| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
can: esd_usb: esd_usb_read_bulk_callback(): fix URB memory leak
Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb:
gs_usb_receive_bulk_callback(): fix URB memory leak").
In esd_usb_open(), the URBs for USB-in transfers are allocated, added to
the dev->rx_submitted anchor and submitted. In the complete callback
esd_usb_read_bulk_callback(), the URBs are processed and resubmitted. In
esd_usb_close() the URBs are freed by calling
usb_kill_anchored_urbs(&dev->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in esd_usb_close().
Fix the memory leak by anchoring the URB in the
esd_usb_read_bulk_callback() to the dev->rx_submitted anchor. |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: fix a race in packet_set_ring() and packet_notifier()
When packet_set_ring() releases po->bind_lock, another thread can
run packet_notifier() and process an NETDEV_UP event.
This race and the fix are both similar to that of commit 15fe076edea7
("net/packet: fix a race in packet_bind() and packet_notifier()").
There too the packet_notifier NETDEV_UP event managed to run while a
po->bind_lock critical section had to be temporarily released. And
the fix was similarly to temporarily set po->num to zero to keep
the socket unhooked until the lock is retaken.
The po->bind_lock in packet_set_ring and packet_notifier precede the
introduction of git history. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: Avoid creating sub-groups asynchronously
The asynchronous creation of sub-groups by a delayed work could lead to a
NULL pointer dereference when the driver directory is removed before the
work completes.
The crash can be easily reproduced with the following commands:
# cd /sys/kernel/config/pci_ep/functions/pci_epf_test
# for i in {1..20}; do mkdir test && rmdir test; done
BUG: kernel NULL pointer dereference, address: 0000000000000088
...
Call Trace:
configfs_register_group+0x3d/0x190
pci_epf_cfs_work+0x41/0x110
process_one_work+0x18f/0x350
worker_thread+0x25a/0x3a0
Fix this issue by using configfs_add_default_group() API which does not
have the deadlock problem as configfs_register_group() and does not require
the delayed work handler.
[mani: slightly reworded the description and added stable list] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtl8xxxu: fix slab-out-of-bounds in rtl8xxxu_sta_add
The driver does not set hw->sta_data_size, which causes mac80211 to
allocate insufficient space for driver private station data in
__sta_info_alloc(). When rtl8xxxu_sta_add() accesses members of
struct rtl8xxxu_sta_info through sta->drv_priv, this results in a
slab-out-of-bounds write.
KASAN report on RISC-V (VisionFive 2) with RTL8192EU adapter:
BUG: KASAN: slab-out-of-bounds in rtl8xxxu_sta_add+0x31c/0x346
Write of size 8 at addr ffffffd6d3e9ae88 by task kworker/u16:0/12
Set hw->sta_data_size to sizeof(struct rtl8xxxu_sta_info) during
probe, similar to how hw->vif_data_size is configured. This ensures
mac80211 allocates sufficient space for the driver's per-station
private data.
Tested on StarFive VisionFive 2 v1.2A board. |
| In the Linux kernel, the following vulnerability has been resolved:
can: usb_8dev: usb_8dev_read_bulk_callback(): fix URB memory leak
Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb:
gs_usb_receive_bulk_callback(): fix URB memory leak").
In usb_8dev_open() -> usb_8dev_start(), the URBs for USB-in transfers are
allocated, added to the priv->rx_submitted anchor and submitted. In the
complete callback usb_8dev_read_bulk_callback(), the URBs are processed and
resubmitted. In usb_8dev_close() -> unlink_all_urbs() the URBs are freed by
calling usb_kill_anchored_urbs(&priv->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in usb_kill_anchored_urbs().
