| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities.
The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload.
Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable.
There are workarounds that address these vulnerabilities. |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities.
The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload.
Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable.
There are workarounds that address these vulnerabilities. |
| Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCuz95334. |
| Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc43709. |
| A vulnerability in the implementation of the PROFINET Discovery and Configuration Protocol (PN-DCP) for Cisco IOS 12.2 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper parsing of ingress PN-DCP Identify Request packets destined to an affected device. An attacker could exploit this vulnerability by sending a crafted PN-DCP Identify Request packet to an affected device and then continuing to send normal PN-DCP Identify Request packets to the device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. This vulnerability affects Cisco devices that are configured to process PROFINET messages. Beginning with Cisco IOS Software Release 12.2(52)SE, PROFINET is enabled by default on all the base switch module and expansion-unit Ethernet ports. Cisco Bug IDs: CSCuz47179. |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco IOS 15.0 through 15.6 and Cisco IOS XE 3.5 through 16.5 could allow an unauthenticated, remote attacker to cause high CPU utilization, traceback messages, or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to how an affected device processes certain IKEv2 packets. An attacker could exploit this vulnerability by sending specific IKEv2 packets to an affected device to be processed. A successful exploit could allow the attacker to cause high CPU utilization, traceback messages, or a reload of the affected device that leads to a DoS condition. This vulnerability affects Cisco devices that have the Internet Security Association and Key Management Protocol (ISAKMP) enabled. Although only IKEv2 packets can be used to trigger this vulnerability, devices that are running Cisco IOS Software or Cisco IOS XE Software are vulnerable when ISAKMP is enabled. A device does not need to be configured with any IKEv2-specific features to be vulnerable. Many features use IKEv2, including different types of VPNs such as the following: LAN-to-LAN VPN; Remote-access VPN, excluding SSL VPN; Dynamic Multipoint VPN (DMVPN); and FlexVPN. Cisco Bug IDs: CSCvc41277. |
| A vulnerability in the Virtual Private LAN Service (VPLS) code of Cisco IOS 15.0 through 15.4 for Cisco Catalyst 6800 Series Switches could allow an unauthenticated, adjacent attacker to cause a C6800-16P10G or C6800-16P10G-XL type line card to crash, resulting in a denial of service (DoS) condition. The vulnerability is due to a memory management issue in the affected software. An attacker could exploit this vulnerability by creating a large number of VPLS-generated MAC entries in the MAC address table of an affected device. A successful exploit could allow the attacker to cause a C6800-16P10G or C6800-16P10G-XL type line card to crash, resulting in a DoS condition. This vulnerability affects Cisco Catalyst 6800 Series Switches that are running a vulnerable release of Cisco IOS Software and have a Cisco C6800-16P10G or C6800-16P10G-XL line card in use with Supervisor Engine 6T. To be vulnerable, the device must also be configured with VPLS and the C6800-16P10G or C6800-16P10G-XL line card needs to be the core-facing MPLS interfaces. Cisco Bug IDs: CSCva61927. |
| The DHCP relay subsystem of Cisco IOS 12.2 through 15.6 and Cisco IOS XE Software contains a vulnerability that could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a buffer overflow condition in the DHCP relay subsystem of the affected software. An attacker could exploit this vulnerability by sending a crafted DHCP Version 4 (DHCPv4) packet to an affected system. A successful exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a DoS condition. Cisco Bug IDs: CSCsm45390, CSCuw77959. |
| A vulnerability in the implementation of Network Address Translation (NAT) functionality in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to the improper translation of H.323 messages that use the Registration, Admission, and Status (RAS) protocol and are sent to an affected device via IPv4 packets. An attacker could exploit this vulnerability by sending a crafted H.323 RAS packet through an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition. This vulnerability affects Cisco devices that are configured to use an application layer gateway with NAT (NAT ALG) for H.323 RAS messages. By default, a NAT ALG is enabled for H.323 RAS messages. Cisco Bug IDs: CSCvc57217. |
| Cisco IOS 12.2(15) and earlier allows remote attackers to cause a denial of service (refused VTY (virtual terminal) connections), via a crafted TCP connection to the Telnet or reverse Telnet port. |
| Cisco IOS XR, when configured for Multi Protocol Label Switching (MPLS) and running on Cisco CRS-1 routers, allows remote attackers to cause a denial of service (Modular Services Cards (MSC) crash or "MPLS packet handling problems") via certain MPLS packets, as identified by Cisco bug IDs (1) CSCsd15970 and (2) CSCsd55531. |
| Cisco IOS XR, when configured for Multi Protocol Label Switching (MPLS) and running on Cisco CRS-1 or Cisco 12000 series routers, allows remote attackers to cause a denial of service (Line card crash) via certain MPLS packets, as identified by Cisco bug ID CSCsc77475. |
| Cisco switches and routers running IOS 12.1 and earlier produce predictable TCP Initial Sequence Numbers (ISNs), which allows remote attackers to spoof or hijack TCP connections. |
| The TCL shell in Cisco IOS 12.2(14)S before 12.2(14)S16, 12.2(18)S before 12.2(18)S11, and certain other releases before 25 January 2006 does not perform Authentication, Authorization, and Accounting (AAA) command authorization checks, which may allow local users to execute IOS EXEC commands that were prohibited via the AAA configuration, aka Bug ID CSCeh73049. |
| The Cisco Optical Service Module (OSM) for the Catalyst 6500 and 7600 series running Cisco IOS 12.1(8)E through 12.1(13.4)E allows remote attackers to cause a denial of service (hang) via a malformed packet. |
| Unspecified vulnerability in the VLAN Trunking Protocol (VTP) feature in Cisco IOS 12.1(22)EA3 on Catalyst 2950T switches allows remote attackers to cause a denial of service (device reboot) via a crafted Subset-Advert message packet, a different issue than CVE-2006-4774, CVE-2006-4775, and CVE-2006-4776. |
| The design of the Hot Standby Routing Protocol (HSRP), as implemented on Cisco IOS 12.1, when using IRPAS, allows remote attackers to cause a denial of service (CPU consumption) via a router with the same IP address as the interface on which HSRP is running, which causes a loop. |
| The HTTP server in Cisco IOS 12.0 through 12.1 allows local users to cause a denial of service (crash and reload) via a URL containing a "?/" string. |
| Cisco IOS 9.1 and earlier does not properly handle extended IP access lists when the IP route cache is enabled and the "established" keyword is set, which could allow attackers to bypass filters. |
| Unspecified Cisco Catalyst Switches allow remote attackers to cause a denial of service (device crash) via an IP packet with the same source and destination IPs and ports, and with the SYN flag set (aka LanD). NOTE: the provenance of this issue is unknown; the details are obtained solely from the BID. |
