| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: prevent use of deleted inode
syzbot reported a WARNING in nilfs_rmdir. [1]
Because the inode bitmap is corrupted, an inode with an inode number that
should exist as a ".nilfs" file was reassigned by nilfs_mkdir for "file0",
causing an inode duplication during execution. And this causes an
underflow of i_nlink in rmdir operations.
The inode is used twice by the same task to unmount and remove directories
".nilfs" and "file0", it trigger warning in nilfs_rmdir.
Avoid to this issue, check i_nlink in nilfs_iget(), if it is 0, it means
that this inode has been deleted, and iput is executed to reclaim it.
[1]
WARNING: CPU: 1 PID: 5824 at fs/inode.c:407 drop_nlink+0xc4/0x110 fs/inode.c:407
...
Call Trace:
<TASK>
nilfs_rmdir+0x1b0/0x250 fs/nilfs2/namei.c:342
vfs_rmdir+0x3a3/0x510 fs/namei.c:4394
do_rmdir+0x3b5/0x580 fs/namei.c:4453
__do_sys_rmdir fs/namei.c:4472 [inline]
__se_sys_rmdir fs/namei.c:4470 [inline]
__x64_sys_rmdir+0x47/0x50 fs/namei.c:4470
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
xen/netfront: fix crash when removing device
When removing a netfront device directly after a suspend/resume cycle
it might happen that the queues have not been setup again, causing a
crash during the attempt to stop the queues another time.
Fix that by checking the queues are existing before trying to stop
them.
This is XSA-465 / CVE-2024-53240. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: handle NONHEAD !delta[1] lclusters gracefully
syzbot reported a WARNING in iomap_iter_done:
iomap_fiemap+0x73b/0x9b0 fs/iomap/fiemap.c:80
ioctl_fiemap fs/ioctl.c:220 [inline]
Generally, NONHEAD lclusters won't have delta[1]==0, except for crafted
images and filesystems created by pre-1.0 mkfs versions.
Previously, it would immediately bail out if delta[1]==0, which led to
inadequate decompressed lengths (thus FIEMAP is impacted). Treat it as
delta[1]=1 to work around these legacy mkfs versions.
`lclusterbits > 14` is illegal for compact indexes, error out too. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix the qp flush warnings in req
When the qp is in error state, the status of WQEs in the queue should be
set to error. Or else the following will appear.
[ 920.617269] WARNING: CPU: 1 PID: 21 at drivers/infiniband/sw/rxe/rxe_comp.c:756 rxe_completer+0x989/0xcc0 [rdma_rxe]
[ 920.617744] Modules linked in: rnbd_client(O) rtrs_client(O) rtrs_core(O) rdma_ucm rdma_cm iw_cm ib_cm crc32_generic rdma_rxe ip6_udp_tunnel udp_tunnel ib_uverbs ib_core loop brd null_blk ipv6
[ 920.618516] CPU: 1 PID: 21 Comm: ksoftirqd/1 Tainted: G O 6.1.113-storage+ #65
[ 920.618986] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 920.619396] RIP: 0010:rxe_completer+0x989/0xcc0 [rdma_rxe]
[ 920.619658] Code: 0f b6 84 24 3a 02 00 00 41 89 84 24 44 04 00 00 e9 2a f7 ff ff 39 ca bb 03 00 00 00 b8 0e 00 00 00 48 0f 45 d8 e9 15 f7 ff ff <0f> 0b e9 cb f8 ff ff 41 bf f5 ff ff ff e9 08 f8 ff ff 49 8d bc 24
[ 920.620482] RSP: 0018:ffff97b7c00bbc38 EFLAGS: 00010246
[ 920.620817] RAX: 0000000000000000 RBX: 000000000000000c RCX: 0000000000000008
[ 920.621183] RDX: ffff960dc396ebc0 RSI: 0000000000005400 RDI: ffff960dc4e2fbac
[ 920.621548] RBP: 0000000000000000 R08: 0000000000000001 R09: ffffffffac406450
[ 920.621884] R10: ffffffffac4060c0 R11: 0000000000000001 R12: ffff960dc4e2f800
[ 920.622254] R13: ffff960dc4e2f928 R14: ffff97b7c029c580 R15: 0000000000000000
[ 920.622609] FS: 0000000000000000(0000) GS:ffff960ef7d00000(0000) knlGS:0000000000000000
[ 920.622979] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 920.623245] CR2: 00007fa056965e90 CR3: 00000001107f1000 CR4: 00000000000006e0
[ 920.623680] Call Trace:
[ 920.623815] <TASK>
[ 920.623933] ? __warn+0x79/0xc0
[ 920.624116] ? rxe_completer+0x989/0xcc0 [rdma_rxe]
[ 920.624356] ? report_bug+0xfb/0x150
[ 920.624594] ? handle_bug+0x3c/0x60
[ 920.624796] ? exc_invalid_op+0x14/0x70
[ 920.624976] ? asm_exc_invalid_op+0x16/0x20
[ 920.625203] ? rxe_completer+0x989/0xcc0 [rdma_rxe]
[ 920.625474] ? rxe_completer+0x329/0xcc0 [rdma_rxe]
[ 920.625749] rxe_do_task+0x80/0x110 [rdma_rxe]
[ 920.626037] rxe_requester+0x625/0xde0 [rdma_rxe]