Fix the memory leak by anchoring the URB in the
usb_8dev_read_bulk_callback() to the priv->rx_submitted anchor. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix refcount leak in parse_durable_handle_context()
When the command is a replay operation and -ENOEXEC is returned,
the refcount of ksmbd_file must be released. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix refcount leak in smb2_open()
When ksmbd_vfs_getattr() fails, the reference count of ksmbd_file
must be released. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: fix memory leak in acp3x pdm dma ops |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix memory leak in smb2_open_file()
Reproducer:
1. server: directories are exported read-only
2. client: mount -t cifs //${server_ip}/export /mnt
3. client: dd if=/dev/zero of=/mnt/file bs=512 count=1000 oflag=direct
4. client: umount /mnt
5. client: sleep 1
6. client: modprobe -r cifs
The error message is as follows:
=============================================================================
BUG cifs_small_rq (Not tainted): Objects remaining on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Object 0x00000000d47521be @offset=14336
...
WARNING: mm/slub.c:1251 at __kmem_cache_shutdown+0x34e/0x440, CPU#0: modprobe/1577
...
Call Trace:
<TASK>
kmem_cache_destroy+0x94/0x190
cifs_destroy_request_bufs+0x3e/0x50 [cifs]
cleanup_module+0x4e/0x540 [cifs]
__se_sys_delete_module+0x278/0x400
__x64_sys_delete_module+0x5f/0x70
x64_sys_call+0x2299/0x2ff0
do_syscall_64+0x89/0x350
entry_SYSCALL_64_after_hwframe+0x76/0x7e
...
kmem_cache_destroy cifs_small_rq: Slab cache still has objects when called from cifs_destroy_request_bufs+0x3e/0x50 [cifs]
WARNING: mm/slab_common.c:532 at kmem_cache_destroy+0x16b/0x190, CPU#0: modprobe/1577 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Delay module unload while fabric scan in progress
System crash seen during load/unload test in a loop.
[105954.384919] RBP: ffff914589838dc0 R08: 0000000000000000 R09: 0000000000000086
[105954.384920] R10: 000000000000000f R11: ffffa31240904be5 R12: ffff914605f868e0
[105954.384921] R13: ffff914605f86910 R14: 0000000000008010 R15: 00000000ddb7c000
[105954.384923] FS: 0000000000000000(0000) GS:ffff9163fec40000(0000) knlGS:0000000000000000
[105954.384925] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[105954.384926] CR2: 000055d31ce1d6a0 CR3: 0000000119f5e001 CR4: 0000000000770ee0
[105954.384928] PKRU: 55555554
[105954.384929] Call Trace:
[105954.384931] <IRQ>
[105954.384934] qla24xx_sp_unmap+0x1f3/0x2a0 [qla2xxx]
[105954.384962] ? qla_async_scan_sp_done+0x114/0x1f0 [qla2xxx]
[105954.384980] ? qla24xx_els_ct_entry+0x4de/0x760 [qla2xxx]
[105954.384999] ? __wake_up_common+0x80/0x190
[105954.385004] ? qla24xx_process_response_queue+0xc2/0xaa0 [qla2xxx]
[105954.385023] ? qla24xx_msix_rsp_q+0x44/0xb0 [qla2xxx]
[105954.385040] ? __handle_irq_event_percpu+0x3d/0x190
[105954.385044] ? handle_irq_event+0x58/0xb0
[105954.385046] ? handle_edge_irq+0x93/0x240
[105954.385050] ? __common_interrupt+0x41/0xa0
[105954.385055] ? common_interrupt+0x3e/0xa0
[105954.385060] ? asm_common_interrupt+0x22/0x40
The root cause of this was that there was a free (dma_free_attrs) in the
interrupt context. There was a device discovery/fabric scan in
progress. A module unload was issued which set the UNLOADING flag. As
part of the discovery, after receiving an interrupt a work queue was
scheduled (which involved a work to be queued). Since the UNLOADING
flag is set, the work item was not allocated and the mapped memory had
to be freed. The free occurred in interrupt context leading to system
crash. Delay the driver unload until the fabric scan is complete to
avoid the crash. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: fix NULL pointer dereferences in nvmet_tcp_build_pdu_iovec
Commit efa56305908b ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length")
added ttag bounds checking and data_offset
validation in nvmet_tcp_handle_h2c_data_pdu(), but it did not validate
whether the command's data structures (cmd->req.sg and cmd->iov) have
been properly initialized before processing H2C_DATA PDUs.
