| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: don't rely on id table pointer arithmetic
The current code is broken when dynamic ID is involved; in such cases
usb_device_id parameter of probe lives on the heap and the pointer
arithmetic will get an index that is wildly out of bound. Instead of
keeping a side table for additional information, use driver_info field of
the usb_device_id.
The dynamic ID parsing code needs to be updated for this; convert it to
just write to the reserved entry for dynamic ID and remove the weird loop. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xusbatm: don't rely on id table pointer arithmetic
The current code is broken when dynamic ID is involved; in such cases
usb_device_id parameter of probe lives on the heap and the pointer
arithmetic will get an index that is wildly out of bound. xusbatm
initialize the USB device IDs dynamically so it can just use driver_info
too.
Even with conversion, xusbatm still cannot support dynamic IDs, so also set
no_dynamic_id. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix queue teardown NULL dma_free and bitmap locking
qla25xx_free_req_que() and qla25xx_free_rsp_que() have two pre-existing
bugs exposed on the error path of qla25xx_create_{req,rsp}_que():
1. When dma_alloc_coherent() fails during queue creation, the error
path calls the free function with req->ring / rsp->ring still NULL
(from kzalloc). The unconditional dma_free_coherent() with a NULL
cpu_addr is undefined behavior and can panic.
2. The free functions clear req_qid_map / rsp_qid_map under vport_lock,
but the create functions protect the same bitmaps with mq_lock.
This provides no mutual exclusion. Additionally, the create error
path clears the bit and releases mq_lock before calling the free
function, creating a window where another thread can allocate the
same que_id and have its ha->req_q_map entry clobbered by the
subsequent lockless NULL assignment in the free function.
Fix by:
- Guarding dma_free_coherent() with a NULL check on the ring pointer.
- Using mq_lock (the lock held by all creators) in the free functions
to atomically NULL the map entry and clear the bitmap bit.
- Removing the now-redundant clear_bit blocks from the create error
paths since the free functions handle it atomically. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Null out freed pointers in qla2x00_mem_alloc() error path
When qla2x00_mem_alloc() fails, qla2x00_probe_one() jumps to
probe_hw_failed and calls qla2x00_mem_free(). Several error labels in
qla2x00_mem_alloc() freed adapter members (elsrej.c, purex_dma_pool,
flt, sfp_data, loop_id_map, async_pd, sf_init_cb, ex_init_cb, npiv_info)
but left the pointers dangling. qla2x00_mem_free() then freed them a
second time. Worse, for the dma_pool members it issued
dma_pool_free(ha->s_dma_pool, ...) after s_dma_pool had already been
destroyed and set to NULL at fail_s_dma_pool, dereferencing a NULL pool.
Clear each freed pointer (and its DMA handle) in the error labels so the
subsequent qla2x00_mem_free() skips them. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: fix quota init duplicate scan
gfs2_quota_init() checks for duplicate quota_change IDs while holding
qd_lock and the quota hash bucket bitlock. That path used
gfs2_qd_search_bucket(), which takes a lockref reference via
lockref_get_not_dead().
On PREEMPT_RT this may sleep, which is not allowed under the bucket
bitlock, triggering "sleeping function called from invalid context".
Use a no-ref bucket lookup in this path, then continue duplicate
handling without taking a lockref there.
Refactor gfs2_qd_search_bucket() to build on top of the no-ref helper
so lookup traversal stays in one place.
This patch fixes a bug reported by syzbot. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix null pointer dereference in devcoredump cleanup
In xe_devcoredump_snapshot_free(), ss->gt may be NULL when the snapshot
was never fully populated (e.g., when cleanup is triggered without a
prior capture). Guard the xe_guc_capture_put_matched_nodes() call with
IS_ERR_OR_NULL() to prevent a null dereference.
In xe_devcoredump_free(), the deferred work is only queued when a
coredump is captured, so guard cancel_work_sync() with a check on
coredump->captured. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: reject duplicate wiphy cipher suite entries
Duplicate entries in wiphy->cipher_suites do not describe any
additional capability, but cfg80211 currently accepts them and leaves
individual consumers to deal with them.
One such consumer is the WEXT compatibility code, which appends a WEP
key length for each WEP cipher entry it sees. Repeated WEP entries can
therefore overflow the fixed iw_range::encoding_size array returned by
SIOCGIWRANGE.
Reject duplicate cipher suite entries in wiphy_register() instead.
This keeps the cipher suite invariant in one place and makes malformed
wiphy descriptions fail early with -EINVAL, rather than relying on a
single cfg80211 user to handle duplicates correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: reject beacons with bad HE operation
The HE operation element not only needs to be longer than
the fixed part, but also have an appropriate size for the
variable part inside of it. Check this. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: Add NULL check for chip->edcca_th in rtw_fw_adaptivity_result()
It was recently reported that rtw_fw_adaptivity_result()
in fw.c dereferences rtwdev->chip->edcca_th without
a NULL check. The issue is that devices with the
8821CE chip don't define edcca_th in their chip
info. As a result, when rtw_fw_adaptivity_result()
tries to dereference it, the kernel triggers an oops.
Add a NULL check for edcca_th before dereferencing
it in rtw_fw_adaptivity_result() in fw.c. Placing
the check at the function entry avoids logging any
garbage values.
