| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| matrix-js-sdk is the Matrix Client-Server SDK for JavaScript and TypeScript. In matrix-js-sdk versions versions 9.11.0 through 34.7.0, the method `MatrixClient.sendSharedHistoryKeys` is vulnerable to interception by malicious homeservers. The method was introduced by MSC3061) and is commonly used to share historical message keys with newly invited users, granting them access to past messages in the room. However, it unconditionally sends these "shared" keys to all of the invited user's devices, regardless of whether the user's cryptographic identity is verified or whether the user's devices are signed by that identity. This allows the attacker to potentially inject its own devices to receive sensitive historical keys without proper security checks. Note that this only affects clients running the SDK with the legacy crypto stack. Clients using the new Rust cryptography stack (i.e. those that call `MatrixClient.initRustCrypto()` instead of `MatrixClient.initCrypto()`) are unaffected by this vulnerability, because `MatrixClient.sendSharedHistoryKeys()` raises an exception in such environments. The vulnerability was fixed in matrix-js-sdk 34.8.0 by removing the vulnerable functionality. As a workaround, remove use of affected functionality from clients. |
| A flaw was found in Keycloak. When an Active Directory user resets their password, the system updates it without performing an LDAP bind to validate the new credentials against AD. This vulnerability allows users whose AD accounts are expired or disabled to regain access in Keycloak, bypassing AD restrictions. The issue enables authentication bypass and could allow unauthorized access under certain conditions. |
| An issue was discovered on HMS Anybus X-Gateway AB7832-F firmware version 3. The HICP protocol allows unauthenticated changes to a device's network configurations. |
| Symphony process is a module for the Symphony PHP framework which executes commands in sub-processes. When consuming a persisted remember-me cookie, Symfony does not check if the username persisted in the database matches the username attached with the cookie, leading to authentication bypass. This vulnerability is fixed in 5.4.47, 6.4.15, and 7.1.8. |
| Insufficient protection against brute-force and runtime manipulation in the local authentication component in Two App Studio Journey 5.5.6 on iOS allows local attackers to bypass biometric and PIN-based access control via repeated PIN attempts or dynamic code injection. |
| CVE-2024-6078 IMPACT
An improper authentication vulnerability exists in the affected product, which could allow a malicious user to generate cookies for any user ID without the use of a username or password. If exploited, a malicious user could take over the account of a legitimate user. The malicious user would be able to view and modify data stored in the cloud. |
| An authentication bypass vulnerability in anji-plus AJ-Report up to v1.4.2 allows unauthenticated attackers to execute arbitrary code via a crafted URL. |
| An issue was discovered in Newland Nquire 1000 Interactive Kiosk version NQ1000-II_G_V1.00.011, allows remote attackers to escalate privileges and bypass authentication via incorrect access control in the web management portal. |
| An issue was discovered in Dynamicweb before 9.12.8. An attacker can add a new administrator user without authentication. This flaw exists due to a logic issue when determining if the setup phases of the product can be run again. Once an attacker is authenticated as the new admin user they have added, it is possible to upload an executable file and achieve command execution. This is fixed in 9.5.9, 9.6.16, 9.7.8, 9.8.11, 9.9.8, 9.10.18, 9.12.8, and 9.13.0 (and later). |
| A lack of session validation in the web API component of Shenzhen Zhibotong Electronics ZBT WE2001 23.09.27 allows remote unauthenticated attackers to access administrative information-retrieval functions intended for authenticated users. By invoking "get_*" operations, attackers can obtain device configuration data, including plaintext credentials, without authentication or an existing session. |
| A missing authentication mechanism in the web management API components of Shenzhen Zhibotong Electronics ZBT WE2001 23.09.27 allows unauthenticated attackers on the local network to modify router and network configurations. By invoking operations whose names end with "*_nocommit" and supplying the parameters expected by the invoked function, an attacker can change configuration data, including SSID, Wi-Fi credentials, and administrative passwords, without authentication or an existing session. |
| A vulnerability classified as problematic has been found in 70mai 1S up to 20250611. This affects an unknown part of the component Video Services. The manipulation leads to improper authentication. Access to the local network is required for this attack to succeed. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The PayU CommercePro Plugin plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 3.8.3. This is due to /wp-json/payu/v1/generate-user-token and /wp-json/payu/v1/get-shipping-cost REST API endpoints not properly verifying a user's identity prior to setting the users ID and auth cookies. This makes it possible for unauthenticated attackers to create new administrative user accounts. |