The nvmet_tcp_build_pdu_iovec() function dereferences these pointers
without NULL checks. This can be triggered by sending H2C_DATA PDU
immediately after the ICREQ/ICRESP handshake, before
sending a CONNECT command or NVMe write command.
Attack vectors that trigger NULL pointer dereferences:
1. H2C_DATA PDU sent before CONNECT → both pointers NULL
2. H2C_DATA PDU for READ command → cmd->req.sg allocated, cmd->iov NULL
3. H2C_DATA PDU for uninitialized command slot → both pointers NULL
The fix validates both cmd->req.sg and cmd->iov before calling
nvmet_tcp_build_pdu_iovec(). Both checks are required because:
- Uninitialized commands: both NULL
- READ commands: cmd->req.sg allocated, cmd->iov NULL
- WRITE commands: both allocated |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (acpi_power_meter) Fix deadlocks related to acpi_power_meter_notify()
The acpi_power_meter driver's .notify() callback function,
acpi_power_meter_notify(), calls hwmon_device_unregister() under a lock
that is also acquired by callbacks in sysfs attributes of the device
being unregistered which is prone to deadlocks between sysfs access and
device removal.
Address this by moving the hwmon device removal in
acpi_power_meter_notify() outside the lock in question, but notice
that doing it alone is not sufficient because two concurrent
METER_NOTIFY_CONFIG notifications may be attempting to remove the
same device at the same time. To prevent that from happening, add a
new lock serializing the execution of the switch () statement in
acpi_power_meter_notify(). For simplicity, it is a static mutex
which should not be a problem from the performance perspective.
The new lock also allows the hwmon_device_register_with_info()
in acpi_power_meter_notify() to be called outside the inner lock
because it prevents the other notifications handled by that function
from manipulating the "resource" object while the hwmon device based
on it is being registered. The sending of ACPI netlink messages from
acpi_power_meter_notify() is serialized by the new lock too which
generally helps to ensure that the order of handling firmware
notifications is the same as the order of sending netlink messages
related to them.
In addition, notice that hwmon_device_register_with_info() may fail
in which case resource->hwmon_dev will become an error pointer,
so add checks to avoid attempting to unregister the hwmon device
pointer to by it in that case to acpi_power_meter_notify() and
acpi_power_meter_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/nvm: Fix double-free on aux add failure
After a successful auxiliary_device_init(), aux_dev->dev.release
(xe_nvm_release_dev()) is responsible for the kfree(nvm). When
there is failure with auxiliary_device_add(), driver will call
auxiliary_device_uninit(), which call put_device(). So that the
.release callback will be triggered to free the memory associated
with the auxiliary_device.
Move the kfree(nvm) into the auxiliary_device_init() failure path
and remove the err goto path to fix below error.
"
[ 13.232905] ==================================================================
[ 13.232911] BUG: KASAN: double-free in xe_nvm_init+0x751/0xf10 [xe]
[ 13.233112] Free of addr ffff888120635000 by task systemd-udevd/273
[ 13.233120] CPU: 8 UID: 0 PID: 273 Comm: systemd-udevd Not tainted 6.19.0-rc2-lgci-xe-kernel+ #225 PREEMPT(voluntary)
...
[ 13.233125] Call Trace:
[ 13.233126] <TASK>
[ 13.233127] dump_stack_lvl+0x7f/0xc0
[ 13.233132] print_report+0xce/0x610
[ 13.233136] ? kasan_complete_mode_report_info+0x5d/0x1e0
[ 13.233139] ? xe_nvm_init+0x751/0xf10 [xe]
...