This change does not address the root cause for
this behavior, but it prevents the NULL dereference
and the resulting oops while a more permanent solution
is developed.
Tested on a 8822CE chip which defines edcca_th, so
this issue is not present on it, but it still uses
this driver and I can verify there are no regressions. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: svc: Prevent IRQ storm from false SLVSTART on NPCM845
On NPCM845, when a target on the I3C bus gets stuck holding SDA low,
the controller reports a false Master Request (MR) in-band interrupt
event. The driver handles this by emitting a STOP condition to restore
the bus.
However, the hardware quirk SVC_I3C_QUIRK_FALSE_SLVSTART indicates that
emitting a STOP condition may spuriously set the SLVSTART interrupt
status bit. In the Master Request case, this creates a feedback loop:
the STOP triggers a new SLVSTART event, the IRQ handler fires again,
the controller still reports an MR type, another STOP is emitted, and
the cycle repeats indefinitely, resulting in an IRQ storm that can lock
up the CPU.
Clear the SLVSTART status bit explicitly after emitting the STOP in the
Master Request IBI handler when the SVC_I3C_QUIRK_FALSE_SLVSTART quirk
is set. This breaks the feedback loop without affecting normal SLVSTART
processing, which is already guarded in the top-level IRQ handler by
checking that MSTATUS is in SLVREQ state. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Fix Reports from Kernel Lock Validator
handle_dynamic_resolution change requires that the state_lock be acquired
based on the lockdep_assert_held. However, the
handle_dynamic_resolution_change call in initialize_sequence does not
properly obtain the lock before calling.
Since the v4l2_ctrl_find and s_ctrl can sleep, they should not be called
while a lock is already held. Store off the fbc_buf_count then properly
update control once lock has been freed. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Release m2m_ctx after Instance Removed from List
Possible use after free if IRQ thread manages to obtain spinlock between
m2m_ctx release and wave5_release function removing stream instance from
list of active instances. The IRQ thread looks for the m2m_ctx which is
freed so null pointer dereference occurs. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-qcom-qspi: Fix incomplete error handling in runtime PM
The runtime PM functions had incomplete error handling that could leave the
system in an inconsistent state. If any operation failed midway through
suspend or resume, some resources would be left in the wrong state while
others were already changed, leading to potential clock/power imbalances.
Reorder the suspend/resume sequences to avoid brownout risk by ensuring the
performance state is set appropriately before clocks are enabled and clocks
are disabled before dropping the performance state.
Fix by adding proper error checking for all operations and using goto-based
cleanup to ensure all successfully acquired resources are properly released
on any error. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: avoid out-of-bounds access in monitor
In NAN, we don't know on what band the frame will be sent. Therefore we
set info->band to NUM_NL80211_BANDS. However, this leads to out-of-bound
access in ieee80211_add_tx_radiotap_header when we try to access the
sbands array.
Fix it by not accessing the array if the band is NUM_NL80211_BANDS.
This means that we will not report rate info for legacy rate in NAN.
But nobody really cares about it. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Release request if tb_cfg_request() fails in __tb_xdomain_response()
If tb_cfg_request() fails setting up the request (for example the
control channel is shut down already) it returns an error without
calling the callback. To avoid leaking that memory, call
tb_cfg_request_put() if tb_cfg_request() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Keep XDomain reference during the lifetime of a service
This is needed because we release the service ID in tb_service_release()
and the ID array is owned by the parent XDomain. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Set tb->root_switch to NULL when domain is stopped
Similarly what we do with the firmware connection manager. This makes
tb_xdp_handle_request() return error to the remote host. However, we
need to make sure we keep the uuid alive so that we can reply until the
whole domain is released. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dm1105: fix missing error check for dma_alloc_coherent
The return value of dm1105_dma_map(), which handles DMA memory allocation,
is ignored in dm1105_hw_init(). If dma_alloc_coherent() fails, the driver
will proceed using a NULL pointer for DMA transfers, leading to a kernel
oops or invalid hardware access.
Fix this by checking the return value and propagating -ENOMEM on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ixp4xx - fix buffer chain unwind on allocation failure
chainup_buffers() builds a linked list of buffer descriptors for a
scatterlist. If dma_pool_alloc() fails while constructing the list, the
current code sets buf to NULL and later dereferences it unconditionally
at the end of the function:
buf->next = NULL;
buf->phys_next = 0;
This can lead to a null-pointer dereference on allocation failure.
If the failure happens after part of the descriptor chain has already
been allocated and DMA-mapped, the partially constructed chain also
needs to be released.
Fix this by terminating the partially constructed chain on allocation
failure and letting the callers unwind it via their existing cleanup
paths. Also fix ablk_perform() to preserve the hook pointers before
checking for failure, so partially built chains can be freed correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/sysfs: Add CAP_SYS_ADMIN check to __resource_resize_store()
Currently, the __resource_resize_store() allows writing to the
resourceN_resize sysfs attribute to change a BAR's size without checking
for capabilities, currently relying only on the file access check.
Resizing a BAR modifies PCI device configuration and can disrupt active
drivers. After the upcoming conversion to static attributes, it will also
trigger resource file updates via sysfs_update_groups().
Add a CAP_SYS_ADMIN check to prevent unprivileged users from performing BAR
resize operations. |
