| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/imc-pmu: Fix use of mutex in IRQs disabled section
Current imc-pmu code triggers a WARNING with CONFIG_DEBUG_ATOMIC_SLEEP
and CONFIG_PROVE_LOCKING enabled, while running a thread_imc event.
Command to trigger the warning:
# perf stat -e thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/ sleep 5
Performance counter stats for 'sleep 5':
0 thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/
5.002117947 seconds time elapsed
0.000131000 seconds user
0.001063000 seconds sys
Below is snippet of the warning in dmesg:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2869, name: perf-exec
preempt_count: 2, expected: 0
4 locks held by perf-exec/2869:
#0: c00000004325c540 (&sig->cred_guard_mutex){+.+.}-{3:3}, at: bprm_execve+0x64/0xa90
#1: c00000004325c5d8 (&sig->exec_update_lock){++++}-{3:3}, at: begin_new_exec+0x460/0xef0
#2: c0000003fa99d4e0 (&cpuctx_lock){-...}-{2:2}, at: perf_event_exec+0x290/0x510
#3: c000000017ab8418 (&ctx->lock){....}-{2:2}, at: perf_event_exec+0x29c/0x510
irq event stamp: 4806
hardirqs last enabled at (4805): [<c000000000f65b94>] _raw_spin_unlock_irqrestore+0x94/0xd0
hardirqs last disabled at (4806): [<c0000000003fae44>] perf_event_exec+0x394/0x510
softirqs last enabled at (0): [<c00000000013c404>] copy_process+0xc34/0x1ff0
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 36 PID: 2869 Comm: perf-exec Not tainted 6.2.0-rc2-00011-g1247637727f2 #61
Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV
Call Trace:
dump_stack_lvl+0x98/0xe0 (unreliable)
__might_resched+0x2f8/0x310
__mutex_lock+0x6c/0x13f0
thread_imc_event_add+0xf4/0x1b0
event_sched_in+0xe0/0x210
merge_sched_in+0x1f0/0x600
visit_groups_merge.isra.92.constprop.166+0x2bc/0x6c0
ctx_flexible_sched_in+0xcc/0x140
ctx_sched_in+0x20c/0x2a0
ctx_resched+0x104/0x1c0
perf_event_exec+0x340/0x510
begin_new_exec+0x730/0xef0
load_elf_binary+0x3f8/0x1e10
...
do not call blocking ops when !TASK_RUNNING; state=2001 set at [<00000000fd63e7cf>] do_nanosleep+0x60/0x1a0
WARNING: CPU: 36 PID: 2869 at kernel/sched/core.c:9912 __might_sleep+0x9c/0xb0
CPU: 36 PID: 2869 Comm: sleep Tainted: G W 6.2.0-rc2-00011-g1247637727f2 #61
Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV
NIP: c000000000194a1c LR: c000000000194a18 CTR: c000000000a78670
REGS: c00000004d2134e0 TRAP: 0700 Tainted: G W (6.2.0-rc2-00011-g1247637727f2)
MSR: 9000000000021033 <SF,HV,ME,IR,DR,RI,LE> CR: 48002824 XER: 00000000
CFAR: c00000000013fb64 IRQMASK: 1
The above warning triggered because the current imc-pmu code uses mutex
lock in interrupt disabled sections. The function mutex_lock()
internally calls __might_resched(), which will check if IRQs are
disabled and in case IRQs are disabled, it will trigger the warning.
Fix the issue by changing the mutex lock to spinlock.
[mpe: Fix comments, trim oops in change log, add reported-by tags] |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device
ethnl_req_get_phydev() is used to lookup a phy_device, in the case an
ethtool netlink command targets a specific phydev within a netdev's
topology.
It takes as a parameter a const struct nlattr *header that's used for
error handling :
if (!phydev) {
NL_SET_ERR_MSG_ATTR(extack, header,
"no phy matching phyindex");
return ERR_PTR(-ENODEV);
}
In the notify path after a ->set operation however, there's no request
attributes available.
The typical callsite for the above function looks like:
phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_XXX_HEADER],
info->extack);
So, when tb is NULL (such as in the ethnl notify path), we have a nice
crash.
It turns out that there's only the PLCA command that is in that case, as
the other phydev-specific commands don't have a notification.
