| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Acquire init_mm read lock on attribute changes to avoid UAF
A previous commit protected against races between ptdump and CPA collapse,
however one still exists between attribute changes and collapse as reported
by Denis V. Lunev (linked).
When an attribute change arises, a lockless page table walker obtains a PTE
entry, which is later written to via set_pte_atomic():
...
-> change_page_attr_set_clr()
-> __change_page_attr_set_clr()
-> __change_page_attr()
-> _lookup_address_cpa()
-> lookup_address_in_pgd_attr()
-> [ lockless page table walker ]
-> set_pte_atomic()
There is nothing preventing a concurrent CPA collapse which can free the
PTE that was retrieved here, resulting in a use-after-free.
With the mmap write lock taken on init_mm over CPA collapse, resolve this
race by acquiring an mmap read lock on init_mm over
__change_page_attr_set_clr().
This locks across the whole operation over which the walk and the PTE
entry write occurs, solving the race.
It is safe to do this here, as no spinlocks are held upon entry to
__change_page_attr_set_clr().
However, the lock must not be held over an allocation, as allocation can
trigger reclaim and shrinkers may call into CPA recursively, making
deadlocks possible (init_mm -> ... -> fs_reclaim -> init_mm).
A page table is allocated when a huge page needs to be split:
-> change_page_attr_set_clr()
-> __change_page_attr_set_clr()
-> __change_page_attr()
-> split_large_page()
[ pagetable_alloc() ]
-> __split_large_page()
Avoid deadlocks by dropping the mmap lock across pagetable_alloc() in
split_large_page() and track whether this is needed by adding a new
'init_mm_read_locked' flag to struct cpa_data.
This is safe as __split_large_page() (called with locks re-established)
revalidates that the page table entry is the same as it was prior to the
locks being dropped and __change_page_attr() repeats the entire page table
walk whenever a split occurs, so concurrent split and collapse are
accounted for.
Concurrent ptdump is also safe as the lock is only dropped over page table
allocation during which time the page table has not yet been modified.
The CPA_COLLAPSE flag is only set by set_memory_rox(), which exclusively
operates upon vmalloc ranges, and on x86 only within the module mapping
space.
This is important, because some callers directly invoke
__change_page_attr_set_clr(), bypassing this lock. However, none of these
operate within the module mapping space.
* cpa_process_alias() - a recursive helper called by
__change_page_attr_set_clr().
* __set_memory_enc_pgtable() - operates on the direct mapping and (via
__vmbus_establish_gpadl()) the vmalloc mapping space.
* __set_pages_[n]p() - called by set_direct_map_[invalid, default,
valid]_noflush(), __kernel_map_pages() - operates on the direct map.
* kernel_[un]map_pages_in_pgd() - operates on EFI ranges.
This work is based upon Denis V. Lunev's excellent analysis of the bug
with gratitude.
[ dhansen: move to imperative voice in changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Null out freed pointers in qla2x00_mem_alloc() error path
When qla2x00_mem_alloc() fails, qla2x00_probe_one() jumps to
probe_hw_failed and calls qla2x00_mem_free(). Several error labels in
qla2x00_mem_alloc() freed adapter members (elsrej.c, purex_dma_pool,
flt, sfp_data, loop_id_map, async_pd, sf_init_cb, ex_init_cb, npiv_info)
but left the pointers dangling. qla2x00_mem_free() then freed them a
second time. Worse, for the dma_pool members it issued
dma_pool_free(ha->s_dma_pool, ...) after s_dma_pool had already been
destroyed and set to NULL at fail_s_dma_pool, dereferencing a NULL pool.
Clear each freed pointer (and its DMA handle) in the error labels so the
subsequent qla2x00_mem_free() skips them. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix soft lockup polling continuation IOCB signature
qla27xx_copy_multiple_pkt() and qla27xx_copy_fpin_pkt() poll
rsp_q->ring_ptr->signature for RESPONSE_PROCESSED (0xDEADDEAD) to decide
whether the next continuation IOCB has arrived, spinning on cpu_relax()
without advancing the ring or decrementing the entry count while it has
not. response_t::signature lives at byte offset 60, but a continuation
IOCB (sts_cont_entry_t / struct sts_cont_entry_ext) carries raw FC frame
payload at that offset (data[56..59]). A received frame whose payload
bytes happen to equal 0xDEADDEAD is therefore misread as "not yet
arrived", and the loop spins forever in interrupt/DPC context, causing a
CPU soft lockup.
