| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in whuan132 AIBattery up to 1.0.9. The affected element is an unknown function of the file AIBatteryHelper/XPC/BatteryXPCService.swift of the component com.collweb.AIBatteryHelper. The manipulation results in missing authentication. The attack requires a local approach. The exploit has been made public and could be used. |
| Ratify is a verification engine as a binary executable and on Kubernetes which enables verification of artifact security metadata and admits for deployment only those that comply with policies the user creates. In a Kubernetes environment, Ratify can be configured to authenticate to a private Azure Container Registry (ACR). The Azure workload identity and Azure managed identity authentication providers are configured in this setup. Users that configure a private ACR to be used with the Azure authentication providers may be impacted by a vulnerability that exists in versions prior to 1.2.3 and 1.3.2. Both Azure authentication providers attempt to exchange an Entra ID (EID) token for an ACR refresh token. However, Ratify’s Azure authentication providers did not verify that the target registry is an ACR. This could have led to the EID token being presented to a non-ACR registry during token exchange. EID tokens with ACR access can potentially be extracted and abused if a user workload contains an image reference to a malicious registry. As of versions 1.2.3 and 1.3.2, the Azure workload identity and Azure managed identity authentication providers are updated to add new validation prior to EID token exchange. Validation relies upon registry domain validation against a pre-configured list of well-known ACR endpoints. EID token exchange will be executed only if at least one of the configured well-known domain suffixes (wildcard support included) matches the registry domain of the image reference. |
| sudo-rs is a memory safe implementation of sudo and su written in Rust. With `Defaults targetpw` (or `Defaults rootpw`) enabled, the password of the target account (or root account) instead of the invoking user is used for authentication. sudo-rs starting in version 0.2.5 and prior to version 0.2.10 incorrectly recorded the invoking user’s UID instead of the authenticated-as user's UID in the authentication timestamp. Any later `sudo` invocation on the same terminal while the timestamp was still valid would use that timestamp, potentially bypassing new authentication even if the policy would have required it. A highly-privileged user (able to run commands as other users, or as root, through sudo) who knows one password of an account they are allowed to run commands as, would be able to run commands as any other account the policy permits them to run commands for, even if they don't know the password for those accounts. A common instance of this would be that a user can still use their own password to run commands as root (the default behaviour of `sudo`), effectively negating the intended behaviour of the `targetpw` or `rootpw` options. Version 0.2.10 contains a patch for the issue. Versions prior to 0.2.5 are not affected, since they do not offer `Defaults targetpw` or `Defaults rootpw`. |
| The Evertz SDVN 3080ipx-10G is a High Bandwidth Ethernet Switching Fabric for Video Application. This device exposes a web management interface on port 80. This web management interface can be used by administrators to control product
features, setup network switching, and register license among other features. The application has been developed in PHP with the webEASY SDK, also named ‘ewb’ by Evertz.
This web interface has two endpoints that are vulnerable to arbitrary command injection (CVE-2025-4009, CVE-2025-10364) and the authentication mechanism has a flaw leading to authentication bypass (CVE-2025-10365).
Remote unauthenticated attackers can gain arbitrary command execution with elevated privileges ( root ) on affected devices.
This level of access could lead to serious business impact such as the interruption of media streaming, modification of media being streamed, alteration of closed captions being generated, among others. |
| A denial-of-service vulnerability exists in CyberPower PowerPanel Business (PPB) 4.11.0.