This commit fixes the crash by passing the cmd index and the nlattr
array separately, allowing NULL-checking it directly inside the helper. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: memory-failure: update ttu flag inside unmap_poisoned_folio
Patch series "mm: memory_failure: unmap poisoned folio during migrate
properly", v3.
Fix two bugs during folio migration if the folio is poisoned.
This patch (of 3):
Commit 6da6b1d4a7df ("mm/hwpoison: convert TTU_IGNORE_HWPOISON to
TTU_HWPOISON") introduce TTU_HWPOISON to replace TTU_IGNORE_HWPOISON in
order to stop send SIGBUS signal when accessing an error page after a
memory error on a clean folio. However during page migration, anon folio
must be set with TTU_HWPOISON during unmap_*(). For pagecache we need
some policy just like the one in hwpoison_user_mappings to set this flag.
So move this policy from hwpoison_user_mappings to unmap_poisoned_folio to
handle this warning properly.
Warning will be produced during unamp poison folio with the following log:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 365 at mm/rmap.c:1847 try_to_unmap_one+0x8fc/0xd3c
Modules linked in:
CPU: 1 UID: 0 PID: 365 Comm: bash Tainted: G W 6.13.0-rc1-00018-gacdb4bbda7ab #42
Tainted: [W]=WARN
Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : try_to_unmap_one+0x8fc/0xd3c
lr : try_to_unmap_one+0x3dc/0xd3c
Call trace:
try_to_unmap_one+0x8fc/0xd3c (P)
try_to_unmap_one+0x3dc/0xd3c (L)
rmap_walk_anon+0xdc/0x1f8
rmap_walk+0x3c/0x58
try_to_unmap+0x88/0x90
unmap_poisoned_folio+0x30/0xa8
do_migrate_range+0x4a0/0x568
offline_pages+0x5a4/0x670
memory_block_action+0x17c/0x374
memory_subsys_offline+0x3c/0x78
device_offline+0xa4/0xd0
state_store+0x8c/0xf0
dev_attr_store+0x18/0x2c
sysfs_kf_write+0x44/0x54
kernfs_fop_write_iter+0x118/0x1a8
vfs_write+0x3a8/0x4bc
ksys_write+0x6c/0xf8
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x44/0x100
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x30/0xd0
el0t_64_sync_handler+0xc8/0xcc
el0t_64_sync+0x198/0x19c
---[ end trace 0000000000000000 ]---
[mawupeng1@huawei.com: unmap_poisoned_folio(): remove shadowed local `mapping', per Miaohe] |
| Server-Side Request Forgery (SSRF) vulnerability in Salesforce Tableau Server on Windows, Linux (Flow Data Source modules) allows Resource Location Spoofing. This issue affects Tableau Server: before 2025.1.3, before 2024.2.12, before 2023.3.19. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: misc_minor_alloc to use ida for all dynamic/misc dynamic minors
misc_minor_alloc was allocating id using ida for minor only in case of
MISC_DYNAMIC_MINOR but misc_minor_free was always freeing ids
using ida_free causing a mismatch and following warn:
> > WARNING: CPU: 0 PID: 159 at lib/idr.c:525 ida_free+0x3e0/0x41f
> > ida_free called for id=127 which is not allocated.
> > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
...
> > [<60941eb4>] ida_free+0x3e0/0x41f
> > [<605ac993>] misc_minor_free+0x3e/0xbc
> > [<605acb82>] misc_deregister+0x171/0x1b3
misc_minor_alloc is changed to allocate id from ida for all minors
falling in the range of dynamic/ misc dynamic minors |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix peer devlink set for SF representor devlink port
The cited patch change register devlink flow, and neglect to reflect
the changes for peer devlink set logic. Peer devlink set is
triggering a call trace if done after devl_register.[1]
Hence, align peer devlink set logic with register devlink flow.