The poll is also unnecessary: callers of qla27xx_copy_multiple_pkt()
(PT_LS4_UNSOL and the NVMe purls path) already gate on
qla_chk_cont_iocb_avail(), which guarantees all entry_count IOCBs are
present before copying begins. The sibling helper
__qla_copy_purex_to_buffer() already drops the signature poll and relies
on the entry_type == STATUS_CONT_TYPE guard instead.
Remove the signature busy-wait from both helpers, keeping the entry_type
guard, and gate the FPIN path with qla_chk_cont_iocb_avail() so it defers
and re-processes on the next interrupt once all continuation IOCBs have
arrived, mirroring the ELS_AUTH_ELS and PT_LS4_UNSOL arms. With this the
signature field is never read on a continuation IOCB, eliminating the
payload-aliasing lockup. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[]
The FC BSG transport allocates job->request via memdup_user() using the
exact user-supplied request_len. For FC_BSG_HST_VENDOR,
fc_bsg_host_dispatch() only guarantees request_len covers msgcode and
vendor_id; it does not account for the vendor_cmd[] flexible array.
qla2xxx then reads the command selector vendor_cmd[0] and, in several
sub-handlers, vendor_cmd[1]/[2] or structures overlaid on the vendor
command area without verifying request_len. A caller holding
CAP_SYS_RAWIO can submit a short request whose vendor_id matches the
host, triggering out-of-bounds heap reads (KASAN-detectable, and able to
mis-select a command or panic).
Add a central guard in qla2x00_process_vendor_specific() so the selector
is always in bounds, restrict the early vendor_cmd[0] read in
qla24xx_bsg_request() to sufficiently long vendor messages, and add
request_len checks to the sub-handlers that read further:
qla24xx_proc_fcp_prio_cfg_cmd(), qla2x00_process_loopback(),
qla84xx_reset(), qla84xx_updatefw(), qla2x00_read_optrom(),
qla2x00_update_optrom(), qlafx00_mgmt_cmd() and
qla28xx_validate_flash_image(). |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pai: Support CPU hotplug for PMU PAI
The command 'perf stat -e pai_crypto/CRYPTO_ALL/ -- <command>'
crashes the kernel when CPUs are hotplug added during that run.
Root cause is the missing allocation of per-CPU data structures
for that new CPU. The allocation is dynamic and the first
event that has task context creates such a structure for
each online CPU. This is not sufficient. CPUs may be offline
during event creation and can be set online during the
perf run time. For example commands
# echo 0 > /sys/devices/system/cpu/cpu1/online
# perf stat -e cycles -i -- stress-ng -t10s --matrix X
# sleep 1
# echo 1 > /sys/devices/system/cpu/cpu1/online
Currently without a CPU hotplug handler, that new CPU has no
per-CPU data infrastructure. The scheduler runs PMU call back
function pai_add() to install the PMU support for that CPU before
the task is being scheduled on that new CPU.
In pai_add() instructions
mp = this_cpu_ptr(pai_root[idx].mapptr);
cpump = mp->mapptr;
return a NULL pointer and the result is a kernel panic as variable
cpump is used inside that function.
Add CPU hotplug support for CPU add and delete and create
the necessary per-CPU data infrastructure during CPU hotplug
add processing. Same for CPU hotplug remove.
This is done when the CPU is offline to ensure the data structures
are available when CPU is made online and tasks are scheduled on it.
[hca@linux.ibm.com: fixup error path in pai_init()] |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix bad accounting in __mptcp_subflow_push_pending()
If __subflow_push_pending() errors out we should avoid updating the
copied byte counters, to avoid mismatch push call later on. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in UiCore UiCore Elements uicore-elements allows Stored XSS.This issue affects UiCore Elements: from n/a through 1.3.17. |
| In isPackageNullOrSystem of AppOpsService.java, there is a possible persistent denial of service due to improper input validation. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Premmerce Premmerce Product Search for WooCommerce premmerce-search allows Stored XSS.This issue affects Premmerce Product Search for WooCommerce: from n/a through 2.2.7. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: tree-checker: validate names in ROOT_REF and ROOT_BACKREF
ROOT_REF and ROOT_BACKREF items contain a struct btrfs_root_ref followed
by the subvolume name. Several readers assume that this layout is already
valid and then use the on-disk name length directly. A corrupted item can
therefore make those readers address bytes outside the item, and
BTRFS_IOC_GET_SUBVOL_INFO can copy too many bytes into its fixed-size UAPI
name buffer.
Validate ROOT_REF and ROOT_BACKREF items in tree-checker before any reader
uses them. Reject records that do not contain a non-empty name, whose
name_len does not exactly describe the remaining item payload, or whose
name exceeds BTRFS_NAME_LEN.
