| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime with its Winch (baseline) non-default compiler backend may allow properly constructed guest Wasm to access host memory outside of its linear-memory sandbox. This vulnerability requires use of the Winch compiler (-Ccompiler=winch). By default, Wasmtime uses its Cranelift backend, not Winch. With Winch, the same incorrect assumption is present in theory on both aarch64 and x86-64. The aarch64 case has an observed-working proof of concept, while the x86-64 case is theoretical and may not be reachable in practice. This Winch compiler bug can allow the Wasm guest to access memory before or after the linear-memory region, independently of whether pre- or post-guard regions are configured. The accessible range in the initial bug proof-of-concept is up to 32KiB before the start of memory, or ~4GiB after the start of memory, independently of the size of pre- or post-guard regions or the use of explicit or guard-region-based bounds checking. However, the underlying bug assumes a 32-bit memory offset stored in a 64-bit register has its upper bits cleared when it may not, and so closely related variants of the initial proof-of-concept may be able to access truly arbitrary memory in-process. This could result in a host process segmentation fault (DoS), an arbitrary data leak from the host process, or with a write, potentially an arbitrary RCE. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| dag-factory is a library for Apache Airflow® to construct DAGs declaratively via configuration files. In versions 0.23.0a8 and below, a high-severity vulnerability has been identified in the cicd.yml workflow within the astronomer/dag-factory GitHub repository. The workflow, specifically when triggered by pull_request_target, is susceptible to exploitation, allowing an attacker to execute arbitrary code within the GitHub Actions runner environment. This misconfiguration enables an attacker to establish a reverse shell, exfiltrate sensitive secrets, including the highly-privileged GITHUB_TOKEN, and ultimately gain full control over the repository. This is fixed in version 0.23.0a9. |
| DeepDiff is a project focused on Deep Difference and search of any Python data. Versions 5.0.0 through 8.6.0 are vulnerable to class pollution via the Delta class constructor, and when combined with a gadget available in DeltaDiff, it can lead to Denial of Service and Remote Code Execution (via insecure Pickle deserialization) exploitation. The gadget available in DeepDiff allows `deepdiff.serialization.SAFE_TO_IMPORT` to be modified to allow dangerous classes such as posix.system, and then perform insecure Pickle deserialization via the Delta class. This potentially allows any Python code to be executed, given that the input to Delta is user-controlled. Depending on the application where DeepDiff is used, this can also lead to other vulnerabilities. This is fixed in version 8.6.1. |
| dotCMS versions 24.03.22 and after, identified a Boolean-based blind SQLi vulnerability in the /api/v1/contenttype endpoint. This endpoint uses the sites query parameter, which accepts a comma-separated list of site identifiers or keys.
The vulnerability was triggered via the sites parameter, which was directly concatenated into a SQL query without proper sanitization.
Exploitation allowed an authenticated attacker with low privileges to extract data from database, perform privilege escalation, or trigger denial-of-service conditions.
The vulnerability was verified using tools such as SQLMap and confirmed to allow full database exfiltration and potential denial-of-service conditions via crafted payloads.
The vulnerability is fixed in the following versions of dotCMS stack: 25.08.14 / 25.07.10-1v2 LTS / 24.12.27v10 LTS / 24.04.24v21 LTS |
| In versions before 20.0.2, it was found that --disallow-code-generation-from-strings is not sufficient for isolating untrusted JavaScript in happy-dom. The untrusted script and the rest of the application still run in the same Isolate/process, so attackers can deploy prototype pollution payloads to hijack important references like "process" in the example below, or to hijack control flow via flipping checks of undefined property. This vulnerability is due to an incomplete fix for CVE-2025-61927. The vulnerability is fixed in 20.0.2. |
| VestaCP commit a3f0fa1 (2018-05-31) up to commit ee03eff (2018-06-13) contain embedded malicious code that resulted in a supply-chain compromise. New installations created from the compromised installer since at least May 2018 were subject to installation of Linux/ChachaDDoS, a multi-stage DDoS bot that uses Lua for second- and third-stage components. The compromise leaked administrative credentials (base64-encoded admin password and server domain) to an external URL during installation and/or resulted in the installer dropping and executing a DDoS malware payload under local system privileges. Compromised servers were subsequently observed participating in large-scale DDoS activity. Vesta acknowledged exploitation in the wild in October 2018. |
| Valve's Source SDK (source-sdk-2013)'s ragdoll model parsing logic contains a stack-based buffer overflow vulnerability.The tokenizer function `nexttoken` copies characters from an input string into a fixed-size stack buffer without performing bounds checks. When `ParseKeyValue` processes a collisionpair rule longer than the destination buffer (256 bytes), an overflow of the stack buffer `szToken` can occur and overwrite the function return address. A remote attacker can trigger the vulnerable code by supplying a specially crafted ragdoll model which causes the oversized collisionpair rule to be parsed, resulting in remote code execution on affected clients or servers. Valve has addressed this issue in many of their Source games, but independently-developed games must manually apply patch. |
| DBLTek GoIP devices (models GoIP 1, 4, 8, 16, and 32) contain an undocumented vendor backdoor in the Telnet administrative interface that allows remote authentication as an undocumented user via a proprietary challenge–response scheme which is fundamentally flawed. Because the challenge response can be computed from the challenge itself, a remote attacker can authenticate without knowledge of a secret and obtain a root shell on the device. This can lead to persistent remote code execution, full device compromise, and arbitrary control of the device and any managed services. The firmware used within these devices was updated in December 2016 to make this vulnerability more complex to exploit. However, it is unknown if DBLTek has taken steps to fully mitigate. |