[1]
WARNING: CPU: 4 PID: 3394 at net/devlink/core.c:155 devlink_rel_nested_in_add+0x177/0x180
CPU: 4 PID: 3394 Comm: kworker/u40:1 Not tainted 6.9.0-rc4_for_linust_min_debug_2024_04_16_14_08 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5_vhca_event0 mlx5_vhca_state_work_handler [mlx5_core]
RIP: 0010:devlink_rel_nested_in_add+0x177/0x180
Call Trace:
<TASK>
? __warn+0x78/0x120
? devlink_rel_nested_in_add+0x177/0x180
? report_bug+0x16d/0x180
? handle_bug+0x3c/0x60
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? devlink_port_init+0x30/0x30
? devlink_port_type_clear+0x50/0x50
? devlink_rel_nested_in_add+0x177/0x180
? devlink_rel_nested_in_add+0xdd/0x180
mlx5_sf_mdev_event+0x74/0xb0 [mlx5_core]
notifier_call_chain+0x35/0xb0
blocking_notifier_call_chain+0x3d/0x60
mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core]
mlx5_sf_dev_probe+0x185/0x3e0 [mlx5_core]
auxiliary_bus_probe+0x38/0x80
? driver_sysfs_add+0x51/0x80
really_probe+0xc5/0x3a0
? driver_probe_device+0x90/0x90
__driver_probe_device+0x80/0x160
driver_probe_device+0x1e/0x90
__device_attach_driver+0x7d/0x100
bus_for_each_drv+0x80/0xd0
__device_attach+0xbc/0x1f0
bus_probe_device+0x86/0xa0
device_add+0x64f/0x860
__auxiliary_device_add+0x3b/0xa0
mlx5_sf_dev_add+0x139/0x330 [mlx5_core]
mlx5_sf_dev_state_change_handler+0x1e4/0x250 [mlx5_core]
notifier_call_chain+0x35/0xb0
blocking_notifier_call_chain+0x3d/0x60
mlx5_vhca_state_work_handler+0x151/0x200 [mlx5_core]
process_one_work+0x13f/0x2e0
worker_thread+0x2bd/0x3c0
? rescuer_thread+0x410/0x410
kthread+0xc4/0xf0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x2d/0x50
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
media: nuvoton: Fix an error check in npcm_video_ece_init()
When function of_find_device_by_node() fails, it returns NULL instead of
an error code. So the corresponding error check logic should be modified
to check whether the return value is NULL and set the error code to be
returned as -ENODEV. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: move the EST lock to struct stmmac_priv
Reinitialize the whole EST structure would also reset the mutex
lock which is embedded in the EST structure, and then trigger
the following warning. To address this, move the lock to struct
stmmac_priv. We also need to reacquire the mutex lock when doing
this initialization.
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 3 PID: 505 at kernel/locking/mutex.c:587 __mutex_lock+0xd84/0x1068
Modules linked in:
CPU: 3 PID: 505 Comm: tc Not tainted 6.9.0-rc6-00053-g0106679839f7-dirty #29
Hardware name: NXP i.MX8MPlus EVK board (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __mutex_lock+0xd84/0x1068
lr : __mutex_lock+0xd84/0x1068
sp : ffffffc0864e3570
x29: ffffffc0864e3570 x28: ffffffc0817bdc78 x27: 0000000000000003
x26: ffffff80c54f1808 x25: ffffff80c9164080 x24: ffffffc080d723ac
x23: 0000000000000000 x22: 0000000000000002 x21: 0000000000000000
x20: 0000000000000000 x19: ffffffc083bc3000 x18: ffffffffffffffff
x17: ffffffc08117b080 x16: 0000000000000002 x15: ffffff80d2d40000
x14: 00000000000002da x13: ffffff80d2d404b8 x12: ffffffc082b5a5c8
x11: ffffffc082bca680 x10: ffffffc082bb2640 x9 : ffffffc082bb2698
x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000000001
x5 : ffffff8178fe0d48 x4 : 0000000000000000 x3 : 0000000000000027
x2 : ffffff8178fe0d50 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
__mutex_lock+0xd84/0x1068
mutex_lock_nested+0x28/0x34
tc_setup_taprio+0x118/0x68c
stmmac_setup_tc+0x50/0xf0
taprio_change+0x868/0xc9c |
| IBM Sterling Connect:Direct Web Services 6.0, 6.1, 6.2, and 6.3 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Salesforce Tableau Server on Windows, Linux (tabdoc api - duplicate-data-source modules) allows Absolute Path Traversal. This issue affects Tableau Server: before 2025.1.3, before 2024.2.12, before 2023.3.19. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Salesforce Tableau Server on Windows, Linux (abdoc api - create-data-source-from-file-upload modules) allows Absolute Path Traversal.This issue affects Tableau Server: before 2025.1.3, before 2024.2.12, before 2023.3.19. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: hyperv_fb: Fix hang in kdump kernel when on Hyper-V Gen 2 VMs
Gen 2 Hyper-V VMs boot via EFI and have a standard EFI framebuffer
device. When the kdump kernel runs in such a VM, loading the efifb
driver may hang because of accessing the framebuffer at the wrong
memory address.
