| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Optigo Networks Visual BACnet Capture Tool and Optigo Visual Networks Capture Tool version 3.1.2rc11 are vulnerable to an attacker impersonating the web application service and mislead victim clients. |
| In binutils 2.46.1 and prior versions, a victim who opens a crafted PE file using binutils could execute arbitrary code unknowningly via a stack buffer overflow out of bounds write. |
| OneUptime's webhook target check rejects private and loopback addresses given in IPv4 form and a small set of IPv6 forms, but has no case for the IPv4-mapped IPv6 range. The webhook delivery path calls SSRFProtection.validateWebhookTargetIsSafe, and the host-literal screening inside Common/Server/Utils/SSRFProtection.ts, performed by isBlockedHostnameLiteral, rejects private and loopback IPv4 ranges and tests an IPv6 value against the unspecified address, the loopback, the link-local prefix and the unique-local prefixes. A value such as [::ffff:127.0.0.1] matches none of them. The value is also recognised as an address literal rather than a name, so the path that re-checks addresses obtained from resolution is not taken. The HTTP client treats the mapped form as the embedded IPv4 address and connects to it, so an authenticated project member who can configure a webhook can direct the server at loopback services, private network ranges and link-local metadata endpoints, and the response is recorded where the webhook result can be read. Version 12.0.7 adds handling for the mapped range. |
| Optigo Networks Visual BACnet Capture Tool and Optigo Visual Networks Capture Tool version 3.1.2rc11 contain an exposed web management service that could allow an attacker to bypass authentication measures and gain controls over utilities within the products. |
| Optigo Networks Visual BACnet Capture Tool and Optigo Visual Networks Capture Tool version 3.1.2rc11 contain a hard coded secret key. This could allow an attacker to generate valid JWT (JSON Web Token) sessions. |
| A vulnerability was identified in CodeAstro Online Job Portal 1.0. Affected by this vulnerability is an unknown functionality of the file /users/update-profile.php. The manipulation of the argument Name leads to unrestricted upload. The attack can be initiated remotely. The exploit is publicly available and might be used. |
| Improper
neutralization of path traversal sequences in TeamViewer Desktop Clients prior
Version 15.81.5 allows an authenticated remote session participant to write files
to unintended locations on the local file system via file transfer or virtual
file clipboard mechanisms. An attacker can leverage this behavior to achieve
arbitrary file write and potentially execute code with the privileges of the
affected user. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 12.8 before 19.1.7, 19.2 before 19.2.5, and 19.3 before 19.3.1 that, under certain conditions, could have allowed an authenticated user to cause a denial of service affecting background job processing, due to missing object count limits. |
| A malicious actor with access to the network and high privileges could exploit an Improper Input Validation vulnerability found in UniFi OS Server to execute a Command Injection on the host device. |
| A stack-based buffer overflow vulnerability exists in the Dia diagram editor when processing Network Bus objects from Dia XML project files.
In objects/network/bus.c, bus_load() reads the number of bus handles from the file attribute "bus_handles" using attribute_num_data() without validating an upper bound:
bus->num_handles = attribute_num_data(attr);
When a bus handle is subsequently moved, bus_handle_moved() allocates two temporary arrays on the stack:
parallel = (real *)g_alloca(num_handles * sizeof(real));
perp = (real *)g_alloca(num_handles * sizeof(real));
Because num_handles is fully attacker-controlled via the project file, sufficiently large values (for example 262144 or higher) cause g_alloca() to consume more stack space than the default thread stack limit (typically 8 MB on Linux), resulting in stack overflow, SIGSEGV, and potential stack frame / return-address corruption.
An attacker can embed a Bus object with an excessive bus_handles count in a malicious .dia file. Exploitation requires the victim to open the file in Dia (file dialog, command line, or file association) and trigger handle manipulation (moving a bus handle), which exercises the vulnerable code path.
The identical g_alloca pattern is present in objects/Misc/tree.c (copied from bus.c) and is likely vulnerable to the same class of attack via Tree objects.
Affected versions: Dia 0.98.0 and earlier versions containing this code; issue confirmed on upstream master as of 2026-08-21.
