| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix use of wrong skb when comparing queued RESP challenge serial
In rxrpc_post_response(), the code should be comparing the challenge serial
number from the cached response before deciding to switch to a newer
response, but looks at the newer packet private data instead, rendering the
comparison always false.
Fix this by switching to look at the older packet.
Fix further[1] to substitute the new packet in place of the old one if
newer and also to release whichever we don't use. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix key parsing memleak
In rxrpc_preparse_xdr_yfs_rxgk(), the memory attached to token->rxgk can be
leaked in a few error paths after it's allocated.
Fix this by freeing it in the "reject_token:" case. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: fix use-after-free and leak in lan966x_fdma_reload()
When lan966x_fdma_reload() fails to allocate new RX buffers, the restore
path restarts DMA using old descriptors whose pages were already freed
via lan966x_fdma_rx_free_pages(). Since page_pool_put_full_page() can
release pages back to the buddy allocator, the hardware may DMA into
memory now owned by other kernel subsystems.
Additionally, on the restore path, the newly created page pool (if
allocation partially succeeded) is overwritten without being destroyed,
leaking it.
Fix both issues by deferring the release of old pages until after the
new allocation succeeds. Save the old page array before the allocation
so old pages can be freed on the success path. On the failure path, the
old descriptors, pages and page pool are all still valid, making the
restore safe. Also ensure the restore path re-enables NAPI and wakes
the netdev, matching the success path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: fix page pool leak in error paths
lan966x_fdma_rx_alloc() creates a page pool but does not destroy it if
the subsequent fdma_alloc_coherent() call fails, leaking the pool.
Similarly, lan966x_fdma_init() frees the coherent DMA memory when
lan966x_fdma_tx_alloc() fails but does not destroy the page pool that
was successfully created by lan966x_fdma_rx_alloc(), leaking it.
Add the missing page_pool_destroy() calls in both error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: filemap: fix nr_pages calculation overflow in filemap_map_pages()
When running stress-ng on my Arm64 machine with v7.0-rc3 kernel, I
encountered some very strange crash issues showing up as "Bad page state":
"
[ 734.496287] BUG: Bad page state in process stress-ng-env pfn:415735fb
[ 734.496427] page: refcount:0 mapcount:1 mapping:0000000000000000 index:0x4cf316 pfn:0x415735fb
[ 734.496434] flags: 0x57fffe000000800(owner_2|node=1|zone=2|lastcpupid=0x3ffff)
[ 734.496439] raw: 057fffe000000800 0000000000000000 dead000000000122 0000000000000000
[ 734.496440] raw: 00000000004cf316 0000000000000000 0000000000000000 0000000000000000
[ 734.496442] page dumped because: nonzero mapcount
"
After analyzing this page’s state, it is hard to understand why the
mapcount is not 0 while the refcount is 0, since this page is not where
the issue first occurred. By enabling the CONFIG_DEBUG_VM config, I can
reproduce the crash as well and captured the first warning where the issue
appears:
"
[ 734.469226] page: refcount:33 mapcount:0 mapping:00000000bef2d187 index:0x81a0 pfn:0x415735c0
[ 734.469304] head: order:5 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 734.469315] memcg:ffff000807a8ec00
[ 734.469320] aops:ext4_da_aops ino:100b6f dentry name(?):"stress-ng-mmaptorture-9397-0-2736200540"
[ 734.469335] flags: 0x57fffe400000069(locked|uptodate|lru|head|node=1|zone=2|lastcpupid=0x3ffff)
......
[ 734.469364] page dumped because: VM_WARN_ON_FOLIO((_Generic((page + nr_pages - 1),
const struct page *: (const struct folio *)_compound_head(page + nr_pages - 1), struct page *:
(struct folio *)_compound_head(page + nr_pages - 1))) != folio)
[ 734.469390] ------------[ cut here ]------------
[ 734.469393] WARNING: ./include/linux/rmap.h:351 at folio_add_file_rmap_ptes+0x3b8/0x468,
CPU#90: stress-ng-mlock/9430
[ 734.469551] folio_add_file_rmap_ptes+0x3b8/0x468 (P)
[ 734.469555] set_pte_range+0xd8/0x2f8
[ 734.469566] filemap_map_folio_range+0x190/0x400
[ 734.469579] filemap_map_pages+0x348/0x638
[ 734.469583] do_fault_around+0x140/0x198
......
[ 734.469640] el0t_64_sync+0x184/0x188
"
The code that triggers the warning is: "VM_WARN_ON_FOLIO(page_folio(page +
nr_pages - 1) != folio, folio)", which indicates that set_pte_range()
tried to map beyond the large folio’s size.
By adding more debug information, I found that 'nr_pages' had overflowed
in filemap_map_pages(), causing set_pte_range() to establish mappings for
a range exceeding the folio size, potentially corrupting fields of pages
that do not belong to this folio (e.g., page->_mapcount).
After above analysis, I think the possible race is as follows:
CPU 0 CPU 1
filemap_map_pages() ext4_setattr()
//get and lock folio with old inode->i_size
next_uptodate_folio()
.......