"
v2: drop err goto path. (Alexander)
(cherry picked from commit a3187c0c2bbd947ffff97f90d077ac88f9c2a215) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix NULL pointer dereference in amdgpu_gmc_filter_faults_remove
On APUs such as Raven and Renoir (GC 9.1.0, 9.2.2, 9.3.0), the ih1 and
ih2 interrupt ring buffers are not initialized. This is by design, as
these secondary IH rings are only available on discrete GPUs. See
vega10_ih_sw_init() which explicitly skips ih1/ih2 initialization when
AMD_IS_APU is set.
However, amdgpu_gmc_filter_faults_remove() unconditionally uses ih1 to
get the timestamp of the last interrupt entry. When retry faults are
enabled on APUs (noretry=0), this function is called from the SVM page
fault recovery path, resulting in a NULL pointer dereference when
amdgpu_ih_decode_iv_ts_helper() attempts to access ih->ring[].
The crash manifests as:
BUG: kernel NULL pointer dereference, address: 0000000000000004
RIP: 0010:amdgpu_ih_decode_iv_ts_helper+0x22/0x40 [amdgpu]
Call Trace:
amdgpu_gmc_filter_faults_remove+0x60/0x130 [amdgpu]
svm_range_restore_pages+0xae5/0x11c0 [amdgpu]
amdgpu_vm_handle_fault+0xc8/0x340 [amdgpu]
gmc_v9_0_process_interrupt+0x191/0x220 [amdgpu]
amdgpu_irq_dispatch+0xed/0x2c0 [amdgpu]
amdgpu_ih_process+0x84/0x100 [amdgpu]
This issue was exposed by commit 1446226d32a4 ("drm/amdgpu: Remove GC HW
IP 9.3.0 from noretry=1") which changed the default for Renoir APU from
noretry=1 to noretry=0, enabling retry fault handling and thus
exercising the buggy code path.
Fix this by adding a check for ih1.ring_size before attempting to use
it. Also restore the soft_ih support from commit dd299441654f ("drm/amdgpu:
Rework retry fault removal"). This is needed if the hardware doesn't
support secondary HW IH rings.
v2: additional updates (Alex)
(cherry picked from commit 6ce8d536c80aa1f059e82184f0d1994436b1d526) |
| In the Linux kernel, the following vulnerability has been resolved:
rocker: fix memory leak in rocker_world_port_post_fini()
In rocker_world_port_pre_init(), rocker_port->wpriv is allocated with
kzalloc(wops->port_priv_size, GFP_KERNEL). However, in
rocker_world_port_post_fini(), the memory is only freed when
wops->port_post_fini callback is set:
if (!wops->port_post_fini)
return;
wops->port_post_fini(rocker_port);
kfree(rocker_port->wpriv);
Since rocker_ofdpa_ops does not implement port_post_fini callback
(it is NULL), the wpriv memory allocated for each port is never freed
when ports are removed. This leads to a memory leak of
sizeof(struct ofdpa_port) bytes per port on every device removal.
Fix this by always calling kfree(rocker_port->wpriv) regardless of
whether the port_post_fini callback exists. |
| In the Linux kernel, the following vulnerability has been resolved:
sfc: fix deadlock in RSS config read
Since cited commit, core locks the net_device's rss_lock when handling
ethtool -x command, so driver's implementation should not lock it
again. Remove the latter. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Fix NULL pointer dereference in ice_vsi_set_napi_queues
Add NULL pointer checks in ice_vsi_set_napi_queues() to prevent crashes
during resume from suspend when rings[q_idx]->q_vector is NULL.
Tested adaptor:
60:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller E810-XXV for SFP [8086:159b] (rev 02)
Subsystem: Intel Corporation Ethernet Network Adapter E810-XXV-2 [8086:4003]
SR-IOV state: both disabled and enabled can reproduce this issue.
kernel version: v6.18
Reproduce steps:
Boot up and execute suspend like systemctl suspend or rtcwake.
