| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: Loongson64: DTS: Really fix PCIe port nodes for ls7a
Fix the dtc warnings:
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider
arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
And a runtime warning introduced in commit 045b14ca5c36 ("of: WARN on
deprecated #address-cells/#size-cells handling"):
WARNING: CPU: 0 PID: 1 at drivers/of/base.c:106 of_bus_n_addr_cells+0x9c/0xe0
Missing '#address-cells' in /bus@10000000/pci@1a000000/pci_bridge@9,0
The fix is similar to commit d89a415ff8d5 ("MIPS: Loongson64: DTS: Fix PCIe
port nodes for ls7a"), which has fixed the issue for ls2k (despite its
subject mentions ls7a). |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: x86: Add adev NULL check to acpi_quirk_skip_serdev_enumeration()
acpi_dev_hid_match() does not check for adev == NULL, dereferencing
it unconditional.
Add a check for adev being NULL before calling acpi_dev_hid_match().
At the moment acpi_quirk_skip_serdev_enumeration() is never called with
a controller_parent without an ACPI companion, but better safe than sorry. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix use-after-free when COWing tree bock and tracing is enabled
When a COWing a tree block, at btrfs_cow_block(), and we have the
tracepoint trace_btrfs_cow_block() enabled and preemption is also enabled
(CONFIG_PREEMPT=y), we can trigger a use-after-free in the COWed extent
buffer while inside the tracepoint code. This is because in some paths
that call btrfs_cow_block(), such as btrfs_search_slot(), we are holding
the last reference on the extent buffer @buf so btrfs_force_cow_block()
drops the last reference on the @buf extent buffer when it calls
free_extent_buffer_stale(buf), which schedules the release of the extent
buffer with RCU. This means that if we are on a kernel with preemption,
the current task may be preempted before calling trace_btrfs_cow_block()
and the extent buffer already released by the time trace_btrfs_cow_block()
is called, resulting in a use-after-free.
Fix this by moving the trace_btrfs_cow_block() from btrfs_cow_block() to
btrfs_force_cow_block() before the COWed extent buffer is freed.
This also has a side effect of invoking the tracepoint in the tree defrag
code, at defrag.c:btrfs_realloc_node(), since btrfs_force_cow_block() is
called there, but this is fine and it was actually missing there. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp_mst: Fix MST sideband message body length check
Fix the MST sideband message body length check, which must be at least 1
byte accounting for the message body CRC (aka message data CRC) at the
end of the message.
This fixes a case where an MST branch device returns a header with a
correct header CRC (indicating a correctly received body length), with
the body length being incorrectly set to 0. This will later lead to a
memory corruption in drm_dp_sideband_append_payload() and the following
errors in dmesg:
UBSAN: array-index-out-of-bounds in drivers/gpu/drm/display/drm_dp_mst_topology.c:786:25
index -1 is out of range for type 'u8 [48]'
Call Trace:
drm_dp_sideband_append_payload+0x33d/0x350 [drm_display_helper]
drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper]
drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper]
memcpy: detected field-spanning write (size 18446744073709551615) of single field "&msg->msg[msg->curlen]" at drivers/gpu/drm/display/drm_dp_mst_topology.c:791 (size 256)
Call Trace:
drm_dp_sideband_append_payload+0x324/0x350 [drm_display_helper]
drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper]
drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper] |
| In the Linux kernel, the following vulnerability has been resolved:
af_packet: avoid erroring out after sock_init_data() in packet_create()
After sock_init_data() the allocated sk object is attached to the provided
sock object. On error, packet_create() frees the sk object leaving the
dangling pointer in the sock object on return. Some other code may try
to use this pointer and cause use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: do not leave dangling sk pointer on error in l2cap_sock_create()
bt_sock_alloc() allocates the sk object and attaches it to the provided
sock object. On error l2cap_sock_alloc() frees the sk object, but the
dangling pointer is still attached to the sock object, which may create
use-after-free in other code. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: avoid leaving dangling sk pointer in rfcomm_sock_alloc()
bt_sock_alloc() attaches allocated sk object to the provided sock object.