The scenario occurs when the hyperv_fb driver in the original kernel
moves the framebuffer to a different MMIO address because of conflicts
with an already-running efifb or simplefb driver. The hyperv_fb driver
then informs Hyper-V of the change, which is allowed by the Hyper-V FB
VMBus device protocol. However, when the kexec command loads the kdump
kernel into crash memory via the kexec_file_load() system call, the
system call doesn't know the framebuffer has moved, and it sets up the
kdump screen_info using the original framebuffer address. The transition
to the kdump kernel does not go through the Hyper-V host, so Hyper-V
does not reset the framebuffer address like it would do on a reboot.
When efifb tries to run, it accesses a non-existent framebuffer
address, which traps to the Hyper-V host. After many such accesses,
the Hyper-V host thinks the guest is being malicious, and throttles
the guest to the point that it runs very slowly or appears to have hung.
When the kdump kernel is loaded into crash memory via the kexec_load()
system call, the problem does not occur. In this case, the kexec command
builds the screen_info table itself in user space from data returned
by the FBIOGET_FSCREENINFO ioctl against /dev/fb0, which gives it the
new framebuffer location.
This problem was originally reported in 2020 [1], resulting in commit
3cb73bc3fa2a ("hyperv_fb: Update screen_info after removing old
framebuffer"). This commit solved the problem by setting orig_video_isVGA
to 0, so the kdump kernel was unaware of the EFI framebuffer. The efifb
driver did not try to load, and no hang occurred. But in 2024, commit
c25a19afb81c ("fbdev/hyperv_fb: Do not clear global screen_info")
effectively reverted 3cb73bc3fa2a. Commit c25a19afb81c has no reference
to 3cb73bc3fa2a, so perhaps it was done without knowing the implications
that were reported with 3cb73bc3fa2a. In any case, as of commit
c25a19afb81c, the original problem came back again.
Interestingly, the hyperv_drm driver does not have this problem because
it never moves the framebuffer. The difference is that the hyperv_drm
driver removes any conflicting framebuffers *before* allocating an MMIO
address, while the hyperv_fb drivers removes conflicting framebuffers
*after* allocating an MMIO address. With the "after" ordering, hyperv_fb
may encounter a conflict and move the framebuffer to a different MMIO
address. But the conflict is essentially bogus because it is removed
a few lines of code later.
Rather than fix the problem with the approach from 2020 in commit
3cb73bc3fa2a, instead slightly reorder the steps in hyperv_fb so
conflicting framebuffers are removed before allocating an MMIO address.
Then the default framebuffer MMIO address should always be available, and
there's never any confusion about which framebuffer address the kdump
kernel should use -- it's always the original address provided by
the Hyper-V host. This approach is already used by the hyperv_drm
driver, and is consistent with the usage guidelines at the head of
the module with the function aperture_remove_conflicting_devices().
This approach also solves a related minor problem when kexec_load()
is used to load the kdump kernel. With current code, unbinding and
rebinding the hyperv_fb driver could result in the framebuffer moving
back to the default framebuffer address, because on the rebind there
are no conflicts. If such a move is done after the kdump kernel is
loaded with the new framebuffer address, at kdump time it could again
have the wrong address.
This problem and fix are described in terms of the kdump kernel, but
it can also occur
---truncated--- |
| VMware Workspace One Access, Access Connector, Identity Manager, and Identity Manager Connector address have a command injection vulnerability. |
| VMware Workspace ONE Access and Identity Manager contain a remote code execution vulnerability due to server-side template injection. A malicious actor with network access can trigger a server-side template injection that may result in remote code execution. |
| VMware Workspace ONE Access, Identity Manager and vRealize Automation contain a privilege escalation vulnerability due to improper permissions in support scripts. A malicious actor with local access can escalate privileges to 'root'. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix extent range end unlock in cow_file_range()
Running generic/751 on the for-next branch often results in a hang like
below. They are both stack by locking an extent. This suggests someone
forget to unlock an extent.
INFO: task kworker/u128:1:12 blocked for more than 323 seconds.
