| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix rq-qos breakage from skipping rq_qos_done_bio()
a647a524a467 ("block: don't call rq_qos_ops->done_bio if the bio isn't
tracked") made bio_endio() skip rq_qos_done_bio() if BIO_TRACKED is not set.
While this fixed a potential oops, it also broke blk-iocost by skipping the
done_bio callback for merged bios.
Before, whether a bio goes through rq_qos_throttle() or rq_qos_merge(),
rq_qos_done_bio() would be called on the bio on completion with BIO_TRACKED
distinguishing the former from the latter. rq_qos_done_bio() is not called
for bios which wenth through rq_qos_merge(). This royally confuses
blk-iocost as the merged bios never finish and are considered perpetually
in-flight.
One reliably reproducible failure mode is an intermediate cgroup geting
stuck active preventing its children from being activated due to the
leaf-only rule, leading to loss of control. The following is from
resctl-bench protection scenario which emulates isolating a web server like
workload from a memory bomb run on an iocost configuration which should
yield a reasonable level of protection.
# cat /sys/block/nvme2n1/device/model
Samsung SSD 970 PRO 512GB
# cat /sys/fs/cgroup/io.cost.model
259:0 ctrl=user model=linear rbps=834913556 rseqiops=93622 rrandiops=102913 wbps=618985353 wseqiops=72325 wrandiops=71025
# cat /sys/fs/cgroup/io.cost.qos
259:0 enable=1 ctrl=user rpct=95.00 rlat=18776 wpct=95.00 wlat=8897 min=60.00 max=100.00
# resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1
...
Memory Hog Summary
==================
IO Latency: R p50=242u:336u/2.5m p90=794u:1.4m/7.5m p99=2.7m:8.0m/62.5m max=8.0m:36.4m/350m
W p50=221u:323u/1.5m p90=709u:1.2m/5.5m p99=1.5m:2.5m/9.5m max=6.9m:35.9m/350m
Isolation and Request Latency Impact Distributions:
min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev
isol% 15.90 15.90 15.90 40.05 57.24 59.07 60.01 74.63 74.63 90.35 90.35 58.12 15.82
lat-imp% 0 0 0 0 0 4.55 14.68 15.54 233.5 548.1 548.1 53.88 143.6
Result: isol=58.12:15.82% lat_imp=53.88%:143.6 work_csv=100.0% missing=3.96%
The isolation result of 58.12% is close to what this device would show
without any IO control.
Fix it by introducing a new flag BIO_QOS_MERGED to mark merged bios and
calling rq_qos_done_bio() on them too. For consistency and clarity, rename
BIO_TRACKED to BIO_QOS_THROTTLED. The flag checks are moved into
rq_qos_done_bio() so that it's next to the code paths that set the flags.
With the patch applied, the above same benchmark shows:
# resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1
...
Memory Hog Summary
==================
IO Latency: R p50=123u:84.4u/985u p90=322u:256u/2.5m p99=1.6m:1.4m/9.5m max=11.1m:36.0m/350m
W p50=429u:274u/995u p90=1.7m:1.3m/4.5m p99=3.4m:2.7m/11.5m max=7.9m:5.9m/26.5m
Isolation and Request Latency Impact Distributions:
min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev
isol% 84.91 84.91 89.51 90.73 92.31 94.49 96.36 98.04 98.71 100.0 100.0 94.42 2.81
lat-imp% 0 0 0 0 0 2.81 5.73 11.11 13.92 17.53 22.61 4.10 4.68
Result: isol=94.42:2.81% lat_imp=4.10%:4.68 work_csv=58.34% missing=0% |
| In the Linux kernel, the following vulnerability has been resolved:
can: isotp: sanitize CAN ID checks in isotp_bind()
Syzbot created an environment that lead to a state machine status that
can not be reached with a compliant CAN ID address configuration.
The provided address information consisted of CAN ID 0x6000001 and 0xC28001
which both boil down to 11 bit CAN IDs 0x001 in sending and receiving.
