| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue in dc2niix before v.1.0.20240202 allows a local attacker to execute arbitrary code via the generated file name is not properly escaped and injected into a system call when certain types of compression are used. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: marvell/octeontx - prevent integer overflows
The "code_length" value comes from the firmware file. If your firmware
is untrusted realistically there is probably very little you can do to
protect yourself. Still we try to limit the damage as much as possible.
Also Smatch marks any data read from the filesystem as untrusted and
prints warnings if it not capped correctly.
The "code_length * 2" can overflow. The round_up(ucode_size, 16) +
sizeof() expression can overflow too. Prevent these overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: smscufx: Fix several use-after-free bugs
Several types of UAFs can occur when physically removing a USB device.
Adds ufx_ops_destroy() function to .fb_destroy of fb_ops, and
in this function, there is kref_put() that finally calls ufx_free().
This fix prevents multiple UAFs. |
| An unauthenticated file download vulnerability exists in LimeSurvey versions from 2.0+ up to and including 2.06+ Build 151014. The application fails to validate serialized input to the admin backup endpoint (`index.php/admin/update/sa/backup`), allowing attackers to specify arbitrary file paths using a crafted `datasupdateinfo` payload. The files are packaged in a ZIP archive and made available for download without authentication. This vulnerability can be exploited to read arbitrary files on the host system, including sensitive OS and configuration files. |
| In the Linux kernel, the following vulnerability has been resolved:
fortify: Fix __compiletime_strlen() under UBSAN_BOUNDS_LOCAL
With CONFIG_FORTIFY=y and CONFIG_UBSAN_LOCAL_BOUNDS=y enabled, we observe
a runtime panic while running Android's Compatibility Test Suite's (CTS)
android.hardware.input.cts.tests. This is stemming from a strlen()
call in hidinput_allocate().
__compiletime_strlen() is implemented in terms of __builtin_object_size(),
then does an array access to check for NUL-termination. A quirk of
__builtin_object_size() is that for strings whose values are runtime
dependent, __builtin_object_size(str, 1 or 0) returns the maximum size
of possible values when those sizes are determinable at compile time.
Example:
static const char *v = "FOO BAR";
static const char *y = "FOO BA";
unsigned long x (int z) {
// Returns 8, which is:
// max(__builtin_object_size(v, 1), __builtin_object_size(y, 1))
return __builtin_object_size(z ? v : y, 1);
}
So when FORTIFY_SOURCE is enabled, the current implementation of
__compiletime_strlen() will try to access beyond the end of y at runtime
using the size of v. Mixed with UBSAN_LOCAL_BOUNDS we get a fault.
hidinput_allocate() has a local C string whose value is control flow
dependent on a switch statement, so __builtin_object_size(str, 1)
evaluates to the maximum string length, making all other cases fault on
the last character check. hidinput_allocate() could be cleaned up to
avoid runtime calls to strlen() since the local variable can only have
literal values, so there's no benefit to trying to fortify the strlen
call site there.
Perform a __builtin_constant_p() check against index 0 earlier in the
macro to filter out the control-flow-dependant case. Add a KUnit test
for checking the expected behavioral characteristics of FORTIFY_SOURCE
internals. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed
When the ops_init() interface is invoked to initialize the net, but
ops->init() fails, data is released. However, the ptr pointer in
net->gen is invalid. In this case, when nfqnl_nf_hook_drop() is invoked
to release the net, invalid address access occurs.
The process is as follows:
setup_net()
ops_init()
data = kzalloc(...) ---> alloc "data"
net_assign_generic() ---> assign "date" to ptr in net->gen
...
ops->init() ---> failed
...
kfree(data); ---> ptr in net->gen is invalid
...
ops_exit_list()
...
nfqnl_nf_hook_drop()
*q = nfnl_queue_pernet(net) ---> q is invalid
The following is the Call Trace information:
BUG: KASAN: use-after-free in nfqnl_nf_hook_drop+0x264/0x280
Read of size 8 at addr ffff88810396b240 by task ip/15855
Call Trace:
<TASK>
dump_stack_lvl+0x8e/0xd1
print_report+0x155/0x454
kasan_report+0xba/0x1f0
nfqnl_nf_hook_drop+0x264/0x280
nf_queue_nf_hook_drop+0x8b/0x1b0
__nf_unregister_net_hook+0x1ae/0x5a0
nf_unregister_net_hooks+0xde/0x130
ops_exit_list+0xb0/0x170
setup_net+0x7ac/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
Allocated by task 15855:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0xa1/0xb0
__kmalloc+0x49/0xb0
ops_init+0xe7/0x410
setup_net+0x5aa/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Freed by task 15855:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x40
____kasan_slab_free+0x155/0x1b0
slab_free_freelist_hook+0x11b/0x220
__kmem_cache_free+0xa4/0x360
ops_init+0xb9/0x410
setup_net+0x5aa/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0 |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: use proper req destructor for IPv6
Before, only the destructor from TCP request sock in IPv4 was called
even if the subflow was IPv6.
