| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: ir_toy: free before error exiting
Fix leak in error path. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: fix mpol_new leak in shared_policy_replace
If mpol_new is allocated but not used in restart loop, mpol_new will be
freed via mpol_put before returning to the caller. But refcnt is not
initialized yet, so mpol_put could not do the right things and might
leak the unused mpol_new. This would happen if mempolicy was updated on
the shared shmem file while the sp->lock has been dropped during the
memory allocation.
This issue could be triggered easily with the below code snippet if
there are many processes doing the below work at the same time:
shmid = shmget((key_t)5566, 1024 * PAGE_SIZE, 0666|IPC_CREAT);
shm = shmat(shmid, 0, 0);
loop many times {
mbind(shm, 1024 * PAGE_SIZE, MPOL_LOCAL, mask, maxnode, 0);
mbind(shm + 128 * PAGE_SIZE, 128 * PAGE_SIZE, MPOL_DEFAULT, mask,
maxnode, 0);
} |
| In the Linux kernel, the following vulnerability has been resolved:
block: null_blk: end timed out poll request
When poll request is timed out, it is removed from the poll list,
but not completed, so the request is leaked, and never get chance
to complete.
Fix the issue by ending it in timeout handler. |
| In the Linux kernel, the following vulnerability has been resolved:
memory: renesas-rpc-if: fix platform-device leak in error path
Make sure to free the flash platform device in the event that
registration fails during probe. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix leak of nested actions
While parsing user-provided actions, openvswitch module may dynamically
allocate memory and store pointers in the internal copy of the actions.
So this memory has to be freed while destroying the actions.
Currently there are only two such actions: ct() and set(). However,
there are many actions that can hold nested lists of actions and
ovs_nla_free_flow_actions() just jumps over them leaking the memory.
For example, removal of the flow with the following actions will lead
to a leak of the memory allocated by nf_ct_tmpl_alloc():
actions:clone(ct(commit),0)
Non-freed set() action may also leak the 'dst' structure for the
tunnel info including device references.
Under certain conditions with a high rate of flow rotation that may
cause significant memory leak problem (2MB per second in reporter's
case). The problem is also hard to mitigate, because the user doesn't
have direct control over the datapath flows generated by OVS.
Fix that by iterating over all the nested actions and freeing
everything that needs to be freed recursively.
New build time assertion should protect us from this problem if new
actions will be added in the future.
Unfortunately, openvswitch module doesn't use NLA_F_NESTED, so all
attributes has to be explicitly checked. sample() and clone() actions
are mixing extra attributes into the user-provided action list. That
prevents some code generalization too. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slub: Avoid list corruption when removing a slab from the full list
Boot with slub_debug=UFPZ.
If allocated object failed in alloc_consistency_checks, all objects of
the slab will be marked as used, and then the slab will be removed from
the partial list.
When an object belonging to the slab got freed later, the remove_full()
function is called. Because the slab is neither on the partial list nor
on the full list, it eventually lead to a list corruption (actually a
list poison being detected).
So we need to mark and isolate the slab page with metadata corruption,
do not put it back in circulation.
Because the debug caches avoid all the fastpaths, reusing the frozen bit
to mark slab page with metadata corruption seems to be fine.
[ 4277.385669] list_del corruption, ffffea00044b3e50->next is LIST_POISON1 (dead000000000100)
[ 4277.387023] ------------[ cut here ]------------
[ 4277.387880] kernel BUG at lib/list_debug.c:56!
