| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
eth: bnxt: avoid deadlock when canceling IRQ affinity notifier
Unregistering IRQ affinity notifiers waits for the callback synchronously.
bnxt takes the netdev instance lock in the notifier (to restart the queue)
and cancels the work under the same lock. This may obviously deadlock.
Move the restart to the async service task. The queue restart isn't
super time sensitive. Store the new TPH tag, schedule the task.
Safely canceling the service task is already ironed out.
In bnxt_request_irq() the order of registering notifier, affinity and
initial TPH programming has to be inverted. I think it was racy
previously since user may trigger an update as soon as notifier
is installed.
There's a small known gap - if pcie_tph_get_cpu_st() fails at init
and the target tag is 0 we may miss programming the entry.
This does not seem worth fixing, the code has skip-on-failure
all over the place, anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvlan: inherit needed_headroom and needed_tailroom from phy_dev
ipvlan devices inherit hard_header_len from phy_dev during ipvlan_init(),
but leave needed_headroom and needed_tailroom set to 0.
When the underlying phy_dev (or stacked lower device) requires extra headroom
or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or
veth with rx headroom), upper layers calculating packet headroom and tailroom
fail to reserve sufficient space.
This can result in reallocation overhead, skb headroom underflows, or KASAN
slab-use-after-free crashes when dev_hard_header() / ipvlan_hard_header()
prepends header data or when lower devices append tailroom.
Fix this by:
1. Inheriting needed_headroom and needed_tailroom from phy_dev in ipvlan_init().
2. Propagating needed_headroom and needed_tailroom updates to attached ipvlans
in ipvlan_device_event() when receiving NETDEV_FEAT_CHANGE events. |
| In the Linux kernel, the following vulnerability has been resolved:
macvlan: inherit needed_headroom and needed_tailroom from lowerdev
macvlan devices inherit hard_header_len from lowerdev during macvlan_init(),
but leave needed_headroom and needed_tailroom set to 0.
When the underlying lowerdev requires extra headroom or tailroom for
headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx
headroom), upper layers calculating packet headroom and tailroom fail to
reserve sufficient space.
This can result in reallocation overhead, skb headroom underflows, or KASAN
slab-use-after-free crashes when dev_hard_header() / macvlan_hard_header()
prepends header data or when lower devices append tailroom.
Fix this by:
1. Inheriting needed_headroom and needed_tailroom from lowerdev in macvlan_init().
2. Propagating needed_headroom and needed_tailroom updates to attached macvlans
in macvlan_device_event() when receiving NETDEV_FEAT_CHANGE events. |
| In the Linux kernel, the following vulnerability has been resolved:
veth: fix queue index used to wake the peer txq in veth_poll
veth_poll() derives the index of the peer TX queue to wake from
rq->xdp_rxq.queue_index. That field is only initialized by
xdp_rxq_info_reg() in veth_enable_xdp_range(), which runs only when an
XDP program is attached. On the plain GRO/NAPI path
(veth_napi_enable_range()) xdp_rxq_info_reg() is never called, so
queue_index stays 0 for every queue, as priv->rq is zero-allocated.
So in a multi-queue setup with GRO enabled and no XDP program attached,
every NAPI instance looks at the peer's TX queue 0. If veth_xmit() stops
peer TX queue 1 because the ptr_ring is full (NETDEV_TX_BUSY), nothing
ever wakes it again: the poller draining queue 1 wakes queue 0 instead.
veth implements no ndo_tx_timeout, so the netdev watchdog does not kick
in either, and the queue stays stopped indefinitely.
Derive the index from the position of the rq within priv->rq instead,
which is correct regardless of whether XDP was ever enabled.
Scripts to reproduce the stall are available at
https://github.com/netoptimizer/veth-backpressure-performance-testing |
| In the Linux kernel, the following vulnerability has been resolved:
net: ngbe: fix NULL pointer dereference in non-MSI-X interrupt enabling
In non-MSI-X mode (such as legacy INTx or single MSI), wx->msix_entry is
not allocated or initialized. Calling NGBE_INTR_MISC(wx) dereferences
wx->msix_entry->entry, leading to a NULL pointer dereference crash.
This issue was introduced by fixing the IRQ vector when the number of
VFs is 7. Fix the issue by explicitly checking `pdev->msix_enabled` to
determine the correct vector index.