//shrink the inode->i_size
i_size_write(inode, attr->ia_size);
//calculate the end_pgoff with the new inode->i_size
file_end = DIV_ROUND_UP(i_size_read(mapping->host), PAGE_SIZE) - 1;
end_pgoff = min(end_pgoff, file_end);
......
//nr_pages can be overflowed, cause xas.xa_index > end_pgoff
end = folio_next_index(folio) - 1;
nr_pages = min(end, end_pgoff) - xas.xa_index + 1;
......
//map large folio
filemap_map_folio_range()
......
//truncate folios
truncate_pagecache(inode, inode->i_size);
To fix this issue, move the 'end_pgoff' calculation before
next_uptodate_folio(), so the retrieved folio stays consistent with the
file end to avoid
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: vub300: fix use-after-free on disconnect
The vub300 driver maintains an explicit reference count for the
controller and its driver data and the last reference can in theory be
dropped after the driver has been unbound.
This specifically means that the controller allocation must not be
device managed as that can lead to use-after-free.
Note that the lifetime is currently also incorrectly tied the parent USB
device rather than interface, which can lead to memory leaks if the
driver is unbound without its device being physically disconnected (e.g.
on probe deferral).
Fix both issues by reverting to non-managed allocation of the controller. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: vub300: fix NULL-deref on disconnect
Make sure to deregister the controller before dropping the reference to
the driver data on disconnect to avoid NULL-pointer dereferences or
use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: imx8mp-blk-ctrl: Keep the NOC_HDCP clock enabled
Keep the NOC_HDCP clock always enabled to fix the potential hang
caused by the NoC ADB400 port power down handshake. |
| In the Linux kernel, the following vulnerability has been resolved:
net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit()
When dma_map_single() fails in tse_start_xmit(), the function returns
NETDEV_TX_OK without freeing the skb. Since NETDEV_TX_OK tells the
stack the packet was consumed, the skb is never freed, leaking memory
on every DMA mapping failure.
Add dev_kfree_skb_any() before returning to properly free the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: allocate rx skb before consuming bytes
pn532_receive_buf() reports the number of accepted bytes to the serdev
core. The current code consumes bytes into recv_skb and may already hand
a complete frame to pn533_recv_frame() before allocating a fresh receive
buffer.
If that alloc_skb() fails, the callback returns 0 even though it has
already consumed bytes, and it leaves recv_skb as NULL for the next
receive callback. That breaks the receive_buf() accounting contract and
can also lead to a NULL dereference on the next skb_put_u8().
Allocate the receive skb lazily before consuming the next byte instead.
If allocation fails, return the number of bytes already accepted. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmsmac: Fix dma_free_coherent() size
dma_alloc_consistent() may change the size to align it. The new size is
saved in alloced.
Change the free size to match the allocation size. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix bc_ackers underflow on duplicate GRP_ACK_MSG
The GRP_ACK_MSG handler in tipc_group_proto_rcv() currently decrements
bc_ackers on every inbound group ACK, even when the same member has
already acknowledged the current broadcast round.
Because bc_ackers is a u16, a duplicate ACK received after the last
legitimate ACK wraps the counter to 65535. Once wrapped,
tipc_group_bc_cong() keeps reporting congestion and later group
broadcasts on the affected socket stay blocked until the group is
recreated.
Fix this by ignoring duplicate or stale ACKs before touching bc_acked or
bc_ackers. This makes repeated GRP_ACK_MSG handling idempotent and
prevents the underflow path. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: hold dev ref until after transport_finish NF_HOOK
After async crypto completes, xfrm_input_resume() calls dev_put()
immediately on re-entry before the skb reaches transport_finish.
The skb->dev pointer is then used inside NF_HOOK and its okfn,
which can race with device teardown.
Remove the dev_put from the async resumption entry and instead
drop the reference after the NF_HOOK call in transport_finish,
using a saved device pointer since NF_HOOK may consume the skb.
This covers NF_DROP, NF_QUEUE and NF_STOLEN paths that skip
the okfn.
For non-transport exits (decaps, gro, drop) and secondary
async return points, release the reference inline when
async is set. |
| In the Linux kernel, the following vulnerability has been resolved:
net: rfkill: prevent unlimited numbers of rfkill events from being created
Userspace can create an unlimited number of rfkill events if the system
is so configured, while not consuming them from the rfkill file
descriptor, causing a potential out of memory situation. Prevent this
from bounding the number of pending rfkill events at a "large" number
(i.e. 1000) to prevent abuses like this. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: make use of smbdirect_socket.recv_io.credits.available
The logic off managing recv credits by counting posted recv_io and
granted credits is racy.
That's because the peer might already consumed a credit,
but between receiving the incoming recv at the hardware
and processing the completion in the 'recv_done' functions
we likely have a window where we grant credits, which
don't really exist.
