| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Reserve a terminator byte for the login payload
iscsi_target_check_login_request() rejects a login PDU whose
DataSegmentLength exceeds MAX_KEY_VALUE_PAIRS, but the test is '>' and
login->req_buf is allocated with exactly MAX_KEY_VALUE_PAIRS
bytes. Since iscsit_get_login_rx() receives payload_length + padding
bytes, where
padding = ((-payload_length) & 3);
any payload_length from 8189 to 8192 fills the whole 8192 byte
buffer. The write stays in bounds, but no byte is left for a NUL
terminator.
The buffer is subsequently consumed as a C string. In the CHAP path
chap_check_algorithm() calls kstrdup(a_str), and extract_param() calls
strstr(in_buf, pattern) followed by strlen_semi(), none of which take a
length. convert_null_to_semi() additionally rewrites every embedded NUL
to ';', so even a payload made of well formed NUL separated key=value
records is left without a terminator. These walk past the end of the
object into adjacent slab memory. It is reachable by an unauthenticated
initiator against a portal configured for CHAP; when authentication is
not required iscsi_login_zero_tsih_s2() rewrites AuthMethod to None and
the CHAP path is never entered.
Allocate one extra byte. kzalloc() zeroes it and nothing ever writes to
it, as every writer copies to offset 0 for at most MAX_KEY_VALUE_PAIRS
bytes, so the buffer is always terminated. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: Fix DMA mapping ownership on partial map failure
If RX mapping fails after TX mapping succeeds, __spi_map_msg() unmaps
TX but leaves tx_sg_mapped set. If TX mapping fails on a later
transfer, mappings created for earlier transfers remain active.
In both cases, cur_{tx,rx}_dma_dev have not yet been updated because they
are assigned only after every transfer has been mapped. The subsequent
spi_unmap_msg() may therefore unmap the TX mapping again or release
earlier mappings using a NULL or stale device. Using a NULL device can
trigger an oops. An empty SG table does not prevent the NULL dereference
because dma_unmap_sg_attrs() accesses the device before checking the
entry count.
Publish both mapping devices before mapping starts and unwind all
failures through __spi_unmap_msg(). This clears the mapping flags and
releases each mapping once with the device that created it.
Publishing the devices before the loop also refreshes them when no
transfer needs mapping. No mapping flag is set in that case, so current
users do not use the pointers as mapping owners. |
| A flaw was found in the foreman_ansible plugin's Ansible inventory API. The controller builds its host query using an unscoped Host.where call that does not enforce the search filter associated with the caller's view_hosts permission. An authenticated user whose host visibility is restricted by a permission filter can supply arbitrary host IDs within their organization and receive the full Ansible inventory for those hosts, including parameter values marked as hidden. |
| SigNoz versions 0.88.0 through 0.141.0 fail to apply authorization wrappers to trace-funnel analytics endpoints in the HTTP handler. Unauthenticated attackers can submit arbitrary funnel definitions to retrieve trace analytics including identifiers, durations, span counts, service topology, and error activity without credentials. |
| The Location Manager plugin for WordPress is vulnerable to generic SQL Injection via 'latitude' and 'longitude' REST API Parameters in all versions up to, and including, 2.3.38 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The injection is triggered when the orderby=lat_lon parameter is supplied, and affects multiple publicly accessible REST endpoints including geodir/v2/locations/cities, /regions, /countries, and /neighbourhoods via both the get_locations() and get_neighbourhoods() functions. |
| The Qi Addons For Elementor plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 's' parameter in all versions up to, and including, 1.11 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires the Table of Contents widget to be placed on a template that renders on the WordPress search-results page (e.g., a sitewide header or footer template) with the 'Limit ToC to Main Page Content' option left at its default value of No, so the widget scans the search-results heading that reflects the unsanitized `s` parameter. |
| The WP Multi Store Locator Pro plugin for WordPress is vulnerable to generic SQL Injection via the 'store_locatore_search_radius' parameter in all versions up to, and including, 4.5.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The injection occurs in a numeric, unquoted SQL context, meaning WordPress's wp_magic_quotes() addslashes-based protection cannot neutralize the payload, and the AJAX handler is registered on wp_ajax_nopriv_make_search_request with no nonce or capability check, making it fully accessible without authentication. |
| The WP Easy Pay – Payment and Donation form Builder for Square plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 4.5.0. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to permanently delete arbitrary posts, pages, and custom post types (bypassing the trash via force deletion) or change any published post to draft status. |
| The Photo Gallery by 10Web – Mobile-Friendly Image Gallery plugin for WordPress is vulnerable to time-based SQL Injection via 'album_id' Shortcode Attribute in all versions up to, and including, 1.8.44 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with author-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. An Author-level user can store a SQL injection payload inside a published post's shortcode attribute, causing the payload to execute when any visitor renders the post; notably, the unsanitized value appears on both sides of a UNION query, potentially doubling the observable time-based delay. |