[ 920.626310] ? rxe_cq_post+0xe2/0x180 [rdma_rxe]
[ 920.626583] ? do_complete+0x18d/0x220 [rdma_rxe]
[ 920.626812] ? rxe_completer+0x1a3/0xcc0 [rdma_rxe]
[ 920.627050] rxe_do_task+0x80/0x110 [rdma_rxe]
[ 920.627285] tasklet_action_common.constprop.0+0xa4/0x120
[ 920.627522] handle_softirqs+0xc2/0x250
[ 920.627728] ? sort_range+0x20/0x20
[ 920.627942] run_ksoftirqd+0x1f/0x30
[ 920.628158] smpboot_thread_fn+0xc7/0x1b0
[ 920.628334] kthread+0xd6/0x100
[ 920.628504] ? kthread_complete_and_exit+0x20/0x20
[ 920.628709] ret_from_fork+0x1f/0x30
[ 920.628892] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Don't retire aborted MMIO instruction
Returning an abort to the guest for an unsupported MMIO access is a
documented feature of the KVM UAPI. Nevertheless, it's clear that this
plumbing has seen limited testing, since userspace can trivially cause a
WARN in the MMIO return:
WARNING: CPU: 0 PID: 30558 at arch/arm64/include/asm/kvm_emulate.h:536 kvm_handle_mmio_return+0x46c/0x5c4 arch/arm64/include/asm/kvm_emulate.h:536
Call trace:
kvm_handle_mmio_return+0x46c/0x5c4 arch/arm64/include/asm/kvm_emulate.h:536
kvm_arch_vcpu_ioctl_run+0x98/0x15b4 arch/arm64/kvm/arm.c:1133
kvm_vcpu_ioctl+0x75c/0xa78 virt/kvm/kvm_main.c:4487
__do_sys_ioctl fs/ioctl.c:51 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:893
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x1e0/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x38/0x68 arch/arm64/kernel/entry-common.c:712
el0t_64_sync_handler+0x90/0xfc arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598
The splat is complaining that KVM is advancing PC while an exception is
pending, i.e. that KVM is retiring the MMIO instruction despite a
pending synchronous external abort. Womp womp.
Fix the glaring UAPI bug by skipping over all the MMIO emulation in
case there is a pending synchronous exception. Note that while userspace
is capable of pending an asynchronous exception (SError, IRQ, or FIQ),
it is still safe to retire the MMIO instruction in this case as (1) they
are by definition asynchronous, and (2) KVM relies on hardware support
for pending/delivering these exceptions instead of the software state
machine for advancing PC. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtlwifi: Drastically reduce the attempts to read efuse in case of failures
Syzkaller reported a hung task with uevent_show() on stack trace. That
specific issue was addressed by another commit [0], but even with that
fix applied (for example, running v6.12-rc5) we face another type of hung
task that comes from the same reproducer [1]. By investigating that, we
could narrow it to the following path:
(a) Syzkaller emulates a Realtek USB WiFi adapter using raw-gadget and
dummy_hcd infrastructure.
(b) During the probe of rtl8192cu, the driver ends-up performing an efuse
read procedure (which is related to EEPROM load IIUC), and here lies the
issue: the function read_efuse() calls read_efuse_byte() many times, as
loop iterations depending on the efuse size (in our example, 512 in total).
This procedure for reading efuse bytes relies in a loop that performs an
I/O read up to *10k* times in case of failures. We measured the time of
the loop inside read_efuse_byte() alone, and in this reproducer (which
involves the dummy_hcd emulation layer), it takes 15 seconds each. As a
consequence, we have the driver stuck in its probe routine for big time,
exposing a stack trace like below if we attempt to reboot the system, for
example:
task:kworker/0:3 state:D stack:0 pid:662 tgid:662 ppid:2 flags:0x00004000
Workqueue: usb_hub_wq hub_event
Call Trace:
__schedule+0xe22/0xeb6
schedule_timeout+0xe7/0x132
__wait_for_common+0xb5/0x12e
usb_start_wait_urb+0xc5/0x1ef
? usb_alloc_urb+0x95/0xa4
usb_control_msg+0xff/0x184
_usbctrl_vendorreq_sync+0xa0/0x161
_usb_read_sync+0xb3/0xc5
read_efuse_byte+0x13c/0x146
read_efuse+0x351/0x5f0
efuse_read_all_map+0x42/0x52
rtl_efuse_shadow_map_update+0x60/0xef
rtl_get_hwinfo+0x5d/0x1c2
rtl92cu_read_eeprom_info+0x10a/0x8d5
? rtl92c_read_chip_version+0x14f/0x17e
rtl_usb_probe+0x323/0x851
usb_probe_interface+0x278/0x34b
really_probe+0x202/0x4a4
__driver_probe_device+0x166/0x1b2
driver_probe_device+0x2f/0xd8
[...]
