| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Tanium addressed a SQL injection vulnerability in Threat Response. |
| The ShortPixel Image Optimizer – Optimize Images, Convert WebP & AVIF plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 6.5.5 via deserialization of untrusted input . This makes it possible for authenticated attackers, with author-level access and above, to inject a PHP Object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix old_data leak in guest debug error path
__import_wp_info() allocates a per-watchpoint old_data buffer to back up
the original guest memory contents. If a later watchpoint of the same
KVM_SET_GUEST_DEBUG request fails to import, kvm_s390_import_bp_data()
jumps to the error label, which frees the wp_info array but not the
old_data buffers of the entries that were imported successfully. Up to
MAX_BP_COUNT - 1 buffers of up to MAX_WP_SIZE bytes are leaked per failed
request, and the request can be repeated.
Create error handling for cleaning up all created old_data memory
areas. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix memory leak in guest debug handling
bp_data is freed only for the error case by kfree(bp_data).
Every successful KVM_SET_GUEST_DEBUG will leak bp_data. |
| Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the web management interface of Advantech EKI-1242IEIMS in firmware version V1.06.01 that allows a remote authenticated attacker to execute arbitrary OS commands as root via crafted request parameters. |
| Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the web management interface of Advantech EKI-1242IEIMS in firmware version V1.06.01 that allows a remote authenticated attacker to execute arbitrary OS commands as root via crafted request parameters. |
| Nozomi Networks Labs identified a CWE-94: Improper Control of Generation of Code ('Code Injection') vulnerability in the Modbus CSV import workflow of Advantech EKI-1242EIMS in firmware version V1.06.01 that allows a remote authenticated attacker to execute arbitrary Lua code on the device via a crafted imported file. |
| Nozomi Networks Labs identified a CWE-306: Missing Authentication for Critical Function vulnerability in the edgserver management protocol of Advantech EKI-1242EIMS in firmware version V1.06.01 that allows a remote unauthenticated attacker to invoke critical device-management functions, including network reconfiguration, reboot, reset, and firmware upgrade, by sending crafted requests to TCP port 5058. |
| Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the web management interface of Advantech EKI-1242IEIMS in firmware version V1.06.01 that allows a remote authenticated attacker to execute arbitrary OS commands as root via crafted request parameters. |
| The Newsletter WordPress plugin before 9.3.8 does not generate its email tracking signing key with sufficient entropy and signs its tracking links with an unkeyed hash, allowing an unauthenticated attacker who recovers that key offline to forge tracking links, obtain any subscriber's session token, and read and modify that subscriber's stored personal data. |
| The NeuVector JWT verifier accepts noncanonical Base64URL encodings of the same RSA signature field. An attacker holding a valid JWT that has not expired, but was logged out of NeuVector, can continue using the non-expired token with equivalent spelling of the RSA signature field until the token validity expires. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Add timeout while stop_streaming
When stop_streaming is called, an infinite loop may occur in some cases.
Add a bounded poll of the queue status: loop until the queues drain,
sleeping briefly between polls, and bail out once VPU_DEC_STOP_TIMEOUT
elapses. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-async: avoid deleting unlinked ASC entry on link error
v4l2_async_match_notify() creates ancillary media links before adding
asc->asc_subdev_entry to sd->asc_list.
If ancillary link creation fails, the function jumps to
err_call_unbind while asc_subdev_entry has not been linked yet. Async
connections are zero-allocated, so the list entry still has NULL next
and prev pointers on this path. Calling list_del() on it can therefore
dereference NULL instead of returning the original link creation error.
Do not delete asc_subdev_entry from err_call_unbind. There is no list
insertion to undo on this path; the bound callback and sub-device
registration are the operations that need to be rolled back. |
| In the Linux kernel, the following vulnerability has been resolved:
media: ti: vpe: quiesce overflow recovery before freeing streams
The VIP overflow recovery worker is armed from the hardirq handler when a
FIFO overflow is detected, and the list-complete path looks the stream up
through the VPDMA list private pointer. Both keep touching stream, port
and device state; the recovery worker also resets the parser and VPDMA,
repopulates the descriptor list, and re-enables the per-list IRQs.
vip_stop_streaming() masks and clears the per-list IRQs, but it neither
synchronizes the hardirq handler nor disables recovery_work. An overflow
IRQ that has already queued recovery_work, or a list-complete IRQ in
flight when the stream is torn down, can therefore still dereference the
stream after its resources are released: the descriptor list is freed by
vip_release_stream() on file release, and the stream itself by
free_stream() on unbind/remove.
Drain the recovery worker and the IRQ handler at both teardown points
through a shared vip_quiesce_stream() helper, before any stream-owned
resource is released. disable_work_sync() cancels pending recovery_work,
drains a running instance, and raises its disable depth, so a subsequent
schedule_work() issued by a racing IRQ handler is rejected at the
workqueue scheduler: recovery_work cannot be requeued after
disable_work_sync() takes effect. The worker may still re-enable the
per-list IRQs before disable_work_sync() returns; disable_irqs() then
masks those sources and synchronize_irq() waits for any in-flight handler
that still dereferences stream state. In vip_stop_streaming() the helper
runs before the parser is stopped, since a worker drained by
disable_work_sync() may re-enable the parser before exiting and would
otherwise undo the stop. recovery_work is created disabled and enabled in
vip_start_streaming() before IRQs, pairing the enable with the teardown
disable across the streaming lifecycle.