Additionally, as a side fix, set the interrupt mask to BIT(0) for the
non-MSI-X fallback. In MSI/INTx mode, the MISC and queue interrupts
share vector 0, and the WX_PX_MISC_IVAR register is only valid in the
MSI-X case. Thus, BIT(0) is the correct mask for the miscellaneous cause
when MSI-X is disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain
tcf_action_exec() handles TC_ACT_GOTO_CHAIN by first checking
rcu_access_pointer(a->goto_chain) and then calling
tcf_action_goto_chain_exec(), which does a second, independent
rcu_dereference_bh(a->goto_chain) read and immediately dereferences
chain->filter_chain. A concurrent tcf_action_set_ctrlact() (e.g. the gact
replace path) can clear a->goto_chain between the two reads, so the second
read returns NULL and tcf_action_goto_chain_exec() dereferences NULL.
Fix the race by doing a single rcu_dereference_bh() read of a->goto_chain
in tcf_action_exec(), checking it once for NULL, and passing the resulting
chain pointer into tcf_action_goto_chain_exec(). This turns the split
check/use into a single check/use on one value. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: skip hash tables in u32_bind_class()
u32_walk() enumerates both struct tc_u_hnode and struct tc_u_knode
through the walker callback. u32_bind_class() unconditionally casts the
passed fh to tc_u_knode and accesses &n->res, so when fh is actually a
tc_u_hnode, which has no tcf_result member, this results in a
slab-out-of-bounds read of res->classid in tc_cls_bind_class().
The issue can be reproduced with the following commands:
tc qdisc add dev lo root handle 1: hfsc
tc class add dev lo parent 1: classid 1:1 hfsc sc rate 1000kbit
tc filter add dev lo parent 1:1 protocol ip prio 1 u32 match u32 0 0 flowid 1:1
tc class add dev lo parent 1: classid 1:2 hfsc sc rate 2000kbit
Fix this by skipping hash tables via the TC_U32_KEY(handle) check. |
| In the Linux kernel, the following vulnerability has been resolved:
regmap: sdw-mbq: don't call an unset readable_reg callback
regmap_sdw_mbq_poll_busy() decides whether to poll the Function Busy bit
by calling ctx->readable_reg(), which is a straight copy of
config->readable_reg. That callback is optional: regmap_readable() treats
a NULL ->readable_reg as "every register is readable", and drivers rely on
that. es9356 and tac5xx2-sdw both build an MBQ regmap without one.
Since commit ca1b11b36d82 ("regmap: sdw-mbq: Allow defers on undeferrable
controls") the poll runs on every -ENODATA, not only for Controls the
driver marked deferrable, so any of those devices answering
COMMAND_IGNORED takes the kernel through a NULL function pointer.
Treat a missing callback the way the rest of regmap does and poll. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: ti: am65-cpsw-nuss: Fix port_id extraction from SRC TAG
On the packet reception path, the ID of the MAC Port on which the packet
was received, is embedded in the RX DMA Descriptor's metadata. The ID is
extracted using the helper function cppi5_desc_get_tags_ids() which fills
in the 16-bit Source Tag into the 'port_id' variable. However, it is only
the lower 8-bits of the 16-bit Source Tag that represent the MAC Port ID,
while the upper 8-bits are Hardware-Reserved and carry an arbitrary value.
With the existing logic, sporadic kernel crash is observed due to the
subsequent driver code accessing out-of-bound memory because of an invalid
port_id.
Hence, fix the port_id extraction logic to use only the lower 8-bits of the
Source Tag as the MAC Port ID. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_bpf: reject dev-bound programs bound to a different device
cls_bpf_prog_from_efd() obtained a SCHED_CLS program via
bpf_prog_get_type_dev() but never verified that a device-bound (offloaded)
program's bound netdev matches the TC netdev the classifier is being
attached to. This let a program loaded with prog_ifindex for device A be
attached via cls_bpf + skip_sw to device B; deleting device A then
destroyed the program's offload state while it was still attached to
device B, triggering a netdevsim WARN (panic with panic_on_warn=1).
