| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper input validation in Autofill in Google Chrome on on Android prior to 152.0.7977.65 allowed a remote attacker to obtain sensitive information via a crafted HTML page. (Chromium security severity: High) |
| Out of bounds write in ANGLE in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Use after free in Views in Google Chrome on on Mac prior to 152.0.7977.65 allowed a remote attacker to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Uncontrolled Resource Consumption vulnerability in Apache Tomcat via an allocation leak in the HTTP/2 backlog tracking when a stream is reset
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.39 through 9.0.120.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 8.5.59 through 8.5.100. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue. |
| Subscriber Broken Access Control in Push Notification for Post and BuddyPress <= 3.20 versions. |
| Use after free in Sessions in Google Chrome on on Android prior to 152.0.7977.65 allowed a remote attacker leveraging social engineering to execute arbitrary code outside the sandbox via UI Interaction. (Chromium security severity: Medium) |
| Buffer overflow in ANGLE in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Out of bounds write in ANGLE in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Improper input validation in Input in Google Chrome on on Android prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Insufficient Session Expiration vulnerability in Apache Tomcat meant that if the session ID for an authenticated HTTP session was changed after a WebSocket connection had been established under that authenticated HTTP session, the WebSokcet session would not be closed as required by the Jakarta WebSocket specification when the HTTP session ended.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 8.5.0 through 8.5.100, from 7.0.43 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue. |
| Incorrect authorization in Forms in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to obtain sensitive information via a crafted HTML page. (Chromium security severity: Low) |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Free all memory if cp_init() fails
The routine cp_free() is called to unpin/free any memory once an I/O
is completed successfully, or if cp_prefetch() fails. But if cp_init()
fails, and cp->initialized is not enabled, the same routine cannot be
used to free all the memory.
An attempt to address this exists in ccwchain_handle_ccw(), where a
single call to ccwchain_free() is made for the currently-processed
CCW segment. But this will leak other segments (created as a result
of a Transfer in Channel) that had been allocated as part of the same
channel program.
Address this by performing the cleanup outside of the recursive
ccwchain_handle_ccw()/ccwchain_loop_tic() logic. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: bounds-check buffer log item's dirty bitmap
xlog_recover_do_reg_buffer() replays each dirty region described by a
buffer log item's bitmap into the buffer read for that item:
memcpy(xfs_buf_offset(bp, (uint)bit << XFS_BLF_SHIFT),
item->ri_buf[i].iov_base,
nbits << XFS_BLF_SHIFT);
The destination offset (bit/nbits, from the logged dirty bitmap) and the
buffer size (from the logged blf_len) are both attacker-controlled and
otherwise unrelated, yet the only thing bounding the copy is an ASSERT(),
which compiles away on production kernels. A crafted image logging a
small blf_len together with a bitmap bit past the end of that buffer
drives the memcpy() past the buffer's allocation, corrupting adjacent
kernel heap during mount-time log recovery. This is reachable by anyone
who can get a crafted image mounted -- the malicious-filesystem threat
model XFS already guards against elsewhere.
Turn the ASSERT() into a real XFS_IS_CORRUPT() check that aborts recovery
of the buffer with -EFSCORRUPTED, consistent with the validate-and-fail
idiom already used in xlog_recover_do_inode_buffer() and
xfs_dquot_item_recover.c. xlog_recover_do_reg_buffer() therefore becomes
STATIC int and its three callers propagate the error.
Found and confirmed with KASAN on a CONFIG_XFS_DEBUG=n build: the crafted
image trips a slab-out-of-bounds write before this change and fails
recovery cleanly with -EFSCORRUPTED after it. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix ilock leak on error in xfs_dq_get_next_id
xfs_dq_get_next_id() takes the quota inode ILOCK before calling
xfs_iread_extents(). If xfs_iread_extents() fails, the function returns
immediately without releasing the lock, leaking the quota inode ILOCK.
This can leave the quota inode locked and cause subsequent quota
operations to hang.
Fix this by jumping to a common unlock path on error instead of returning
directly. |
| In the Linux kernel, the following vulnerability has been resolved:
packet: use consistent hard_header_len in TX_RING send path
tpacket_snd() reads dev->hard_header_len independently for skb
allocation and header construction in tpacket_fill_skb(). Concurrent
netdevice reconfiguration can therefore make the reserved headroom
smaller than the amount later pushed, or make copylen - hard_header_len
negative.
