| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix out-of-bounds memset in command slot handling
The remaining space in a command slot may be smaller than the size of
the command header. Clearing the command header with memset() before
verifying the available slot space can result in an out-of-bounds write
and memory corruption.
Fix this by moving the memset() call after the size validation. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix race in devmap on PREEMPT_RT
On PREEMPT_RT kernels, the per-CPU xdp_dev_bulk_queue (bq) can be
accessed concurrently by multiple preemptible tasks on the same CPU.
The original code assumes bq_enqueue() and __dev_flush() run atomically
with respect to each other on the same CPU, relying on
local_bh_disable() to prevent preemption. However, on PREEMPT_RT,
local_bh_disable() only calls migrate_disable() (when
PREEMPT_RT_NEEDS_BH_LOCK is not set) and does not disable
preemption, which allows CFS scheduling to preempt a task during
bq_xmit_all(), enabling another task on the same CPU to enter
bq_enqueue() and operate on the same per-CPU bq concurrently.
This leads to several races:
1. Double-free / use-after-free on bq->q[]: bq_xmit_all() snapshots
cnt = bq->count, then iterates bq->q[0..cnt-1] to transmit frames.
If preempted after the snapshot, a second task can call bq_enqueue()
-> bq_xmit_all() on the same bq, transmitting (and freeing) the
same frames. When the first task resumes, it operates on stale
pointers in bq->q[], causing use-after-free.
2. bq->count and bq->q[] corruption: concurrent bq_enqueue() modifying
bq->count and bq->q[] while bq_xmit_all() is reading them.
3. dev_rx/xdp_prog teardown race: __dev_flush() clears bq->dev_rx and
bq->xdp_prog after bq_xmit_all(). If preempted between
bq_xmit_all() return and bq->dev_rx = NULL, a preempting
bq_enqueue() sees dev_rx still set (non-NULL), skips adding bq to
the flush_list, and enqueues a frame. When __dev_flush() resumes,
it clears dev_rx and removes bq from the flush_list, orphaning the
newly enqueued frame.
4. __list_del_clearprev() on flush_node: similar to the cpumap race,
both tasks can call __list_del_clearprev() on the same flush_node,
the second dereferences the prev pointer already set to NULL.
The race between task A (__dev_flush -> bq_xmit_all) and task B
(bq_enqueue -> bq_xmit_all) on the same CPU:
Task A (xdp_do_flush) Task B (ndo_xdp_xmit redirect)
---------------------- --------------------------------
__dev_flush(flush_list)
bq_xmit_all(bq)
cnt = bq->count /* e.g. 16 */
/* start iterating bq->q[] */
<-- CFS preempts Task A -->
bq_enqueue(dev, xdpf)
bq->count == DEV_MAP_BULK_SIZE
bq_xmit_all(bq, 0)
cnt = bq->count /* same 16! */
ndo_xdp_xmit(bq->q[])
/* frames freed by driver */
bq->count = 0
<-- Task A resumes -->
ndo_xdp_xmit(bq->q[])
/* use-after-free: frames already freed! */
Fix this by adding a local_lock_t to xdp_dev_bulk_queue and acquiring
it in bq_enqueue() and __dev_flush(). These paths already run under
local_bh_disable(), so use local_lock_nested_bh() which on non-RT is
a pure annotation with no overhead, and on PREEMPT_RT provides a
per-CPU sleeping lock that serializes access to the bq. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix use-after-free in pm8001_queue_command()
Commit e29c47fe8946 ("scsi: pm8001: Simplify pm8001_task_exec()") refactors
pm8001_queue_command(), however it introduces a potential cause of a double
free scenario when it changes the function to return -ENODEV in case of phy
down/device gone state.
In this path, pm8001_queue_command() updates task status and calls
task_done to indicate to upper layer that the task has been handled.
However, this also frees the underlying SAS task. A -ENODEV is then
returned to the caller. When libsas sas_ata_qc_issue() receives this error
value, it assumes the task wasn't handled/queued by LLDD and proceeds to
clean up and free the task again, resulting in a double free.
Since pm8001_queue_command() handles the SAS task in this case, it should
return 0 to the caller indicating that the task has been handled. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Return the correct value in vmw_translate_ptr functions
Before the referenced fixes these functions used a lookup function that
returned a pointer. This was changed to another lookup function that
returned an error code with the pointer becoming an out parameter.
