| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: skip rehash for peers already removed from by_id
ovpn_nl_peer_set_doit() resolves the target peer via
ovpn_peer_get_by_id() before taking ovpn->lock. In the window between
the lookup (which only takes a refcount) and the subsequent
spin_lock_bh(&ovpn->lock), a concurrent OVPN_CMD_PEER_DEL, keepalive
expiry, or socket teardown can take ovpn->lock first, run
ovpn_peer_remove() to unhash the peer from all four tables (by_id,
by_vpn_addr4/6, by_transp_addr) and release the lock. set_doit then
acquires ovpn->lock and calls ovpn_peer_hash_vpn_ip(), which
re-inserts the now-removed peer back into the rehashing tables.
The same race affects the float path: ovpn_peer_endpoints_update()
holds only a refcount and acquires ovpn->lock very late (after async
AEAD decrypt and a netlink notification), then rehashes the peer
in the by_transp_addr table.
The resurrected peer becomes reachable again from the RX lookup
(ovpn_peer_get_by_transp_addr) and the TX VPN-IP lookup, even though
userspace believes it is gone. Once the data-path refcount drops the
peer is freed via call_rcu while the hash entries embedded in it
remain linked, opening a UAF window.
Bail out of the rehash when hash_entry_id is unhashed, mirroring
the sentinel already used by ovpn_peer_remove() to detect the
already-removed state. The check is safe under ovpn->lock, which
serializes every mutation of hash_entry_id, and is a no-op for the
add path because ovpn_peer_add_mp() inserts hash_entry_id before
calling ovpn_peer_hash_vpn_ip(). |
| The Infineon Airoc Wi-Fi driver's transmit callback airoc_mgmt_send() in drivers/wifi/infineon/airoc_wifi.c allocates a net_buf from the fixed airoc_pool for every outbound packet. When whd_network_send_ethernet_data() returns a synchronous failure, the underlying WHD library does not take ownership of the buffer, but the pre-fix driver returned -EIO without releasing it. Each failed transmit therefore permanently leaks one buffer from the pool.
airoc_pool is small and fixed (AIROC_WIFI_TX_PACKET_POOL_COUNT + AIROC_WIFI_RX_PACKET_POOL_COUNT, default 20 buffers) and is shared by WHD's whd_host_buffer_get callback for both transmit and receive. Once enough send failures have leaked the pool dry, airoc_wifi_host_buffer_get() returns WHD_BUFFER_ALLOC_FAIL for all subsequent allocations, so both transmit and the WHD-driven receive path fail and Wi-Fi connectivity is lost until the device is rebooted.
The leak occurs only on the transmit error path. A Wi-Fi-adjacent attacker can influence the conditions that cause synchronous send failures (for example by deauthenticating/disassociating the station while the local stack continues to attempt transmits), and ordinary transient failures over the device's lifetime accumulate toward the same state. Reliable on-demand triggering is of high complexity and the impact is availability-only, but the resulting denial of service is permanent and non-recoverable without a reboot.
The fix releases the buffer with airoc_wifi_buffer_release() on the failure branch, returning it to the pool. The commit also removes a redundant k_sem_give() in airoc_mgmt_disconnect(); because data->sema_common is a binary semaphore (limit 1) the duplicate give merely saturated at 1 and had no security impact. |
| A vulnerability has been found in Systerel S2OPC up to 1.7.3. Impacted is the function SOPC_NodeMgtHelperInternal_AddVariableNodeAttributes of the file src/ClientServer/address_space/internal/sopc_node_mgt_helper_internal.c of the component AddNodes Service. The manipulation of the argument UserAccessLevel leads to out-of-bounds read. It is possible to initiate the attack remotely. A high degree of complexity is needed for the attack. The exploitability is considered difficult. The exploit has been disclosed to the public and may be used. The identifier of the patch is aafbd37d381b618312ebdf5ddf57027f62c14fdd. It is suggested to install a patch to address this issue. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix netns reference imbalance in conntrack kfuncs
The opts argument of the BPF conntrack kfuncs can point to a shared
map value. __bpf_nf_ct_lookup() and __bpf_nf_ct_alloc_entry() read
opts->netns_id separately when acquiring and releasing the network
namespace reference.
The reference imbalance can occur as follows:
CPU 0 CPU 1
read opts->netns_id (-1)
skip get_net_ns_by_id()
write opts->netns_id (id)
read opts->netns_id (id)
put_net(net) /* no matching get */
The reverse transition leaks the reference. Repeating the unmatched put
can destroy a live namespace and crash later users.
