| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-48 and 7.1.2-22, an invalid connected-components:keep-top value could result in a heap buffer over-read when performing the connected components operation. This issue has been patched in versions 6.9.13-48 and 7.1.2-22. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: b43legacy: enforce bounds check on firmware key index in RX path
Same fix as b43: the firmware-controlled key index in b43legacy_rx()
can exceed dev->max_nr_keys. The existing B43legacy_WARN_ON is
non-enforcing in production builds, allowing an out-of-bounds read of
dev->key[].
Make the check enforcing by dropping the frame for invalid indices. |
| NVIDIA DALI contains a vulnerability in a component where an attacker could cause an improper index validation. A successful exploit of this vulnerability might lead to code execution, data tampering, denial of service, and information disclosure. |
| OP-TEE Trusted OS is the secure side implementation of OP-TEE project, a Trusted Execution Environment. Versions prior to 3.19.0, contain an Improper Validation of Array Index vulnerability. The function `cleanup_shm_refs()` is called by both `entry_invoke_command()` and `entry_open_session()`. The commands `OPTEE_MSG_CMD_OPEN_SESSION` and `OPTEE_MSG_CMD_INVOKE_COMMAND` can be executed from the normal world via an OP-TEE SMC. This function is not validating the `num_params` argument, which is only limited to `OPTEE_MSG_MAX_NUM_PARAMS` (127) in the function `get_cmd_buffer()`. Therefore, an attacker in the normal world can craft an SMC call that will cause out-of-bounds reading in `cleanup_shm_refs` and potentially freeing of fake-objects in the function `mobj_put()`. A normal-world attacker with permission to execute SMC instructions may exploit this flaw. Maintainers believe this problem permits local privilege escalation from the normal world to the secure world. Version 3.19.0 contains a fix for this issue. There are no known workarounds. |
| The DataRow.Decode function fails to properly validate field lengths. A malicious or compromised PostgreSQL server can send a DataRow message with a negative field length, causing a slice bounds out of range panic. |
| MapServer is a system for developing web-based GIS applications. From 6.4.0 to before 8.6.3, msSLDParseUserStyle always calls _SLDApplyRuleValues(psRule, psLayer, 1); for any <Rule> carrying <ElseFilter/> — it assumes msSLDParseRule added one class. When the rule has no symbolizer (a structurally valid SLD), msSLDParseRule adds zero, and _SLDApplyRuleValues ends up indexing _class[-1], resulting in a NULL pointer dereference. A 200-byte well-formed SLD via the WMS SLD_BODY= parameter is enough to trigger this, no auth required. This vulnerability is fixed in 8.6.3. |
| Memory corruption while using Strongbox due to missing bounds check. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: b43: enforce bounds check on firmware key index in b43_rx()
The firmware-controlled key index in b43_rx() can exceed the dev->key[]
array size (58 entries). The existing B43_WARN_ON is non-enforcing in
production builds, allowing an out-of-bounds read.
Make the B43_WARN_ON check enforcing by dropping the frame when the
firmware returns an invalid key index. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: reject negative CO-RE accessor indices in bpf_core_parse_spec()
CO-RE accessor strings are colon-separated indices that describe a path
from a root BTF type to a target field, e.g. "0:1:2" walks through
nested struct members. bpf_core_parse_spec() parses each component with
sscanf("%d"), so negative values like -1 are silently accepted. The
subsequent bounds checks (access_idx >= btf_vlen(t)) only guard the
upper bound and always pass for negative values because C integer
promotion converts the __u16 btf_vlen result to int, making the
comparison (int)(-1) >= (int)(N) false for any positive N.
When -1 reaches btf_member_bit_offset() it gets cast to u32 0xffffffff,
producing an out-of-bounds read far past the members array. A crafted
BPF program with a negative CO-RE accessor on any struct that exists in
vmlinux BTF (e.g. task_struct) crashes the kernel deterministically
during BPF_PROG_LOAD on any system with CONFIG_DEBUG_INFO_BTF=y
(default on major distributions). The bug is reachable with CAP_BPF:
BUG: unable to handle page fault for address: ffffed11818b6626
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 85 Comm: poc Not tainted 7.0.0-rc6 #18 PREEMPT(full)
RIP: 0010:bpf_core_parse_spec (tools/lib/bpf/relo_core.c:354)
RAX: 00000000ffffffff
Call Trace:
<TASK>
bpf_core_calc_relo_insn (tools/lib/bpf/relo_core.c:1321)
bpf_core_apply (kernel/bpf/btf.c:9507)
check_core_relo (kernel/bpf/verifier.c:19475)
bpf_check (kernel/bpf/verifier.c:26031)
bpf_prog_load (kernel/bpf/syscall.c:3089)
__sys_bpf (kernel/bpf/syscall.c:6228)
</TASK>
CO-RE accessor indices are inherently non-negative (struct member index,
array element index, or enumerator index), so reject them immediately
after parsing. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: s3c24xx: check the size of the SMBUS message before using it
The first byte of an i2c SMBUS message is the size, and it should be
verified to ensure that it is in the range of 0..I2C_SMBUS_BLOCK_MAX
before processing it.
