| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix stack-out-of-bounds write in devmap
get_upper_ifindexes() iterates over all upper devices and writes their
indices into an array without checking bounds.
Also the callers assume that the max number of upper devices is
MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack,
but that assumption is not correct and the number of upper devices could
be larger than MAX_NEST_DEV (e.g., many macvlans), causing a
stack-out-of-bounds write.
Add a max parameter to get_upper_ifindexes() to avoid the issue.
When there are too many upper devices, return -EOVERFLOW and abort the
redirect.
To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with
an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS.
Then send a packet to the device to trigger the XDP redirect path. |
| ipmi-oem in FreeIPMI before 1.16.17 has exploitable buffer overflows on response messages. The Intelligent Platform Management Interface (IPMI) specification defines a set of interfaces for platform management. It is implemented by a large number of hardware manufacturers to support system management. It is most commonly used for sensor reading (e.g., CPU temperatures through the ipmi-sensors command within FreeIPMI) and remote power control (the ipmipower command). The ipmi-oem client command implements a set of a IPMI OEM commands for specific hardware vendors. If a user has supported hardware, they may wish to use the ipmi-oem command to send a request to a server to retrieve specific information. Three subcommands were found to have exploitable buffer overflows on response messages. They are: "ipmi-oem dell get-last-post-code - get the last POST code and string describing the error on some Dell servers," "ipmi-oem supermicro extra-firmware-info - get extra firmware info on Supermicro servers," and "ipmi-oem wistron read-proprietary-string - read a proprietary string on Wistron servers." |
| Mod_gnutls is a TLS module for Apache HTTPD based on GnuTLS. In versions prior to 0.12.3 and 0.13.0, code for client certificate verification imported the certificate chain sent by the client into a fixed size `gnutls_x509_crt_t x509[]` array without checking the number of certificates is less than or equal to the array size. `gnutls_x509_crt_t` is a `typedef` for a pointer to an opaque GnuTLS structure created using with `gnutls_x509_crt_init()` before importing certificate data into it, so no attacker-controlled data was written into the stack buffer, but writing a pointer after the last array element generally triggered a segfault, and could theoretically cause stack corruption otherwise (not observed in practice). Server configurations that do not use client certificates (`GnuTLSClientVerify ignore`, the default) are not affected. The problem has been fixed in version 0.12.3 by checking the length of the provided certificate chain and rejecting it if it exceeds the buffer length, and in version 0.13.0 by rewriting certificate verification to use `gnutls_certificate_verify_peers()`, removing the need for the buffer entirely. There is no workaround. Version 0.12.3 provides the minimal fix for users of 0.12.x who do not wish to upgrade to 0.13.0 yet. |
| Freeciv21 is a free open source, turn-based, empire-building strategy game. Versions prior to 3.1.1 crash with a stack overflow when receiving specially-crafted packets. A remote attacker can use this to take down any public server. A malicious server can use this to crash the game on the player's machine. Authentication is not needed and, by default, logs do not contain any useful information. All users should upgrade to Freeciv21 version 3.1.1. Running the server behind a firewall can help mitigate the issue for non-public servers. For local games, Freeciv21 restricts connections to the current user and is therefore not affected. |
| Product Key Explorer 4.2.0.0 contains a denial of service vulnerability that allows local attackers to crash the application by overflowing the registration name input field. Attackers can create a specially crafted text file with repeated characters to trigger a buffer overflow when pasted into the registration name field, causing the application to crash. |
| A flaw has been found in Belkin F9K1122 1.00.33. The affected element is the function formWISP5G of the file /goform/formWISP5G. Executing a manipulation of the argument webpage can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in D-Link DHP-1320 1.00WWB04. This affects the function redirect_count_down_page of the component SOAP Handler. Such manipulation leads to stack-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was detected in Tenda A18 Pro 02.03.02.28. This vulnerability affects the function form_fast_setting_wifi_set of the file /goform/fast_setting_wifi_set. The manipulation results in stack-based buffer overflow. The attack may be launched remotely. The exploit is now public and may be used. |
| A buffer overflow vulnerability has been reported to affect Media Streaming Add-On. The remote attackers can then exploit the vulnerability to modify memory or crash processes.
