| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| VMware Aria Operations contains a stored cross-site scripting vulnerability. A malicious actor with privileges to create custom benchmarks may be able to inject script to perform administrative actions in VMware Aria Operations.
To remediate CVE-2026-22720, apply the patches listed in the 'Fixed Version' column of the 'Response Matrix' of VMSA-2026-0001 https://support.broadcom.com/web/ecx/support-content-notification/-/external/content/SecurityAdvisories/0/36947https:// . |
| The User Registration & Membership plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 5.1.2. This is due to incorrect authentication in the 'register_member' function. This makes it possible for unauthenticated attackers to log in a newly registered user on the site who has the 'urm_user_just_created' user meta set. |
| The Fluent Forms Pro Add On Pack plugin for WordPress is vulnerable to Insufficient Verification of Data Authenticity in all versions up to, and including, 6.1.17. This is due to the PayPal IPN (Instant Payment Notification) verification being disabled by default (`disable_ipn_verification` defaults to `'yes'` in `PayPalSettings.php`). This makes it possible for unauthenticated attackers to send forged PayPal IPN notifications to the publicly accessible IPN endpoint, marking unpaid form submissions as "paid" and triggering post-payment automation (emails, access grants, digital product delivery). |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid mapping wrong physical block for swapfile
Xiaolong Guo reported a f2fs bug in bugzilla [1]
[1] https://bugzilla.kernel.org/show_bug.cgi?id=220951
Quoted:
"When using stress-ng's swap stress test on F2FS filesystem with kernel 6.6+,
the system experiences data corruption leading to either:
1 dm-verity corruption errors and device reboot
2 F2FS node corruption errors and boot hangs
The issue occurs specifically when:
1 Using F2FS filesystem (ext4 is unaffected)
2 Swapfile size is less than F2FS section size (2MB)
3 Swapfile has fragmented physical layout (multiple non-contiguous extents)
4 Kernel version is 6.6+ (6.1 is unaffected)
The root cause is in check_swap_activate() function in fs/f2fs/data.c. When the
first extent of a small swapfile (< 2MB) is not aligned to section boundaries,
the function incorrectly treats it as the last extent, failing to map
subsequent extents. This results in incorrect swap_extent creation where only
the first extent is mapped, causing subsequent swap writes to overwrite wrong
physical locations (other files' data).
Steps to Reproduce
1 Setup a device with F2FS-formatted userdata partition
2 Compile stress-ng from https://github.com/ColinIanKing/stress-ng
3 Run swap stress test: (Android devices)
adb shell "cd /data/stressng; ./stress-ng-64 --metrics-brief --timeout 60
--swap 0"
Log:
1 Ftrace shows in kernel 6.6, only first extent is mapped during second
f2fs_map_blocks call in check_swap_activate():
stress-ng-swap-8990: f2fs_map_blocks: ino=11002, file offset=0, start
blkaddr=0x43143, len=0x1
(Only 4KB mapped, not the full swapfile)
2 in kernel 6.1, both extents are correctly mapped:
stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=0, start
blkaddr=0x13cd4, len=0x1
stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=1, start
blkaddr=0x60c84b, len=0xff
The problematic code is in check_swap_activate():
if ((pblock - SM_I(sbi)->main_blkaddr) % blks_per_sec ||
nr_pblocks % blks_per_sec ||
!f2fs_valid_pinned_area(sbi, pblock)) {
bool last_extent = false;
not_aligned++;
nr_pblocks = roundup(nr_pblocks, blks_per_sec);
if (cur_lblock + nr_pblocks > sis->max)
nr_pblocks -= blks_per_sec;
/* this extent is last one */
if (!nr_pblocks) {
nr_pblocks = last_lblock - cur_lblock;
last_extent = true;
}
ret = f2fs_migrate_blocks(inode, cur_lblock, nr_pblocks);
if (ret) {
if (ret == -ENOENT)
ret = -EINVAL;
goto out;
}
if (!last_extent)
goto retry;
}
When the first extent is unaligned and roundup(nr_pblocks, blks_per_sec)
exceeds sis->max, we subtract blks_per_sec resulting in nr_pblocks = 0. The
code then incorrectly assumes this is the last extent, sets nr_pblocks =
last_lblock - cur_lblock (entire swapfile), and performs migration. After
migration, it doesn't retry mapping, so subsequent extents are never processed.