Not tainted 6.13.0-BTRFS-ZNS+ #503
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u128:1 state:D stack:0 pid:12 tgid:12 ppid:2 flags:0x00004000
Workqueue: btrfs-fixup btrfs_work_helper [btrfs]
Call Trace:
<TASK>
__schedule+0x534/0xdd0
schedule+0x39/0x140
__lock_extent+0x31b/0x380 [btrfs]
? __pfx_autoremove_wake_function+0x10/0x10
btrfs_writepage_fixup_worker+0xf1/0x3a0 [btrfs]
btrfs_work_helper+0xff/0x480 [btrfs]
? lock_release+0x178/0x2c0
process_one_work+0x1ee/0x570
? srso_return_thunk+0x5/0x5f
worker_thread+0x1d1/0x3b0
? __pfx_worker_thread+0x10/0x10
kthread+0x10b/0x230
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
INFO: task kworker/u134:0:184 blocked for more than 323 seconds.
Not tainted 6.13.0-BTRFS-ZNS+ #503
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u134:0 state:D stack:0 pid:184 tgid:184 ppid:2 flags:0x00004000
Workqueue: writeback wb_workfn (flush-btrfs-4)
Call Trace:
<TASK>
__schedule+0x534/0xdd0
schedule+0x39/0x140
__lock_extent+0x31b/0x380 [btrfs]
? __pfx_autoremove_wake_function+0x10/0x10
find_lock_delalloc_range+0xdb/0x260 [btrfs]
writepage_delalloc+0x12f/0x500 [btrfs]
? srso_return_thunk+0x5/0x5f
extent_write_cache_pages+0x232/0x840 [btrfs]
btrfs_writepages+0x72/0x130 [btrfs]
do_writepages+0xe7/0x260
? srso_return_thunk+0x5/0x5f
? lock_acquire+0xd2/0x300
? srso_return_thunk+0x5/0x5f
? find_held_lock+0x2b/0x80
? wbc_attach_and_unlock_inode.part.0+0x102/0x250
? wbc_attach_and_unlock_inode.part.0+0x102/0x250
__writeback_single_inode+0x5c/0x4b0
writeback_sb_inodes+0x22d/0x550
__writeback_inodes_wb+0x4c/0xe0
wb_writeback+0x2f6/0x3f0
wb_workfn+0x32a/0x510
process_one_work+0x1ee/0x570
? srso_return_thunk+0x5/0x5f
worker_thread+0x1d1/0x3b0
? __pfx_worker_thread+0x10/0x10
kthread+0x10b/0x230
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
This happens because we have another success path for the zoned mode. When
there is no active zone available, btrfs_reserve_extent() returns
-EAGAIN. In this case, we have two reactions.
(1) If the given range is never allocated, we can only wait for someone
to finish a zone, so wait on BTRFS_FS_NEED_ZONE_FINISH bit and retry
afterward.
(2) Or, if some allocations are already done, we must bail out and let
the caller to send IOs for the allocation. This is because these IOs
may be necessary to finish a zone.
The commit 06f364284794 ("btrfs: do proper folio cleanup when
cow_file_range() failed") moved the unlock code from the inside of the
loop to the outside. So, previously, the allocated extents are unlocked
just after the allocation and so before returning from the function.
However, they are no longer unlocked on the case (2) above. That caused
the hang issue.
Fix the issue by modifying the 'end' to the end of the allocated
range. Then, we can exit the loop and the same unlock code can properly
handle the case. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: corsair-void: Update power supply values with a unified work handler
corsair_void_process_receiver can be called from an interrupt context,
locking battery_mutex in it was causing a kernel panic.
Fix it by moving the critical section into its own work, sharing this
work with battery_add_work and battery_remove_work to remove the need
for any locking |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: init return value in amdgpu_ttm_clear_buffer
Otherwise an uninitialized value can be returned if
amdgpu_res_cleared returns true for all regions.
Possibly closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3812
(cherry picked from commit 7c62aacc3b452f73a1284198c81551035fac6d71) |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab/kvfree_rcu: Switch to WQ_MEM_RECLAIM wq
Currently kvfree_rcu() APIs use a system workqueue which is
"system_unbound_wq" to driver RCU machinery to reclaim a memory.
