| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
can: gs_usb: fix time stamp counter initialization
If the gs_usb device driver is unloaded (or unbound) before the
interface is shut down, the USB stack first calls the struct
usb_driver::disconnect and then the struct net_device_ops::ndo_stop
callback.
In gs_usb_disconnect() all pending bulk URBs are killed, i.e. no more
RX'ed CAN frames are send from the USB device to the host. Later in
gs_can_close() a reset control message is send to each CAN channel to
remove the controller from the CAN bus. In this race window the USB
device can still receive CAN frames from the bus and internally queue
them to be send to the host.
At least in the current version of the candlelight firmware, the queue
of received CAN frames is not emptied during the reset command. After
loading (or binding) the gs_usb driver, new URBs are submitted during
the struct net_device_ops::ndo_open callback and the candlelight
firmware starts sending its already queued CAN frames to the host.
However, this scenario was not considered when implementing the
hardware timestamp function. The cycle counter/time counter
infrastructure is set up (gs_usb_timestamp_init()) after the USBs are
submitted, resulting in a NULL pointer dereference if
timecounter_cyc2time() (via the call chain:
gs_usb_receive_bulk_callback() -> gs_usb_set_timestamp() ->
gs_usb_skb_set_timestamp()) is called too early.
Move the gs_usb_timestamp_init() function before the URBs are
submitted to fix this problem.
For a comprehensive solution, we need to consider gs_usb devices with
more than 1 channel. The cycle counter/time counter infrastructure is
setup per channel, but the RX URBs are per device. Once gs_can_open()
of _a_ channel has been called, and URBs have been submitted, the
gs_usb_receive_bulk_callback() can be called for _all_ available
channels, even for channels that are not running, yet. As cycle
counter/time counter has not set up, this will again lead to a NULL
pointer dereference.
Convert the cycle counter/time counter from a "per channel" to a "per
device" functionality. Also set it up, before submitting any URBs to
the device.
Further in gs_usb_receive_bulk_callback(), don't process any URBs for
not started CAN channels, only resubmit the URB. |
| The issue was addressed with improved checks. This issue is fixed in Safari 18.5, iOS 18.5 and iPadOS 18.5, iPadOS 17.7.7, macOS Sequoia 15.5, tvOS 18.5, visionOS 2.5, watchOS 11.5. Processing maliciously crafted web content may lead to an unexpected process crash. |
| A null pointer dereference was addressed with improved input validation. This issue is fixed in iOS 18.7.7 and iPadOS 18.7.7, iOS 26.4 and iPadOS 26.4, macOS Sequoia 15.7.5, macOS Sonoma 14.8.5, macOS Tahoe 26.4, tvOS 26.4, visionOS 26.4, watchOS 26.4. A user in a privileged network position may be able to cause a denial-of-service. |
| LibJWT is a C JSON Web Token Library. Starting in version 3.0.0 and prior to version 3.3.0, the JWK parsing for RSA-PSS did not protect against a NULL value when expecting to parse JSON string values. A specially crafted JWK file could exploit this behavior by using integers in places where the code expected a string. This was fixed in v3.3.0. A workaround is available. Users importing keys through a JWK file should not do so from untrusted sources. Use the `jwk2key` tool to check for validity of a JWK file. Likewise, if possible, do not use JWK files with RSA-PSS keys. |
| When the ngx_mail_auth_http_module module is enabled on NGINX Plus or NGINX Open Source, undisclosed requests can cause worker processes to terminate. This issue may occur when (1) CRAM-MD5 or APOP authentication is enabled, and (2) the authentication server permits retry by returning the Auth-Wait response header. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In Modem, there is a possible system crash due to incorrect error handling. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01430930; Issue ID: MSV-4836. |
| libfuse is the reference implementation of the Linux FUSE. From version 3.18.0 to before version 3.18.2, a NULL pointer dereference and memory leak in fuse_uring_init_queue allows a local user to crash the FUSE daemon or cause resource exhaustion. When numa_alloc_local fails during io_uring queue entry setup, the code proceeds with NULL pointers. When fuse_uring_register_queue fails, NUMA allocations are leaked and the function incorrectly returns success. Only the io_uring transport is affected; the traditional /dev/fuse path is not affected. PoC confirmed with AddressSanitizer/LeakSanitizer. This issue has been patched in version 3.18.2. |
| NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.14 and 2.12.5, if the nats-server has the "leafnode" configuration enabled (not default), then anyone who can connect can crash the nats-server by triggering a panic. This happens pre-authentication and requires that compression be enabled (which it is, by default, when leafnodes are used). Versions 2.11.14 and 2.12.5 contain a fix. As a workaround, disable compression on the leafnode port. |