"
In order to fix this issue, we need to lookup block mapping info after
we migrate all blocks in the tail of swapfile. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid UAF in f2fs_write_end_io()
As syzbot reported an use-after-free issue in f2fs_write_end_io().
It is caused by below race condition:
loop device umount
- worker_thread
- loop_process_work
- do_req_filebacked
- lo_rw_aio
- lo_rw_aio_complete
- blk_mq_end_request
- blk_update_request
- f2fs_write_end_io
- dec_page_count
- folio_end_writeback
- kill_f2fs_super
- kill_block_super
- f2fs_put_super
: free(sbi)
: get_pages(, F2FS_WB_CP_DATA)
accessed sbi which is freed
In kill_f2fs_super(), we will drop all page caches of f2fs inodes before
call free(sbi), it guarantee that all folios should end its writeback, so
it should be safe to access sbi before last folio_end_writeback().
Let's relocate ckpt thread wakeup flow before folio_end_writeback() to
resolve this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix out-of-bounds access in sysfs attribute read/write
Some f2fs sysfs attributes suffer from out-of-bounds memory access and
incorrect handling of integer values whose size is not 4 bytes.
For example:
vm:~# echo 65537 > /sys/fs/f2fs/vde/carve_out
vm:~# cat /sys/fs/f2fs/vde/carve_out
65537
vm:~# echo 4294967297 > /sys/fs/f2fs/vde/atgc_age_threshold
vm:~# cat /sys/fs/f2fs/vde/atgc_age_threshold
1
carve_out maps to {struct f2fs_sb_info}->carve_out, which is a 8-bit
integer. However, the sysfs interface allows setting it to a value
larger than 255, resulting in an out-of-range update.
atgc_age_threshold maps to {struct atgc_management}->age_threshold,
which is a 64-bit integer, but its sysfs interface cannot correctly set
values larger than UINT_MAX.
The root causes are:
1. __sbi_store() treats all default values as unsigned int, which
prevents updating integers larger than 4 bytes and causes out-of-bounds
writes for integers smaller than 4 bytes.
2. f2fs_sbi_show() also assumes all default values are unsigned int,
leading to out-of-bounds reads and incorrect access to integers larger
than 4 bytes.
This patch introduces {struct f2fs_attr}->size to record the actual size
of the integer associated with each sysfs attribute. With this
information, sysfs read and write operations can correctly access and
update values according to their real data size, avoiding memory
corruption and truncation. |
| Payment Orchestrator Service Elevation of Privilege Vulnerability |
| Heap buffer overflow in the Audio/Video: Playback component in Firefox for Android. This vulnerability was fixed in Firefox 148.0.2. |
| Memory safety bugs present in Firefox 148.0.2. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 148.0.2. |
| In the Linux kernel, the following vulnerability has been resolved:
espintcp: Fix race condition in espintcp_close()
This issue was discovered during a code audit.
After cancel_work_sync() is called from espintcp_close(),
espintcp_tx_work() can still be scheduled from paths such as
the Delayed ACK handler or ksoftirqd.
As a result, the espintcp_tx_work() worker may dereference a
freed espintcp ctx or sk.