So we better have a decicated counter for the
available credits, which will be incremented
when we posted new recv buffers and drained when
we grant the credits to the peer. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: let send_done handle a completion without IB_SEND_SIGNALED
With smbdirect_send_batch processing we likely have requests without
IB_SEND_SIGNALED, which will be destroyed in the final request
that has IB_SEND_SIGNALED set.
If the connection is broken all requests are signaled
even without explicit IB_SEND_SIGNALED. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix missing runtime PM reference in ccs_mode_store
ccs_mode_store() calls xe_gt_reset() which internally invokes
xe_pm_runtime_get_noresume(). That function requires the caller
to already hold an outer runtime PM reference and warns if none
is held:
[46.891177] xe 0000:03:00.0: [drm] Missing outer runtime PM protection
[46.891178] WARNING: drivers/gpu/drm/xe/xe_pm.c:885 at
xe_pm_runtime_get_noresume+0x8b/0xc0
Fix this by protecting xe_gt_reset() with the scope-based
guard(xe_pm_runtime)(xe), which is the preferred form when
the reference lifetime matches a single scope.
v2:
- Use scope-based guard(xe_pm_runtime)(xe) (Shuicheng)
- Update commit message accordingly
(cherry picked from commit 7937ea733f79b3f25e802a0c8360bf7423856f36) |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: bcm: bcm2835-power: Increase ASB control timeout
The bcm2835_asb_control() function uses a tight polling loop to wait
for the ASB bridge to acknowledge a request. During intensive workloads,
this handshake intermittently fails for V3D's master ASB on BCM2711,
resulting in "Failed to disable ASB master for v3d" errors during
runtime PM suspend. As a consequence, the failed power-off leaves V3D in
a broken state, leading to bus faults or system hangs on later accesses.
As the timeout is insufficient in some scenarios, increase the polling
timeout from 1us to 5us, which is still negligible in the context of a
power domain transition. Also, replace the open-coded ktime_get_ns()/
cpu_relax() polling loop with readl_poll_timeout_atomic(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wlcore: Return -ENOMEM instead of -EAGAIN if there is not enough headroom
Since upstream commit e75665dd0968 ("wifi: wlcore: ensure skb headroom
before skb_push"), wl1271_tx_allocate() and with it
wl1271_prepare_tx_frame() returns -EAGAIN if pskb_expand_head() fails.
However, in wlcore_tx_work_locked(), a return value of -EAGAIN from
wl1271_prepare_tx_frame() is interpreted as the aggregation buffer being
full. This causes the code to flush the buffer, put the skb back at the
head of the queue, and immediately retry the same skb in a tight while
loop.
Because wlcore_tx_work_locked() holds wl->mutex, and the retry happens
immediately with GFP_ATOMIC, this will result in an infinite loop and a
CPU soft lockup. Return -ENOMEM instead so the packet is dropped and
the loop terminates.
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: move async event work off nvmet-wq
For target nvmet_ctrl_free() flushes ctrl->async_event_work.
If nvmet_ctrl_free() runs on nvmet-wq, the flush re-enters workqueue
completion for the same worker:-
A. Async event work queued on nvmet-wq (prior to disconnect):
nvmet_execute_async_event()
queue_work(nvmet_wq, &ctrl->async_event_work)
nvmet_add_async_event()
queue_work(nvmet_wq, &ctrl->async_event_work)
B. Full pre-work chain (RDMA CM path):
nvmet_rdma_cm_handler()
nvmet_rdma_queue_disconnect()
__nvmet_rdma_queue_disconnect()
queue_work(nvmet_wq, &queue->release_work)
process_one_work()
lock((wq_completion)nvmet-wq) <--------- 1st
nvmet_rdma_release_queue_work()
C. Recursive path (same worker):
nvmet_rdma_release_queue_work()
nvmet_rdma_free_queue()
nvmet_sq_destroy()
nvmet_ctrl_put()
nvmet_ctrl_free()
flush_work(&ctrl->async_event_work)
__flush_work()
touch_wq_lockdep_map()
lock((wq_completion)nvmet-wq) <--------- 2nd
Lockdep splat:
============================================
WARNING: possible recursive locking detected
6.19.0-rc3nvme+ #14 Tainted: G N
--------------------------------------------
kworker/u192:42/44933 is trying to acquire lock:
ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90
but task is already holding lock:
ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660
3 locks held by kworker/u192:42/44933:
#0: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660
#1: ffffc9000e6cbe28 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x660
#2: ffffffff82d4db60 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530
Workqueue: nvmet-wq nvmet_rdma_release_queue_work [nvmet_rdma]
Call Trace:
__flush_work+0x268/0x530
nvmet_ctrl_free+0x140/0x310 [nvmet]
nvmet_cq_put+0x74/0x90 [nvmet]
nvmet_rdma_free_queue+0x23/0xe0 [nvmet_rdma]
nvmet_rdma_release_queue_work+0x19/0x50 [nvmet_rdma]
process_one_work+0x206/0x660
worker_thread+0x184/0x320
kthread+0x10c/0x240
ret_from_fork+0x319/0x390
Move async event work to a dedicated nvmet-aen-wq to avoid reentrant
flush on nvmet-wq. |