The error path when the lookup failed was not changed to reflect this
change and the code continued to return the PTR_ERR of the now
uninitialized pointer. This could cause the vmw_translate_ptr functions
to return success when they actually failed causing further uninitialized
and OOB accesses. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: cancel rfkill_block work in wiphy_unregister()
There is a use-after-free error in cfg80211_shutdown_all_interfaces found
by syzkaller:
BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220
Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326
CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events cfg80211_rfkill_block_work
Call Trace:
<TASK>
dump_stack_lvl+0x116/0x1f0
print_report+0xcd/0x630
kasan_report+0xe0/0x110
cfg80211_shutdown_all_interfaces+0x213/0x220
cfg80211_rfkill_block_work+0x1e/0x30
process_one_work+0x9cf/0x1b70
worker_thread+0x6c8/0xf10
kthread+0x3c5/0x780
ret_from_fork+0x56d/0x700
ret_from_fork_asm+0x1a/0x30
</TASK>
The problem arises due to the rfkill_block work is not cancelled when wiphy
is being unregistered. In order to fix the issue cancel the corresponding
work in wiphy_unregister().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: avoid qdisc_reset_all_tx_gt() vs dequeue race for lockless qdiscs
When shrinking the number of real tx queues,
netif_set_real_num_tx_queues() calls qdisc_reset_all_tx_gt() to flush
qdiscs for queues which will no longer be used.
qdisc_reset_all_tx_gt() currently serializes qdisc_reset() with
qdisc_lock(). However, for lockless qdiscs, the dequeue path is
serialized by qdisc_run_begin/end() using qdisc->seqlock instead, so
qdisc_reset() can run concurrently with __qdisc_run() and free skbs
while they are still being dequeued, leading to UAF.
This can easily be reproduced on e.g. virtio-net by imposing heavy
traffic while frequently changing the number of queue pairs:
iperf3 -ub0 -c $peer -t 0 &
while :; do
ethtool -L eth0 combined 1
ethtool -L eth0 combined 2
done
With KASAN enabled, this leads to reports like:
BUG: KASAN: slab-use-after-free in __qdisc_run+0x133f/0x1760
...
Call Trace:
<TASK>
...
__qdisc_run+0x133f/0x1760
__dev_queue_xmit+0x248f/0x3550
ip_finish_output2+0xa42/0x2110
ip_output+0x1a7/0x410
ip_send_skb+0x2e6/0x480
udp_send_skb+0xb0a/0x1590
udp_sendmsg+0x13c9/0x1fc0
...
</TASK>
Allocated by task 1270 on cpu 5 at 44.558414s:
...
alloc_skb_with_frags+0x84/0x7c0
sock_alloc_send_pskb+0x69a/0x830
__ip_append_data+0x1b86/0x48c0
ip_make_skb+0x1e8/0x2b0
udp_sendmsg+0x13a6/0x1fc0
...
Freed by task 1306 on cpu 3 at 44.558445s:
...
kmem_cache_free+0x117/0x5e0
pfifo_fast_reset+0x14d/0x580
qdisc_reset+0x9e/0x5f0
netif_set_real_num_tx_queues+0x303/0x840
virtnet_set_channels+0x1bf/0x260 [virtio_net]
ethnl_set_channels+0x684/0xae0
ethnl_default_set_doit+0x31a/0x890
...
Serialize qdisc_reset_all_tx_gt() against the lockless dequeue path by
taking qdisc->seqlock for TCQ_F_NOLOCK qdiscs, matching the
serialization model already used by dev_reset_queue().
Additionally clear QDISC_STATE_NON_EMPTY after reset so the qdisc state
reflects an empty queue, avoiding needless re-scheduling. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/queue: Call fini on exec queue creation fail
Every call to queue init should have a corresponding fini call.
Skipping this would mean skipping removal of the queue from GuC list
(which is part of guc_id allocation). A damaged queue stored in
exec_queue_lookup list would lead to invalid memory reference,
sooner or later.
Call fini to free guc_id. This must be done before any internal
LRCs are freed.
Since the finalization with this extra call became very similar to
__xe_exec_queue_fini(), reuse that. To make this reuse possible,
alter xe_lrc_put() so it can survive NULL parameters, like other
similar functions.
v2: Reuse _xe_exec_queue_fini(). Make xe_lrc_put() aware of NULLs.
(cherry picked from commit 393e5fea6f7d7054abc2c3d97a4cfe8306cd6079) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo: split gc into unlink and reclaim phase
Yiming Qian reports Use-after-free in the pipapo set type:
Under a large number of expired elements, commit-time GC can run for a very
long time in a non-preemptible context, triggering soft lockup warnings and
RCU stall reports (local denial of service).
We must split GC in an unlink and a reclaim phase.
We cannot queue elements for freeing until pointers have been swapped.
Expired elements are still exposed to both the packet path and userspace
dumpers via the live copy of the data structure.
call_rcu() does not protect us: dump operations or element lookups starting
after call_rcu has fired can still observe the free'd element, unless the
commit phase has made enough progress to swap the clone and live pointers
before any new reader has picked up the old version.