| Ory Kratos is an identity, user management and authentication system for cloud services. Prior to version 1.3.0, given a number of preconditions, the `highest_available` setting will incorrectly assume that the identity’s highest available AAL is `aal1` even though it really is `aal2`. This means that the `highest_available` configuration will act as if the user has only one factor set up, for that particular user. This means that they can call the settings and whoami endpoint without a `aal2` session, even though that should be disallowed. An attacker would need to steal or guess a valid login OTP of a user who has only OTP for login enabled and who has an incorrect `available_aal` value stored, to exploit this vulnerability. All other aspects of the session (e.g. the session’s aal) are not impacted by this issue. On the Ory Network, only 0.00066% of registered users were affected by this issue, and most of those users appeared to be test users. Their respective AAL values have since been updated and they are no longer vulnerable to this attack. Version 1.3.0 is not affected by this issue. As a workaround, those who require MFA should disable the passwordless code login method. If that is not possible, check the sessions `aal` to identify if the user has `aal1` or `aal2`. |
| An issue in compop.ca ONLINE MALL v.3.5.3 allows a remote attacker to execute arbitrary code via the rid, tid, et, and ts parameters. |
| OctoPrint-SpoolManager is a plugin for managing spools and all their usage metadata. In versions 1.8.0a2 and older of the testing branch and versions 1.7.7 and older of the stable branch, the APIs of the OctoPrint-SpoolManager plugin do not correctly enforce authentication or authorization checks. This issue has been patched in versions 1.8.0a3 of the testing branch and 1.7.8 of the stable branch. The impact of this vulnerability is greatly reduced when using OctoPrint version 1.11.2 and newer. |
| Improper Authentication vulnerability in Wikimedia Foundation Mediawiki - CentralAuth Extension allows : Bypass Authentication.This issue affects Mediawiki - CentralAuth Extension: from 1.39.X before 1.39.13, from 1.42.X before 1.42.7, from 1.43.X before 1.43.2. |
| Himmelblau is an interoperability suite for Microsoft Azure Entra ID and Intune. Himmelblau versions 0.9.0 through 0.9.14 and 1.00-alpha are vulnerable to a privilege escalation issue when Entra ID group-based access restrictions are configured using group display names instead of object IDs. Starting in version 0.9.0, Himmelblau introduced support for specifying group names in the `pam_allow_groups` configuration option. However, Microsoft Entra ID permits the creation of multiple groups with the same `displayName` via the Microsoft Graph API—even by non-admin users, depending on tenant settings. As a result, a user could create a personal group with the same name as a legitimate access group (e.g., `"Allow-Linux-Login"`), add themselves to it, and be granted authentication or `sudo` rights by Himmelblau. Because affected Himmelblau versions compare group names by either `displayName` or by the immutable `objectId`, this allows bypassing access control mechanisms intended to restrict login to members of official, centrally-managed groups. This issue is fixed in Himmelblau version **0.9.15** and later. In these versions, group name matching in `pam_allow_groups` has been deprecated and removed, and only group `objectId`s (GUIDs) may be specified for secure group-based filtering. To mitigate the issue without upgrading, replace all entries in `pam_allow_groups` with the objectId of the target Entra ID group(s) and/or audit your tenant for groups with duplicate display names using the Microsoft Graph API. |
| fprintd through 1.94.3 lacks a security attention mechanism, and thus unexpected actions might be authorized by "auth sufficient pam_fprintd.so" for Sudo. NOTE: the supplier disputes this because they believe issue resolution would involve modifying the PAM configuration to restrict pam_fprintd.so to front-ends that implement a proper attention mechanism, not modifying pam_fprintd.so or fprintd. |
| MinIO is a high performance object storage. Starting in RELEASE.2024-06-06T09-36-42Z and prior to
RELEASE.2025-02-28T09-55-16Z, a bug in evaluating the trust of the SSH key used in an SFTP connection to MinIO allows authentication bypass and unauthorized data access. On a MinIO server with SFTP access configured and using LDAP as an external identity provider, MinIO supports SSH key based authentication for SFTP connections when the user has the `sshPublicKey` attribute set in their LDAP server. The server trusts the client's key only when the public key is the same as the `sshPublicKey` attribute. Due to the bug, when the user has no `sshPublicKey` property in LDAP, the server ends up trusting the key allowing the client to perform any FTP operations allowed by the MinIO access policies associated with the LDAP user (or any of their groups). Three requirements must be met in order to exploit the vulnerability. First, the MinIO server must be configured to allow SFTP access and use LDAP as an external identity provider. Second, the attacker must have knowledge of an LDAP username that does not have the `sshPublicKey` property set. Third, such an LDAP username or one of their groups must also have some MinIO access policy configured. When this bug is successfully exploited, the attacker can perform any FTP operations (i.e. reading, writing, deleting and listing objects) allowed by the access policy associated with the LDAP user account (and their groups). Version 1.2.0 fixes the issue. |