Mirror the XDP attach path (net/core/dev.c) and reject the attach with
-EINVAL when a dev-bound program's bound device does not match the
target device. |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: fix tunnel and session refcount leak on seq_file release
In pppol2tp_proc_open() and l2tp_dfs_seq_open(), iteration state
(pd->tunnel and pd->session) is kept in seq_file private data to allow
iteration across multiple read() system calls.
However, if userspace closes /proc/net/pppol2tp or /sys/kernel/debug/l2tp/tunnels
before reading to end-of-file (EOF), any tunnel or session reference stored in
pd->tunnel / pd->session is left un-dropped when seq_file private data is freed.
Fix this by dropping any remaining pd->tunnel and pd->session references in
pppol2tp_proc_release() and l2tp_dfs_seq_release() when closing the file. |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: ohci: fix NULL pointer dereference in ar_context_release
During the error handling path of the driver's probe function, a NULL
pointer dereference can occur in ar_context_release().
When pci_probe() fails early (e.g., if pcim_enable_device() or MMIO mapping
fails), the devres cleanup mechanism invokes release_ohci(). This function
unconditionally calls ar_context_release() to clean up the asynchronous
receive contexts. However, if ar_context_init() was not yet called,
ctx->ohci remains NULL (as the fw_ohci structure is zero-initialized by
devres_alloc()).
ar_context_release() immediately dereferences ctx->ohci to get the dev
pointer before checking if the context was actually initialized, leading to
a crash:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:ar_context_release+0x3f/0x380 drivers/firewire/ohci.c:543
Call Trace:
release_ohci+0x3f/0x60 drivers/firewire/ohci.c:3567
release_nodes drivers/base/devres.c:546 [inline]
devres_release_all+0x1a8/0x260 drivers/base/devres.c:576
device_unbind_cleanup drivers/base/dd.c:597 [inline]
really_probe+0x451/0xae0 drivers/base/dd.c:772
To fix this, move the assignment of the dev pointer after the !ctx->buffer
check. If ctx->buffer is NULL, it indicates that the context was never
successfully initialized and there is nothing to release, safely avoiding
the dereference of the uninitialized ctx->ohci pointer. |
| A malicious actor with access to the network could exploit an Improper Input Validation vulnerability found in UniFi Talk Application to execute a Command Injection on the host device. |
| LogTape is an unobtrusive logging library. Prior to 1.3.11, 2.0.14, and 2.1.5, the @logtape/syslog package's escapeStructuredDataValue() function in packages/syslog/src/syslog.ts does not neutralize C0 control characters from U+0000 through U+001F in structured data values, and formatStructuredData() inserts property keys without validating the RFC 5424 SD-NAME grammar. When includeStructuredData is true, an attacker-controlled newline can terminate an RFC 6587 non-transparent TCP syslog frame and make following bytes appear as a forged RFC 5424 record, while a key containing a closing bracket or other forbidden character can terminate or corrupt the structured-data element. Applications that forward attacker-controlled property values or keys can therefore allow forged records with arbitrary hosts, applications, process identifiers, facilities, or severity levels, undermining downstream collector and SIEM integrity. This issue is fixed in versions 1.3.11, 2.0.14, and 2.1.5. |
| IzPack is a widely used tool for packaging applications on the Java platform as cross-platform installers. In 5.2.6 and earlier, UnpackerBase.unpack() in izpack-installer/src/main/java/com/izforge/izpack/installer/unpacker/UnpackerBase.java obtains an attacker-controlled PackFile targetPath, passes it through IoHelper.translatePath(), which only converts separators, and constructs a File without normalizing parent-directory segments or enforcing destination containment. A malicious installer pack entry containing ../ sequences can therefore write outside the intended installation directory to startup folders, executable search paths, or other locations accessible with the victim's privileges when the victim runs the installer. |
| Kyverno is a policy engine designed for cloud native platform engineering teams. From 1.18.0 until 1.18.2, the NamespacedMutatingPolicy CEL compiler exposes the generator library to matchConditions, allowing a namespace-scoped policy to invoke generator.apply(namespace, resources) with an arbitrary target namespace. The validation in pkg/cel/policies/mpol/validate.go checks that the policy compiles but does not enforce namespace scope, and GenerateResources in pkg/cel/libs/context.go does not reject the cross-namespace target. A user who can create NamespacedMutatingPolicy objects in one namespace can cause the admission controller, operating with cluster-wide privileges, to create ConfigMaps, NetworkPolicies, Secrets, RoleBindings, and other resources in another namespace, enabling unauthorized modification and potential privilege escalation. This issue is fixed in version 1.18.2. |
