| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: ena: PHC: Fix potential use-after-free in get_timestamp
Move the phc->active check and resp pointer assignment to after
acquiring the spinlock. Previously, phc->active was checked without
holding the lock, and resp was cached from ena_dev->phc.virt_addr
before the lock was acquired.
If ena_com_phc_destroy() runs between the lockless active check and
the lock acquisition, it sets active=false, releases the lock, frees
the DMA memory, and sets virt_addr=NULL. The get_timestamp path would
then read a NULL virt_addr and dereference it.
With both the active check and the pointer read under the lock,
destroy cannot free the memory while get_timestamp is using it. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Fix WARN_ON in __iommu_group_set_domain_nofail() due to reset
In __iommu_group_set_domain_internal(), concurrent domain attachments are
rejected when any device in the group is recovering. This is necessary to
fence concurrent attachments to a multi-device group where devices might
share the same RID due to PCI DMA alias quirks, but triggers the WARN_ON in
__iommu_group_set_domain_nofail().
Other IOMMU_SET_DOMAIN_MUST_SUCCEED callers in detach/teardown paths, such
as __iommu_group_set_core_domain and __iommu_release_dma_ownership, should
not be rejected, as the domain would be freed anyway in these nofail paths
while group->domain is still pointing to it. So pci_dev_reset_iommu_done()
could trigger a UAF when re-attaching group->domain.
Honor the IOMMU_SET_DOMAIN_MUST_SUCCEED flag, allowing the callers through
the group->recovery_cnt fence, so as to update the group->domain pointer.
Instead add a gdev->blocked check in the device iteration loop, to prevent
any concurrent per-device detachment. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/dma-buf: fix UAF with retry loop
Retry doesn't work here, since bo will be freed on error, leading to
UAF. However, now that we do the alloc & init before the attach, we can
now combine this as one unit and have the init do the alloc for us. This
should make the retry safe.
Reported by Sashiko.
v2: Fix up the error unwind (CI)
(cherry picked from commit 479669418253e0f27f8cf5db01a731352ea592e7) |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tp_meter: avoid use of uninit sender vars
batadv_tp_recv_ack() and batadv_tp_stop() are only valid for tp_vars in the
BATADV_TP_SENDER role. When called with a BATADV_TP_RECEIVER role, it
proceeds to read sender-only members that were never initialized, leading
to undefined behavior.
This can be triggered when a node that is currently acting as a receiver in
an ongoing tp_meter session receives a malicious ACK packet.
Guard against this by checking tp_vars->role immediately after the
lookup and bailing out if it is not BATADV_TP_SENDER, before any of
those members are accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
ipc: limit next_id allocation to the valid ID range
The checkpoint/restore sysctl path can request the next SysV IPC id
through ids->next_id. ipc_idr_alloc() currently forwards that request to
idr_alloc() with an open-ended upper bound.
If the valid tail of the SysV IPC id space is full, the allocation can
spill beyond ipc_mni. The returned SysV IPC id still uses the normal
index encoding, so later lookup and removal can target the wrong slot.
This leaves the real IDR entry behind and breaks the IDR state for the
object.
The bug is in ipc_idr_alloc() in the checkpoint/restore path.
1. ids->next_id is passed to:
idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...)
2. The zero upper bound makes the allocation effectively open-ended.
Once the valid SysV IPC tail is occupied, idr_alloc() can spill past
ipc_mni and allocate an entry beyond the valid IPC id range.
3. The new object id is still encoded with the narrower SysV IPC index
width:
new->id = (new->seq << ipcmni_seq_shift()) + idx
4. Later removal goes through ipc_rmid(), which uses:
ipcid_to_idx(ipcp->id)
That truncates the real IDR index. An object actually stored at a
high index can then be removed as if it lived at a low in-range
index.
5. For shared memory, shm_destroy() frees the current object anyway, but
the real high IDR slot is left behind as a dangling pointer.
6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry
and dereferences freed memory.
Prevent this by bounding the requested allocation to ipc_mni so the
checkpoint/restore path fails once the valid range is exhausted. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: serialize accept_q access
bt_sock_poll() walks the accept queue without synchronization, while
child teardown can unlink the same socket and drop its last reference.
The unsynchronized accept queue walk has existed since the initial
Bluetooth import.