If rfcomm_dlc_alloc() fails, we release the sk object, but leave the
dangling pointer in the sock object, which may cause use-after-free.
Fix this by swapping calls to bt_sock_alloc() and rfcomm_dlc_alloc(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: af_can: do not leave a dangling sk pointer in can_create()
On error can_create() frees the allocated sk object, but sock_init_data()
has already attached it to the provided sock object. This will leave a
dangling sk pointer in the sock object and may cause use-after-free later. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: add a check to prevent array-index-out-of-bounds in dbAdjTree
When the value of lp is 0 at the beginning of the for loop, it will
become negative in the next assignment and we should bail out. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw()
This patch fixes a NULL pointer dereference bug in brcmfmac that occurs
when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs
are sent from the pkt queue.
The problem is the number of entries in the pre-allocated sgtable, it is
nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) >> 4 + 1.
Given the default [rt]xglom_size=32 it's actually 35 which is too small.
Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB
is added for each original SKB if tailroom isn't enough to hold tail_pad.
At least one sg entry is needed for each SKB. So, eventually the "skb_queue_walk loop"
in brcmf_sdiod_sglist_rw may run out of sg entries. This makes sg_next return
NULL and this causes the oops.
The patch sets nents to max(rxglom_size, txglom_size) * 2 to be able handle
the worst-case.
Btw. this requires only 64-35=29 * 16 (or 20 if CONFIG_NEED_SG_DMA_LENGTH) = 464
additional bytes of memory. |
| In the Linux kernel, the following vulnerability has been resolved:
leds: class: Protect brightness_show() with led_cdev->led_access mutex
There is NULL pointer issue observed if from Process A where hid device
being added which results in adding a led_cdev addition and later a
another call to access of led_cdev attribute from Process B can result
in NULL pointer issue.
Use mutex led_cdev->led_access to protect access to led->cdev and its
attribute inside brightness_show() and max_brightness_show() and also
update the comment for mutex that it should be used to protect the led
class device fields.
Process A Process B
kthread+0x114
worker_thread+0x244
process_scheduled_works+0x248
uhid_device_add_worker+0x24
hid_add_device+0x120
device_add+0x268
bus_probe_device+0x94
device_initial_probe+0x14
__device_attach+0xfc
bus_for_each_drv+0x10c
__device_attach_driver+0x14c
driver_probe_device+0x3c
__driver_probe_device+0xa0
really_probe+0x190
hid_device_probe+0x130
ps_probe+0x990
ps_led_register+0x94
devm_led_classdev_register_ext+0x58
led_classdev_register_ext+0x1f8
device_create_with_groups+0x48
device_create_groups_vargs+0xc8
device_add+0x244
kobject_uevent+0x14
kobject_uevent_env[jt]+0x224
mutex_unlock[jt]+0xc4
__mutex_unlock_slowpath+0xd4
wake_up_q+0x70
try_to_wake_up[jt]+0x48c
preempt_schedule_common+0x28
__schedule+0x628
__switch_to+0x174
el0t_64_sync+0x1a8/0x1ac
el0t_64_sync_handler+0x68/0xbc
el0_svc+0x38/0x68
do_el0_svc+0x1c/0x28
el0_svc_common+0x80/0xe0
invoke_syscall+0x58/0x114
__arm64_sys_read+0x1c/0x2c
ksys_read+0x78/0xe8
vfs_read+0x1e0/0x2c8
kernfs_fop_read_iter+0x68/0x1b4
seq_read_iter+0x158/0x4ec
kernfs_seq_show+0x44/0x54
sysfs_kf_seq_show+0xb4/0x130
dev_attr_show+0x38/0x74
brightness_show+0x20/0x4c
dualshock4_led_get_brightness+0xc/0x74
[ 3313.874295][ T4013] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060
[ 3313.874301][ T4013] Mem abort info:
[ 3313.874303][ T4013] ESR = 0x0000000096000006
[ 3313.874305][ T4013] EC = 0x25: DABT (current EL), IL = 32 bits
[ 3313.874307][ T4013] SET = 0, FnV = 0
[ 3313.874309][ T4013] EA = 0, S1PTW = 0
[ 3313.874311][ T4013] FSC = 0x06: level 2 translation fault
[ 3313.874313][ T4013] Data abort info:
[ 3313.874314][ T4013] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
[ 3313.874316][ T4013] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 3313.874318][ T4013] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 3313.874320][ T4013] user pgtable: 4k pages, 39-bit VAs, pgdp=00000008f2b0a000
..