Sanitize the SFF/EFF CAN ID values before performing the address checks. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: initialize registers in nft_do_chain()
Initialize registers to avoid stack leak into userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: host: Stop setting the ACPI companion
It is no longer needed. The sysdev pointer is now used when
assigning the ACPI companions to the xHCI ports and USB
devices.
Assigning the ACPI companion here resulted in the
fwnode->secondary pointer to be replaced also for the parent
dwc3 device since the primary fwnode (the ACPI companion)
was shared. That was unintentional and it created potential
side effects like resource leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
workqueue: Do not warn when cancelling WQ_MEM_RECLAIM work from !WQ_MEM_RECLAIM worker
After commit
746ae46c1113 ("drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM")
amdgpu started seeing the following warning:
[ ] workqueue: WQ_MEM_RECLAIM sdma0:drm_sched_run_job_work [gpu_sched] is flushing !WQ_MEM_RECLAIM events:amdgpu_device_delay_enable_gfx_off [amdgpu]
...
[ ] Workqueue: sdma0 drm_sched_run_job_work [gpu_sched]
...
[ ] Call Trace:
[ ] <TASK>
...
[ ] ? check_flush_dependency+0xf5/0x110
...
[ ] cancel_delayed_work_sync+0x6e/0x80
[ ] amdgpu_gfx_off_ctrl+0xab/0x140 [amdgpu]
[ ] amdgpu_ring_alloc+0x40/0x50 [amdgpu]
[ ] amdgpu_ib_schedule+0xf4/0x810 [amdgpu]
[ ] ? drm_sched_run_job_work+0x22c/0x430 [gpu_sched]
[ ] amdgpu_job_run+0xaa/0x1f0 [amdgpu]
[ ] drm_sched_run_job_work+0x257/0x430 [gpu_sched]
[ ] process_one_work+0x217/0x720
...
[ ] </TASK>
The intent of the verifcation done in check_flush_depedency is to ensure
forward progress during memory reclaim, by flagging cases when either a
memory reclaim process, or a memory reclaim work item is flushed from a
context not marked as memory reclaim safe.
This is correct when flushing, but when called from the
cancel(_delayed)_work_sync() paths it is a false positive because work is
either already running, or will not be running at all. Therefore
cancelling it is safe and we can relax the warning criteria by letting the
helper know of the calling context.
References: 746ae46c1113 ("drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM") |
| In the Linux kernel, the following vulnerability has been resolved:
net: micrel: Fix receiving the timestamp in the frame for lan8841
The blamed commit started to use the ptp workqueue to get the second
part of the timestamp. And when the port was set down, then this
workqueue is stopped. But if the config option NETWORK_PHY_TIMESTAMPING
is not enabled, then the ptp_clock is not initialized so then it would
crash when it would try to access the delayed work.
So then basically by setting up and then down the port, it would crash.
The fix consists in checking if the ptp_clock is initialized and only
then cancel the delayed work. |
| IBM InfoSphere Information Server 11.7 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in a stack trace. This information could be used in further attacks against the system. IBM X-Force ID: 231202. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix fault on fd close after unbind
If userspace holds an fd open, unbinds the device and then closes it,
the driver shouldn't try to access the hardware. Protect it by using
drm_dev_enter()/drm_dev_exit(). This fixes the following page fault:
<6> [IGT] xe_wedged: exiting, ret=98
<1> BUG: unable to handle page fault for address: ffffc901bc5e508c
<1> #PF: supervisor read access in kernel mode
<1> #PF: error_code(0x0000) - not-present page
...