An unauthenticated remote attacker can restart the ppbd.exe process via the PowerPanel Business Service Watchdog service listening on TCP port 2003. The attacker can repeatedly restart ppbd.exe to render it unavailable. |
| An issue in compop.ca ONLINE MALL v.3.5.3 allows a remote attacker to execute arbitrary code via the rid, tid, et, and ts parameters. |
| A vulnerability has been identified in SENTRON 7KM PAC3200 (All versions). Affected devices only provide a 4-digit PIN to protect from administrative access via Modbus TCP interface. Attackers with access to the Modbus TCP interface could easily bypass this protection by brute-force attacks or by sniffing the Modbus clear text communication. |
| SPID.AspNetCore.Authentication is an AspNetCore Remote Authenticator for SPID. Authentication using Spid and CIE is based on the SAML2 standard which provides two entities: Identity Provider (IDP): the system that authenticates users and provides identity information (SAML affirmation) to the Service Provider, in essence, is responsible for the management of the credentials and identity of users; Service Provider (SP): the system that provides a service to the user and relies on the Identity Provider to authenticate the user, receives SAML assertions from the IdP to grant access to resources. The validation logic of the signature is central as it ensures that you cannot create a SAML response with arbitrary assertions and then impersonate other users. There is no guarantee that the first signature refers to the root object, it follows that if an attacker injects an item signed as the first element, all other signatures will not be verified. The only requirement is to have an XML element legitimately signed by the IdP, a condition that is easily met using the IdP's public metadata. An attacker could create an arbitrary SAML response that would be accepted by SPs using vulnerable SDKs, allowing him to impersonate any Spid and/or CIE user. This vulnerability has been addressed in version 3.4.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Anyquery is an SQL query engine built on top of SQLite. Versions 0.4.3 and below allow attackers who have already gained access to localhost, even with low privileges, to use the http server through the port unauthenticated, and access private integration data like emails, without any warning of a foreign login from the provider. This issue is fixed in version 0.4.4. |
| scratch-coding-hut.github.io is the website for Coding Hut. In 1.0-beta3 and earlier, the login link can be used to login to any account by changing the username in the username field. |
| Scratch-Coding-Hut.github.io is the website for Coding Hut. The website as of 28 February 2025 contained a sign in with scratch username and password form. Any user who used the sign in page would be susceptible to any other user signing into their account. As of time of publication, a fix is not available but work on a fix is underway. As a workaround, users should avoid signing in. |
| An authentication bypass vulnerability in anji-plus AJ-Report up to v1.4.2 allows unauthenticated attackers to execute arbitrary code via a crafted URL. |
| CVE-2024-6078 IMPACT
An improper authentication vulnerability exists in the affected product, which could allow a malicious user to generate cookies for any user ID without the use of a username or password. If exploited, a malicious user could take over the account of a legitimate user. The malicious user would be able to view and modify data stored in the cloud. |
| Improper authentication in the web-based management interface of NETLINK HG322G V1.0.00-231017, allows a remote unauthenticated attacker to escalate privileges and lock out the legitimate administrator via crafted HTTP requests. |
| A vulnerability was identified in huggingface LeRobot up to 0.3.3. Affected by this vulnerability is an unknown functionality of the file lerobot/common/robot_devices/robots/lekiwi_remote.py of the component ZeroMQ Socket Handler. The manipulation leads to missing authentication. The attack can only be initiated within the local network. The vendor was contacted early about this disclosure but did not respond in any way. |
| An issue was discovered in Dynamicweb before 9.12.8. An attacker can add a new administrator user without authentication. This flaw exists due to a logic issue when determining if the setup phases of the product can be run again. Once an attacker is authenticated as the new admin user they have added, it is possible to upload an executable file and achieve command execution. This is fixed in 9.5.9, 9.6.16, 9.7.8, 9.8.11, 9.9.8, 9.10.18, 9.12.8, and 9.13.0 (and later). |
| BCryptPasswordEncoder.matches(CharSequence,String) will incorrectly return true for passwords larger than 72 characters as long as the first 72 characters are the same. |
| A vulnerability classified as problematic was found in Lucky LM-520-SC, LM-520-FSC and LM-520-FSC-SAM up to 20250321. Affected by this vulnerability is an unknown functionality. The manipulation leads to missing authentication. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Cobbler, a Linux installation server that allows for rapid setup of network installation environments, has an improper authentication vulnerability starting in version 3.0.0 and prior to versions 3.2.3 and 3.3.7. `utils.get_shared_secret()` always returns `-1`, which allows anyone to connect to cobbler XML-RPC as user `''` password `-1` and make any changes. This gives anyone with network access to a cobbler server full control of the server. Versions 3.2.3 and 3.3.7 fix the issue. |
| Sentry is a developer-first error tracking and performance monitoring tool. A critical vulnerability was discovered in the SAML SSO implementation of Sentry. It was reported to us via our private bug bounty program. The vulnerability allows an attacker to take over any user account by using a malicious SAML Identity Provider and another organization on the same Sentry instance. The victim email address must be known in order to exploit this vulnerability. The Sentry SaaS fix was deployed on Jan 14, 2025. For self hosted users; if only a single organization is allowed `(SENTRY_SINGLE_ORGANIZATION = True)`, then no action is needed. Otherwise, users should upgrade to version 25.1.0 or higher. There are no known workarounds for this vulnerability. |
