| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3()
During the v3 firmware download the controller sends a v3_data_req with a
32 bit offset and a 16 bit len. nxp_recv_fw_req_v3() checks only the lower
bound of the offset and then sends firmware from that offset.
nxpdev->fw_dnld_v3_offset = offset - nxpdev->fw_v3_offset_correction;
serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data +
nxpdev->fw_dnld_v3_offset, len);
Nothing checks that fw_dnld_v3_offset + len stays within nxpdev->fw->size,
so a controller that asks for an offset or length past the firmware image
makes the driver read past the end of nxpdev->fw->data and send that
memory back over UART.
nxp_recv_fw_req_v1() already bounds the same write. Add the equivalent
check to the v3 path, reject the request when it falls outside the firmware
image, and zero len on the error path so the fw_v3_prev_sent bookkeeping at
free_skb stays consistent. |
| Inappropriate implementation in SiteIsolation in Google Chrome prior to 151.0.7922.72 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpci_rt1711h: unregister TCPCI port with devres
rt1711h_probe() registers the TCPCI port before requesting the interrupt
and enabling alert interrupts. If either of those later steps fails, the
probe function returns without unregistering the TCPCI port. The explicit
unregister currently only happens from the remove callback.
Register a devres action immediately after tcpci_register_port() succeeds,
so tcpci_unregister_port() runs on later probe failures and on driver
detach. Drop the remove callback to avoid unregistering the same port
twice.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: use a u64 stride when cleaning up the offsets array
Allocation's Drop walks the offsets array (binder_size_t = u64 entries),
cleaning up the objects, but it used usize instead of u64 for both the
stride and the per-entry read.
On 64-bit kernels (usize == u64) this is harmless, but on 32-bit kernels
it walks the 8-byte entries in 4-byte steps, iterating an N-entry array
2N times, and reads the always-zero high word as offset 0, cleaning up
the object at offset 0 N extra times. As a result the referenced node or
handle ends up with a lower reference count than it actually has (a
refcount over-decrement), and binder's reference accounting is corrupted;
for example, the owner can be notified of a strong reference release
(BR_RELEASE) even though references still remain.
Change the stride to u64, and read each entry as a u64, narrowing it to
usize with try_into().
On 32-bit ARM, when this over-decrement would drive a count below zero,
the driver's existing refcount guard refuses it and fires:
rust_binder: Failure: refcount underflow! |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: firewire: isight: bound the sample count to the packet payload
isight_packet() takes the frame count from the device iso packet and
checks it only against the device claimed iso length.
count = be32_to_cpu(payload->sample_count);
if (likely(count <= (length - 16) / 4))
isight_samples(isight, payload->samples, count);
length is the iso header data_length. It can be up to 0xffff. So the
gate allows a count up to about 16379. isight_samples() then copies
count frames out of payload->samples into the PCM DMA buffer.
payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The
device multiplexes two samples per frame. A count past
MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer
size writes past runtime->dma_area. The smallest PCM buffer is larger
than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET
keeps both the read and the write in range.
A malicious or faulty Apple iSight on the FireWire bus reaches this
during a normal capture.
Add the MAX_FRAMES_PER_PACKET bound to the gate. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: fix out-of-bounds read in the Traktor Kontrol S4 input parser
snd_usb_caiaq_tks4_dispatch() decodes the Traktor Kontrol S4 input
stream in fixed 16-byte (TKS4_MSGBLOCK_SIZE) message blocks. On every
iteration it advances buf and subtracts the block size while looping on
"while (len)".
len is urb->actual_length. That value is supplied by the device and is
not guaranteed to be a multiple of 16. When a final short block leaves
len between 1 and 15, the loop runs once more, reads up to buf[15], and
then does "len -= TKS4_MSGBLOCK_SIZE". As len is unsigned this underflows
to a huge value. The loop then keeps iterating and walking buf far past
the end of the 512-byte ep4_in_buf, reading out of bounds until a bogus
block id happens to be hit.
Iterate only while a full message block is available. This stops the
unsigned underflow and silently drops any trailing partial block, which
carries no complete control value anyway.
The sibling endpoint-4 parsers are not affected. The Traktor Kontrol X1
and Maschine arms in snd_usb_caiaq_ep4_reply_dispatch() floor
urb->actual_length before dispatching. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: aoa: check snd_ctl_new1() return value
snd_ctl_new1() can return NULL when memory allocation fails. In
layout.c, the function does not check the return value before
dereferencing ctl->id.name or passing to aoa_snd_ctl_add(), which can
lead to a NULL pointer dereference.