| The Store Exporter – Export WooCommerce Products, Orders, Subscriptions, Customers plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 2.8.0 via the 'filename' parameter parameter. This makes it possible for authenticated attackers, with shop manager-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information. |
| The FileBird – WordPress Media Library Folders & File Manager plugin for WordPress is vulnerable to Stored Cross-Site Scripting via image alt text in all versions up to, and including, 6.5.6 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Mapster WP Maps plugin for WordPress is vulnerable to Arbitrary User Meta Write in all versions up to, and including, 1.23.0 via the `my_profile_update()` function. This is due to the function performing no nonce verification, no capability check, and no allowlist validation on the meta key supplied via the `acf-photo-gallery-groups` POST parameter before passing both the meta key and its corresponding value directly to `update_user_meta()`. This makes it possible for authenticated attackers, with Subscriber-level access and above, to update arbitrary user meta values, though privilege escalation is not possible. |
| The Printcart Web to Print Product Designer for WooCommerce plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 2.8.5 via the 'mockups' parameter. This makes it possible for unauthenticated attackers to read the contents of arbitrary files on the server, which can contain sensitive information. A valid nonce is obtainable by unauthenticated users via the companion nbd_check_use_logged_in nopriv AJAX endpoint, which freely mints and returns a nbdesigner-get-data nonce to any visitor; additionally, if the NBDESIGNER_ENABLE_NONCE constant is disabled, even this nonce gate is bypassed entirely. |
| The NEX-Forms – Ultimate Forms Plugin for WordPress plugin for WordPress is vulnerable to generic SQL Injection via the 'additional_params' parameter in all versions up to, and including, 9.3.0 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with custom-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The operator allowlist applied by get_table_records() when building its own WHERE fragment is not enforced on the same tainted additional_params array when it is forwarded to get_total_records(), leaving the SQL sink unprotected. |
| The Strong Testimonials plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'lightbox_class' Shortcode Attribute in all versions up to, and including, 3.3.8 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires that the targeted testimonial view has at least one published testimonial with a featured image and the lightbox wrapper enabled, as the vulnerable code path is only reached when a thumbnail is rendered. |
| The LatePoint – Calendar Booking Plugin for Appointments and Events plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 5.6.3 via the LatePointAbilityDeleteBooking::execute due to missing validation on a user controlled key. This makes it possible for attackers, with LatePoint Agent-level access and above, to read bookings and customer PII (full name, email, phone, and notes) assigned to other LatePoint agents, and delete arbitrary bookings by supplying any booking ID. This vulnerability is only exploitable when an administrator has enabled the Abilities API toggles (latepoint_abilities_api, latepoint_abilities_api_delete, and/or latepoint_abilities_api_edit) in the plugin settings. |
| The WCFM Marketplace – Multivendor Marketplace for WooCommerce plugin for WordPress is vulnerable to generic SQL Injection via the 'wcfmmp_user_location_lng' parameter in all versions up to, and including, 3.8.2 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| The ShopLentor – All-in-One WooCommerce Growth & Store Enhancement Plugin plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via Query-String Parameter Name in all versions up to, and including, 3.5.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. The vulnerability is triggered via the WL: Product Horizontal Filter widget, which reflects attacker-supplied query-string parameter names from the current URL into option element value attributes without escaping, allowing payload breakout from the value="..." attribute context. |
| The VK All in One Expansion Unit plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'vkExUnit_cta_img_position' Post Meta in all versions up to, and including, 9.118.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The sanitize_text_field callback applied on save does not strip double-quote characters or on* event-handler attributes, and the output filter Vk_Call_To_Action::safe_kses_post() only rewrites disallowed iframe elements while returning all other content verbatim, leaving the injected payload intact in the rendered HTML. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: mtdoops: free page bitmap when the backing MTD is removed
mtdoops_notify_add() allocates oops_page_used when the configured MTD
device is registered. mtdoops_notify_remove() detaches from that device
but leaves the bitmap allocated. If the same MTD device is later
registered again, the add path allocates a new bitmap and overwrites the
old pointer, leaking one vmalloc allocation per remove/add cycle.
This is only visible when the backing MTD device can disappear and be
registered again while mtdoops remains loaded, so the usual static MTD
case does not expose it.
Free the bitmap after unregistering the dumper and flushing the pending
workers, then clear the pointer and page count before a later attach can
allocate fresh state. Clearing the pointer also keeps the module exit
path from freeing the same bitmap a second time after a remove event. |