The following is a simple race scenario:
cpu0 cpu1
espintcp_close()
cancel_work_sync(&ctx->work);
espintcp_write_space()
schedule_work(&ctx->work);
To prevent this race condition, cancel_work_sync() is
replaced with disable_work_sync(). |
| Path Traversal in Clasp impacting versions < 3.2.0 allows a remote attacker to perform remote code execution via a malicious Google Apps Script project containing specially crafted filenames with directory traversal sequences. |
| OpenClaw before 2026.3.22 performs cite expansion before completing channel and DM authorization checks, allowing cite work and content handling prior to final auth decisions. Attackers can exploit this timing vulnerability to access or manipulate content before proper authorization validation occurs. |
| OpenClaw before 2026.3.22 contains a privilege escalation vulnerability in the Control UI that allows unauthenticated sessions to retain self-declared privileged scopes without device identity verification. Attackers can exploit the device-less allow path in the trusted-proxy mechanism to maintain elevated permissions by declaring arbitrary scopes, bypassing device identity requirements. |
| OpenClaw before 2026.3.22 contains a privilege escalation vulnerability in the device.pair.approve method that allows an operator.pairing approver to approve pending device requests with broader operator scopes than the approver actually holds. Attackers can exploit insufficient scope validation to escalate privileges to operator.admin and achieve remote code execution on the Node infrastructure. |
| ownDMS 4.7 contains an SQL injection vulnerability that allows unauthenticated attackers to execute arbitrary SQL queries by injecting malicious code through the IMG parameter. Attackers can send GET requests to pdfstream.php, imagestream.php, or anyfilestream.php with crafted SQL payloads in the IMG parameter to extract sensitive database information including version and database names. |
| A command injection vulnerability exists in mlflow/mlflow versions before v3.7.0, specifically in the `mlflow/sagemaker/__init__.py` file at lines 161-167. The vulnerability arises from the direct interpolation of user-supplied container image names into shell commands without proper sanitization, which are then executed using `os.system()`. This allows attackers to execute arbitrary commands by supplying malicious input through the `--container` parameter of the CLI. The issue affects environments where MLflow is used, including development setups, CI/CD pipelines, and cloud deployments. |
| LuCI is the OpenWrt Configuration Interface. Versions prior to both 24.10.5 and 25.12.0, contain a stored XSS vulnerability in the wireless scan modal, where SSID values from scan results are rendered as raw HTML without any sanitization. The wireless.js file in the luci-mod-network package passes SSIDs via a template literal to dom.append(), which processes them through innerHTML, allowing an attacker to craft a malicious SSID containing arbitrary HTML/JavaScript. Exploitation requires the user to actively open the wireless scan modal (e.g., to connect to a Wi-Fi access point or survey nearby channels), and only affects OpenWrt versions newer than 23.05/22.03 up to the patched releases (24.10.6 and 25.12.1). The issue has been fixed in version LuCI 26.072.65753~068150b. |
| An issue in the component /Controllers/RestController.php of DreamFactory Core v1.0.3 allows attackers to execute a directory traversal via an unsanitized URI path. |
| mcp-memory-service is an open-source memory backend for multi-agent systems. Prior to version 10.25.1, when the HTTP server is enabled (MCP_HTTP_ENABLED=true), the application configures FastAPI's CORSMiddleware with allow_origins=['*'], allow_credentials=True, allow_methods=["*"], and allow_headers=["*"]. The wildcard Access-Control-Allow-Origin: * header permits any website to read API responses cross-origin. When combined with anonymous access (MCP_ALLOW_ANONYMOUS_ACCESS=true) - the simplest way to get the HTTP dashboard working without OAuth - no credentials are needed, so any malicious website can silently read, modify, and delete all stored memories. This issue has been patched in version 10.25.1. |
| Socket.IO is an open source, real-time, bidirectional, event-based, communication framework. Prior to versions 3.3.5, 3.4.4, and 4.2.6, a specially crafted Socket.IO packet can make the server wait for a large number of binary attachments and buffer them, which can be exploited to make the server run out of memory. This issue has been patched in versions 3.3.5, 3.4.4, and 4.2.6. |