[ 3313.874332][ T4013] Dumping ftrace buffer:
[ 3313.874334][ T4013] (ftrace buffer empty)
..
..
[ dd3313.874639][ T4013] CPU: 6 PID: 4013 Comm: InputReader
[ 3313.874648][ T4013] pc : dualshock4_led_get_brightness+0xc/0x74
[ 3313.874653][ T4013] lr : led_update_brightness+0x38/0x60
[ 3313.874656][ T4013] sp : ffffffc0b910bbd0
..
..
[ 3313.874685][ T4013] Call trace:
[ 3313.874687][ T4013] dualshock4_led_get_brightness+0xc/0x74
[ 3313.874690][ T4013] brightness_show+0x20/0x4c
[ 3313.874692][ T4013] dev_attr_show+0x38/0x74
[ 3313.874696][ T4013] sysfs_kf_seq_show+0xb4/0x130
[ 3313.874700][ T4013] kernfs_seq_show+0x44/0x54
[ 3313.874703][ T4013] seq_read_iter+0x158/0x4ec
[ 3313.874705][ T4013] kernfs_fop_read_iter+0x68/0x1b4
[ 3313.874708][ T4013] vfs_read+0x1e0/0x2c8
[ 3313.874711][ T4013] ksys_read+0x78/0xe8
[ 3313.874714][ T4013] __arm64_sys_read+0x1c/0x2c
[ 3313.874718][ T4013] invoke_syscall+0x58/0x114
[ 3313.874721][ T4013] el0_svc_common+0x80/0xe0
[ 3313.874724][ T4013] do_el0_svc+0x1c/0x28
[ 3313.874727][ T4013] el0_svc+0x38/0x68
[ 3313.874730][ T4013] el0t_64_sync_handler+0x68/0xbc
[ 3313.874732][ T4013] el0t_64_sync+0x1a8/0x1ac |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: Filter invalid inodes with missing lookup function
Add a check to the ovl_dentry_weird() function to prevent the
processing of directory inodes that lack the lookup function.
This is important because such inodes can cause errors in overlayfs
when passed to the lowerstack. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/xen: don't do PV iret hypercall through hypercall page
Instead of jumping to the Xen hypercall page for doing the iret
hypercall, directly code the required sequence in xen-asm.S.
This is done in preparation of no longer using hypercall page at all,
as it has shown to cause problems with speculation mitigations.