The kernel reported:
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
RIP: 0010:bpf_prog_test_run_xdp+0x52c/0x1700
Call Trace:
__sys_bpf+0x1662/0x50c0
__x64_sys_bpf+0x73/0xb0
do_syscall_64+0xf9/0x540
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Kernel panic - not syncing: Fatal exception
Snapshot every input field of opts with READ_ONCE() before validating or
using it. The netns_id snapshot keeps the namespace get/put pair
balanced, while the other snapshots keep the remaining options from
changing partway through an invocation. The individual reads can still
observe an inconsistent combination during a concurrent update, but each
selected field value remains stable for that invocation. |
| In the Linux kernel, the following vulnerability has been resolved:
vt: stabilize tty reference in kbd_keycode with tty_port_tty_get
kbd_keycode() reads vc->port.tty without acquiring a tty reference,
racing against con_shutdown() which clears port.tty under a different
lock. Use tty_port_tty_get()/tty_kref_put() to hold a proper reference
for the duration the tty pointer is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: fw_tracer, return NULL on create error
Tracer creation can fail by returning either NULL or ERR_PTR.
The return value is stored without a check on the device, and users
treat ERR_PTR and NULL the same way.
This also causes a crash in the core dump logic, which is missing the
ERR_PTR check and ends up dereferencing it, as shown in the trace below.
Switch tracer creation to return NULL on failure only, so callers only
need a single NULL check.
Internal error: Oops: 0000000096000006 [#1] SMP
Modules linked in: mlx5_ib ib_uverbs ib_core ipv6 mlx5_core
CPU: 1 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.19.7 #1 PREEMPT(none)
Workqueue: mlx5_health0001:01:00.0 mlx5_fw_reporter_err_work [mlx5_core]
pstate: a3400009 (NzCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : mlx5_fw_tracer_trigger_core_dump_general+0x58/0xe0 [mlx5_core]
lr : mlx5_fw_tracer_trigger_core_dump_general+0x40/0xe0 [mlx5_core]
sp : ffff800081cf3c40
x29: ffff800081cf3c90 x28: 0000000000000000 x27: 0000000000000000
x26: ffff000080018828 x25: 0000000000000000 x24: ffff000080304a05
x23: ffff800081cf3d80 x22: ffff0000847e01a0 x21: 0000000000000000
x20: ffff0000847e01a0 x19: ffffffffffffffa1 x18: ffff80008310bbf0
x17: ffff800080119650 x16: ffff80008010df54 x15: ffff80008010d4ac
x14: ffff800079c202e4 x13: ffff80008002fe60 x12: ffff800080119650
x11: ffff80008010df54 x10: ffff80008010d4ac x9 : ffff800079c203d8
x8 : ffff800081cf3c88 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000008 x3 : 0000000000000030
x2 : 0000000000000008 x1 : 0000000000000000 x0 : 00000000c5c4000e
Call trace:
mlx5_fw_tracer_trigger_core_dump_general+0x58/0xe0 [mlx5_core] (P)
mlx5_fw_reporter_dump+0x30/0x2e0 [mlx5_core]
devlink_health_do_dump+0x9c/0x160
devlink_health_report+0x1c0/0x288
mlx5_fw_reporter_err_work+0xac/0xc0 [mlx5_core]
process_one_work+0x15c/0x3d8
worker_thread+0x18c/0x320
kthread+0x148/0x228
ret_from_fork+0x10/0x20
Code: b9400000 5ac00800 7a401800 540003ca (3940a260)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x000000,00078031,75fce5a1,35fffe67
Memory Limit: none
---[ end Kernel panic - not syncing: Oops: Fatal exception ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Use unsigned int for ndp_index
The variable ndp_index is declared as a signed integer, but it stores
the return value of get_ncm(), which is unsigned.
A malicious host can supply a large offset that overflows the signed
ndp_index, making it negative. Because ndp_index is compared against
unsigned bounds, this negative value bypasses sanity checks and leads
to an out-of-bounds read when calculating the address of the NDP
block (ntb_ptr + ndp_index).
Fix this by changing ndp_index to unsigned int to ensure consistent
unsigned comparisons throughout the function. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_dma: Clear stale RX state on shutdown
serial8250_release_dma() terminates RX DMA and releases the channel, but
leaves rx_running set. If the port is closed while an RX transfer is
active, the stale state remains while rxchan is NULL until the channel is
requested again on the next open.