This a similar approach as done recently for the rbtree backend in commit
35f83a75529a ("netfilter: nft_set_rbtree: don't gc elements on insert"). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Compare MACs in constant time
To prevent timing attacks, MAC comparisons need to be constant-time.
Replace the memcmp() with the correct function, crypto_memneq(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: rawsock: cancel tx_work before socket teardown
In rawsock_release(), cancel any pending tx_work and purge the write
queue before orphaning the socket. rawsock_tx_work runs on the system
workqueue and calls nfc_data_exchange which dereferences the NCI
device. Without synchronization, tx_work can race with socket and
device teardown when a process is killed (e.g. by SIGKILL), leading
to use-after-free or leaked references.
Set SEND_SHUTDOWN first so that if tx_work is already running it will
see the flag and skip transmitting, then use cancel_work_sync to wait
for any in-progress execution to finish, and finally purge any
remaining queued skbs. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ife: Fix metalist update behavior
Whenever an ife action replace changes the metalist, instead of
replacing the old data on the metalist, the current ife code is appending
the new metadata. Aside from being innapropriate behavior, this may lead
to an unbounded addition of metadata to the metalist which might cause an
out of bounds error when running the encode op:
[ 138.423369][ C1] ==================================================================
[ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.424906][ C1] Write of size 4 at addr ffff8880077f4ffe by task ife_out_out_bou/255
[ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted 7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full)
[ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 138.425800][ C1] Call Trace:
[ 138.425804][ C1] <IRQ>
[ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122)
[ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
[ 138.425839][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425844][ C1] ? __virt_addr_valid (./arch/x86/include/asm/preempt.h:95 (discriminator 1) ./include/linux/rcupdate.h:975 (discriminator 1) ./include/linux/mmzone.h:2207 (discriminator 1) arch/x86/mm/physaddr.c:54 (discriminator 1))
[ 138.425853][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425859][ C1] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597)
[ 138.425868][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425878][ C1] kasan_check_range (mm/kasan/generic.c:186 (discriminator 1) mm/kasan/generic.c:200 (discriminator 1))
[ 138.425884][ C1] __asan_memset (mm/kasan/shadow.c:84 (discriminator 2))
[ 138.425889][ C1] ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425893][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:171)
[ 138.425898][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425903][ C1] ife_encode_meta_u16 (net/sched/act_ife.c:57)
[ 138.425910][ C1] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114)
[ 138.425916][ C1] ? __asan_memcpy (mm/kasan/shadow.c:105 (discriminator 3))
[ 138.425921][ C1] ? __pfx_ife_encode_meta_u16 (net/sched/act_ife.c:45)
[ 138.425927][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425931][ C1] tcf_ife_act (net/sched/act_ife.c:847 net/sched/act_ife.c:879)
To solve this issue, fix the replace behavior by adding the metalist to
the ife rcu data structure. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, arm64: Force 8-byte alignment for JIT buffer to prevent atomic tearing
struct bpf_plt contains a u64 target field. Currently, the BPF JIT
allocator requests an alignment of 4 bytes (sizeof(u32)) for the JIT
buffer.
Because the base address of the JIT buffer can be 4-byte aligned (e.g.,
ending in 0x4 or 0xc), the relative padding logic in build_plt() fails
to ensure that target lands on an 8-byte boundary.
This leads to two issues:
1. UBSAN reports misaligned-access warnings when dereferencing the
structure.
2. More critically, target is updated concurrently via WRITE_ONCE() in
bpf_arch_text_poke() while the JIT'd code executes ldr. On arm64,
64-bit loads/stores are only guaranteed to be single-copy atomic if
they are 64-bit aligned. A misaligned target risks a torn read,
causing the JIT to jump to a corrupted address.
Fix this by increasing the allocation alignment requirement to 8 bytes
(sizeof(u64)) in bpf_jit_binary_pack_alloc(). This anchors the base of
the JIT buffer to an 8-byte boundary, allowing the relative padding math
in build_plt() to correctly align the target field. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_CT: drop pending enqueued packets on template removal
Templates refer to objects that can go away while packets are sitting in
nfqueue refer to:
- helper, this can be an issue on module removal.
- timeout policy, nfnetlink_cttimeout might remove it.
The use of templates with zone and event cache filter are safe, since
this just copies values.
Flush these enqueued packets in case the template rule gets removed. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: release flowtable after rcu grace period on error
Call synchronize_rcu() after unregistering the hooks from error path,
since a hook that already refers to this flowtable can be already
registered, exposing this flowtable to packet path and nfnetlink_hook
control plane.