| A remote code execution vulnerability exists in HybridAuth versions 2.0.9 through 2.2.2 due to insecure use of the install.php installation script. The script remains accessible after deployment and fails to sanitize input before writing to the application’s config.php file. An unauthenticated attacker can inject arbitrary PHP code into config.php, which is later executed when the file is loaded. This allows attackers to achieve remote code execution on the server. Exploitation of this issue will overwrite the existing configuration, rendering the application non-functional. |
| The WordPress plugin is-human <= v1.4.2 contains an eval injection vulnerability in /is-human/engine.php that can be triggered via the 'type' parameter when the 'action' parameter is set to 'log-reset'. The root cause is unsafe use of eval() on user-controlled input, which can lead to execution of attacker-supplied PHP and OS commands. This may result in arbitrary code execution as the webserver user, site compromise, or data exfiltration. The is-human plugin was made defunct in June 2008 and is no longer available for download. This vulnerability was exploited in the wild in March 2012. |
| A vulnerability in Nuvation Battery Management System allows Authentication Bypass.This issue affects Battery Management System: through 2.3.9. |
| A vulnerability has been identified in SIMATIC CP 1542SP-1 (6GK7542-6UX00-0XE0) (All versions < V2.4.24), SIMATIC CP 1542SP-1 IRC (6GK7542-6VX00-0XE0) (All versions < V2.4.24), SIMATIC CP 1543SP-1 (6GK7543-6WX00-0XE0) (All versions < V2.4.24), SIPLUS ET 200SP CP 1542SP-1 IRC TX RAIL (6AG2542-6VX00-4XE0) (All versions < V2.4.24), SIPLUS ET 200SP CP 1543SP-1 ISEC (6AG1543-6WX00-7XE0) (All versions < V2.4.24), SIPLUS ET 200SP CP 1543SP-1 ISEC TX RAIL (6AG2543-6WX00-4XE0) (All versions < V2.4.24). Affected devices do not properly authenticate configuration connections. This could allow an unauthenticated remote attacker to access the configuration data. |
| pwn.college DOJO is an education platform for learning cybersecurity. Prior to commit 467db0b9ea0d9a929dc89b41f6eb59f7cfc68bef, the /workspace endpoint contains an improper authentication vulnerability that allows an attacker to access any active Windows VM without proper authorization. The vulnerability occurs in the view_desktop function where the user is retrieved via a URL parameter without verifying that the requester has administrative privileges. An attacker can supply any user ID and arbitrary password in the request parameters to impersonate another user. When requesting a Windows desktop service, the function does not validate the supplied password before generating access credentials, allowing the attacker to obtain an iframe source URL that grants full access to the target user's Windows VM. This impacts all users with active Windows VMs, as an attacker can access and modify data on the Windows machine and in the home directory of the associated Linux machine via the Z: drive. This issue has been patched in commit 467db0b9ea0d9a929dc89b41f6eb59f7cfc68bef. No known workarounds exist. |
| The issue stems from a missing validation of the pip field in a POST request sent to the /customnode/install endpoint used to install custom nodes which is added to the server by the extension. This allows an attacker to craft a request that triggers a pip install on a user controlled package or URL, resulting in remote code execution (RCE) on the server. |
| Improper Link Resolution Before File Access in the AWS VPN Client for macOS versions 1.3.2- 5.2.0 allows a local user to execute code with elevated privileges. Insufficient validation checks on the log destination directory during log rotation could allow a non-administrator user to create a symlink from a client log file to a privileged location. On log rotation, this could lead to code execution with root privileges if the user made crafted API calls which injected arbitrary code into the log file. We recommend users upgrade to AWS VPN Client for macOS 5.2.1 or the latest version. |
| Stardust is a platform for streaming isolated desktop containers. With this exploit, inter container communication (ICC) is not disabled. This would allow users within a container to access another containers agent, therefore compromising access.The problem has been patched in any Stardust build past 12/20/24. Users are advised to upgrade. Users may also manually disable ICC if they are unable to upgrade. |
| ReQuest Serious Play F3 Media Server 7.0.3 contains an unauthenticated remote code execution vulnerability that allows attackers to execute arbitrary commands as the web server user. Attackers can upload PHP executable files via the Quick File Uploader page, resulting in remote code execution on the server. |
| The Marathon UI in DC/OS < 1.9.0 allows unauthenticated users to deploy arbitrary Docker containers. Due to improper restriction of volume mount configurations, attackers can deploy a container that mounts the host's root filesystem (/) with read/write privileges. When using a malicious Docker image, the attacker can write to /etc/cron.d/ on the host, achieving arbitrary code execution with root privileges. This impacts any system where the Docker daemon honors Marathon container configurations without policy enforcement. |
| A remote code execution vulnerability exists within osCommerce Online Merchant version 2.3.4.1 due to insecure default configuration and missing authentication in the installer workflow. By default, the /install/ directory remains accessible after installation. An unauthenticated attacker can invoke install_4.php, submit crafted POST data, and inject arbitrary PHP code into the configure.php file. When the application later includes this file, the injected payload is executed, resulting in full server-side compromise. |
| SQL injection vulnerability in Infoticketing. This vulnerability allows
an unauthenticated attacker to retrieve, create, update, and delete the
database by sending a POST request using the 'code' parameter in '/components/cart/cartApplyDiscount.php'. |