The DesignWare BUSY workaround added by commit a7b9ce39fbe4
("serial: 8250_dw: Ensure BUSY is deasserted") calls
serial8250_rx_dma_flush() from the LCR write path during startup. This
happens before serial8250_request_dma() obtains a new RX channel. On
reopen, the stale rx_running state therefore makes the flush path pass a
NULL channel to dmaengine_pause(), causing a kernel Oops.
Clear rx_running after terminating RX DMA, matching the TX cleanup. Also
make the flush helper return if the DMA object or RX channel is not
available so startup and teardown paths cannot pass a NULL channel to the
DMAengine API. |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: fix netdev use-after-free in beacon worker
mac802154_beacon_worker() reads local->beacon_req under RCU and derives
the sub-interface from the request, but then drops the RCU read lock and
continues to use both sdata and the embedded wpan_dev.
mac802154_stop_beacons_locked() cancels only pending beacon work, clears
local->beacon_req and frees the request. A beacon worker that is already
running can therefore continue after interface teardown and dereference
the freed netdev private area.
The scan worker already pins the netdev before leaving RCU. Apply the
same lifetime rule to the beacon worker: take a netdev reference while
the request is still protected by RCU, and release it on all paths that
continue after the reference is acquired. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: reject overly deep qdisc hierarchies
Deep qdisc hierarchies can lead to excessive recursion in qdisc tree
walkers and exhaust the kernel stack. The existing loop check does not
cover the create-and-graft path, so a hierarchy can still be extended by
creating a new child qdisc below an already deep parent.
Store the hierarchy depth in struct Qdisc and update it when qdiscs are
grafted. Reject new child qdiscs once the parent is already at the maximum
allowed depth. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mrp: fix uninitialised bytes on the wire
br_mrp_alloc_test_skb() builds MRP test frames on an skb from
dev_alloc_skb(), which does not clear the linear data area. On the MRA
ring-role branch the sub-option TLV header is appended with
sub_tlv = skb_put(skb, sizeof(*sub_tlv));
sub_tlv->type = BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR;
so sub_tlv->length is never written, and the two trailing alignment bytes
are appended with a bare skb_put() that does not clear them either. The
neighbouring oui and sub_opt regions are explicitly zeroed, so three
uninitialised bytes are left in every MRA MRP_Test frame that goes out.
Put the sub-option TLV header and the alignment padding in a single
skb_put_zero(), which clears both. The AUTO_MGR sub-TLV carries no
payload, so the zeroed length field is already the value it should have. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix skb length accounting after generic XDP frag adjustment
Generic XDP exposes non-linear skb fragments through an xdp_buff. If an
XDP program adjusts the fragment area, bpf_prog_run_generic_xdp() copies
xdp_frags_size back to skb->data_len but leaves skb->len containing the
old fragment contribution.
After a fragment shrink, this makes skb_headlen() larger than the actual
linear area. In the reproduced UDP receive path, __skb_datagram_iter()
copied 1024 bytes past the actual linear tail to userspace, starting at
struct skb_shared_info. The copied bytes included the affected skb's
nr_frags, xdp_frags_size and a kernel pointer from
skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same
amount and truncated at the end.
Subtract the old data_len before replacing it and add the new data_len
afterwards, keeping skb->len and skb->data_len synchronized.
A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by
1024 bytes from its fragment area. Before the fix, all 10 runs produced
corrupted payloads. After the fix, all 10 runs matched the expected
payload exactly. |
| In setupLayout of PickActivity.java, there is a possible way to start any activity as a DocumentsUI app due to a confused deputy. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: bitblit: bound-check glyph index in bit_cursor()
bit_cursor() fetches the glyph under the cursor with
c = scr_readw(vc_pos);
src = vc_font.data + ((c & charmask) * w * height);
where charmask is 0x1ff when vc_hi_font_mask is set. The screen buffer
value comes directly from scr_readw() and may be larger than the current
font's glyph count.
Syzkaller triggers this via vcs_write(). The Call Trace shows
vcs_write() in vc_screen.c writing an arbitrary 16-bit value with
writev() to /dev/vcsa, which vcs_write_buf() in vc_screen.c stores via
vcs_scr_writew() without checking charcount. The stored value is later
read in bit_cursor() in bitblit.c.
When the font is changed from a font with 512 glyphs to a font with
256 glyphs, the screen buffer can retain characters with the high
bit set from the previous mode, which could also produce the same
out-of-bounds access.
