| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: fix OOB read in compat_mtw_from_user
Luxiao Xu says:
The function compat_mtw_from_user() converts ebtables extensions from
32-bit user structures to kernel native structures. However, it lacks
proper validation of the user-supplied match_size/target_size.
When certain extensions are processed, the kernel-side translation
logic may perform memory accesses based on the extension's expected
size. If the user provides a size smaller than what the extension
requires, it results in an out-of-bounds read as reported by KASAN.
This fix introduces a check to ensure match_size is at least as large
as the extension's required compatsize. This covers matches, watchers,
and targets, while maintaining compatibility with standard targets.
AFAIU this is relevant for matches that need to go though
match->compat_from_user() call. Those that use plain memcpy with the
user-provided size are ok because the caller checks that size vs the
start of the next rule entry offset (which itself is checked vs. total
size copied from userspace).
The ->compat_from_user() callbacks assume they can read compatsize bytes,
so they need this extra check.
Based on an earlier patch from Luxiao Xu. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL pointer dereference in bpf_sk_storage_clone and diag paths
bpf_selem_unlink_nofail() sets SDATA(selem)->smap to NULL before
removing the selem from the storage hlist. A concurrent RCU reader in
bpf_sk_storage_clone() can observe the selem still on the list with
smap already NULL, causing a NULL pointer dereference.
general protection fault, probably for non-canonical address 0xdffffc000000000a:
KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057]
RIP: 0010:bpf_sk_storage_clone+0x1cd/0xaa0 net/core/bpf_sk_storage.c:174
Call Trace:
<IRQ>
sk_clone+0xfed/0x1980 net/core/sock.c:2591
inet_csk_clone_lock+0x30/0x760 net/ipv4/inet_connection_sock.c:1222
tcp_create_openreq_child+0x35/0x2680 net/ipv4/tcp_minisocks.c:571
tcp_v4_syn_recv_sock+0x123/0xf90 net/ipv4/tcp_ipv4.c:1729
tcp_check_req+0x8e1/0x2580 include/net/tcp.h:855
tcp_v4_rcv+0x1845/0x3b80 net/ipv4/tcp_ipv4.c:2347
Add a NULL check for smap in bpf_sk_storage_clone().
bpf_sk_storage_diag_put_all() has the same issue. Add a NULL check
and pass the validated smap directly to diag_get(), which is refactored
to take smap as a parameter instead of reading it internally.
bpf_sk_storage_diag_put() uses diag->maps[i] which is always valid
under its refcount, so diag->maps[i] is passed directly to diag_get(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: avoid NULL deref of conn->lnk in smc_msg_event tracepoint
The smc_msg_event tracepoint class, shared by smc_tx_sendmsg and
smc_rx_recvmsg, unconditionally dereferences smc->conn.lnk:
__string(name, smc->conn.lnk->ibname)
conn->lnk is only set for SMC-R; for SMC-D it is NULL. Other code on
these paths already handles this (e.g. !conn->lnk in
SMC_STAT_RMB_TX_SIZE_SMALL()). With the tracepoint enabled, the first
sendmsg()/recvmsg() on an SMC-D socket crashes:
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [...]
RIP: 0010:strlen+0x1e/0xa0
Call Trace:
trace_event_raw_event_smc_msg_event (net/smc/smc_tracepoint.h:44)
smc_rx_recvmsg (net/smc/smc_rx.c:515)
smc_recvmsg (net/smc/af_smc.c:2859)
__sys_recvfrom (net/socket.c:2315)
__x64_sys_recvfrom (net/socket.c:2326)
do_syscall_64
The faulting address 0x3e0 is offsetof(struct smc_link, ibname),
confirming the NULL ->lnk deref. Enabling the tracepoint requires
root, but the trigger itself is unprivileged: socket(AF_SMC, ...) has
no capability check, and SMC-D negotiation needs no admin step on
s390 or on x86 with the loopback ISM device loaded.