[ 4277.388680] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 4277.389562] CPU: 5 PID: 90 Comm: kworker/5:1 Kdump: loaded Tainted: G OE 6.6.1-1 #1
[ 4277.392113] Workqueue: xfs-inodegc/vda1 xfs_inodegc_worker [xfs]
[ 4277.393551] RIP: 0010:__list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.394518] Code: 48 91 82 e8 37 f9 9a ff 0f 0b 48 89 fe 48 c7 c7 28 49 91 82 e8 26 f9 9a ff 0f 0b 48 89 fe 48 c7 c7 58 49 91
[ 4277.397292] RSP: 0018:ffffc90000333b38 EFLAGS: 00010082
[ 4277.398202] RAX: 000000000000004e RBX: ffffea00044b3e50 RCX: 0000000000000000
[ 4277.399340] RDX: 0000000000000002 RSI: ffffffff828f8715 RDI: 00000000ffffffff
[ 4277.400545] RBP: ffffea00044b3e40 R08: 0000000000000000 R09: ffffc900003339f0
[ 4277.401710] R10: 0000000000000003 R11: ffffffff82d44088 R12: ffff888112cf9910
[ 4277.402887] R13: 0000000000000001 R14: 0000000000000001 R15: ffff8881000424c0
[ 4277.404049] FS: 0000000000000000(0000) GS:ffff88842fd40000(0000) knlGS:0000000000000000
[ 4277.405357] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4277.406389] CR2: 00007f2ad0b24000 CR3: 0000000102a3a006 CR4: 00000000007706e0
[ 4277.407589] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4277.408780] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4277.410000] PKRU: 55555554
[ 4277.410645] Call Trace:
[ 4277.411234] <TASK>
[ 4277.411777] ? die+0x32/0x80
[ 4277.412439] ? do_trap+0xd6/0x100
[ 4277.413150] ? __list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.414158] ? do_error_trap+0x6a/0x90
[ 4277.414948] ? __list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.415915] ? exc_invalid_op+0x4c/0x60
[ 4277.416710] ? __list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.417675] ? asm_exc_invalid_op+0x16/0x20
[ 4277.418482] ? __list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.419466] ? __list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.420410] free_to_partial_list+0x515/0x5e0
[ 4277.421242] ? xfs_iext_remove+0x41a/0xa10 [xfs]
[ 4277.422298] xfs_iext_remove+0x41a/0xa10 [xfs]
[ 4277.423316] ? xfs_inodegc_worker+0xb4/0x1a0 [xfs]
[ 4277.424383] xfs_bmap_del_extent_delay+0x4fe/0x7d0 [xfs]
[ 4277.425490] __xfs_bunmapi+0x50d/0x840 [xfs]
[ 4277.426445] xfs_itruncate_extents_flags+0x13a/0x490 [xfs]
[ 4277.427553] xfs_inactive_truncate+0xa3/0x120 [xfs]
[ 4277.428567] xfs_inactive+0x22d/0x290 [xfs]
[ 4277.429500] xfs_inodegc_worker+0xb4/0x1a0 [xfs]
[ 4277.430479] process_one_work+0x171/0x340
[ 4277.431227] worker_thread+0x277/0x390
[ 4277.431962] ? __pfx_worker_thread+0x10/0x10
[ 4277.432752] kthread+0xf0/0x120
[ 4277.433382] ? __pfx_kthread+0x10/0x10
[ 4277.434134] ret_from_fork+0x2d/0x50
[ 4277.434837] ? __pfx_kthread+0x10/0x10
[ 4277.435566] ret_from_fork_asm+0x1b/0x30
[ 4277.436280] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one()
The error handling path of the probe releases a resource that is not freed
in the remove function. In some cases, a ioremap() must be undone.
Add the missing iounmap() call in the remove function. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imx: Fix memory leak in imx_pd_connector_get_modes
Avoid leaking the display mode variable if of_get_drm_display_mode
fails.
Addresses-Coverity-ID: 1443943 ("Resource leak") |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: iaa - Fix async_disable descriptor leak
The disable_async paths of iaa_compress/decompress() don't free idxd
descriptors in the async_disable case. Currently this only happens in
the testcases where req->dst is set to null. Add a test to free them
in those paths. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: rfi: fix potential response leaks
If the rx payload length check fails, or if kmemdup() fails,
we still need to free the command response. Fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
mxser: fix xmit_buf leak in activate when LSR == 0xff
When LSR is 0xff in ->activate() (rather unlike), we return an error.