<4> xe_lrc_update_timestamp+0x1c/0xd0 [xe]
<4> xe_exec_queue_update_run_ticks+0x50/0xb0 [xe]
<4> xe_exec_queue_fini+0x16/0xb0 [xe]
<4> __guc_exec_queue_fini_async+0xc4/0x190 [xe]
<4> guc_exec_queue_fini_async+0xa0/0xe0 [xe]
<4> guc_exec_queue_fini+0x23/0x40 [xe]
<4> xe_exec_queue_destroy+0xb3/0xf0 [xe]
<4> xe_file_close+0xd4/0x1a0 [xe]
<4> drm_file_free+0x210/0x280 [drm]
<4> drm_close_helper.isra.0+0x6d/0x80 [drm]
<4> drm_release_noglobal+0x20/0x90 [drm]
(cherry picked from commit 4ca1fd418338d4d135428a0eb1e16e3b3ce17ee8) |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: sof_sdw: Add space for a terminator into DAIs array
The code uses the initialised member of the asoc_sdw_dailink struct to
determine if a member of the array is in use. However in the case the
array is completely full this will lead to an access 1 past the end of
the array, expand the array by one entry to include a space for a
terminator. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: iso: Always release hdev at the end of iso_listen_bis
Since hci_get_route holds the device before returning, the hdev
should be released with hci_dev_put at the end of iso_listen_bis
even if the function returns with an error. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "readahead: properly shorten readahead when falling back to do_page_cache_ra()"
This reverts commit 7c877586da3178974a8a94577b6045a48377ff25.
Anders and Philippe have reported that recent kernels occasionally hang
when used with NFS in readahead code. The problem has been bisected to
7c877586da3 ("readahead: properly shorten readahead when falling back to
do_page_cache_ra()"). The cause of the problem is that ra->size can be
shrunk by read_pages() call and subsequently we end up calling
do_page_cache_ra() with negative (read huge positive) number of pages.
Let's revert 7c877586da3 for now until we can find a proper way how the
logic in read_pages() and page_cache_ra_order() can coexist. This can
lead to reduced readahead throughput due to readahead window confusion but
that's better than outright hangs. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix invalid irq restore in scx_ops_bypass()
While adding outer irqsave/restore locking, 0e7ffff1b811 ("scx: Fix raciness
in scx_ops_bypass()") forgot to convert an inner rq_unlock_irqrestore() to
rq_unlock() which could re-enable IRQ prematurely leading to the following
warning:
raw_local_irq_restore() called with IRQs enabled
WARNING: CPU: 1 PID: 96 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x30/0x40
...
Sched_ext: create_dsq (enabling)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : warn_bogus_irq_restore+0x30/0x40
lr : warn_bogus_irq_restore+0x30/0x40
...
Call trace:
warn_bogus_irq_restore+0x30/0x40 (P)
warn_bogus_irq_restore+0x30/0x40 (L)
scx_ops_bypass+0x224/0x3b8
scx_ops_enable.isra.0+0x2c8/0xaa8
bpf_scx_reg+0x18/0x30
...
irq event stamp: 33739
hardirqs last enabled at (33739): [<ffff8000800b699c>] scx_ops_bypass+0x174/0x3b8
hardirqs last disabled at (33738): [<ffff800080d48ad4>] _raw_spin_lock_irqsave+0xb4/0xd8
Drop the stray _irqrestore(). |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: hda-dai: Do not release the link DMA on STOP
The linkDMA should not be released on stop trigger since a stream re-start
might happen without closing of the stream. This leaves a short time for
other streams to 'steal' the linkDMA since it has been released.
