain, that "they all apply to Roo Code, a project we no longer support - the repository was archived a while ago, and we don't encourage anyone to use it." This vulnerability only affects products that are no longer supported by the maintainer. |
| There is no allow list for property keys when Spring Cloud Commons writable /actuator/env is enabled.
Spring Cloud Commons 5.0.0 - 5.0.2
Spring Cloud Commons 4.3.0 - 4.3.3
Spring Cloud Commons 4.0.0 - 4.2.6
Spring Cloud Commons 3.1.10 and earlier |
| Potential for improper filtering of HTTP headers in Spring Cloud Function.
Spring Cloud Function 5.0.0 - 5.0.3
Spring Cloud Function 4.3.0 - 4.3.4
Spring Cloud Function 4.2.0 - 4.2.7
Spring Cloud Function 3.2.16 and earlier |
| Potential for logging sensitive data in Spring Cloud Function Azure.
Spring Cloud Function 5.0.0 - 5.0.3
Spring Cloud Function 4.3.0 - 4.3.4
Spring Cloud Function 4.2.0 - 4.2.7 |
| The WPMU DEV Dashboard plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 5.0.1. This is due to inconsistent and ambiguous HMAC message construction between the unauthenticated `wdpsso_step1` and `wdpsso_step2` AJAX actions, where step 1 signs and discloses an unseparated concatenation of the token, state, redirect, and domain values, while step 2 verifies an unseparated concatenation that omits the domain field. This makes it possible for unauthenticated attackers, on sites connected to WPMU DEV with Hub SSO enabled and mapped to an administrator, to obtain a valid HMAC from step 1 and replay it to step 2 by moving the domain value into the redirect field, resulting in an authenticated administrator session. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: bnxt: avoid deadlock when canceling IRQ affinity notifier
Unregistering IRQ affinity notifiers waits for the callback synchronously.
bnxt takes the netdev instance lock in the notifier (to restart the queue)
and cancels the work under the same lock. This may obviously deadlock.
Move the restart to the async service task. The queue restart isn't
super time sensitive. Store the new TPH tag, schedule the task.
Safely canceling the service task is already ironed out.
In bnxt_request_irq() the order of registering notifier, affinity and
initial TPH programming has to be inverted. I think it was racy
previously since user may trigger an update as soon as notifier
is installed.
There's a small known gap - if pcie_tph_get_cpu_st() fails at init
and the target tag is 0 we may miss programming the entry.
This does not seem worth fixing, the code has skip-on-failure
all over the place, anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: defer key slot crypto freeing to workqueue
Key slots are released through a kref and the existing release path
frees the AEAD transforms from an RCU callback. That is not safe for all
crypto implementations: crypto_free_aead can sleep, for example when an
async or hardware implementation has teardown work to complete.
Use queue_rcu_work for key-slot release. This keeps the RCU grace period
needed by lockless key-slot readers, but runs the actual crypto teardown
from workqueue context where sleeping is allowed. Once the rcu_work
callback runs, pre-existing RCU readers are gone, and the final kref put
already proves that no transform user remains, so the worker can release
the AEAD transforms and free the slot directly.
The previous patch drains ovpn_wq during module exit, so queued key-slot
teardown work cannot outlive module text. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Reject exited events as group leaders
perf_event_remove_on_exec() sets remove-on-exec events to the EXIT state
and detaches their group relationships. The event's file descriptor can
remain open, however, and perf_event_open() currently accepts that event
as a group leader because its early validation rejects only REVOKED and
DEAD events.
A new sibling can consequently be linked to the detached leader. When
the leader is closed, perf_group_detach() observes that its
PERF_ATTACH_GROUP bit is already clear and skips the new sibling. The
sibling then retains a group_leader pointer to the freed event.
Reject group leaders in the EXIT state. Perform the check while holding
the shared context mutex so that an exec in the target task cannot detach
the leader between validation and group attachment.
[peterz: make the earlier test fully consistent] |
| The static resource interface /api/static/{deployKey}/ of Yu AI Code Mother v4.3 is vulnerable to path traversal. The user-controlled path is concatenated to the preview root directory without any normalization, allowing anonymous attackers to read files outside the preview root. |
| go-wind-cms (GoWind) before 1.0.0 has a missing authorization vulnerability. The NewAuthorizer() function in app/admin/service/internal/data/data.go and app/app/service/internal/data/data.go returns a no-op authorization engine (noop.State{}), so the authz middleware always allows requests. Any authenticated user (regardless of role or tenant) can invoke administrative APIs such as deleting users, resetting passwords, and creating tenants. |
| PropertiesPersistingMetadataStore, the default file-based ConcurrentMetadataStore, persists its state to ${java.io.tmpdir}/spring-integration/metadata-store.properties with world-readable permissions.
Spring Integration 7.1.0
Spring Integration 7.0.0 - 7.0.5
Spring Integration 6.5.0 - 6.5.10
Spring Integration 6.4.0 - 6.4.12
Spring Integration 5.5.21 and earlier |
| A vulnerability in pentestgpt/core/langfuse.py in PentestGPT 1.0.0 allows remote attackers to disclose sensitive user telemetry data via hardcoded API credentials. |
| RedisChatMemoryRepository.findByMetadata() builds RediSearch tag and text queries from caller-supplied metadata values without applying RediSearchUtil.escape(), unlike get(), clear(), and findByTimeRange() in the same class which do escape their inputs. An application that passes user-controlled values to findByMetadata() on a tag-typed metadata field allows an attacker to inject RediSearch syntax (e.g. x} | *) that breaks out of the tag clause and matches all indexed chat messages across every conversation in the index.
Spring AI 2.0.0 |
| Stomper 5e2741e is vulnerable to Use-After-Free. When a client sends multiple CONNECT frames on the same TCP connection, and subsequently another client (or a later connection) sends SEND frames to a destination previously subscribed on that connection, the broker may dereference a pointer to a StompStreamSocket object that has already been freed. This results in a heap use-after-free and process crash. Because the protocol does not authenticate or restrict such sequences by default. |
| In Stomper 5e2741e when a client sends a SEND frame missing the destination header field, the server triggers a null pointer dereference (or access to invalid memory) while processing the frame, causing the process to crash. |
| An issue in Vanderbilt Industries, Acre Security SPC5300.000 Main Board v.3.14.1 allows a physically proximate attacker to cause a denial of service via spoofed TCP FIN packets without validating the sequence or acknowledgment numbers. |