Provided ->shutdown() is not called when ->activate() fails, nothing
actually frees the buffer in this case.
Fix this by properly freeing the buffer in a designated label. We jump
there also from the "!info->type" if now too. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom_q6v5_mss: Fix some leaks in q6v5_alloc_memory_region
The device_node pointer is returned by of_parse_phandle() or
of_get_child_by_name() with refcount incremented.
We should use of_node_put() on it when done.
This function only call of_node_put(node) when of_address_to_resource
succeeds, missing error cases. |
| In the Linux kernel, the following vulnerability has been resolved:
watch_queue: Actually free the watch
free_watch() does everything barring actually freeing the watch object. Fix
this by adding the missing kfree.
kmemleak produces a report something like the following. Note that as an
address can be seen in the first word, the watch would appear to have gone
through call_rcu().
BUG: memory leak
unreferenced object 0xffff88810ce4a200 (size 96):
comm "syz-executor352", pid 3605, jiffies 4294947473 (age 13.720s)
hex dump (first 32 bytes):
e0 82 48 0d 81 88 ff ff 00 00 00 00 00 00 00 00 ..H.............
80 a2 e4 0c 81 88 ff ff 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8214e6cc>] kmalloc include/linux/slab.h:581 [inline]
[<ffffffff8214e6cc>] kzalloc include/linux/slab.h:714 [inline]
[<ffffffff8214e6cc>] keyctl_watch_key+0xec/0x2e0 security/keys/keyctl.c:1800
[<ffffffff8214ec84>] __do_sys_keyctl+0x3c4/0x490 security/keys/keyctl.c:2016
[<ffffffff84493a25>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff84493a25>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
[<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae |
| In the Linux kernel, the following vulnerability has been resolved:
media: usb: go7007: s2250-board: fix leak in probe()
Call i2c_unregister_device(audio) on this error path. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: sysfb: fix platform-device leak in error path
Make sure to free the platform device also in the unlikely event that
registration fails. |
| In the Linux kernel, the following vulnerability has been resolved:
brcmfmac: pcie: Release firmwares in the brcmf_pcie_setup error path
This avoids leaking memory if brcmf_chip_get_raminfo fails. Note that
the CLM blob is released in the device remove path. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom-qmp: fix struct clk leak on probe errors
Make sure to release the pipe clock reference in case of a late probe
error (e.g. probe deferral). |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom-qmp: fix reset-controller leak on probe errors
Make sure to release the lane reset controller in case of a late probe
error (e.g. probe deferral).
Note that due to the reset controller being defined in devicetree in
"lane" child nodes, devm_reset_control_get_exclusive() cannot be used
directly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix potential sta-link leak
When a station is allocated, links are added but not
set to valid yet (e.g. during connection to an AP MLD),
we might remove the station without ever marking links
valid, and leak them. Fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Fix DMA mappings leak
Fix leak, when user changes ring parameters.
During reallocation of RX buffers, new DMA mappings are created for
those buffers. New buffers with different RX ring count should
substitute older ones, but those buffers were freed in ice_vsi_cfg_rxq
and reallocated again with ice_alloc_rx_buf. kfree on rx_buf caused
leak of already mapped DMA.
Reallocate ZC with xdp_buf struct, when BPF program loads. Reallocate
back to rx_buf, when BPF program unloads.
If BPF program is loaded/unloaded and XSK pools are created, reallocate
RX queues accordingly in XDP_SETUP_XSK_POOL handler.
Steps for reproduction:
while :
do
for ((i=0; i<=8160; i=i+32))
do
ethtool -G enp130s0f0 rx $i tx $i
sleep 0.5
ethtool -g enp130s0f0
done
done |