Recently, it has been noted that the following kernel warning can
be observed:
<snip>
workqueue: WQ_MEM_RECLAIM nvme-wq:nvme_scan_work is flushing !WQ_MEM_RECLAIM events_unbound:kfree_rcu_work
WARNING: CPU: 21 PID: 330 at kernel/workqueue.c:3719 check_flush_dependency+0x112/0x120
Modules linked in: intel_uncore_frequency(E) intel_uncore_frequency_common(E) skx_edac(E) ...
CPU: 21 UID: 0 PID: 330 Comm: kworker/u144:6 Tainted: G E 6.13.2-0_g925d379822da #1
Hardware name: Wiwynn Twin Lakes MP/Twin Lakes Passive MP, BIOS YMM20 02/01/2023
Workqueue: nvme-wq nvme_scan_work
RIP: 0010:check_flush_dependency+0x112/0x120
Code: 05 9a 40 14 02 01 48 81 c6 c0 00 00 00 48 8b 50 18 48 81 c7 c0 00 00 00 48 89 f9 48 ...
RSP: 0018:ffffc90000df7bd8 EFLAGS: 00010082
RAX: 000000000000006a RBX: ffffffff81622390 RCX: 0000000000000027
RDX: 00000000fffeffff RSI: 000000000057ffa8 RDI: ffff88907f960c88
RBP: 0000000000000000 R08: ffffffff83068e50 R09: 000000000002fffd
R10: 0000000000000004 R11: 0000000000000000 R12: ffff8881001a4400
R13: 0000000000000000 R14: ffff88907f420fb8 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88907f940000(0000) knlGS:0000000000000000
CR2: 00007f60c3001000 CR3: 000000107d010005 CR4: 00000000007726f0
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0xa4/0x140
? check_flush_dependency+0x112/0x120
? report_bug+0xe1/0x140
? check_flush_dependency+0x112/0x120
? handle_bug+0x5e/0x90
? exc_invalid_op+0x16/0x40
? asm_exc_invalid_op+0x16/0x20
? timer_recalc_next_expiry+0x190/0x190
? check_flush_dependency+0x112/0x120
? check_flush_dependency+0x112/0x120
__flush_work.llvm.1643880146586177030+0x174/0x2c0
flush_rcu_work+0x28/0x30
kvfree_rcu_barrier+0x12f/0x160
kmem_cache_destroy+0x18/0x120
bioset_exit+0x10c/0x150
disk_release.llvm.6740012984264378178+0x61/0xd0
device_release+0x4f/0x90
kobject_put+0x95/0x180
nvme_put_ns+0x23/0xc0
nvme_remove_invalid_namespaces+0xb3/0xd0
nvme_scan_work+0x342/0x490
process_scheduled_works+0x1a2/0x370
worker_thread+0x2ff/0x390
? pwq_release_workfn+0x1e0/0x1e0
kthread+0xb1/0xe0
? __kthread_parkme+0x70/0x70
ret_from_fork+0x30/0x40
? __kthread_parkme+0x70/0x70
ret_from_fork_asm+0x11/0x20
</TASK>
---[ end trace 0000000000000000 ]---
<snip>
To address this switch to use of independent WQ_MEM_RECLAIM
workqueue, so the rules are not violated from workqueue framework
point of view.
Apart of that, since kvfree_rcu() does reclaim memory it is worth
to go with WQ_MEM_RECLAIM type of wq because it is designed for
this purpose. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/uffd: fix pte marker when fork() without fork event
Patch series "mm: Fixes on pte markers".
Patch 1 resolves the syzkiller report from Pengfei.
Patch 2 further harden pte markers when used with the recent swapin error
markers. The major case is we should persist a swapin error marker after
fork(), so child shouldn't read a corrupted page.
This patch (of 2):
When fork(), dst_vma is not guaranteed to have VM_UFFD_WP even if src may
have it and has pte marker installed. The warning is improper along with
the comment. The right thing is to inherit the pte marker when needed, or
keep the dst pte empty.
A vague guess is this happened by an accident when there's the prior patch
to introduce src/dst vma into this helper during the uffd-wp feature got
developed and I probably messed up in the rebase, since if we replace
dst_vma with src_vma the warning & comment it all makes sense too.
Hugetlb did exactly the right here (copy_hugetlb_page_range()). Fix the
general path.
Reproducer:
https://github.com/xupengfe/syzkaller_logs/blob/main/221208_115556_copy_page_range/repro.c
Bugzilla report: https://bugzilla.kernel.org/show_bug.cgi?id=216808 |
