| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A path traversal vulnerability has been identified in certain router models. A remote, authenticated attacker could exploit this vulnerability to write files outside the intended directory, potentially affecting device integrity.
Refer to the 'Security Update for ASUS Router Firmware' section on the ASUS Security Advisory for more information. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in ThemeKraft BuddyForms allows Server Side Request Forgery, Relative Path Traversal.This issue affects BuddyForms: from n/a through 2.8.8. |
| KubeVirt is a virtual machine management add-on for Kubernetes. Prior to 1.5.3 and 1.6.1, a vulnerability was discovered that allows a VM to read arbitrary files from the virt-launcher pod's file system. This issue stems from improper symlink handling when mounting PVC disks into a VM. Specifically, if a malicious user has full or partial control over the contents of a PVC, they can create a symbolic link that points to a file within the virt-launcher pod's file system. Since libvirt can treat regular files as block devices, any file on the pod's file system that is symlinked in this way can be mounted into the VM and subsequently read. Although a security mechanism exists where VMs are executed as an unprivileged user with UID 107 inside the virt-launcher container, limiting the scope of accessible resources, this restriction is bypassed due to a second vulnerability. The latter causes the ownership of any file intended for mounting to be changed to the unprivileged user with UID 107 prior to mounting. As a result, an attacker can gain access to and read arbitrary files located within the virt-launcher pod's file system or on a mounted PVC from within the guest VM. This vulnerability is fixed in 1.5.3 and 1.6.1. |
| The Elliptic package 6.5.7 for Node.js, in its for ECDSA implementation, does not correctly verify valid signatures if the hash contains at least four leading 0 bytes and when the order of the elliptic curve's base point is smaller than the hash, because of an _truncateToN anomaly. This leads to valid signatures being rejected. Legitimate transactions or communications may be incorrectly flagged as invalid. |
| Traefik (pronounced traffic) is an HTTP reverse proxy and load balancer. In versions prior to 2.11.24, 3.3.6, and 3.4.0-rc2. There is a potential vulnerability in Traefik managing the requests using a PathPrefix, Path or PathRegex matcher. When Traefik is configured to route the requests to a backend using a matcher based on the path, if the URL contains a /../ in its path, it’s possible to target a backend, exposed using another router, by-passing the middlewares chain. This issue has been patched in versions 2.11.24, 3.3.6, and 3.4.0-rc2. A workaround involves adding a `PathRegexp` rule to the matcher to prevent matching a route with a `/../` in the path. |
| Astro is a web framework. Prior to version 5.15.8, a mismatch exists between how Astro normalizes request paths for routing/rendering and how the application’s middleware reads the path for validation checks. Astro internally applies decodeURI() to determine which route to render, while the middleware uses context.url.pathname without applying the same normalization (decodeURI). This discrepancy may allow attackers to reach protected routes using encoded path variants that pass routing but bypass validation checks. This issue has been patched in version 5.15.8. |
| Traefik (pronounced traffic) is an HTTP reverse proxy and load balancer. Prior to versions 2.11.25 and 3.4.1, there is a potential vulnerability in Traefik managing the requests using a PathPrefix, Path or PathRegex matcher. When Traefik is configured to route the requests to a backend using a matcher based on the path, if the URL contains a URL encoded string in its path, it’s possible to target a backend, exposed using another router, by-passing the middlewares chain. This issue has been patched in versions 2.11.25 and 3.4.1. |
| runc is a CLI tool for spawning and running containers according to the OCI specification. runc 1.1.13 and earlier, as well as 1.2.0-rc2 and earlier, can be tricked into creating empty files or directories in arbitrary locations in the host filesystem by sharing a volume between two containers and exploiting a race with `os.MkdirAll`. While this could be used to create empty files, existing files would not be truncated. An attacker must have the ability to start containers using some kind of custom volume configuration. Containers using user namespaces are still affected, but the scope of places an attacker can create inodes can be significantly reduced. Sufficiently strict LSM policies (SELinux/Apparmor) can also in principle block this attack -- we suspect the industry standard SELinux policy may restrict this attack's scope but the exact scope of protection hasn't been analysed. This is exploitable using runc directly as well as through Docker and Kubernetes. The issue is fixed in runc v1.1.14 and v1.2.0-rc3.