BUG: KASAN: global-out-of-bounds in soft_cursor+0x378/0x6bc drivers/video/fbdev/core/softcursor.c:70
Read of size 16 at addr ffff800086c57970
Call Trace:
soft_cursor+0x378/0x6bc drivers/video/fbdev/core/softcursor.c:70
bit_cursor+0xa90/0x1108 drivers/video/fbdev/core/bitblit.c:365
fbcon_cursor+0x344/0x498 drivers/video/fbdev/core/fbcon.c:1427
hide_cursor+0xdc/0x2d0 drivers/tty/vt/vt.c:883
update_region+0x100/0x18c drivers/tty/vt/vt.c:669
vcs_write+0x8ec/0xaf0 drivers/tty/vt/vc_screen.c:685
bit_putcs_aligned() and bit_putcs_unaligned() already clamp the glyph
index to vc_font.charcount. Apply the same clamp in bit_cursor() after
extracting the attribute and masking, before indexing fontdata.
The fix completes the bounds checking started in commit 18c4ef4e765a
("fbdev: bitblit: bound-check glyph index in bit_putcs*"), which missed
the cursor path.
This change should be safe because the clamp reuses the existing
contract from fbcon: charcount is maintained under console_lock in
con_font_set() and fbcon_font_set(), and hi_font_mask is cleared when
switching from 512 to 256 glyphs. When stale screen data with high bits
remains after a font switch, or when vcs_write() stores an arbitrary
value, clamping the index to 0 prevents the out-of-bounds read without
changing cursor semantics — the same fallback bit_putcs uses. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: clear metadata pointer when no timestamp is requested
User space can change metadata flags after request processing. Rereading
them during completion can therefore make the kernel write a timestamp
that was not requested when the packet was submitted.
Clear the metadata pointer during request processing unless timestamp
completion is requested. Completion handling can then use the pointer
itself instead of rereading the flags.
On the mlx5 multi-packet WQE path metadata is evaluated per batch:
xsk_tx_metadata_request() runs only for the descriptor that starts a
session, just like the checksum offload that is applied once through the
shared WQE. Only that descriptor's pointer is reset, so completion
handling can record a timestamp for the other descriptors of the session
regardless of their own XDP_TXMD_FLAGS_TIMESTAMP bit. The write stays
inside the metadata area; the single-WQE, other zero-copy, and generic
paths reset the pointer per descriptor and are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: avoid out-of-bounds write in ip_vs_nat_icmp
Sashiko warns that local attacker can modify the packet
while it is processed by IPVS. Some places read the
IP ihl field multiple times which can cause out-of-bounds
access. One such place is ip_vs_nat_icmp where we
can write after the validated area.
Fix it by providing ciph argument just like it is done for
IPv6 and use ciph->len as offset to the embedded transport
header.
Modify some IPv4 header checks by reading the ihl field
only once. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: validate monitor transmit frame lengths
rtw_cfg80211_monitor_if_xmit_entry() removes the radiotap header and
then reads the 802.11 frame control field without checking that a base
802.11 header remains.
The data path also pulls the calculated 802.11, QoS and SNAP header
span before confirming that the skb contains it. A truncated frame can
therefore cause out-of-bounds reads or leave insufficient data for the
Ethernet address writes.
Reject frames that do not contain the base 802.11 header and data
frames that do not contain their complete calculated header span. |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: reset the MAC header on the packet-socket transmit path
packet_parse_headers() resets the MAC header only for a SOCK_RAW frame
whose socket did not bind a protocol. A protocol-bound SOCK_RAW socket,
any SOCK_DGRAM frame, and the legacy SOCK_PACKET path therefore leave
skb->mac_header unset here.
For frames sent via __dev_queue_xmit() this is harmless: it resets the
MAC header unconditionally. But the packet-socket PACKET_QDISC_BYPASS
path uses dev_direct_xmit(), which does not, so the frame reaches
ndo_start_xmit() with the MAC header unset. A driver that reads
eth_hdr(skb) on transmit then dereferences skb->head + (u16)~0, an
out-of-bounds access ~64 KiB past the head -- the same class fixed for
one consumer in commit f5089008f90c ("macsec: do not read an unset MAC
header in macsec_encrypt()").
packet_parse_headers() runs only on the transmit path, where skb->data
points at the start of the L2 header for every packet-socket type
regardless of its length: SOCK_RAW and SOCK_PACKET carry a user-supplied
header and SOCK_DGRAM has one built by dev_hard_header(). Reset the MAC
header unconditionally, mirroring __dev_queue_xmit(), so the frame is
anchored on the bypass path too.
Found by 0sec (https://0sec.ai) using automated source analysis;
verified against source and matched to the macsec KASAN report in
f5089008f90c. Compile-tested. |