We have already fixed the vulnerability in the following version:
Media Streaming Add-on 500.1.1 and later |
| A flaw has been found in Tenda A18 Pro 02.03.02.28. This issue affects the function setSchedWifi of the file /goform/openSchedWifi. This manipulation causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used. |
| A vulnerability has been found in Tenda A18 Pro 02.03.02.28. Impacted is the function fromSetIpMacBind of the file /goform/SetIpMacBind. Such manipulation of the argument list leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability was found in Tenda A18 Pro 02.03.02.28. The affected element is the function set_qosMib_list of the file /goform/formSetQosBand. Performing a manipulation of the argument list results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been made public and could be used. |
| A vulnerability was determined in Tenda A18 Pro 02.03.02.28. The impacted element is the function sub_423B50 of the file /goform/setMacFilterCfg of the component MAC Filtering Configuration Endpoint. Executing a manipulation of the argument deviceList can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. |
| Stack buffer overflow in WebRTC in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to potentially exploit stack corruption via a crafted HTML page. (Chromium security severity: High) |
| OpenWrt Project is a Linux operating system targeting embedded devices. In versions prior to 24.10.6 and 25.12.1, the mdns daemon has a Stack-based Buffer Overflow vulnerability in the parse_question function. The issue is triggered by PTR queries for reverse DNS domains (.in-addr.arpa and .ip6.arpa). DNS packets received on UDP port 5353 are expanded by dn_expand into an 8096-byte global buffer (name_buffer), which is then copied via an unbounded strcpy into a fixed 256-byte stack buffer when handling TYPE_PTR queries. The overflow is possible because dn_expand converts non-printable ASCII bytes (e.g., 0x01) into multi-character octal representations (e.g., \001), significantly inflating the expanded name beyond the stack buffer's capacity. A crafted DNS packet can exploit this expansion behavior to overflow the stack buffer, making the vulnerability reachable through normal multicast DNS packet processing. This issue has been fixed in versions 24.10.6 and 25.12.1. |
| OpenWrt Project is a Linux operating system targeting embedded devices. In versions prior to 24.10.6 and 25.12.1, the mdns daemon has a Stack-based Buffer Overflow vulnerability in the match_ipv6_addresses function, triggered when processing PTR queries for IPv6 reverse DNS domains (.ip6.arpa) received via multicast DNS on UDP port 5353. During processing, the domain name from name_buffer is copied via strcpy into a fixed 256-byte stack buffer, and then the reverse IPv6 request is extracted into a buffer of only 46 bytes (INET6_ADDRSTRLEN). Because the length of the data is never validated before this extraction, an attacker can supply input larger than 46 bytes, causing an out-of-bounds write. This allows a specially crafted DNS query to overflow the stack buffer in match_ipv6_addresses, potentially enabling remote code execution. This issue has been fixed in versions 24.10.6 and 25.12.1. |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data using a variety of encodings and compression methods. For the `VARINT` and `CONST` encodings, incomplete validation of the context in which the encodings were used could result in up to eight bytes being written beyond the end of a heap allocation, or up to eight bytes being written to the location of a one byte variable on the stack, possibly causing the values to adjacent variables to change unexpectedly. Depending on the data stream this could result either in a heap buffer overflow or a stack overflow. If a user opens a file crafted to exploit this issue it could lead to the program crashing, overwriting of data structures on the heap or stack in ways not expected by the program, or changing the control flow of the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data using a variety of encodings and compression methods. When reading data encoded using the `BYTE_ARRAY_LEN` method, the `cram_byte_array_len_decode()` failed to validate that the amount of data being unpacked matched the size of the output buffer where it was to be stored. Depending on the data series being read, this could result either in a heap or a stack overflow with attacker-controlled bytes. Depending on the data stream this could result either in a heap buffer overflow or a stack overflow. If a user opens a file crafted to exploit this issue it could lead to the program crashing, overwriting of data structures on the heap or stack in ways not expected by the program, or changing the control flow of the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. |
| PX4 is an open-source autopilot stack for drones and unmanned vehicles. Versions 1.17.0-rc2 and below are vulnerable to Stack-based Buffer Overflow through the MavlinkLogHandler, and are triggered via MAVLink log request. The LogEntry.filepath buffer is 60 bytes, but the sscanf function parses paths from the log list file with no width specifier, allowing a path longer than 60 characters to overflow the buffer. An attacker with MAVLink link access can trigger this by first creating deeply nested directories via MAVLink FTP, then requesting the log list. The flight controller MAVLink task crashes, losing telemetry and command capability and causing DoS. This issue has been fixed in this commit: https://github.com/PX4/PX4-Autopilot/commit/616b25a280e229c24d5cf12a03dbf248df89c474. |
| A flaw was found in libxml2's xmlBuildQName function, where integer overflows in buffer size calculations can lead to a stack-based buffer overflow. This issue can result in memory corruption or a denial of service when processing crafted input. |