Log:
<1>[ 231.443607] BUG: kernel NULL pointer dereference, address: 0000000000000040
<1>[ 231.444052] #PF: supervisor read access in kernel mode
<1>[ 231.444484] #PF: error_code(0x0000) - not-present page
<6>[ 231.444913] PGD 0 P4D 0
<4>[ 231.445342] Oops: Oops: 0000 [#1] SMP NOPTI
<4>[ 231.446635] RIP: 0010:netif_queue_set_napi+0xa/0x170
<4>[ 231.447067] Code: 31 f6 31 ff c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 85 c9 74 0b <48> 83 79 30 00 0f 84 39 01 00 00 55 41 89 d1 49 89 f8 89 f2 48 89
<4>[ 231.447513] RSP: 0018:ffffcc780fc078c0 EFLAGS: 00010202
<4>[ 231.447961] RAX: ffff8b848ca30400 RBX: ffff8b848caf2028 RCX: 0000000000000010
<4>[ 231.448443] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8b848dbd4000
<4>[ 231.448896] RBP: ffffcc780fc078e8 R08: 0000000000000000 R09: 0000000000000000
<4>[ 231.449345] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
<4>[ 231.449817] R13: ffff8b848dbd4000 R14: ffff8b84833390c8 R15: 0000000000000000
<4>[ 231.450265] FS: 00007c7b29e9d740(0000) GS:ffff8b8c068e2000(0000) knlGS:0000000000000000
<4>[ 231.450715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 231.451179] CR2: 0000000000000040 CR3: 000000030626f004 CR4: 0000000000f72ef0
<4>[ 231.451629] PKRU: 55555554
<4>[ 231.452076] Call Trace:
<4>[ 231.452549] <TASK>
<4>[ 231.452996] ? ice_vsi_set_napi_queues+0x4d/0x110 [ice]
<4>[ 231.453482] ice_resume+0xfd/0x220 [ice]
<4>[ 231.453977] ? __pfx_pci_pm_resume+0x10/0x10
<4>[ 231.454425] pci_pm_resume+0x8c/0x140
<4>[ 231.454872] ? __pfx_pci_pm_resume+0x10/0x10
<4>[ 231.455347] dpm_run_callback+0x5f/0x160
<4>[ 231.455796] ? dpm_wait_for_superior+0x107/0x170
<4>[ 231.456244] device_resume+0x177/0x270
<4>[ 231.456708] dpm_resume+0x209/0x2f0
<4>[ 231.457151] dpm_resume_end+0x15/0x30
<4>[ 231.457596] suspend_devices_and_enter+0x1da/0x2b0
<4>[ 231.458054] enter_state+0x10e/0x570
Add defensive checks for both the ring pointer and its q_vector
before dereferencing, allowing the system to resume successfully even when
q_vectors are unmapped. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: Fix race between rfkill and nci_unregister_device().
syzbot reported the splat below [0] without a repro.
It indicates that struct nci_dev.cmd_wq had been destroyed before
nci_close_device() was called via rfkill.
nci_dev.cmd_wq is only destroyed in nci_unregister_device(), which
(I think) was called from virtual_ncidev_close() when syzbot close()d
an fd of virtual_ncidev.
The problem is that nci_unregister_device() destroys nci_dev.cmd_wq
first and then calls nfc_unregister_device(), which removes the
device from rfkill by rfkill_unregister().
So, the device is still visible via rfkill even after nci_dev.cmd_wq
is destroyed.
Let's unregister the device from rfkill first in nci_unregister_device().
Note that we cannot call nfc_unregister_device() before
nci_close_device() because
1) nfc_unregister_device() calls device_del() which frees
all memory allocated by devm_kzalloc() and linked to
ndev->conn_info_list
2) nci_rx_work() could try to queue nci_conn_info to
ndev->conn_info_list which could be leaked
Thus, nfc_unregister_device() is split into two functions so we
can remove rfkill interfaces only before nci_close_device().