This is part of XSA-466 / CVE-2024-53241. |
| In the Linux kernel, the following vulnerability has been resolved:
um: ubd: Do not use drvdata in release
The drvdata is not available in release. Let's just use container_of()
to get the ubd instance. Otherwise, removing a ubd device will result
in a crash:
RIP: 0033:blk_mq_free_tag_set+0x1f/0xba
RSP: 00000000e2083bf0 EFLAGS: 00010246
RAX: 000000006021463a RBX: 0000000000000348 RCX: 0000000062604d00
RDX: 0000000004208060 RSI: 00000000605241a0 RDI: 0000000000000348
RBP: 00000000e2083c10 R08: 0000000062414010 R09: 00000000601603f7
R10: 000000000000133a R11: 000000006038c4bd R12: 0000000000000000
R13: 0000000060213a5c R14: 0000000062405d20 R15: 00000000604f7aa0
Kernel panic - not syncing: Segfault with no mm
CPU: 0 PID: 17 Comm: kworker/0:1 Not tainted 6.8.0-rc3-00107-gba3f67c11638 #1
Workqueue: events mc_work_proc
Stack:
00000000 604f7ef0 62c5d000 62405d20
e2083c30 6002c776 6002c755 600e47ff
e2083c60 6025ffe3 04208060 603d36e0
Call Trace:
[<6002c776>] ubd_device_release+0x21/0x55
[<6002c755>] ? ubd_device_release+0x0/0x55
[<600e47ff>] ? kfree+0x0/0x100
[<6025ffe3>] device_release+0x70/0xba
[<60381d6a>] kobject_put+0xb5/0xe2
[<6026027b>] put_device+0x19/0x1c
[<6026a036>] platform_device_put+0x26/0x29
[<6026ac5a>] platform_device_unregister+0x2c/0x2e
[<6002c52e>] ubd_remove+0xb8/0xd6
[<6002bb74>] ? mconsole_reply+0x0/0x50
[<6002b926>] mconsole_remove+0x160/0x1cc
[<6002bbbc>] ? mconsole_reply+0x48/0x50
[<6003379c>] ? um_set_signals+0x3b/0x43
[<60061c55>] ? update_min_vruntime+0x14/0x70
[<6006251f>] ? dequeue_task_fair+0x164/0x235
[<600620aa>] ? update_cfs_group+0x0/0x40
[<603a0e77>] ? __schedule+0x0/0x3ed
[<60033761>] ? um_set_signals+0x0/0x43
[<6002af6a>] mc_work_proc+0x77/0x91
[<600520b4>] process_scheduled_works+0x1af/0x2c3
[<6004ede3>] ? assign_work+0x0/0x58
[<600527a1>] worker_thread+0x2f7/0x37a
[<6004ee3b>] ? set_pf_worker+0x0/0x64
[<6005765d>] ? arch_local_irq_save+0x0/0x2d
[<60058e07>] ? kthread_exit+0x0/0x3a
[<600524aa>] ? worker_thread+0x0/0x37a
[<60058f9f>] kthread+0x130/0x135
[<6002068e>] new_thread_handler+0x85/0xb6 |
| In the Linux kernel, the following vulnerability has been resolved:
um: net: Do not use drvdata in release
The drvdata is not available in release. Let's just use container_of()
to get the uml_net instance. Otherwise, removing a network device will
result in a crash:
RIP: 0033:net_device_release+0x10/0x6f
RSP: 00000000e20c7c40 EFLAGS: 00010206
RAX: 000000006002e4e7 RBX: 00000000600f1baf RCX: 00000000624074e0
RDX: 0000000062778000 RSI: 0000000060551c80 RDI: 00000000627af028
RBP: 00000000e20c7c50 R08: 00000000603ad594 R09: 00000000e20c7b70
R10: 000000000000135a R11: 00000000603ad422 R12: 0000000000000000
R13: 0000000062c7af00 R14: 0000000062406d60 R15: 00000000627700b6
Kernel panic - not syncing: Segfault with no mm
CPU: 0 UID: 0 PID: 29 Comm: kworker/0:2 Not tainted 6.12.0-rc6-g59b723cd2adb #1
Workqueue: events mc_work_proc
Stack:
627af028 62c7af00 e20c7c80 60276fcd
62778000 603f5820 627af028 00000000
e20c7cb0 603a2bcd 627af000 62770010
Call Trace:
[<60276fcd>] device_release+0x70/0xba
[<603a2bcd>] kobject_put+0xba/0xe7
[<60277265>] put_device+0x19/0x1c
[<60281266>] platform_device_put+0x26/0x29
[<60281e5f>] platform_device_unregister+0x2c/0x2e
[<6002ec9c>] net_remove+0x63/0x69
[<60031316>] ? mconsole_reply+0x0/0x50