Log an empty device name for SMC-D instead of dereferencing NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_log: validate MAC header was set before dumping it
The fallback path of dump_mac_header() guards the MAC header access
only with "skb->mac_header != skb->network_header", without checking
skb_mac_header_was_set(). When the MAC header is unset, mac_header is
0xffff, so the test passes and skb_mac_header(skb) returns
skb->head + 0xffff, ~64 KiB past the buffer; the loop then reads
dev->hard_header_len bytes out of bounds into the kernel log.
This is reachable via the netdev logger: nf_log_unknown_packet() calls
dump_mac_header() unconditionally, and an skb sent through AF_PACKET
with PACKET_QDISC_BYPASS reaches the egress hook with mac_header still
unset (__dev_queue_xmit(), which would reset it, is bypassed).
Add the skb_mac_header_was_set() check the ARPHRD_ETHER path already
uses, and replace the open-coded MAC header length test with
skb_mac_header_len(). Only skbs with an unset MAC header are affected;
valid ones are dumped as before.
BUG: KASAN: slab-out-of-bounds in dump_mac_header (net/netfilter/nf_log_syslog.c:831)
Read of size 1 at addr ffff88800ea49d3f by task exploit/148
Call Trace:
kasan_report (mm/kasan/report.c:595)
dump_mac_header (net/netfilter/nf_log_syslog.c:831)
nf_log_netdev_packet (net/netfilter/nf_log_syslog.c:938 net/netfilter/nf_log_syslog.c:963)
nf_log_packet (net/netfilter/nf_log.c:260)
nft_log_eval (net/netfilter/nft_log.c:60)
nft_do_chain (net/netfilter/nf_tables_core.c:285)
nft_do_chain_netdev (net/netfilter/nft_chain_filter.c:307)
nf_hook_slow (net/netfilter/core.c:619)
nf_hook_direct_egress (net/packet/af_packet.c:257)
packet_xmit (net/packet/af_packet.c:280)
packet_sendmsg (net/packet/af_packet.c:3114)
__sys_sendto (net/socket.c:2265) |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: fix missing zerocopy reference in pskb_carve helpers
pskb_carve_inside_header() and pskb_carve_inside_nonlinear() both copy
the old skb_shared_info header into a new buffer via memcpy(), which
includes the destructor_arg pointer (uarg) for MSG_ZEROCOPY skbs.
Neither function calls net_zcopy_get() for the new shinfo, creating an
unaccounted holder: every skb_shared_info with destructor_arg set will
call skb_zcopy_clear() once when freed, but the corresponding
net_zcopy_get() was never called for the new copy. Repeated calls
drive uarg->refcnt to zero prematurely, freeing ubuf_info_msgzc while
TX skbs still hold live destructor_arg pointers.
KASAN reports use-after-free on a freed ubuf_info_msgzc:
BUG: KASAN: slab-use-after-free in skb_release_data+0x77b/0x810
Read of size 8 at addr ffff88801574d3e8 by task poc/220
Call Trace:
skb_release_data+0x77b/0x810
kfree_skb_list_reason+0x13e/0x610
skb_release_data+0x4cd/0x810
sk_skb_reason_drop+0xf3/0x340
skb_queue_purge_reason+0x282/0x440
rds_tcp_inc_free+0x1e/0x30
rds_recvmsg+0x354/0x1780
__sys_recvmsg+0xdf/0x180
Allocated by task 219:
msg_zerocopy_realloc+0x157/0x7b0
tcp_sendmsg_locked+0x2892/0x3ba0
Freed by task 219:
ip_recv_error+0x74a/0xb10
tcp_recvmsg+0x475/0x530
The skb consuming the late access still referenced the same uarg via
shinfo->destructor_arg copied by pskb_carve_inside_nonlinear() without
a refcount bump. This has been verified to be reliably exploitable: a
working proof-of-concept achieves full root privilege escalation from
an unprivileged local user on a default kernel configuration.