For BTRFS_IOC_GET_SUBVOL_INFO, copy only the validated on-disk name_len
instead of deriving the copy length from the item size. The ioctl result is
zeroed when allocated. That leaves the existing trailing zero byte
untouched. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack: use get_unaligned_be32() in tcp_sack()
The timestamp-only fast path dereferences the option stream as
*(__be32 *)ptr, which assumes 4-byte alignment that the TCP option
stream does not guarantee. Use get_unaligned_be32() instead, which
reads the value safely and already returns host byte order, so the
htonl() on the comparison constant can be dropped.
This matches the existing get_unaligned_be32() use later in the same
function. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: validate FDP configuration descriptor sizes
Validate descriptor sizes while walking the FDP configurations log so
dsze == 0 or a descriptor past the log end cannot cause unbounded
iteration or reads past the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: validate index entry key bounds
[BUG]
A malformed NTFS directory index entry can advertise a key_size larger
than the bytes actually present in its NTFS_DE payload. Directory lookup
then passes that malformed key to cmp_fnames(), which can read past the
end of the kmalloc'ed index buffer.
BUG: KASAN: slab-out-of-bounds in fname_full_size fs/ntfs3/ntfs.h:590 [inline]
BUG: KASAN: slab-out-of-bounds in cmp_fnames+0x1ea/0x230 fs/ntfs3/index.c:46
Read of size 1 at addr ffff88801c313018 by task syz.6.3365/9279
Call Trace:
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xbe/0x130 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xd1/0x650 mm/kasan/report.c:482
kasan_report+0xfb/0x140 mm/kasan/report.c:595
__asan_report_load1_noabort+0x14/0x30 mm/kasan/report_generic.c:378
fname_full_size fs/ntfs3/ntfs.h:590 [inline]
cmp_fnames+0x1ea/0x230 fs/ntfs3/index.c:46
hdr_find_e.isra.0+0x3ed/0x670 fs/ntfs3/index.c:762
indx_find+0x4b5/0x900 fs/ntfs3/index.c:1186
dir_search_u+0x2c0/0x460 fs/ntfs3/dir.c:254
ntfs_lookup+0x1cc/0x2a0 fs/ntfs3/namei.c:85
__lookup_slow+0x241/0x450 fs/namei.c:1816
lookup_slow fs/namei.c:1833 [inline]
walk_component+0x31c/0x570 fs/namei.c:2151
link_path_walk+0x592/0xd60 fs/namei.c:2519
path_lookupat+0x138/0x660 fs/namei.c:2675
filename_lookup+0x1f3/0x560 fs/namei.c:2705
filename_setxattr+0xad/0x1c0 fs/xattr.c:660
path_setxattrat+0x1d8/0x280 fs/xattr.c:713
__do_sys_lsetxattr fs/xattr.c:754 [inline]
__se_sys_lsetxattr fs/xattr.c:750 [inline]
__x64_sys_lsetxattr+0xd0/0x150 fs/xattr.c:750
...
Allocated by task 9279:
kasan_save_stack+0x39/0x70 mm/kasan/common.c:56
kasan_save_track+0x14/0x40 mm/kasan/common.c:77
kasan_save_alloc_info+0x37/0x60 mm/kasan/generic.c:573
poison_kmalloc_redzone mm/kasan/common.c:400 [inline]
__kasan_kmalloc+0xc3/0xd0 mm/kasan/common.c:417
kasan_kmalloc include/linux/kasan.h:262 [inline]
__do_kmalloc_node mm/slub.c:5650 [inline]
__kmalloc_noprof+0x2bd/0x900 mm/slub.c:5662
kmalloc_noprof include/linux/slab.h:961 [inline]
indx_read+0x41d/0xad0 fs/ntfs3/index.c:1059
indx_find+0x447/0x900 fs/ntfs3/index.c:1179
dir_search_u+0x2c0/0x460 fs/ntfs3/dir.c:254
ntfs_lookup+0x1cc/0x2a0 fs/ntfs3/namei.c:85
__lookup_slow+0x241/0x450 fs/namei.c:1816
lookup_slow fs/namei.c:1833 [inline]
walk_component+0x31c/0x570 fs/namei.c:2151
link_path_walk+0x592/0xd60 fs/namei.c:2519
path_lookupat+0x138/0x660 fs/namei.c:2675
filename_lookup+0x1f3/0x560 fs/namei.c:2705
filename_setxattr+0xad/0x1c0 fs/xattr.c:660
path_setxattrat+0x1d8/0x280 fs/xattr.c:713
__do_sys_lsetxattr fs/xattr.c:754 [inline]
__se_sys_lsetxattr fs/xattr.c:750 [inline]
__x64_sys_lsetxattr+0xd0/0x150 fs/xattr.c:750
...