[0]:
DEBUG_LOCKS_WARN_ON(1)
WARNING: kernel/locking/lockdep.c:238 at hlock_class kernel/locking/lockdep.c:238 [inline], CPU#0: syz.0.8675/6349
WARNING: kernel/locking/lockdep.c:238 at check_wait_context kernel/locking/lockdep.c:4854 [inline], CPU#0: syz.0.8675/6349
WARNING: kernel/locking/lockdep.c:238 at __lock_acquire+0x39d/0x2cf0 kernel/locking/lockdep.c:5187, CPU#0: syz.0.8675/6349
Modules linked in:
CPU: 0 UID: 0 PID: 6349 Comm: syz.0.8675 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/13/2026
RIP: 0010:hlock_class kernel/locking/lockdep.c:238 [inline]
RIP: 0010:check_wait_context kernel/locking/lockdep.c:4854 [inline]
RIP: 0010:__lock_acquire+0x3a4/0x2cf0 kernel/locking/lockdep.c:5187
Code: 18 00 4c 8b 74 24 08 75 27 90 e8 17 f2 fc 02 85 c0 74 1c 83 3d 50 e0 4e 0e 00 75 13 48 8d 3d 43 f7 51 0e 48 c7 c6 8b 3a de 8d <67> 48 0f b9 3a 90 31 c0 0f b6 98 c4 00 00 00 41 8b 45 20 25 ff 1f
RSP: 0018:ffffc9000c767680 EFLAGS: 00010046
RAX: 0000000000000001 RBX: 0000000000040000 RCX: 0000000000080000
RDX: ffffc90013080000 RSI: ffffffff8dde3a8b RDI: ffffffff8ff24ca0
RBP: 0000000000000003 R08: ffffffff8fef35a3 R09: 1ffffffff1fde6b4
R10: dffffc0000000000 R11: fffffbfff1fde6b5 R12: 00000000000012a2
R13: ffff888030338ba8 R14: ffff888030338000 R15: ffff888030338b30
FS: 00007fa5995f66c0(0000) GS:ffff8881256f8000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7e72f842d0 CR3: 00000000485a0000 CR4: 00000000003526f0
Call Trace:
<TASK>
lock_acquire+0x106/0x330 kernel/locking/lockdep.c:5868
touch_wq_lockdep_map+0xcb/0x180 kernel/workqueue.c:3940
__flush_workqueue+0x14b/0x14f0 kernel/workqueue.c:3982
nci_close_device+0x302/0x630 net/nfc/nci/core.c:567
nci_dev_down+0x3b/0x50 net/nfc/nci/core.c:639
nfc_dev_down+0x152/0x290 net/nfc/core.c:161
nfc_rfkill_set_block+0x2d/0x100 net/nfc/core.c:179
rfkill_set_block+0x1d2/0x440 net/rfkill/core.c:346
rfkill_fop_write+0x461/0x5a0 net/rfkill/core.c:1301
vfs_write+0x29a/0xb90 fs/read_write.c:684
ksys_write+0x150/0x270 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fa59b39acb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fa5995f6028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fa59b615fa0 RCX: 00007fa59b39acb9
RDX: 0000000000000008 RSI: 0000200000000080 RDI: 0000000000000007
RBP: 00007fa59b408bf7 R08:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
flex_proportions: make fprop_new_period() hardirq safe
Bernd has reported a lockdep splat from flexible proportions code that is
essentially complaining about the following race:
<timer fires>
run_timer_softirq - we are in softirq context
call_timer_fn
writeout_period
fprop_new_period
write_seqcount_begin(&p->sequence);
<hardirq is raised>
...