The fix follows the pattern of pskb_expand_head() which has the same
memcpy/cloned structure. For pskb_carve_inside_header(), net_zcopy_get()
is placed after skb_orphan_frags() succeeds, so the orphan error path
needs no cleanup. For pskb_carve_inside_nonlinear(), net_zcopy_get() is
placed after all failure points and just before skb_release_data(), so
no error path needs cleanup at all -- matching pskb_expand_head() more
closely and avoiding the need for a balancing net_zcopy_put(). |
| Improper Validation of Specified Index, Position, or Offset in Input vulnerability in Google go-attestation. parseEfiSignatureList() does not advance the buffer past vendor bytes before reading entries. For hashSHA256SigGUID lists, this allows attacker-controlled vendor header bytes to be appended to the trusted SHA256 hash list. A crafted TPM event log could inject arbitrary SHA256 hashes into the verifier's trusted measurement database, enabling a remote attestation verifier to accept a compromised boot state. This issue affects go-attestation: through 0.6.0. |
| When using the "configparser" module to write configuration files
containing multi-line text values with carriage return characters (\r) the
resulting file could be injected with unexpected keys and values if the
attacker controls the written value. |
| GV-I/O Box 4E is a smart embedded device with 4 input and 4 relays output that can be controlled over Ethernet and RS-485.
DVRSearch is a service running by default on the IOBox listening for UDP messages on port 10001. Any user on the network can send messages to this service and interact with it.
Upon receiving a UDP message, the server reads at most 1460 bytes into a local buffer and a pointer to the buffer is stored in a global variable:
#### Net Mask field stack overflow
The following code is vulnerable to a stack overflow that is attacker-controlled:
v6 = strlen(g_network_config->net_mask);
memcpy(&reply_buf[184], g_network_config->net_mask, v6); |
| A memory corruption vulnerability exists in the GV-Cloud functionality of GeoVision GV-VMS V20 20.0.2.
A specially crafted network request can lead to a denial of service. An attacker can impersonate the legitimate server to trigger this vulnerability. |
| Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability.
`libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.)
#### CNetSetObj::m_F_n_Set_IP_Addr command injection
The following function takes a string as an ip address, performs no sanitization and calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint.
int __fastcall CNetSetObj::m_F_n_Set_IP_Addr(const char **this, char *ip_addr)
{
bool v2; // zf
char v4[72]; // [sp+0h] [bp-48h] BYREF
v2 = *this == 0;
if ( *this )
v2 = ip_addr == 0;
if ( v2 )
return 0;
sprintf(v4, "/sbin/ifconfig %s %s", *this, ip_addr); // attacker controlled ip address
system(v4);
return 1;
} |
| Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability.
`libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.)
#### CNetSetObj::m_F_n_Set_Net_Mask command injection
The following function takes a string as a net mask address, performs no sanitization on it and calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint.
int __fastcall CNetSetObj::m_F_n_Set_Net_Mask(const char **this, char *netmask_addr)
{
bool v2; // zf
char v4[72]; // [sp+0h] [bp-48h] BYREF
v2 = *this == 0;
if ( *this )
v2 = netmask_addr == 0;
if ( v2 )
return 0;
sprintf(v4, "/sbin/ifconfig %s netmask %s", *this, netmask_addr); // attacker controlled netmask_addr
system(v4);
return 1;
} |
| Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability.
`libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.)
#### CNetSetObj::m_F_n_Set_Gate_way command injection
The following function takes a string as a gatewy address, performs no sanitization on it and calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint.
int __fastcall CNetSetObj::m_F_n_Set_Gate_way(const char **this, char *gw, char *dev)
{
char s[324]; // [sp+4h] [bp-144h] BYREF
if ( !dev && !*this || !gw )
return 0;
system("/sbin/route del -net 224.0.0.0 netmask 224.0.0.0");
system("/sbin/route del default ");
if ( dev )
sprintf(s, "/sbin/route add default gw %s dev %s", gw, dev); //attacker controlled gw string
else
sprintf(s, "/sbin/route add default gw %s dev %s", gw, *this); //attacker controlled gw string
system(s);
sprintf(s, "/sbin/route add -net 224.0.0.0 netmask 224.0.0.0 gw %s dev %s", gw, *this); //attacker controlled gw string
system(s);
return 1;
} |
| GV-I/O Box 4E is a smart embedded device with 4 input and 4 relays output that can be controlled over Ethernet and RS-485.
DVRSearch is a service running by default on the IOBox listening for UDP messages on port 10001. Any user on the network can send messages to this service and interact with it.