Upstream report: https://gitlab.gnome.org/GNOME/dia/-/issues/581 |
| brace-expansion through 5.0.7 is vulnerable to denial of service via memory exhaustion. The expand() function limits the number of results with a max option (default 100,000) but does not bound the length of each result string. By chaining multiple brace groups, an attacker keeps the result count under the limit while making each result progressively longer, so total memory scales with both count and string length until the process hits a fatal, uncatchable out-of-memory error. About 7.5 KB of input ('{a,b}'.repeat(1500)) crashes a default Node.js process. Any application that passes attacker-influenced strings to brace-expansion.expand() - directly or transitively via minimatch / glob brace patterns - can be crashed by a small request. Fixed in 5.0.8 by adding a maxLength option (default 4,000,000) that bounds accumulated output and intermediate arrays. |
| A malicious actor with access to the network and high privileges could exploit an Improper Access Control vulnerability found in UniFi Network Application to escalate privileges within the UniFi Network Application. |
| A malicious actor with access to the network and high privileges could exploit an Improper Input Validation vulnerability found in UID Enterprise Agent to execute a Command Injection on the host device. |
| A malicious actor with access to the network and low privileges could exploit an Improper Input Validation vulnerability found in UniFi Access Application to execute a Command Injection on the host device. |
| A malicious actor with access to the network, low privileges and under certain conditions could exploit an Active Debug Code vulnerability found in certain devices running UniFi OS to escalate privileges within such UniFi OS devices or instances. |
| A malicious actor with access to the network and low privileges could exploit an Improper Input Validation vulnerability found in UniFi Access Application to execute a Command Injection on the host device. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix use-after-free in zram_bvec_write_partial()
zram_read_page() picks the sync or async backing device read path based on
whether the parent bio is NULL. zram_bvec_write_partial() passes its
parent bio down, so for ZRAM_WB slots the read is dispatched
asynchronously and zram_read_page() returns 0 while the bio is still in
flight. The caller then runs memcpy_from_bvec(), zram_write_page() and
__free_page() on the buffer, leaving the async read to write into a freed
page.
zram_bvec_read_partial() was switched to NULL in commit 4e3c87b9421d
("zram: fix synchronous reads") for the same reason; the write_partial
counterpart was missed. |
| In the Linux kernel, the following vulnerability has been resolved:
dm log: fix out-of-bounds write due to region_count overflow
The local variable region_count in create_log_context() is declared as
unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit).
When a device-mapper target has a sufficiently large ti->len with a small
region_size, the division result can exceed UINT_MAX. The truncated
value is then used to calculate bitset_size, causing clean_bits,
sync_bits, and recovering_bits to be allocated far smaller than needed
for the actual number of regions.
Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use
region indices derived from the full untruncated region space, causing
out-of-bounds writes to kernel heap memory allocated by vmalloc.
This can be reproduced by creating a mirror target whose region_count
overflows 32 bits:
dmsetup create bigzero --table '0 8589934594 zero'
dmsetup create mymirror --table '0 8589934594 mirror \
core 2 2 nosync 2 /dev/mapper/bigzero 0 \
/dev/mapper/bigzero 0'
The status output confirms the truncation (sync_count=1 instead of
4294967297, because 0x100000001 was truncated to 1):
$ dmsetup status mymirror
0 8589934594 mirror 2 254:1 254:1 1/4294967297 ...
This leads to a kernel crash in core_in_sync:
BUG: scheduling while atomic: (udev-worker)/9150/0x00000000
RIP: 0010:core_in_sync+0x14/0x30 [dm_log]
CR2: 0000000000000008
Fixing recursive fault but reboot is needed!
Fix by widening the local region_count to sector_t and adding an
explicit overflow check before the value is assigned to lc->region_count. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - copy IV using skcipher ivsize
AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver.
ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV
buffer while RFC3686 skciphers expose an 8-byte IV, so the restore
overruns the provided buffer.
Use crypto_skcipher_ivsize() to copy only the algorithm's IV length. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: purge outqueue on stale COOKIE-ECHO handling
sctp_stream_update() is only invoked when the association is moved into
COOKIE_WAIT during association setup/reconfiguration. In this path, the
outbound stream scheduler state (stream->out_curr) is expected to be
clean, since no user data should have been transmitted yet unless the
state machine has already partially progressed.
However, a corner case exists in sctp_sf_do_5_2_6_stale(): when a
Stale Cookie ERROR is received, the association is rolled back from
COOKIE_ECHOED to COOKIE_WAIT. In this scenario, user data may already
have been queued and even bundled with the COOKIE-ECHO chunk.
During the rollback, sctp_stream_update() frees the old stream table
and installs a new one, but it does not invalidate stream->out_curr.
As a result, out_curr may still point to a freed sctp_stream_out
entry from the previous stream state.
Later, SCTP scheduler dequeue paths (FCFS, RR, PRIO, etc.) rely on
stream->out_curr->ext, which can lead to use-after-free once the old
stream state has been released via sctp_stream_free().
This results in crashes such as (reported by Yuqi):
BUG: KASAN: slab-use-after-free in sctp_sched_fcfs_dequeue+0x13a/0x140
Read of size 8 at addr ff1100004d4d3208 by task mini_poc/9312
CPU: 1 UID: 1001 PID: 9312 Comm: mini_poc Not tainted
7.1.0-rc1-00305-gbd3a4795d574 #5 PREEMPT(full)
sctp_sched_fcfs_dequeue+0x13a/0x140
sctp_outq_flush+0x1603/0x33e0
sctp_do_sm+0x31c9/0x5d30
sctp_assoc_bh_rcv+0x392/0x6f0
sctp_inq_push+0x1db/0x270
sctp_rcv+0x138d/0x3c10
Fix this by fully purging the association outqueue when handling the
Stale Cookie case. This ensures all pending transmit and retransmit
state is dropped, and any scheduler cached pointers are invalidated,
making it safe to rebuild stream state during COOKIE_WAIT restart.
Updating only stream->out_curr would be insufficient, since queued
and retransmittable data would still reference the old stream state and
trigger later use-after-free in dequeue paths. |