This error path is rare, it should only happen by reaching the maximum
number hooks or by failing to set up to hardware offload, just call
synchronize_rcu().
There is a check for already used device hooks by different flowtable
that could result in EEXIST at this late stage. The hook parser can be
updated to perform this check earlier to this error path really becomes
rarely exercised.
Uncovered by KASAN reported as use-after-free from nfnetlink_hook path
when dumping hooks. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: cfm: Fix race condition in peer_mep deletion
When a peer MEP is being deleted, cancel_delayed_work_sync() is called
on ccm_rx_dwork before freeing. However, br_cfm_frame_rx() runs in
softirq context under rcu_read_lock (without RTNL) and can re-schedule
ccm_rx_dwork via ccm_rx_timer_start() between cancel_delayed_work_sync()
returning and kfree_rcu() being called.
The following is a simple race scenario:
cpu0 cpu1
mep_delete_implementation()
cancel_delayed_work_sync(ccm_rx_dwork);
br_cfm_frame_rx()
// peer_mep still in hlist
if (peer_mep->ccm_defect)
ccm_rx_timer_start()
queue_delayed_work(ccm_rx_dwork)
hlist_del_rcu(&peer_mep->head);
kfree_rcu(peer_mep, rcu);
ccm_rx_work_expired()
// on freed peer_mep
To prevent this, cancel_delayed_work_sync() is replaced with
disable_delayed_work_sync() in both peer MEP deletion paths, so
that subsequent queue_delayed_work() calls from br_cfm_frame_rx()
are silently rejected.
The cc_peer_disable() helper retains cancel_delayed_work_sync()
because it is also used for the CC enable/disable toggle path where
the work must remain re-schedulable. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix accepting multiple L2CAP_ECRED_CONN_REQ
Currently the code attempts to accept requests regardless of the
command identifier which may cause multiple requests to be marked
as pending (FLAG_DEFER_SETUP) which can cause more than
L2CAP_ECRED_MAX_CID(5) to be allocated in l2cap_ecred_rsp_defer
causing an overflow.
The spec is quite clear that the same identifier shall not be used on
subsequent requests:
'Within each signaling channel a different Identifier shall be used
for each successive request or indication.'
https://www.bluetooth.com/wp-content/uploads/Files/Specification/HTML/Core-62/out/en/host/logical-link-control-and-adaptation-protocol-specification.html#UUID-32a25a06-4aa4-c6c7-77c5-dcfe3682355d
So this attempts to check if there are any channels pending with the
same identifier and rejects if any are found. |
| A chained attack via SQL Expressions and a Grafana Enterprise plugin can lead to a remote arbitrary code execution impact (RCE). This is enabled by a feature in Grafana (OSS), so all users are always recommended to update to avoid future attack vectors going this path.
Only instances with the sqlExpressions feature toggle enabled are vulnerable.
Only instances in the following version ranges are affected:
- 11.6.0 (inclusive) to 11.6.14 (exclusive): 11.6.14 has the fix. 11.5 and below are not affected.
- 12.0.0 (inclusive) to 12.1.10 (exclusive): 12.1.10 has the fix. 12.0 did not receive an update, as it is end-of-life.
- 12.2.0 (inclusive) to 12.2.8 (exclusive): 12.2.8 has the fix.
- 12.3.0 (inclusive) to 12.3.6 (exclusive): 12.3.6 has the fix.
- 12.4.0 (inclusive) to 12.4.2 (exclusive): 12.4.2 has the fix. 13.0.0 and above also have the fix: no v13 release is affected. |
| MCP Ruby SDK is the official Ruby SDK for Model Context Protocol servers and clients. Prior to version 0.9.2, the Ruby SDK's streamable_http_transport.rb implementation contains a session hijacking vulnerability. An attacker who obtains a valid session ID can completely hijack the victim's Server-Sent Events (SSE) stream and intercept all real-time data. Version 0.9.2 contains a patch. |
| changedetection.io is a free open source web page change detection tool. Prior to 0.54.7, the `jq:` and `jqraw:` include filter expressions allow use of the jq `env` builtin, which reads all process environment variables and stores them as the watch snapshot. An authenticated user (or unauthenticated user when no password is set, the default) can leak sensitive environment variables including `SALTED_PASS`, `PLAYWRIGHT_DRIVER_URL`, `HTTP_PROXY`, and any secrets passed as env vars to the container. Version 0.54.7 patches the issue. |
| Tautulli is a Python based monitoring and tracking tool for Plex Media Server. Prior to version 2.17.0, the /newsletter/image/images API endpoint is vulnerable to path traversal, allowing unauthenticated attackers to read arbitrary files from the application server's filesystem. This issue has been patched in version 2.17.0. |