Upon receiving a UDP message, the server reads at most 1460 bytes into a local buffer and a pointer to the buffer is stored in a global variable:
#### DNS field stack overflow
The following code is vulnerable to a stack overflow that is attacker-controlled:
v8 = strlen(g_network_config->dns_addr);
memcpy(&reply_buf[248], g_network_config->dns_addr, v8); |
| Flowise before 3.1.0 (versions 3.0.13 and earlier) contains a missing authentication vulnerability in the /api/v1/loginmethod endpoint that allows unauthenticated users to retrieve an organization's complete SSO configuration, including OAuth client secrets in cleartext, by providing an organizationId parameter. Remote attackers can send a GET request to harvest sensitive API credentials for Google, Microsoft/Azure, GitHub, and Auth0 integrations. This affects FlowiseAI Cloud and self-hosted instances where the endpoint is exposed. |
| An issue was discovered in Lantronix EDS5000 2.1.0.0R3. The HTTP RPC module executes a shell command to write logs when user's authantication fails. The username is directly concatenated with the command without any sanitization. This allow attackers to inject arbitrary OS commands into the username parameter. Injected commands are executed with root privileges. |
| An Improper Input Validation in Ivanti EPMM before versions 12.6.1.1, 12.7.0.1, and 12.8.0.1 allows a remotely authenticated user with administrative access to achieve remote code execution. |
| The Ultimate Member plugin for WordPress is vulnerable to Account Takeover via Password Reset Link Disclosure in all versions up to and including 2.11.4. This is due to a chain of three logic bugs: (1) an MD5 hash fallback in get_directory_by_hash() that allows any post to be used as a member directory by computing SUBSTRING(MD5(post_id), 11, 5), (2) a strstr() parsing logic flaw in post_data() that allows bypassing WordPress's protected meta key restrictions by placing '_um_' anywhere in the meta key name rather than at the start, and (3) missing field name validation in build_user_card_data() that allows arbitrary field names including 'password_reset_link' to be passed to um_filtered_value(). This makes it possible for authenticated attackers with Contributor-level access and above to create a malicious post via XMLRPC with crafted meta fields, use the MD5 fallback to point the member directory AJAX handler to their post, inject 'password_reset_link' into the tagline_fields configuration, and leak live password reset URLs for all users in the member directory response, including administrators. |
| n8n before version 2.4.0 contains a sql injection vulnerability in MySQL, PostgreSQL, and Microsoft SQL nodes that allows authenticated users to inject arbitrary SQL through unescaped identifier values in node configuration parameters. Attackers with workflow creation permissions can supply specially crafted table or column names to execute unauthorized database commands and compromise data integrity. |
| Traefik is an HTTP reverse proxy and load balancer. From 3.7.0-ea.1 until 3.7.5, there is a medium severity vulnerability in Traefik's Kubernetes Ingress NGINX provider that causes affected routes to fail open. When an Ingress explicitly enables BasicAuth or DigestAuth through the supported nginx.ingress.kubernetes.io/auth-type and auth-secret annotations, but the referenced auth Secret cannot be resolved or parsed, Traefik logs the resolution error, skips installing the authentication middleware, and still emits a router to the backend service. A route that operators intended to protect is therefore published to the data plane without its authentication control, allowing unauthenticated access to the backend. The trigger is an invalid or unresolved auth dependency — a missing, malformed, unreadable, or policy-denied Secret — rather than an intentionally unprotected route. This vulnerability is fixed in 3.7.5. |
| NocoDB is software for building databases as spreadsheets. Prior to 2026.05.1, an authenticated user with column-create permission can inject SQL into the bulk groupBy endpoint by setting a column's title to a SQL fragment. The bulk groupBy path in group-by.ts builds three database-specific knex.raw() aggregations that interpolate the request's column_name directly into the SQL string. Column lookup in data-table.service.ts matches on both the sanitized column_name field and the free-text title, so a title containing a SQL fragment bypasses the public endpoint's existing column allowlist and reaches the query builder unescaped. This vulnerability is fixed in 2026.05.1. |