Protect accept_q with a dedicated lock for queue updates and polling.
Also rework bt_accept_dequeue() to take temporary child references under
the queue lock before dropping it and locking the child socket. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: diag: reject stale associations in dump_one path
The SCTP exact sock_diag lookup can hold a transport reference, block on
lock_sock(sk), and then resume after sctp_association_free() has marked
the association dead and freed its bind address list.
When that happens, inet_assoc_attr_size() and
inet_diag_msg_sctpasoc_fill() can still dereference association state
that is no longer valid for reporting. In particular,
inet_diag_msg_sctpasoc_fill() may read an empty bind-address list as a
real sctp_sockaddr_entry and trigger an out-of-bounds read from
unrelated association memory.
Reject the association after taking the socket lock if it has been
reaped or detached from the endpoint, and report the lookup as stale.
This keeps the exact dump-one path from formatting torn association
state. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL pointer dereference in bpf_sk_storage_clone and diag paths
bpf_selem_unlink_nofail() sets SDATA(selem)->smap to NULL before
removing the selem from the storage hlist. A concurrent RCU reader in
bpf_sk_storage_clone() can observe the selem still on the list with
smap already NULL, causing a NULL pointer dereference.
general protection fault, probably for non-canonical address 0xdffffc000000000a:
KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057]
RIP: 0010:bpf_sk_storage_clone+0x1cd/0xaa0 net/core/bpf_sk_storage.c:174
Call Trace:
<IRQ>
sk_clone+0xfed/0x1980 net/core/sock.c:2591
inet_csk_clone_lock+0x30/0x760 net/ipv4/inet_connection_sock.c:1222
tcp_create_openreq_child+0x35/0x2680 net/ipv4/tcp_minisocks.c:571
tcp_v4_syn_recv_sock+0x123/0xf90 net/ipv4/tcp_ipv4.c:1729
tcp_check_req+0x8e1/0x2580 include/net/tcp.h:855
tcp_v4_rcv+0x1845/0x3b80 net/ipv4/tcp_ipv4.c:2347
Add a NULL check for smap in bpf_sk_storage_clone().
bpf_sk_storage_diag_put_all() has the same issue. Add a NULL check
and pass the validated smap directly to diag_get(), which is refactored
to take smap as a parameter instead of reading it internally.
bpf_sk_storage_diag_put() uses diag->maps[i] which is always valid
under its refcount, so diag->maps[i] is passed directly to diag_get(). |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix write hang in passthrough mode
The invalidate_remove() function has incomplete logic for handling write
hit bios after cache invalidation. It sets up the remapping for the
overwrite_bio but then drops it immediately without submission, causing
write operations to hang.
Fix by adding a new invalidate_committed() continuation that submits
the remapped writes to the cache origin after metadata commit completes,
while using the overwrite_endio hook to ensure proper completion
sequencing. This maintains existing coherency. Also improve error
handling in invalidate_complete() to preserve the original error status
instead of using bio_io_error() unconditionally. |
| Use after free in AdFilter in Google Chrome on Android prior to 149.0.7827.201 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix RCU stall in bpf_fd_array_map_clear()
Add a missing cond_resched() in bpf_fd_array_map_clear() loop.