This issue was found by an in-house static analysis tool and confirmed
by manual code review. |
| In the Linux kernel, the following vulnerability has been resolved:
media: tda18250: fix possible integer overflow
Integer overflow may occur, when variable exp equals to zero. Result
of shift 1 << (exp - 1) may then leads to undefined behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
media: saa7164: fix cleanup on resource allocation failure
saa7164_dev_setup() adds the device to the global saa7164_devlist before
requesting the PCI BAR memory regions.
If get_resources() fails, saa7164_dev_setup() decrements the device count
and returns an error, but leaves the device on saa7164_devlist. The probe
error path then frees the device, leaving a dangling entry on the global
list.
Reuse the existing MMIO mapping error path to remove the device from
saa7164_devlist and decrement the device count before returning.
Also release BAR0 if it was successfully requested but the BAR2 request
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
media: s2255: bound JPEG frame size before copying into the buffer
s2255_fillbuff() memcpy()s vc->jpg_size bytes of a captured JPEG/MJPEG
frame into the vb2 plane. vc->jpg_size is taken verbatim from the
S2255_MARKER_FRAME header the device sends (pdword[4] in save_frame())
and, unlike the frame payload length just above it, is never bounded:
payload = le32_to_cpu(pdword[3]);
if (payload > vc->req_image_size) /* payload is checked ... */
return -EINVAL;
vc->pkt_size = payload;
vc->jpg_size = le32_to_cpu(pdword[4]); /* ... jpg_size is not */
A malicious or malfunctioning device can therefore report a jpg_size
larger than the destination vb2 plane, and the memcpy() writes past it.
jpg_size is a signed int, so a value with the top bit set also turns
into a huge length.
Reject a frame whose jpg_size is negative or exceeds the plane size
before copying it. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure
rtl2832_sdr_start_streaming() calls rtl2832_sdr_alloc_stream_bufs(),
rtl2832_sdr_alloc_urbs() and rtl2832_sdr_submit_urbs() in sequence and
shares a single err: label that only unlocks the mutex and returns.
When alloc_urbs() succeeds but submit_urbs() fails, or when alloc_urbs()
itself returns -ENOMEM after alloc_stream_bufs() has already succeeded,
the URBs and/or the coherent DMA stream buffers stay allocated while
streaming reports failure to vb2. Two latent defects follow on the next
VIDIOC_STREAMON:
1) rtl2832_sdr_alloc_stream_bufs() unconditionally resets dev->buf_num
to 0 and overwrites dev->buf_list[]/dev->dma_addr[], permanently
leaking the coherent DMA memory allocated by the previous attempt.
2) rtl2832_sdr_alloc_urbs() never resets dev->urbs_initialized and only
increments it. After a second successful pass urbs_initialized can
exceed MAX_BULK_BUFS, so the subsequent rtl2832_sdr_free_urbs() walks
from urbs_initialized - 1 down to 0 and reads past the end of
dev->urb_list[], passing garbage pointers to usb_free_urb().
Mirror the teardown that stop_streaming() already performs: on the error
path call rtl2832_sdr_free_urbs() and rtl2832_sdr_free_stream_bufs()
before unlocking. Both helpers are idempotent (free_urbs kills and zeros
urbs_initialized; free_stream_bufs is gated on URB_BUF and clears the
buf_num counter), so partial-failure paths and the no-allocation paths
remain safe.
Issue identified by automated review of the INV-003 series at
https://sashiko.dev/ |
| In the Linux kernel, the following vulnerability has been resolved:
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
atlas_buffer_postenable() acquires a runtime PM reference with
pm_runtime_resume_and_get() but returns the result of
atlas_set_interrupt() directly. If atlas_set_interrupt() fails,
the runtime PM reference is leaked and the device can never
autosuspend.
Add pm_runtime_put_autosuspend() on the error path to balance
the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: handle region split failure in apply_min_nr_regions()
damon_apply_min_nr_regions() repeatedly split each region until its size
becomes small enough to meet the user-defined low limit of the number of
regions. The loop assumes the split operation (damon_split_region_at())
will always succeed and create the new region. But the operation could
silently fail for memory allocation failures, for example.
If such failure happens and the region was the last region, the linked
list-based next region fetching returns invalid pointer. As a result,
invalid memory dereference and corruption could happen. Even if the
corner case is handled, it imposes stress to the allocator by trying split
regions for other targets. Fix the issue by breaking all the loops for
any region split failure.
This means there could be a min_nr_regions violation. It will only rarely
happen since the allocation is arguably too small to fail. Even if it
happens, it is only temporal. damon_apply_min_nr_regions() will be called
again after the aggregation interval.
The user impact of the issue should be minor, since the allocation is
arguably too small to fail. But, it could still theoretically happen, and
the consequence is very bad.
This issue was discovered [1] by Sashiko. |