Snapshot hard_header_len once before processing ring frames and use it
for the frame limit, headroom allocation, copy length, and skb
construction. Pass the snapshot to tpacket_fill_skb().
The separate SOCK_DGRAM consistency problem between hard_header_len and
header_ops->create is not addressed here. |
| In the Linux kernel, the following vulnerability has been resolved:
packet: synchronize pressure clearing with ring reconfiguration
packet_set_ring() updates the RX ring state under sk_receive_queue.lock,
but used to publish the tpacket receive mode through po->prot_hook.func
after releasing that lock. packet_poll() and packet_recvmsg() can then
run the pressure clearing path after the ring has been cleared while
still seeing tpacket_rcv, causing __packet_rcv_has_room() to dereference
stale or NULL ring storage.
Move the existing receive hook assignment into the same
sk_receive_queue.lock section as the ring state update. Keep the
assignment otherwise unchanged, including on TX ring reconfiguration, to
avoid adding behavior changes that are not required for the fix.
Serialize packet_recvmsg() pressure clearing with the same queue lock
only after PACKET_SOCK_PRESSURE has been observed. If the flag is clear
and the socket has moved away from tpacket_rcv, packet_set_ring() has
already detached the socket and waited for synchronize_net(), so no new
packet input can set the flag again.
packet_poll() already holds sk_receive_queue.lock, so it uses the new
unlocked helper directly. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: reject overly deep qdisc hierarchies
Deep qdisc hierarchies can lead to excessive recursion in qdisc tree
walkers and exhaust the kernel stack. The existing loop check does not
cover the create-and-graft path, so a hierarchy can still be extended by
creating a new child qdisc below an already deep parent.
Store the hierarchy depth in struct Qdisc and update it when qdiscs are
grafted. Reject new child qdiscs once the parent is already at the maximum
allowed depth. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: frags: publish queues before arming timer
inet_frag_create() arms the fragment queue timer before inserting the
queue into the fqdir rhashtable. If the namespace fragment timeout is
zero or negative, the timer can run before the queue is published.
The timer callback then marks the queue complete, tries to remove a node
that is not in the hash table yet, and drops the anticipated hash
reference. Creation can subsequently publish the completed queue without
restoring that reference, leaving a stale hash node after the caller drops
the remaining reference.
Publish the queue first and arm the timer while holding the queue lock.
This makes timer expiry wait until the queue is visible in the hash table,
so inet_frag_kill() can remove the node and balance the hash reference. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: Fix fib_nlmsg_size() for RTA_VIA nexthops
fib_nlmsg_size() still estimates nexthop space as if every gateway is
encoded as an IPv4 RTA_GATEWAY attribute. IPv4 routes can also carry an
IPv6 gateway, which fib_nexthop_info() dumps as RTA_VIA.
As a result, route notifications can allocate an skb that is too small.
fib_dump_info() then fails with -EMSGSIZE and rtmsg_fib() hits the
WARN_ON() that marks such failures as a fib_nlmsg_size() bug. With
panic_on_warn set, this becomes a kernel panic.
Mirror the actual nexthop dump layout in fib_nlmsg_size(): account for
IPv6 nexthop gateways dumped as RTA_VIA, for the no-header rtnexthop
layout used inside RTA_MULTIPATH, and for RTA_FLOW only when it is
actually present. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: qcom-geni: fix TX DMA buffer flush
When transmit flushing a qcom-geni UART during an ongoing TX DMA, the
UART gets stuck infinitely repeating corrupted TX DMA frames.
The DMA-mode uart_ops does not provide a flush_buffer callback, so an
in-flight transfer can complete after serial core has reset the transmit
kfifo, underflowing its length and resubmitting page-sized transfers
indefinitely. Add one that stops the transfer and clears tx_remaining
and tx_queued.
The stop path was also broken: it unmapped the buffer while the serial
engine could still read it, and never reset the TX DMA state machine.
Cancel the main sequencer command first, then reset the state machine
and wait for it before unmapping. Drop the early return so a pending
mapping is also cleaned up when the main command is inactive.
The bug can be triggered from userspace with a large write immediately
followed by TCOFLUSH. A following tcdrain will hang forever. The bug was
reproduced and this fix was validated on Arduino Uno Q (QRB2210)
using /dev/ttyHS1. |