[<600310c8>] mconsole_remove+0x160/0x1cc
[<60087d40>] ? __remove_hrtimer+0x38/0x74
[<60087ff8>] ? hrtimer_try_to_cancel+0x8c/0x98
[<6006b3cf>] ? dl_server_stop+0x3f/0x48
[<6006b390>] ? dl_server_stop+0x0/0x48
[<600672e8>] ? dequeue_entities+0x327/0x390
[<60038fa6>] ? um_set_signals+0x0/0x43
[<6003070c>] mc_work_proc+0x77/0x91
[<60057664>] process_scheduled_works+0x1b3/0x2dd
[<60055f32>] ? assign_work+0x0/0x58
[<60057f0a>] worker_thread+0x1e9/0x293
[<6005406f>] ? set_pf_worker+0x0/0x64
[<6005d65d>] ? arch_local_irq_save+0x0/0x2d
[<6005d748>] ? kthread_exit+0x0/0x3a
[<60057d21>] ? worker_thread+0x0/0x293
[<6005dbf1>] kthread+0x126/0x12b
[<600219c5>] new_thread_handler+0x85/0xb6 |
| In the Linux kernel, the following vulnerability has been resolved:
um: vector: Do not use drvdata in release
The drvdata is not available in release. Let's just use container_of()
to get the vector_device instance. Otherwise, removing a vector device
will result in a crash:
RIP: 0033:vector_device_release+0xf/0x50
RSP: 00000000e187bc40 EFLAGS: 00010202
RAX: 0000000060028f61 RBX: 00000000600f1baf RCX: 00000000620074e0
RDX: 000000006220b9c0 RSI: 0000000060551c80 RDI: 0000000000000000
RBP: 00000000e187bc50 R08: 00000000603ad594 R09: 00000000e187bb70
R10: 000000000000135a R11: 00000000603ad422 R12: 00000000623ae028
R13: 000000006287a200 R14: 0000000062006d30 R15: 00000000623700b6
Kernel panic - not syncing: Segfault with no mm
CPU: 0 UID: 0 PID: 16 Comm: kworker/0:1 Not tainted 6.12.0-rc6-g59b723cd2adb #1
Workqueue: events mc_work_proc
Stack:
60028f61 623ae028 e187bc80 60276fcd
6220b9c0 603f5820 623ae028 00000000
e187bcb0 603a2bcd 623ae000 62370010
Call Trace:
[<60028f61>] ? vector_device_release+0x0/0x50
[<60276fcd>] device_release+0x70/0xba
[<603a2bcd>] kobject_put+0xba/0xe7
[<60277265>] put_device+0x19/0x1c
[<60281266>] platform_device_put+0x26/0x29
[<60281e5f>] platform_device_unregister+0x2c/0x2e
[<60029422>] vector_remove+0x52/0x58
[<60031316>] ? mconsole_reply+0x0/0x50
[<600310c8>] mconsole_remove+0x160/0x1cc
[<603b19f4>] ? strlen+0x0/0x15
[<60066611>] ? __dequeue_entity+0x1a9/0x206
[<600666a7>] ? set_next_entity+0x39/0x63
[<6006666e>] ? set_next_entity+0x0/0x63
[<60038fa6>] ? um_set_signals+0x0/0x43
[<6003070c>] mc_work_proc+0x77/0x91
[<60057664>] process_scheduled_works+0x1b3/0x2dd
[<60055f32>] ? assign_work+0x0/0x58
[<60057f0a>] worker_thread+0x1e9/0x293
[<6005406f>] ? set_pf_worker+0x0/0x64
[<6005d65d>] ? arch_local_irq_save+0x0/0x2d
[<6005d748>] ? kthread_exit+0x0/0x3a
[<60057d21>] ? worker_thread+0x0/0x293
[<6005dbf1>] kthread+0x126/0x12b
[<600219c5>] new_thread_handler+0x85/0xb6 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: Add sanity NULL check for the default mmap fault handler
A driver might allow the mmap access before initializing its
runtime->dma_area properly. Add a proper NULL check before passing to
virt_to_page() for avoiding a panic. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: make sure cache entry active before cache_show
The function `c_show` was called with protection from RCU. This only
ensures that `cp` will not be freed. Therefore, the reference count for
`cp` can drop to zero, which will trigger a refcount use-after-free
warning when `cache_get` is called. To resolve this issue, use
`cache_get_rcu` to ensure that `cp` remains active.
