| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix snp_filter_reserved_mem_regions() off-by-one
Sashiko notes:
> regarding the bounds check in snp_filter_reserved_mem_regions()
> called via walk_iomem_res_desc(): does the check
> if ((range_list->num_elements * 16 + 8) > PAGE_SIZE)
> allow an off-by-one heap buffer overflow?
>
> If range_list->num_elements is 255, 255 * 16 + 8 = 4088, which is <= 4096.
> Writing range->base (8 bytes) fills 4088-4095, but writing range->page_count
> (4 bytes) would write to 4096-4099, overflowing the kzalloc-allocated
> PAGE_SIZE buffer.
Fix this by accounting for the entry about to be written to, in addition to
the entries that are already allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix HV VHCA stats zero-sized buffer allocation
mlx5e_hv_vhca_stats_create() is called from mlx5e_nic_enable(),
before mlx5e_open(). At that point priv->stats_nch is still zero,
because it is only ever incremented in mlx5e_channel_stats_alloc(),
which is reached only from mlx5e_open_channel().
mlx5e_hv_vhca_stats_buf_size() therefore returns 0, and
kvzalloc(0, GFP_KERNEL) returns ZERO_SIZE_PTR ((void *)16) rather
than NULL. The "if (!buf)" guard does not catch this, and
mlx5e_hv_vhca_stats_create() completes "successfully" with
priv->stats_agent.buf set to ZERO_SIZE_PTR.
Once channels are opened (priv->stats_nch > 0) and the hypervisor
enables stats reporting, mlx5e_hv_vhca_stats_work() recomputes
buf_len using the new non-zero stats_nch and calls
memset(buf, 0, buf_len) on ZERO_SIZE_PTR, faulting at address 0x10.
Allocate the buffer based on priv->max_nch, which is set in
mlx5e_priv_init() and is the upper bound on stats_nch:
- Add a separate helper mlx5e_hv_vhca_stats_buf_max_size() that
returns sizeof(per_ring_stats) * max(max_nch, stats_nch), and
use it for the kvzalloc() in mlx5e_hv_vhca_stats_create().
- Keep mlx5e_hv_vhca_stats_buf_size() (which returns based on
stats_nch) for the worker's active payload size, so the wire
format (block->rings = stats_nch) and the amount of data filled
by mlx5e_hv_vhca_fill_stats() are unchanged.
The max(max_nch, stats_nch) guard handles the rare case where
mlx5e_attach_netdev() recomputes max_nch downward across a
detach/resume cycle while priv->stats_nch persists (mlx5e_detach_netdev
does not call mlx5e_priv_cleanup, so stats_nch is only reset when
the netdev is destroyed). Without the guard, the worker could compute
buf_len from stats_nch and overrun the smaller buffer allocated based
on the reduced max_nch.
Allocating a non-zero buffer also makes the kvzalloc() failure path in
mlx5e_hv_vhca_stats_create() reachable for the first time: it returns
early without (re)creating the agent. Clear
priv->stats_agent.{agent,buf} in mlx5e_hv_vhca_stats_destroy() after
freeing them, so that if a later create() bails out on this path, a
subsequent teardown does not double-free the stale agent/buffer left
from a previous enable/disable cycle.
This mirrors the existing mlx5e pattern of preallocating arrays of
size max_nch (e.g. priv->channel_stats) and lazily populating
entries up to stats_nch on demand. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: reload ip header after head reallocation
__ip_vs_get_out_rt() calls skb_ensure_writable() which may
reallocate skb->head. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject negative const offsets for buffer pointers
The verifier rejects variable offsets for PTR_TO_TP_BUFFER and PTR_TO_BUF
accesses, but it currently accepts a constant negative offset produced by
pointer arithmetic.
Commit 022ac0750883 ("bpf: use reg->var_off instead of reg->off for
pointers") moved constant pointer offsets from reg->off to reg->var_off.