Some workarounds are available. Using user namespaces restricts this attack fairly significantly such that the attacker can only create inodes in directories that the remapped root user/group has write access to. Unless the root user is remapped to an actual
user on the host (such as with rootless containers that don't use `/etc/sub[ug]id`), this in practice means that an attacker would only be able to create inodes in world-writable directories. A strict enough SELinux or AppArmor policy could in principle also restrict the scope if a specific label is applied to the runc runtime, though neither the extent to which the standard existing policies block this attack nor what exact policies are needed to sufficiently restrict this attack have been thoroughly tested. |
| A vulnerability was identified in Chengdu Everbrite Network Technology BeikeShop up to 1.5.5. This vulnerability affects the function exportZip of the file /admin/file_manager/export. Such manipulation of the argument path leads to path traversal. The attack can be launched remotely. The exploit is publicly available and might be used. Upgrading to version 1.6.0 is able to resolve this issue. It is suggested to upgrade the affected component. |
| A vulnerability was found in Chengdu Everbrite Network Technology BeikeShop up to 1.5.5. Affected by this issue is the function destroyFiles of the file /admin/file_manager/files. The manipulation of the argument files results in path traversal. It is possible to launch the attack remotely. The exploit has been made public and could be used. Upgrading to version 1.6.0 can resolve this issue. You should upgrade the affected component. |
| A low privileged remote attacker can upload a new or overwrite an existing python script by using a path traversal of the target filename in php resulting in a remote code execution. |
| A vulnerability was determined in liweiyi ChestnutCMS up to 1.5.8. This vulnerability affects the function resourceDownload of the file /dev-api/common/download. Executing manipulation of the argument path can lead to path traversal. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. |
| A vulnerability has been found in harry0703 MoneyPrinterTurbo up to 1.2.6. The impacted element is the function download_video/stream_video of the file app/controllers/v1/video.py of the component URL Handler. The manipulation of the argument file_path leads to path traversal. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability has been found in harry0703 MoneyPrinterTurbo up to 1.2.6 and classified as critical. Affected by this vulnerability is the function download_video/delete_video of the file app/controllers/v1/video.py. The manipulation leads to path traversal. The attack can be launched remotely. |
| An arbitrary file upload vulnerability exists in the Zhiyuan OA platform via the wpsAssistServlet interface. The realFileType and fileId parameters are improperly validated during multipart file uploads, allowing unauthenticated attackers to upload crafted JSP files outside of intended directories using path traversal. Successful exploitation enables remote code execution as the uploaded file can be accessed and executed through the web server. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-01 UTC. |
| A vulnerability was found in CRI-O. A path traversal issue in the log management functions (UnMountPodLogs and LinkContainerLogs) may allow an attacker with permissions to create and delete Pods to unmount arbitrary host paths, leading to node-level denial of service by unmounting critical system directories. |
| A path traversal vulnerability was identified in Samba when processing client pipe names connecting to Unix domain sockets within a private directory. Samba typically uses this mechanism to connect SMB clients to remote procedure call (RPC) services like SAMR LSA or SPOOLSS, which Samba initiates on demand. However, due to inadequate sanitization of incoming client pipe names, allowing a client to send a pipe name containing Unix directory traversal characters (../). This could result in SMB clients connecting as root to Unix domain sockets outside the private directory. If an attacker or client managed to send a pipe name resolving to an external service using an existing Unix domain socket, it could potentially lead to unauthorized access to the service and consequential adverse events, including compromise or service crashes. |
| SPON IP Network Broadcast System, a digital audio transmission platform developed by SPON Communications, contains an arbitrary file read vulnerability in the rj_get_token.php endpoint. The flaw arises from insufficient input validation on the jsondata[url] parameter, which allows attackers to perform directory traversal and access sensitive files on the server. An unauthenticated remote attacker can exploit this vulnerability by sending a crafted POST request to read arbitrary files, potentially exposing system configuration, credentials, or internal logic. An affected version range is undefined. |
| A flaw was found in the Netfilter subsystem in the Linux kernel. The issue is in the nft_byteorder_eval() function, where the code iterates through a loop and writes to the `dst` array. On each iteration, 8 bytes are written, but `dst` is an array of u32, so each element only has space for 4 bytes. That means every iteration overwrites part of the previous element corrupting this array of u32. This flaw allows a local user to cause a denial of service or potentially break NetFilter functionality. |
| A flaw was discovered in the mholt/archiver package. This flaw allows an attacker to create a specially crafted tar file, which, when unpacked, may allow access to restricted files or directories. This issue can allow the creation or overwriting of files with the user's or application's privileges using the library. |