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 7 PID: 822 at lib/refcount.c:25
refcount_warn_saturate+0xb1/0x120
CPU: 7 UID: 0 PID: 822 Comm: cat Not tainted 6.12.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
RIP: 0010:refcount_warn_saturate+0xb1/0x120
Call Trace:
<TASK>
c_show+0x2fc/0x380 [sunrpc]
seq_read_iter+0x589/0x770
seq_read+0x1e5/0x270
proc_reg_read+0xe1/0x140
vfs_read+0x125/0x530
ksys_read+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix out of bounds reads when finding clock sources
The current USB-audio driver code doesn't check bLength of each
descriptor at traversing for clock descriptors. That is, when a
device provides a bogus descriptor with a shorter bLength, the driver
might hit out-of-bounds reads.
For addressing it, this patch adds sanity checks to the validator
functions for the clock descriptor traversal. When the descriptor
length is shorter than expected, it's skipped in the loop.
For the clock source and clock multiplier descriptors, we can just
check bLength against the sizeof() of each descriptor type.
OTOH, the clock selector descriptor of UAC2 and UAC3 has an array
of bNrInPins elements and two more fields at its tail, hence those
have to be checked in addition to the sizeof() check. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/task_stack: fix object_is_on_stack() for KASAN tagged pointers
When CONFIG_KASAN_SW_TAGS and CONFIG_KASAN_STACK are enabled, the
object_is_on_stack() function may produce incorrect results due to the
presence of tags in the obj pointer, while the stack pointer does not have
tags. This discrepancy can lead to incorrect stack object detection and
subsequently trigger warnings if CONFIG_DEBUG_OBJECTS is also enabled.
Example of the warning:
ODEBUG: object 3eff800082ea7bb0 is NOT on stack ffff800082ea0000, but annotated.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at lib/debugobjects.c:557 __debug_object_init+0x330/0x364
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc5 #4
Hardware name: linux,dummy-virt (DT)
pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __debug_object_init+0x330/0x364
lr : __debug_object_init+0x330/0x364
sp : ffff800082ea7b40
x29: ffff800082ea7b40 x28: 98ff0000c0164518 x27: 98ff0000c0164534
x26: ffff800082d93ec8 x25: 0000000000000001 x24: 1cff0000c00172a0
x23: 0000000000000000 x22: ffff800082d93ed0 x21: ffff800081a24418
x20: 3eff800082ea7bb0 x19: efff800000000000 x18: 0000000000000000
x17: 00000000000000ff x16: 0000000000000047 x15: 206b63617473206e
x14: 0000000000000018 x13: ffff800082ea7780 x12: 0ffff800082ea78e
x11: 0ffff800082ea790 x10: 0ffff800082ea79d x9 : 34d77febe173e800
x8 : 34d77febe173e800 x7 : 0000000000000001 x6 : 0000000000000001
x5 : feff800082ea74b8 x4 : ffff800082870a90 x3 : ffff80008018d3c4
x2 : 0000000000000001 x1 : ffff800082858810 x0 : 0000000000000050
Call trace:
__debug_object_init+0x330/0x364
debug_object_init_on_stack+0x30/0x3c
schedule_hrtimeout_range_clock+0xac/0x26c
schedule_hrtimeout+0x1c/0x30
wait_task_inactive+0x1d4/0x25c
kthread_bind_mask+0x28/0x98
init_rescuer+0x1e8/0x280
workqueue_init+0x1a0/0x3cc
kernel_init_freeable+0x118/0x200
kernel_init+0x28/0x1f0
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
ODEBUG: object 3eff800082ea7bb0 is NOT on stack ffff800082ea0000, but annotated.
------------[ cut here ]------------ |