For PROG_ARRAY maps with many entries this loop calls
prog_array_map_poke_run() per entry which can be expensive, and
without yielding this can cause RCU stalls under load:
rcu: Stack dump where RCU GP kthread last ran:
CPU: 0 UID: 0 PID: 30932 Comm: kworker/0:2 Not tainted 6.14.0-13195-g967e8def1100 #2 PREEMPT(undef)
Workqueue: events prog_array_map_clear_deferred
RIP: 0010:write_comp_data+0x38/0x90 kernel/kcov.c:246
Call Trace:
<TASK>
prog_array_map_poke_run+0x77/0x380 kernel/bpf/arraymap.c:1096
__fd_array_map_delete_elem+0x197/0x310 kernel/bpf/arraymap.c:925
bpf_fd_array_map_clear kernel/bpf/arraymap.c:1000 [inline]
prog_array_map_clear_deferred+0x119/0x1b0 kernel/bpf/arraymap.c:1141
process_one_work+0x898/0x19d0 kernel/workqueue.c:3238
process_scheduled_works kernel/workqueue.c:3319 [inline]
worker_thread+0x770/0x10b0 kernel/workqueue.c:3400
kthread+0x465/0x880 kernel/kthread.c:464
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:153
ret_from_fork_asm+0x19/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: test_run: Fix the null pointer dereference issue in bpf_lwt_xmit_push_encap
The bpf_lwt_xmit_push_encap helper needs to access skb_dst(skb)->dev to
calculate the needed headroom:
err = skb_cow_head(skb,
len + LL_RESERVED_SPACE(skb_dst(skb)->dev));
But skb->_skb_refdst may not be initialized when the skb is set up by
bpf_prog_test_run_skb function. Executing bpf_lwt_push_ip_encap function
in this scenario will trigger null pointer dereference, causing a kernel
crash as Yinhao reported:
[ 105.186365] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 105.186382] #PF: supervisor read access in kernel mode
[ 105.186388] #PF: error_code(0x0000) - not-present page
[ 105.186393] PGD 121d3d067 P4D 121d3d067 PUD 106c83067 PMD 0
[ 105.186404] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 105.186412] CPU: 3 PID: 3250 Comm: poc Kdump: loaded Not tainted 6.19.0-rc5 #1
[ 105.186423] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 105.186427] RIP: 0010:bpf_lwt_push_ip_encap+0x1eb/0x520
[ 105.186443] Code: 0f 84 de 01 00 00 0f b7 4a 04 66 85 c9 0f 85 47 01 00 00 31 c0 5b 5d 41 5c 41 5d 41 5e c3 cc cc cc cc 48 8b 73 58 48 83 e6 fe <48> 8b 36 0f b7 be ec 00 00 00 0f b7 b6 e6 00 00 00 01 fe 83 e6 f0
[ 105.186449] RSP: 0018:ffffbb0e0387bc50 EFLAGS: 00010246
[ 105.186455] RAX: 000000000000004e RBX: ffff94c74e036500 RCX: ffff94c74874da00
[ 105.186460] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff94c74e036500
[ 105.186463] RBP: 0000000000000001 R08: 0000000000000002 R09: 0000000000000000
[ 105.186467] R10: ffffbb0e0387bd50 R11: 0000000000000000 R12: ffffbb0e0387bc98
[ 105.186471] R13: 0000000000000014 R14: 0000000000000000 R15: 0000000000000002
[ 105.186484] FS: 00007f166aa4d680(0000) GS:ffff94c8b7780000(0000) knlGS:0000000000000000
[ 105.186490] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 105.186494] CR2: 0000000000000000 CR3: 000000015eade001 CR4: 0000000000770ee0
[ 105.186499] PKRU: 55555554
[ 105.186502] Call Trace:
[ 105.186507] <TASK>
[ 105.186513] bpf_lwt_xmit_push_encap+0x2b/0x40
[ 105.186522] bpf_prog_a75eaad51e517912+0x41/0x49
[ 105.186536] ? kvm_clock_get_cycles+0x18/0x30
[ 105.186547] ? ktime_get+0x3c/0xa0
[ 105.186554] bpf_test_run+0x195/0x320
[ 105.186563] ? bpf_test_run+0x10f/0x320
[ 105.186579] bpf_prog_test_run_skb+0x2f5/0x4f0
[ 105.186590] __sys_bpf+0x69c/0xa40
[ 105.186603] __x64_sys_bpf+0x1e/0x30
[ 105.186611] do_syscall_64+0x59/0x110
[ 105.186620] entry_SYSCALL_64_after_hwframe+0x76/0xe0
[ 105.186649] RIP: 0033:0x7f166a97455d
Temporarily add the setting of skb->_skb_refdst before bpf_test_run to resolve the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
fwctl: Fix class init ordering to avoid NULL pointer dereference on device removal
CXL is linked before fwctl in drivers/Makefile. Both use `module_init, so
`cxl_pci_driver_init()` runs first. When `cxl_pci_probe()` calls
`fwctl_register()` and then `device_add()`, fwctl_class is not yet
registered because fwctl_init() hasn't run, causing `class_to_subsys()` to
return NULL and skip knode_class initialization.