This issue is not easy to reproduce under normal conditions as usually
after stop the stream is closed, or the same stream is restarted, but if
another stream got in between the stop and start, like this:
aplay -Dhw:0,3 -c2 -r48000 -fS32_LE /dev/zero -d 120
CTRL+z
aplay -Dhw:0,0 -c2 -r48000 -fS32_LE /dev/zero -d 120
then the link DMA channels will be mixed up, resulting firmware error or
crash. |
| NVIDIA Riva contains a vulnerability where a user could cause an improper access control issue. A successful exploit of this vulnerability might lead to escalation of privileges, data tampering, denial of service, or information disclosure. |
| NVIDIA Riva contains a vulnerability where a user could cause an improper access control issue. A successful exploit of this vulnerability might lead to data tampering or denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: don't auto enable misc vector
Currently, there is a time window between misc irq enabled
and service task inited. If an interrupte is reported at
this time, it will cause warning like below:
[ 16.324639] Call trace:
[ 16.324641] __queue_delayed_work+0xb8/0xe0
[ 16.324643] mod_delayed_work_on+0x78/0xd0
[ 16.324655] hclge_errhand_task_schedule+0x58/0x90 [hclge]
[ 16.324662] hclge_misc_irq_handle+0x168/0x240 [hclge]
[ 16.324666] __handle_irq_event_percpu+0x64/0x1e0
[ 16.324667] handle_irq_event+0x80/0x170
[ 16.324670] handle_fasteoi_edge_irq+0x110/0x2bc
[ 16.324671] __handle_domain_irq+0x84/0xfc
[ 16.324673] gic_handle_irq+0x88/0x2c0
[ 16.324674] el1_irq+0xb8/0x140
[ 16.324677] arch_cpu_idle+0x18/0x40
[ 16.324679] default_idle_call+0x5c/0x1bc
[ 16.324682] cpuidle_idle_call+0x18c/0x1c4
[ 16.324684] do_idle+0x174/0x17c
[ 16.324685] cpu_startup_entry+0x30/0x6c
[ 16.324687] secondary_start_kernel+0x1a4/0x280
[ 16.324688] ---[ end trace 6aa0bff672a964aa ]---
So don't auto enable misc vector when request irq.. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix kernel async DIO
Netfslib needs to be able to handle kernel-initiated asynchronous DIO that
is supplied with a bio_vec[] array. Currently, because of the async flag,
this gets passed to netfs_extract_user_iter() which throws a warning and
fails because it only handles IOVEC and UBUF iterators. This can be
triggered through a combination of cifs and a loopback blockdev with
something like:
mount //my/cifs/share /foo
dd if=/dev/zero of=/foo/m0 bs=4K count=1K
losetup --sector-size 4096 --direct-io=on /dev/loop2046 /foo/m0
echo hello >/dev/loop2046
This causes the following to appear in syslog:
WARNING: CPU: 2 PID: 109 at fs/netfs/iterator.c:50 netfs_extract_user_iter+0x170/0x250 [netfs]
and the write to fail.
Fix this by removing the check in netfs_unbuffered_write_iter_locked() that
causes async kernel DIO writes to be handled as userspace writes. Note
that this change relies on the kernel caller maintaining the existence of
the bio_vec array (or kvec[] or folio_queue) until the op is complete. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: memalloc: prefer dma_mapping_error() over explicit address checking
With CONFIG_DMA_API_DEBUG enabled, the following warning is observed:
DMA-API: snd_hda_intel 0000:03:00.1: device driver failed to check map error[device address=0x00000000ffff0000] [size=20480 bytes] [mapped as single]
WARNING: CPU: 28 PID: 2255 at kernel/dma/debug.c:1036 check_unmap+0x1408/0x2430
CPU: 28 UID: 42 PID: 2255 Comm: wireplumber Tainted: G W L 6.12.0-10-133577cad6bf48e5a7848c4338124081393bfe8a+ #759
debug_dma_unmap_page+0xe9/0xf0
snd_dma_wc_free+0x85/0x130 [snd_pcm]
snd_pcm_lib_free_pages+0x1e3/0x440 [snd_pcm]
snd_pcm_common_ioctl+0x1c9a/0x2960 [snd_pcm]
snd_pcm_ioctl+0x6a/0xc0 [snd_pcm]
...
Check for returned DMA addresses using specialized dma_mapping_error()
helper which is generally recommended for this purpose by
Documentation/core-api/dma-api.rst. |
| In Progress Chef Automate, versions earlier than 4.13.295, on Linux x86 platform, an authenticated attacker can gain access to Chef Automate restricted functionality in multiple services via improperly neutralized inputs used in an SQL command. |
| In Progress Chef Automate, versions earlier than 4.13.295, on Linux x86 platform, an authenticated attacker can gain access to Chef Automate restricted functionality in the compliance service via
improperly neutralized inputs used in an SQL command using a well-known token. |