blk_mq_end_request()
blk_update_request()
ext4_end_bio()
folio_end_writeback()
__wb_writeout_add()
__fprop_add_percpu_max()
if (unlikely(max_frac < FPROP_FRAC_BASE)) {
fprop_fraction_percpu()
seq = read_seqcount_begin(&p->sequence);
- sees odd sequence so loops indefinitely
Note that a deadlock like this is only possible if the bdi has configured
maximum fraction of writeout throughput which is very rare in general but
frequent for example for FUSE bdis. To fix this problem we have to make
sure write section of the sequence counter is irqsafe. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Validate sp before freeing associated memory
System crash with the following signature
[154563.214890] nvme nvme2: NVME-FC{1}: controller connect complete
[154564.169363] qla2xxx [0000:b0:00.1]-3002:2: nvme: Sched: Set ZIO exchange threshold to 3.
[154564.169405] qla2xxx [0000:b0:00.1]-ffffff:2: SET ZIO Activity exchange threshold to 5.
[154565.539974] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed – 0078 0080 0000.
[154565.545744] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed – 0078 00a0 0000.
[154565.545857] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate).
[154565.552760] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate).
[154565.553079] BUG: kernel NULL pointer dereference, address: 00000000000000f8
[154565.553080] #PF: supervisor read access in kernel mode
[154565.553082] #PF: error_code(0x0000) - not-present page
[154565.553084] PGD 80000010488ab067 P4D 80000010488ab067 PUD 104978a067 PMD 0
[154565.553089] Oops: 0000 1 PREEMPT SMP PTI
[154565.553092] CPU: 10 PID: 858 Comm: qla2xxx_2_dpc Kdump: loaded Tainted: G OE ------- --- 5.14.0-503.11.1.el9_5.x86_64 #1
[154565.553096] Hardware name: HPE Synergy 660 Gen10/Synergy 660 Gen10 Compute Module, BIOS I43 09/30/2024
[154565.553097] RIP: 0010:qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx]
[154565.553141] Code: 00 00 e8 58 a3 ec d4 49 89 e9 ba 12 20 00 00 4c 89 e6 49 c7 c0 00 ee a8 c0 48 c7 c1 66 c0 a9 c0 bf 00 80 00 10 e8 15 69 00 00 <4c> 8b 8d f8 00 00 00 4d 85 c9 74 35 49 8b 84 24 00 19 00 00 48 8b
[154565.553143] RSP: 0018:ffffb4dbc8aebdd0 EFLAGS: 00010286
[154565.553145] RAX: 0000000000000000 RBX: ffff8ec2cf0908d0 RCX: 0000000000000002
[154565.553147] RDX: 0000000000000000 RSI: ffffffffc0a9c896 RDI: ffffb4dbc8aebd47
[154565.553148] RBP: 0000000000000000 R08: ffffb4dbc8aebd45 R09: 0000000000ffff0a
[154565.553150] R10: 0000000000000000 R11: 000000000000000f R12: ffff8ec2cf0908d0
[154565.553151] R13: ffff8ec2cf090900 R14: 0000000000000102 R15: ffff8ec2cf084000
[154565.553152] FS: 0000000000000000(0000) GS:ffff8ed27f800000(0000) knlGS:0000000000000000
[154565.553154] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[154565.553155] CR2: 00000000000000f8 CR3: 000000113ae0a005 CR4: 00000000007706f0
[154565.553157] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[154565.553158] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[154565.553159] PKRU: 55555554
[154565.553160] Call Trace:
[154565.553162] <TASK>
[154565.553165] ? show_trace_log_lvl+0x1c4/0x2df
[154565.553172] ? show_trace_log_lvl+0x1c4/0x2df
[154565.553177] ? qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx]
[154565.553215] ? __die_body.cold+0x8/0xd
[154565.553218] ? page_fault_oops+0x134/0x170
[154565.553223] ? snprintf+0x49/0x70
[154565.553229] ? exc_page_fault+0x62/0x150
[154565.553238] ? asm_exc_page_fault+0x22/0x30
Check for sp being non NULL before freeing any associated memory |