| kas is a setup tool for bitbake based projects. Prior to 5.4, internal SSH key setup triggered by SSH_PRIVATE_KEY or SSH_PRIVATE_KEY_FILE creates ~/.ssh/config when no user-specific SSH configuration exists and adds a global Host * rule containing StrictHostKeyChecking no. In kas/libcmds.py, ssh_no_host_key_check() runs without checking ctx.managed_env, so the setting persists after kas exits and affects future SSH sessions by the same local user, extending beyond the intended short-lived continuous integration environment. A later SSH connection can therefore accept an attacker-controlled host key without verification, increasing the risk of a man-in-the-middle attack that compromises session confidentiality or integrity. This issue is fixed in version 5.4. |
| Starlette-Admin is a fast, beautiful and extensible administrative interface framework for FastAPI and Starlette applications. Prior to 0.16.1, the list API does not validate user-supplied order_by and structured where field names against the configured sortable_fields and searchable_fields allowlists. An authenticated user with access to an affected list endpoint can submit arbitrary field names to starlette_admin/base.py and the BaseModelView validation path, bypassing restrictions presented by the administrative user interface. Requests can sort or filter on fields that are not intended to be sortable or searchable, causing limited information exposure. Invalid field names and special Python attribute names such as metadata and the class dunder attribute can also trigger unhandled exceptions and HTTP 500 responses, causing limited denial of service for targeted requests. This issue is fixed in version 0.16.1. |
| Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, an unauthenticated HTTP/2 peer can cause an out-of-memory denial of service in the Ember backend with HTTP/2 enabled. The Hpack wrapper in ember-core/shared/src/main/scala/org/http4s/ember/core/h2/Hpack.scala concatenates HEADERS and CONTINUATION frame fragments and decodes them into a single List, but maxHeaderSize accounting does not include indexed headers or HPACK per-header overhead. A small compressed header block can therefore expand into a much larger decoded representation that remains in memory for processing. Servers exposed to untrusted HTTP/2 traffic and clients directed to an untrusted HTTP/2 server are affected, and concurrent malicious connections can exhaust the process heap. This issue is fixed in versions 0.23.35 and 1.0.0-M47. |
| The IEEE 1588 PTP management-message parser in subsys/net/lib/ptp/tlv.c mishandles the PTP_MGMT_TIME management id. In tlv_mgmt_post_recv(), the PTP_MGMT_TIME case casts mgmt_tlv->data to a 10-byte struct ptp_timestamp and reads it (then byte-swaps and writes it back) without first checking that the TLV data field is at least sizeof(struct ptp_timestamp). Every sibling management id in the same switch validates its length first; PTP_MGMT_TIME was the only case lacking that check.
The length passed in is the management data size (tlv->length - 2), and the upstream guard in ptp_tlv_post_recv() only requires tlv->length > 2, while msg_tlv_post_recv() validates only that the TLV fits within the received byte count, not a per-id minimum. A peer on the local PTP segment can therefore send a PTP_MSG_MANAGEMENT message carrying a short PTP_MGMT_TIME TLV (data as small as 2 bytes), causing the parser to read and write 8 bytes beyond the validated data. The message type and TLV contents are taken straight off the wire, so the path is reachable by any adjacent attacker when CONFIG_PTP is enabled.
The over-read and write-back stay within the struct ptp_msg allocation (mgmt_tlv->data lives in the leading mtu[NET_ETH_MTU] union member, so data + 10 lands at most a few bytes past mtu[], inside the same object), so this is an out-of-bounds read of adjacent in-object memory plus a bounded in-place corruption of the message's parsed timestamp, not past-allocation memory corruption. Impact is limited to minor information exposure of adjacent bytes and corruption of the device's parsed management TIME value; there is no crash on the access and no reachable reference-count corruption.
The fix adds if (length < sizeof(struct ptp_timestamp)) { return -EBADMSG; } before the cast, matching the other management-id cases and fully closing the receive-path defect. |