[CAUSE]
The index-header validators only validated INDEX_HDR-level geometry.
They did not walk each NTFS_DE to verify entry alignment, subnode
layout, or that key_size fit inside the entry payload. They also
allowed a last sentinel entry to carry a non-zero key_size.
[FIX]
Walk every NTFS_DE in ntfs3's index-header validators and reject
entries with invalid layout, mismatched subnode state, oversized
key_size, or non-zero sentinel keys before lookup or log replay can
consume them. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Set tb->root_switch to NULL when domain is stopped
Similarly what we do with the firmware connection manager. This makes
tb_xdp_handle_request() return error to the remote host. However, we
need to make sure we keep the uuid alive so that we can reply until the
whole domain is released. |
| Incorrect Privilege Assignment vulnerability in MultiVendorX Product Catalog Enquiry for WooCommerce by MultiVendorX woocommerce-catalog-enquiry allows Privilege Escalation.This issue affects Product Catalog Enquiry for WooCommerce by MultiVendorX: from n/a through 6.1.5. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: embed f2fs_gc_kthread in f2fs_sb_info
Instead of allocating f2fs_gc_kthread dynamically, embed it in
f2fs_sb_info. This simplifies lifetime management and prepares for
fixing race conditions during teardown.
- __sbi_store - remount|shutdown
- f2fs_stop_gc_thread
- access sbi->gc_thread
- sbi->gc_thread = NULL
- access sbi->gc_thread->f2fs_gc_task |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: validate TX_CMD response layout
TX_CMD parsing uses frame_count to walk status entries and then
read the trailing SCD SSN. Make the minimum-length check follow
that exact runtime layout calculation before parsing the payload.
For new TX API, reject TX_CMD responses with frame_count != 1 and
warn/return in the aggregation handler to document that aggregated
accounting is expected via BA notifications. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: validate sta_id in BA window status notif
BA_WINDOW_STATUS_NOTIFICATION_ID extracts a 5-bit sta_id from the
firmware notification and uses it to index fw_id_to_mac_id[] without
bounds checking. Validate sta_id before array access to prevent
out-of-bounds indexing. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix double fput
Fix a double fput() in error handling in cachefiles_create_tmpfile(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: tree-checker: validate INODE_REF's namelen
[BUG]
A crafted btrfs image can trigger the following crash:
BUG: unable to handle page fault for address: ffffd1dc42884000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
CPU: 9 UID: 0 PID: 1034 Comm: poc Not tainted 7.1.0-rc4-custom+ #383 PREEMPT(full) 46af0a92938a63be7132e0dfd71e62327c51d5c2
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:memcpy+0xc/0x10
Call Trace:
<TASK>
read_extent_buffer+0xe4/0x100 [btrfs 3cf0785dd58fec8c5ff84633b772f17ce1f92a8f]
btrfs_get_name+0x15e/0x1e0 [btrfs 3cf0785dd58fec8c5ff84633b772f17ce1f92a8f]
reconnect_path+0x165/0x390
exportfs_decode_fh_raw+0x337/0x400
? drop_caches_sysctl_handler+0xb0/0xb0
</TASK>
---[ end trace 0000000000000000 ]---
RIP: 0010:memcpy+0xc/0x10
Kernel panic - not syncing: Fatal exception
[CAUSE]
TThe crafted image has the following corrupted INODE_REF item:
item 9 key (258 INODE_REF 257) itemoff 11544 itemsize 4106
index 2 namelen 4096 name: d\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000
The itemsize matches the namelen, but the namelen is 4096, way larger
than normal name length limit (BTRFS_NAME_LEN, 255).
Meanwhile the memory of the @name is only 255 byte sized, this will cause
out-of-boundary access, and cause the above crash.
[FIX]
Add extra namelen verification for INODE_REF, just like what we have
done in ROOT_REF checks.
Now the crafted image can be rejected gracefully:
BTRFS critical (device dm-2): corrupt leaf: root=5 block=30572544 slot=14 ino=259, invalid inode ref name length, has 4096 expect [1, 255]
BTRFS error (device dm-2): read time tree block corruption detected on logical 30572544 mirror 2
[ Rebase, add a Link: tag, add an simple cause analyze ] |