We propose hereby to drastically reduce the attempts of doing the I/O
reads in case of failures, restricted to USB devices (given that
they're inherently slower than PCIe ones). By retrying up to 10 times
(instead of 10000), we got reponsiveness in the reproducer, while seems
reasonable to believe that there's no sane USB device implementation in
the field requiring this amount of retries at every I/O read in order
to properly work. Based on that assumption, it'd be good to have it
backported to stable but maybe not since driver implementation (the 10k
number comes from day 0), perhaps up to 6.x series makes sense.
[0] Commit 15fffc6a5624 ("driver core: Fix uevent_show() vs driver detach race")
[1] A note about that: this syzkaller report presents multiple reproducers
that differs by the type of emulated USB device. For this specific case,
check the entry from 2024/08/08 06:23 in the list of crashes; the C repro
is available at https://syzkaller.appspot.com/text?tag=ReproC&x=1521fc83980000. |
| In the Linux kernel, the following vulnerability has been resolved:
ubi: fastmap: Fix duplicate slab cache names while attaching
Since commit 4c39529663b9 ("slab: Warn on duplicate cache names when
DEBUG_VM=y"), the duplicate slab cache names can be detected and a
kernel WARNING is thrown out.
In UBI fast attaching process, alloc_ai() could be invoked twice
with the same slab cache name 'ubi_aeb_slab_cache', which will trigger
following warning messages:
kmem_cache of name 'ubi_aeb_slab_cache' already exists
WARNING: CPU: 0 PID: 7519 at mm/slab_common.c:107
__kmem_cache_create_args+0x100/0x5f0
Modules linked in: ubi(+) nandsim [last unloaded: nandsim]
CPU: 0 UID: 0 PID: 7519 Comm: modprobe Tainted: G 6.12.0-rc2
RIP: 0010:__kmem_cache_create_args+0x100/0x5f0
Call Trace:
__kmem_cache_create_args+0x100/0x5f0
alloc_ai+0x295/0x3f0 [ubi]
ubi_attach+0x3c3/0xcc0 [ubi]
ubi_attach_mtd_dev+0x17cf/0x3fa0 [ubi]
ubi_init+0x3fb/0x800 [ubi]
do_init_module+0x265/0x7d0
__x64_sys_finit_module+0x7a/0xc0
The problem could be easily reproduced by loading UBI device by fastmap
with CONFIG_DEBUG_VM=y.
Fix it by using different slab names for alloc_ai() callers. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: add missing range check in bitmap_ip_uadt
When tb[IPSET_ATTR_IP_TO] is not present but tb[IPSET_ATTR_CIDR] exists,
the values of ip and ip_to are slightly swapped. Therefore, the range check
for ip should be done later, but this part is missing and it seems that the
vulnerability occurs.
So we should add missing range checks and remove unnecessary range checks. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_find()
The per-netns IP tunnel hash table is protected by the RTNL mutex and
ip_tunnel_find() is only called from the control path where the mutex is
taken.
Add a lockdep expression to hlist_for_each_entry_rcu() in
ip_tunnel_find() in order to validate that the mutex is held and to
silence the suspicious RCU usage warning [1].