This is the same logic that was added in commit a6e04f05ce0b ("i2c:
tegra: check msg length in SMBUS block read") to the i2c tegra driver. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: validate DFA start states are in bounds in unpack_pdb
Start states are read from untrusted data and used as indexes into the
DFA state tables. The aa_dfa_next() function call in unpack_pdb() will
access dfa->tables[YYTD_ID_BASE][start], and if the start state exceeds
the number of states in the DFA, this results in an out-of-bound read.
==================================================================
BUG: KASAN: slab-out-of-bounds in aa_dfa_next+0x2a1/0x360
Read of size 4 at addr ffff88811956fb90 by task su/1097
...
Reject policies with out-of-bounds start states during unpacking
to prevent the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: intel-dg: Fix accessing regions before setting nregions
The regions array is counted by nregions, but it's set only after
accessing it:
[] UBSAN: array-index-out-of-bounds in drivers/mtd/devices/mtd_intel_dg.c:750:15
[] index 0 is out of range for type '<unknown> [*]'
Fix it by also fixing an undesired behavior: the loop silently ignores
ENOMEM and continues setting the other entries. |
| For certain crafted inputs, a 'ed25519.PrivateKey' was created by casting malformed wire bytes, leading to a panic when used. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: bounds-check link_id in ieee80211_ml_reconfiguration
link_id is taken from the ML Reconfiguration element (control & 0x000f),
so it can be 0..15. link_removal_timeout[] has IEEE80211_MLD_MAX_NUM_LINKS
(15) elements, so index 15 is out-of-bounds. Skip subelements with
link_id >= IEEE80211_MLD_MAX_NUM_LINKS to avoid a stack out-of-bounds
write. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cdc_ncm: add ndpoffset to NDP16 nframes bounds check
cdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPE
entries fit within the skb. The first check correctly accounts for
ndpoffset:
if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len)
but the second check omits it:
if ((sizeof(struct usb_cdc_ncm_ndp16) +
ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len)
This validates the DPE array size against the total skb length as if
the NDP were at offset 0, rather than at ndpoffset. When the NDP is
placed near the end of the NTB (large wNdpIndex), the DPE entries can
extend past the skb data buffer even though the check passes.
cdc_ncm_rx_fixup() then reads out-of-bounds memory when iterating
the DPE array.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly. |
| Improper validation in Power Management Firmware (PMFW) may allow an attacker with privileges to pass malformed workload arguments when exporting table data from SMU to DRAM potentially resulting in a loss of confidentiality and/or availability. |
| Gitsign is a keyless Sigstore to signing tool for Git commits with your a GitHub / OIDC identity. From 0.4.0 to before 0.15.0, CertVerifier.Verify() in pkg/git/verifier.go unconditionally dereferences certs[0] after sd.GetCertificates() without checking the slice length. A CMS/PKCS7 signed message with an empty certificate set is a structurally valid DER payload; GetCertificates() returns an empty slice with no error, causing an immediate index-out-of-range panic. On the gitsign --verify code path (the GPG-compatible mode invoked by git verify-commit), the panic is silently recovered by internal/io/streams.go's Wrap() function, which returns nil instead of an error. main.go then exits with code 0, causing exit-code-only verification callers to interpret the failed verification as success. This vulnerability is fixed in 0.15.0. |
| vLLM is an inference and serving engine for large language models (LLMs). From 0.6.1 to before 0.20.0, there is a a Token Injection vulnerability in vLLM’s multimodal processing. Unauthenticated, text-only prompts that spell special tokens are interpreted as control. Image and video placeholder sequences supplied without matching data cause vLLM to index into empty grids during input-position computation, raising an unhandled IndexError and terminating the worker or degrading availability. Multimodal paths that rely on image_grid_thw/video_grid_thw are affected. This vulnerability is fixed in 0.20.0. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: use array_index_nospec with indices that come from guest
min and dest_id are guest-controlled indices. Using array_index_nospec()
after the bounds checks clamps these values to mitigate speculative execution
side-channels. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: upper bound check of tree index in dbAllocAG
When computing the tree index in dbAllocAG, we never check if we are
out of bounds realative to the size of the stree.
This could happen in a scenario where the filesystem metadata are
corrupted. |