However, __check_buffer_access() continued to check only the instruction
offset. An access with reg->var_off equal to -8 and an instruction offset
of zero therefore passes verification.
For writable raw tracepoints, the access end is also calculated from the
unsigned reg->var_off.value. An eight-byte access starting at -8 wraps
the calculated end to zero, allowing the program to load and attach
without increasing max_tp_access.
After ensuring that reg->var_off is constant, calculate the effective
access start using signed arithmetic and reject it when it is negative.
Use the validated start to calculate the access end for both
PTR_TO_TP_BUFFER and PTR_TO_BUF. |
| A vulnerability was detected in Open Asset Import Library Assimp 17c12da. This affects the function Assimp::MDLImporter::AddBonesToNodeGraph_3DGS_MDL7 of the file code/AssetLib/MDL/MDLLoader.cpp of the component Node Parser. The manipulation of the argument bones_num results in heap-based buffer overflow. The attack can be executed remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix DMA buffer out-of-bounds write when fill_max is set
When a USB audio endpoint requests full packet transfers via the fill_max
descriptor flag, data_ep_set_params() promotes ep->curpacksize to
ep->maxpacksize. However, maxsize is left at the original sample-rate
derived value.
Since u->buffer_size is allocated as maxsize * packets, the resulting
DMA buffer is far too small for the requested transfer length. When the
USB host controller streams up to curpacksize bytes per packet, it writes
past the end of the buffer via DMA, corrupting kernel heap memory.
Update maxsize to curpacksize when fill_max is set so that the allocated
DMA buffer size matches the actual transfer request size.
[ changed to reassign maxsize only when ep->fill_max is set -- tiwai ] |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: core: fix supplied_from allocations
If dts property power-supplies has multiple values, then accessing to
psy->supplied_from[i-1] in __power_supply_populate_supplied_from will
overrun supplied_from array. |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
mpf_ops_parse_header() reads header_size from the bitstream at
MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression
*(buf + header_size - 1) reads one byte before the buffer start.
Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core
guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET.
The only real gap is the zero header_size case, which cannot be
resolved by providing a larger buffer, so return -EINVAL. |
| The LoRaWAN Fragmented Data Block Transport service (subsys/lorawan/services/frag_transport.c) does not validate the fragment counter in a received DATA_FRAGMENT command before forwarding it to the configured decoder. In frag_transport_package_callback() the value frag_counter = hdr->frag_index_n & 0x3FFF is taken directly from the downlink payload and passed to the decoder, which derives an array index and flash offset as frag_counter - 1. DataFragment fragments are 1-indexed, so a frag_counter of 0 underflows that arithmetic.
With the default Semtech/LoRaMAC-node decoder, this reaches FragDecoder.FragNbMissingIndex[fragCounter - 1] = 0; in FragDecoderProcess(), where fragCounter - 1 evaluates to -1 and writes a uint16_t zero out of bounds, just before the array and into the adjacent MatrixM2B recovery-matrix state of the static decoder object (CWE-787). A companion write derives a wild flash offset, but that path is rejected by the flash_area_write() bounds check. The in-tree low-memory decoder (frag_dec()) is not corrupted: its out-of-range bit-array and flash accesses are caught by sys_bitarray_ and flash_area_ bounds checks.