[1]
WARNING: suspicious RCU usage
6.12.0-rc3-custom-gd95d9a31aceb #139 Not tainted
-----------------------------
net/ipv4/ip_tunnel.c:221 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/362:
#0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60
stack backtrace:
CPU: 12 UID: 0 PID: 362 Comm: ip Not tainted 6.12.0-rc3-custom-gd95d9a31aceb #139
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl+0xba/0x110
lockdep_rcu_suspicious.cold+0x4f/0xd6
ip_tunnel_find+0x435/0x4d0
ip_tunnel_newlink+0x517/0x7a0
ipgre_newlink+0x14c/0x170
__rtnl_newlink+0x1173/0x19c0
rtnl_newlink+0x6c/0xa0
rtnetlink_rcv_msg+0x3cc/0xf60
netlink_rcv_skb+0x171/0x450
netlink_unicast+0x539/0x7f0
netlink_sendmsg+0x8c1/0xd80
____sys_sendmsg+0x8f9/0xc20
___sys_sendmsg+0x197/0x1e0
__sys_sendmsg+0x122/0x1f0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| Squid is an open source caching proxy for the Web supporting HTTP, HTTPS, FTP, and more. Due to Input Validation, Premature Release of Resource During Expected Lifetime, and Missing Release of Resource after Effective Lifetime bugs, Squid is vulnerable to Denial of Service attacks by a trusted server against all clients using the proxy. This bug is fixed in the default build configuration of Squid version 6.10. |
| An issue was discovered in Fort before 1.6.3. A malicious RPKI repository that descends from a (trusted) Trust Anchor can serve (via rsync or RRDP) a signed object containing an empty signedAttributes field. Fort accesses the set's elements without sanitizing it first. Because Fort is an RPKI Relying Party, a crash can lead to Route Origin Validation unavailability, which can lead to compromised routing. |
| An issue was discovered in Fort before 1.6.3. A malicious RPKI repository that descends from a (trusted) Trust Anchor can serve (via rsync or RRDP) an ROA or a Manifest containing a signedAttrs encoded in non-canonical form. This bypasses Fort's BER decoder, reaching a point in the code that panics when faced with data not encoded in DER. Because Fort is an RPKI Relying Party, a panic can lead to Route Origin Validation unavailability, which can lead to compromised routing. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: mtk-cmdq: Move devm_mbox_controller_register() after devm_pm_runtime_enable()
When mtk-cmdq unbinds, a WARN_ON message with condition
pm_runtime_get_sync() < 0 occurs.
According to the call tracei below:
cmdq_mbox_shutdown
mbox_free_channel
mbox_controller_unregister
__devm_mbox_controller_unregister
...
The root cause can be deduced to be calling pm_runtime_get_sync() after
calling pm_runtime_disable() as observed below:
1. CMDQ driver uses devm_mbox_controller_register() in cmdq_probe()
to bind the cmdq device to the mbox_controller, so
devm_mbox_controller_unregister() will automatically unregister
the device bound to the mailbox controller when the device-managed
resource is removed. That means devm_mbox_controller_unregister()
and cmdq_mbox_shoutdown() will be called after cmdq_remove().
2. CMDQ driver also uses devm_pm_runtime_enable() in cmdq_probe() after
devm_mbox_controller_register(), so that devm_pm_runtime_disable()
will be called after cmdq_remove(), but before
devm_mbox_controller_unregister().
To fix this problem, cmdq_probe() needs to move
devm_mbox_controller_register() after devm_pm_runtime_enable() to make
devm_pm_runtime_disable() be called after
devm_mbox_controller_unregister(). |
| Improper Input Validation vulnerability in Apache Traffic Server.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.5.
Users are recommended to upgrade to version 9.2.6, which fixes the issue, or 10.0.2, which does not have the issue. |
| An invalid pointer in the modbus_receive() function of libmodbus v3.1.6 allows attackers to cause a Denial of Service (DoS) via a crafted message sent to the unit-test-server. |
| dcmdata in DCMTK before 3.6.9 has a segmentation fault via an invalid DIMSE message. |
| When asked to both use a `.netrc` file for credentials and to follow HTTP
redirects, curl could leak the password used for the first host to the
followed-to host under certain circumstances.
This flaw only manifests itself if the netrc file has an entry that matches
the redirect target hostname but the entry either omits just the password or
omits both login and password. |
| A vulnerability was discovered in the 389 Directory Server that allows an unauthenticated attacker with network access to the LDAP port to cause a denial of service. The denial of service is triggered by a single message sent over a TCP connection, no bind or other authentication is required. The message triggers a segmentation fault that results in slapd crashing. |
| Vulnerability in the MySQL Client product of Oracle MySQL (component: Client: mysqldump). Supported versions that are affected are 8.0.0-8.0.41, 8.4.0-8.4.4 and 9.0.0-9.2.0. Difficult to exploit vulnerability allows low privileged attacker with network access via multiple protocols to compromise MySQL Client. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all MySQL Client accessible data as well as unauthorized update, insert or delete access to some of MySQL Client accessible data. CVSS 3.1 Base Score 5.9 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:L/A:N). |
| Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: UDF). Supported versions that are affected are 8.0.0-8.0.41, 8.4.0-8.4.4 and 9.0.0-9.2.0. Difficult to exploit vulnerability allows high privileged attacker with logon to the infrastructure where MySQL Server executes to compromise MySQL Server. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server. CVSS 3.1 Base Score 4.0 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:H/UI:R/S:U/C:N/I:N/A:H). |