| free5GC is an open source 5G core network. free5GC AUSF prior to version 1.4.2 has is an Improper Null Check vulnerability leading to Denial of Service. All deployments of free5GC v4.0.1 using the AUSF UE authentication service (`/nausf-auth/v1/ue-authentications` endpoint) are affected. A remote attacker can cause the AUSF service to panic and crash by sending a crafted UE authentication request that triggers a nil interface conversion in the `GetSupiFromSuciSupiMap` function. This results in complete denial of service for the AUSF authentication service. The `GetSupiFromSuciSupiMap` function attempts to perform an interface conversion from `interface{}` to `*context.SuciSupiMap` without checking if the underlying value is nil. When `SuciSupiMap` is nil, the code panics with "interface conversion: interface {} is nil, not *context.SuciSupiMap". free5GC AUSF version 1.4.2 patches the issue. There is no direct workaround at the application level. The recommendation is to apply the provided patch or restrict access to the AUSF API to trusted sources only. |
| SSH dissector crash in Wireshark 4.4.0 to 4.4.8 allows denial of service |
| IEEE 1609.2 dissector crash in Wireshark 4.2.0, 4.0.0 to 4.0.11, and 3.6.0 to 3.6.19 allows denial of service via packet injection or crafted capture file |
| NULL Pointer Dereference vulnerability in MolotovCherry Android-ImageMagick7.This issue affects Android-ImageMagick7: before 7.1.2-10. |
| NULL Pointer Dereference vulnerability in Softing Industrial Automation GmbH smartLink SW-HT (Webserver modules) allows HTTP DoS.This issue affects smartLink SW-HT: 1.43. |
| Ella Core is a 5G core designed for private networks. Versions prior to 1.6.0 panic when processing a malformed NGAP LocationReport message with `ue-presence-in-area-of-interest` event type and omitting the optional `UEPresenceInAreaOfInterestList` IE. An attacker able to send crafted NGAP messages to Ella Core can crash the process, causing service disruption for all connected subscribers. No authentication is required. Version 1.6.0 added IE presence verification to NGAP message handling. |
| Ella Core is a 5G core designed for private networks. Versions prior to 1.6.0 panic when processing malformed UL NAS Transport NAS messages without a Request Type. An attacker able to send crafted NAS messages to Ella Core can crash the process, causing service disruption for all connected subscribers. No authentication is required. Version 1.6.0 adds a guard when receiving an UL NAS Message without a Request Type given no SM Context. |
| NULL Pointer Dereference vulnerability in taurusxin ncmdump (src/utils modules). This vulnerability is associated with program files cJSON.Cpp.
This issue affects ncmdump: before 1.4.0. |
| NULL Pointer Dereference vulnerability in tmate-io tmate.This issue affects tmate: before 2.4.0. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: ensure node page reads complete before f2fs_put_super() finishes
Xfstests generic/335, generic/336 sometimes crash with the following message:
F2FS-fs (dm-0): detect filesystem reference count leak during umount, type: 9, count: 1
------------[ cut here ]------------
kernel BUG at fs/f2fs/super.c:1939!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 609351 Comm: umount Tainted: G W 6.17.0-rc5-xfstests-g9dd1835ecda5 #1 PREEMPT(none)
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:f2fs_put_super+0x3b3/0x3c0
Call Trace:
<TASK>
generic_shutdown_super+0x7e/0x190
kill_block_super+0x1a/0x40
kill_f2fs_super+0x9d/0x190
deactivate_locked_super+0x30/0xb0
cleanup_mnt+0xba/0x150
task_work_run+0x5c/0xa0
exit_to_user_mode_loop+0xb7/0xc0
do_syscall_64+0x1ae/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
---[ end trace 0000000000000000 ]---
It appears that sometimes it is possible that f2fs_put_super() is called before
all node page reads are completed.
Adding a call to f2fs_wait_on_all_pages() for F2FS_RD_NODE fixes the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: adreno: fix deferencing ifpc_reglist when not declared
On plaforms with an a7xx GPU not supporting IFPC, the ifpc_reglist
if still deferenced in a7xx_patch_pwrup_reglist() which causes
a kernel crash:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
pc : a6xx_hw_init+0x155c/0x1e4c [msm]
lr : a6xx_hw_init+0x9a8/0x1e4c [msm]
...
Call trace:
a6xx_hw_init+0x155c/0x1e4c [msm] (P)
msm_gpu_hw_init+0x58/0x88 [msm]
adreno_load_gpu+0x94/0x1fc [msm]
msm_open+0xe4/0xf4 [msm]
drm_file_alloc+0x1a0/0x2e4 [drm]
drm_client_init+0x7c/0x104 [drm]
drm_fbdev_client_setup+0x94/0xcf0 [drm_client_lib]
drm_client_setup+0xb4/0xd8 [drm_client_lib]
msm_drm_kms_post_init+0x2c/0x3c [msm]
msm_drm_init+0x1a4/0x228 [msm]
msm_drm_bind+0x30/0x3c [msm]
...
Check the validity of ifpc_reglist before deferencing the table
to setup the register values.
Patchwork: https://patchwork.freedesktop.org/patch/688944/ |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix NULL dereference on root when tracing inode eviction
When evicting an inode the first thing we do is to setup tracing for it,
which implies fetching the root's id. But in btrfs_evict_inode() the
root might be NULL, as implied in the next check that we do in
btrfs_evict_inode().
Hence, we either should set the ->root_objectid to 0 in case the root is
NULL, or we move tracing setup after checking that the root is not
NULL. Setting the rootid to 0 at least gives us the possibility to trace
this call even in the case when the root is NULL, so that's the solution
taken here. |