The handler is the registered downlink callback for the fragmentation transport port, reachable whenever an active fragmentation session exists, so the triggering byte is attacker-influenceable LoRaWAN/FUOTA network input. Triggering it requires authenticated downlinks (LoRaWAN MAC session keys or a malicious/compromised network or FUOTA server) and an active fragmentation session. The impact is contained: corruption of decoder state and denial of the firmware-update (FUOTA) session rather than controllable memory corruption or code execution. The fix adds a transport-layer check that rejects frag_counter == 0, closing the defect for both decoder backends. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to a buffer overflow. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to an improper buffer write. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service and potentially obtain sensitive information due to a stack-based buffer overflow. |
| FFmpeg versions from 4.4 up to, but not including, 9.0 contain an out-of-bounds heap write vulnerability in the native GoPro CineForm HD (CFHD) decoder that allows remote attackers to corrupt heap memory by supplying a crafted AVI file during stream probing. The cfhd_decode() function fails to enforce the non-Bayer logical output-width invariant in the transform-type-2 reconstruction path, causing horiz_filter_clip() to write oversized 16-bit sample rows far beyond the allocated output frame buffer, which can be escalated to arbitrary code execution via overwrite of a live cleanup callback pointer. |
| FFmpeg versions from 0.5 up to, but not including, 9.0 contain a signed integer overflow vulnerability in the DVB subtitle parser in libavcodec/dvbsub_parser.c that allows attackers to trigger a heap buffer overflow by supplying a crafted WTV file. The overflow causes the bounds-check guard expression to wrap to INT_MIN, bypassing the PARSE_BUF_SIZE comparison and invoking memcpy() with attacker-controlled data into a heap buffer, resulting in an out-of-bounds heap write and potential memory corruption or code execution. |
| rsync 3.2.5 before 3.5.0 contains a heap out-of-bounds write vulnerability that allows remote unauthenticated attackers to write one attacker-controlled byte past the end of a heap allocation by supplying a crafted files-from entry. Attackers can trigger the vulnerability against a read-only rsync daemon module by providing a files-from entry containing both an interior and trailing backslash, causing the add_implied_include() function to under-count the trailing backslash when sizing the destination buffer. |
| rsync 3.0.0 before 3.5.0 contains an out-of-bounds write vulnerability that allows attackers to corrupt memory by triggering HLINK_BUMP processing on file entries with the FLAG_HLINKED flag set while the hard-link preservation option is inactive. Attackers can exploit the missing F_SUM field in the file_struct layout to access memory past the end of the allocated structure, corrupting adjacent heap or stack data. |
| rsync 3.2.3 before 3.5.0 contains an out-of-bounds write in parse_size_arg() where the return value of snprintf() is used directly as an index into a .bss-segment array without bounds checking. When snprintf truncates the formatted size string, the return value equals the number of characters that would have been written including the truncated portion, and this value may exceed the array length. The subsequent indexed write targets memory outside the intended array bounds, corrupting .bss memory. |
| rsync 3.0.1 before 3.5.0 contains an out-of-bounds write vulnerability in the read_args() function that allows a malicious sender to corrupt adjacent heap memory by sending a crafted argument list. When the argument count causes the argv allocation to be exactly full, the trailing NULL terminator is written one slot beyond the allocation boundary, corrupting adjacent heap memory. |
| Vinchin Backup & Recovery through 9.0.0.86562 contains a heap buffer overflow vulnerability that allows unauthenticated remote attackers to cause process crash or memory corruption by sending a malformed TCP packet with an unchecked body_len field to the agentlink_server service. Attackers can craft a malicious packet that passes an attacker-controlled length directly to recv(), triggering a heap overflow of up to approximately 4 GiB and resulting in process crash or potential memory corruption. |
| Contiki-NG's MQTT client parse_publish_vhdr() in os/net/app-layer/mqtt/mqtt.c sets topic_len_received=1 before checking topic_len against the 64-byte limit, so an over-length topic returns early but leaves the flag set. On the next TCP segment, tcp_input() re-invokes the parser with topic_received==0, and the persisted topic_len_received==1 skips the length-reading block containing the guard, falling through directly to a memcpy() that uses the unvalidated 16-bit topic_len as the copy length. The 65-byte topic[] destination overruns into adjacent struct fields including the payload_chunk pointer, which subsequent MQTT code dereferences, giving a compromised or attacker-controlled broker an arbitrary-pointer-write primitive. Contiki-NG's MQTT implementation has no TLS support so the connection is plaintext. Impact ranges from information disclosure and denial of service to remote code execution on embedded targets without memory protection. |