On device removal, `class_to_subsys()` returns non-NULL, and
`device_del()` calls `klist_del()` on the uninitialized knode, triggering
a NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/display: fix oops in suspend/shutdown without display
The xe driver keeps track of whether to probe display, and whether
display hardware is there, using xe->info.probe_display. It gets set to
false if there's no display after intel_display_device_probe(). However,
the display may also be disabled via fuses, detected at a later time in
intel_display_device_info_runtime_init().
In this case, the xe driver does for_each_intel_crtc() on uninitialized
mode config in xe_display_flush_cleanup_work(), leading to a NULL
pointer dereference, and generally calls display code with display info
cleared.
Check for intel_display_device_present() after
intel_display_device_info_runtime_init(), and reset
xe->info.probe_display as necessary. Also do unset_display_features()
for completeness, although display runtime init has already done
that. This will need to be unified across all cases later.
Move intel_display_device_info_runtime_init() call slightly earlier,
similar to i915, to avoid a bunch of unnecessary setup for no display
cases.
Note #1: The xe driver has no business doing low level display plumbing
like for_each_intel_crtc() to begin with. It all needs to happen in
display code.
Note #2: The actual bug is present already in commit 44e694958b95
("drm/xe/display: Implement display support"), but the oops was likely
introduced later at commit ddf6492e0e50 ("drm/xe/display: Make display
suspend/resume work on discrete").
(cherry picked from commit 7c3eb9f47533220888a67266448185fd0775d4da) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_fib: fix stale stack leak via the OIFNAME register
For NFT_FIB_RESULT_OIFNAME the destination register is declared with
len = IFNAMSIZ (four 32-bit registers), but on the lookup-fail,
RTN_LOCAL and oif-mismatch paths nft_fib{4,6}_eval() only writes one
register via "*dest = 0". The remaining three registers are left as
whatever was on the stack in nft_do_chain()'s struct nft_regs, and a
downstream expression that loads the register span can leak that
uninitialised kernel stack to userspace.
The NFTA_FIB_F_PRESENT existence check has the same shape: it is only
meaningful for NFT_FIB_RESULT_OIF, yet it was accepted for any result type
while the eval stores a single byte via nft_reg_store8(), leaving the rest
of the declared span stale.
Fix both:
- replace the bare "*dest = 0" in the eval with nft_fib_store_result(),
which strscpy_pad()s the whole IFNAMSIZ for OIFNAME (and is already
used on the other early-return path), and
- restrict NFTA_FIB_F_PRESENT to NFT_FIB_RESULT_OIF and declare its
destination as a single u8, so the marked span matches the one byte
the eval writes. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phonet: free phonet_device after RCU grace period
phonet_device_destroy() removes a phonet_device from the per-net device
list with list_del_rcu(), but frees it immediately. RCU readers walking
the same list can still hold a pointer to the object after it has been
removed, leading to a slab-use-after-free.
Use kfree_rcu(), matching the lifetime rule already used by
phonet_address_del() for the same object type. |
| Dell PowerFlex Manager, version(s) prior to 5.1.0.1, contain(s) an Inclusion of Functionality from Untrusted Control Sphere vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure. |
| Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, calling Document#encoding= with an invalid encoding (e.g., a non-string, or a string containing a null byte) raises an exception, but only after freeing the document's current encoding string without replacing it. The document is left referencing freed memory, so the next call to Document#encoding reads invalid memory, which can cause a segfault or leak freed bytes into a Ruby String. Affects the CRuby (libxml2) implementation only; JRuby is not affected. This vulnerability is fixed in 1.19.4. |
| Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri’s CRuby native extension could leave a Ruby wrapper pointing to freed memory when replacing the value of an XML attribute. If Ruby code had already accessed an attribute child node, Nokogiri::XML::Attr#value= could free the underlying native child node while the wrapper remained reachable through the document node cache. A later use of the freed child node or a Ruby GC mark could dereference an invalid pointer, causing an invalid read and a possible segfault. This vulnerability is fixed in 1.19.4. |
| Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, XInclude substitution performed by Nokogiri::XML::Node#do_xinclude replaced each <xi:include> in place, freeing the include node along with its children (such as <xi:fallback> and its descendants) and any namespaces declared on them. If an application had already exposed one of those nodes or namespaces to Ruby, the corresponding Ruby object was left pointing at freed memory. Using the object could result in invalid reads or writes to memory. This vulnerability is fixed in 1.19.4. |