Add NULL checks after snd_ctl_new1() calls and return early if any
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: bmc150: clamp the device-reported FIFO frame count
__bmc150_accel_fifo_flush() copies the number of samples the device
reports in its hardware FIFO into an on-stack buffer
u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3];
which is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. The
frame count is read from the FIFO_STATUS register and only masked to its
7 valid bits:
count = val & 0x7F;
so it can be 0..127. The only other limit applied to it is the optional
caller-supplied sample budget:
if (samples && count > samples)
count = samples;
which does not constrain count on the flush-all path (samples == 0), and
leaves it well above 32 whenever samples is larger. count samples are
then transferred into buffer[]:
bmc150_accel_fifo_transfer(data, (u8 *)buffer, count);
bmc150_accel_fifo_transfer() reads count * 6 bytes through regmap, so a
malfunctioning, malicious or counterfeit accelerometer (or an attacker
tampering with the I2C/SPI bus) that reports up to 127 frames writes up
to 762 bytes into the 192-byte buffer: a stack out-of-bounds write of up
to 570 bytes that clobbers the stack canary, saved registers and the
return address.
Clamp count to BMC150_ACCEL_FIFO_LENGTH, the number of samples buffer[]
is sized for, before the transfer, mirroring the watermark clamp already
done in bmc150_accel_set_watermark(). A well-formed flush reports at most
BMC150_ACCEL_FIFO_LENGTH frames, so legitimate devices are unaffected. |
| XMLRPC-C Library versions 1.07 through 1.67.01 are vulnerable to a reflected cross-site scripting (XSS) vulnerability in the error page component. |
| Heap-based Buffer Overflow vulnerability in Apache Thrift C++ bindings.
This issue affects Apache Thrift: before 0.24.0.
Users are recommended to upgrade to version 0.24.0, which fixes the issue. |
| Relative Path Traversal vulnerability in Erlang OTP (stdlib zip module) allows writing files outside the intended extraction directory via a crafted zip archive.
zip:unzip/1,2 and zip:extract/1,2 validate entry paths using zip:check_dir_level/2, which tracks directory depth as a running integer counter: .. decrements it, normal path components increment it. The caller rejects only paths where the final counter value is less than zero. A path such as ../x/y causes the counter to go negative mid-traversal then recover to zero, passing validation while resolving to a location outside the extraction directory when joined with the current working directory via add_cwd.
This vulnerability is associated with program file lib/stdlib/src/zip.erl.
This issue affects OTP from OTP 27.1 before OTP 29.0.4, OTP 28.5.0.4 and OTP 27.3.4.15, corresponding to stdlib from 6.1 before 8.0.3, 7.3.0.1 and 6.2.2.4. |
| A buffer overflow issue was addressed with improved memory handling. This issue is fixed in iOS 26.5 and iPadOS 26.5, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.5, tvOS 26.5, watchOS 26.5. Processing a maliciously crafted image may corrupt process memory. |
| A flaw was found in the cluster-proxy service-proxy component used in Red Hat Advanced Cluster Management for Kubernetes (RHACM) and multicluster-engine (MCE). The service-proxy appends impersonation group headers to proxied requests without first removing caller-supplied values, and the spoke ServiceAccount holds unrestricted impersonation permissions. An authenticated hub principal can inject an Impersonate-Group header to escalate to cluster-admin on every managed cluster. |
| Type Confusion in Dawn in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Critical) |
| Use after free in Chromecast in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Ozone in Google Chrome on Linux prior to 150.0.7871.47 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| Insufficient policy enforcement in FileSystem in Google Chrome prior to 150.0.7871.47 allowed a remote attacker to bypass discretionary access control via a crafted HTML page. (Chromium security severity: Low) |
| ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. Reason: This candidate was issued in error. Notes: All references and descriptions in this candidate have been removed to prevent accidental usage. |
| DriveLock Directory Traversal Information Disclosure Vulnerability. This vulnerability allows remote attackers to disclose sensitive information on affected installations of DriveLock. Authentication is required to exploit this vulnerability.
The specific flaw exists within the web service, which listens on TCP port 4568 by default. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to disclose information in the context of the service account. Was ZDI-CAN-28713. |