It is important to use the right destructor to avoid memory leaks with
some advanced IPv6 features, e.g. when the request socks contain
specific IPv6 options. |
| Certain WithSecure products allow a Denial of Service because the engine scanner can go into an infinite loop when processing an archive file. This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, WithSecure Linux Security 64 12.0, WithSecure Linux Protection 12.0, and WithSecure Atlant 1.0.35-1. |
| In the Bentley ALIM Web application, certain configuration settings can cause exposure of a user's ALIM session token when the user attempts to download files. This is fixed in Assetwise ALIM Web 23.00.04.04 and Assetwise Information Integrity Server 23.00.02.03. |
| File Upload vulnerability in Byzro Network Smart s42 Management Platform v.S42 allows a local attacker to execute arbitrary code via the useratte/userattestation.php component. |
| The Linux distribution underlying the Radiflow iSAP Smart Collector
(CentOS 7 - VSAP 1.20) is obsolete and
reached end of life (EOL) on
June 30, 2024. Thus, any
unmitigated vulnerability could be exploited to affect this product. |
| An unauthenticated user with management network access can get and
modify the Radiflow iSAP Smart Collector (CentOS 7 - VSAP 1.20)
configuration. The device has two web servers that expose unauthenticated REST APIs on the management network (TCP
ports 8084 and 8086). An attacker can use these APIs to get access to all system settings, modify the configuration
and execute some commands (e.g., system reboot). |
| The device has two web servers that expose unauthenticated REST APIs on the management network (TCP
ports 8084 and 8086). Exploiting OS command injection through these APIs, an attacker can send arbitrary
commands that are executed with administrative permissions by the underlying operating system. |
| Connect2id Nimbus JOSE + JWT 10.0.x before 10.0.2 and 9.37.x before 9.37.4 allows a remote attacker to cause a denial of service via a deeply nested JSON object supplied in a JWT claim set, because of uncontrolled recursion. NOTE: this is independent of the Gson 2.11.0 issue because the Connect2id product could have checked the JSON object nesting depth, regardless of what limits (if any) were imposed by Gson. |
| Hard-coded login credentials were found in HPE Networking Instant On Access Points, allowing anyone with knowledge of it to bypass normal device authentication. Successful exploitation could allow a remote attacker to gain administrative access to the system. |
| An RBAC authorization risk in Carina v0.13.0 and earlier allows local attackers to execute arbitrary code through designed commands to obtain the secrets of the entire cluster and further take over the cluster. |
| JumpCloud Remote Assist for Windows versions prior to 0.317.0 include an uninstaller that is invoked by the JumpCloud Windows Agent as NT AUTHORITY\SYSTEM during agent uninstall or update operations. The Remote Assist uninstaller performs privileged create, write, execute, and delete actions on predictable files inside a user-writable %TEMP% subdirectory without validating that the directory is trusted or resetting its ACLs when it already exists. A local, low-privileged attacker can pre-create the directory with weak permissions and leverage mount-point or symbolic-link redirection to (a) coerce arbitrary file writes to protected locations, leading to denial of service (e.g., by overwriting sensitive system files), or (b) win a race to redirect DeleteFileW() to attacker-chosen targets, enabling arbitrary file or folder deletion and local privilege escalation to SYSTEM. This issue is fixed in JumpCloud Remote Assist 0.317.0 and affects Windows systems where Remote Assist is installed and managed through the Agent lifecycle. |
| A Stored Cross-Site Scripting vulnerability was discovered in the Dashboards functionality due to improper validation of an input parameter.
An authenticated low-privilege user can craft a malicious dashboard containing a JavaScript payload and share it with victim users, or a victim can be socially engineered to import a malicious dashboard template. When the victim views or imports the dashboard, the XSS executes in their browser context, allowing the attacker to perform unauthorized actions as the victim, such as modify application data, disrupt application availability, and access limited sensitive information. |
| VMware Tools for Windows contains an improper authorisation vulnerability due to the way it handles user access controls. A malicious actor with non-administrative privileges on a guest VM, who is already authenticated through vCenter or ESX may exploit this issue to access other guest VMs. Successful exploitation requires knowledge of credentials of the targeted VMs and vCenter or ESX. |
| File Manager in Syncfusion Essential Studio for ASP.NET MVC before 27.1.55 has a traversal issue that is related to the request parameter, aka I644734. |
