| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: initialize le_tmp64 in rtw_BIP_verify()
Initialize le_tmp64 to zero in rtw_BIP_verify() to prevent using
uninitialized data.
Smatch warns that only 6 bytes are copied to this 8-byte (u64)
variable, leaving the last two bytes uninitialized:
drivers/staging/rtl8723bs/core/rtw_security.c:1308 rtw_BIP_verify()
warn: not copying enough bytes for '&le_tmp64' (8 vs 6 bytes)
Initializing the variable at the start of the function fixes this
warning and ensures predictable behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
NFC: digital: Bounds check NFC-A cascade depth in SDD response handler
The NFC-A anti-collision cascade in digital_in_recv_sdd_res() appends 3
or 4 bytes to target->nfcid1 on each round, but the number of cascade
rounds is controlled entirely by the peer device. The peer sets the
cascade tag in the SDD_RES (deciding 3 vs 4 bytes) and the
cascade-incomplete bit in the SEL_RES (deciding whether another round
follows).
ISO 14443-3 limits NFC-A to three cascade levels and target->nfcid1 is
sized accordingly (NFC_NFCID1_MAXSIZE = 10), but nothing in the driver
actually enforces this. This means a malicious peer can keep the
cascade running, writing past the heap-allocated nfc_target with each
round.
Fix this by rejecting the response when the accumulated UID would exceed
the buffer.
Commit e329e71013c9 ("NFC: nci: Bounds check struct nfc_target arrays")
fixed similar missing checks against the same field on the NCI path. |
| xrdp is an open source RDP server. Versions through 0.10.5 contain a heap-based buffer overflow vulnerability in its logon processing. In environments where domain_user_separator is configured in xrdp.ini, an unauthenticated remote attacker can send a crafted, excessively long username and domain name to overflow the internal buffer. This can corrupt adjacent memory regions, potentially leading to a Denial of Service (DoS) or unexpected behavior. The domain_name_separator directive is commented out by default, systems are not affected by this vulnerability unless it is intentionally configured. This issue has been fixed in version 0.10.6. |
| xrdp is an open source RDP server. Versions through 0.10.5 contain an out-of-bounds read vulnerability during the RDP capability exchange phase. The issue occurs when memory is accessed before validating the remaining buffer length. A remote, unauthenticated attacker can trigger this vulnerability by sending a specially crafted Confirm Active PDU. Successful exploitation could lead to a denial of service (process crash) or potential disclosure of sensitive information from the process memory. This issue has been fixed in version 0.10.6. |
| ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. Reason: This candidate was issued in error. Notes: All references and descriptions in this candidate have been removed to prevent accidental usage. |
| xrdp is an open source RDP server. Versions through 0.10.5 have a heap-based buffer overflow in the EGFX (graphics dynamic virtual channel) implementation due to insufficient validation of client-controlled size parameters, allowing an out-of-bounds write via crafted PDUs. Pre-authentication exploitation can crash the process, while post-authentication exploitation may achieve remote code execution. This issue has been fixed in version 0.10.6. If users are unable to immediately update, they should run xrdp as a non-privileged user (default since 0.10.2) to limit the impact of successful exploitation. |
| xrdp is an open source RDP server. Versions through 0.10.5 have an out-of-bounds read vulnerability in the pre-authentication RDP message parsing logic. A remote, unauthenticated attacker can trigger this flaw by sending a specially crafted sequence of packets during the initial connection phase. This vulnerability results from insufficient validation of input buffer lengths before processing dynamic channel communication. Successful exploitation can lead to a denial-of-service (DoS) condition via a process crash or potential disclosure of sensitive information from the service's memory space. This issue has been fixed in version 0.10.6. |
| xrdp is an open source RDP server. Versions through 0.10.5 allow an authenticated remote user to execute arbitrary commands on the server due to unsafe handling of the AlternateShell parameter in xrdp-sesman. When the AllowAlternateShell setting is enabled (which is the default when not explicitly configured), xrdp accepts a client-supplied AlternateShell value and executes it via /bin/sh -c during session initialization. This results in shell-interpreted execution of unsanitized, user-controlled input. This behavior effectively provides a scriptable remote command execution primitive over RDP within the security context of the authenticated user, occurring prior to normal window manager startup. This can bypass expected session initialization flows and operational assumptions that restrict execution to interactive desktop environments. This issue has been fixed in version 0.10.6. |
| NovumOS is a custom 32-bit operating system written in Zig and x86 Assembly. In versions prior to 0.24, Syscall 15 (MemoryMapRange) allows Ring 3 user-mode processes to map arbitrary virtual address ranges into their address space without validating against forbidden regions, including critical kernel structures such as the IDT, GDT, TSS, and page tables. A local attacker can exploit this to modify kernel interrupt handlers, resulting in privilege escalation from user mode to kernel context. This issue has been fixed in version 0.24. |
| Movary is a self hosted web app to track and rate a user's watched movies. Prior to version 0.71.1, an ordinary authenticated user can access the user-management endpoints `/settings/users` and use them to enumerate all users and create a new administrator account. This happens because the route definitions do not enforce admin-only middleware, and the controller-level authorization check uses a broken boolean condition. As a result, any user with a valid web session cookie can reach functionality that should be restricted to administrators. Version 0.71.1 patches the issue. |
| Movary is a self hosted web app to track and rate a user's watched movies. Prior to version 0.71.1, an ordinary authenticated user can escalate their own account to administrator by sending `isAdmin=true` to `PUT /settings/users/{userId}` for their own user ID. The endpoint is intended to let a user edit their own profile, but it updates the sensitive `isAdmin` field without any admin-only authorization check. Version 0.71.1 patches the issue. |
| NovumOS is a custom 32-bit operating system written in Zig and x86 Assembly. In versions prior to 0.24, Syscall 12 (JumpToUser) accepts an arbitrary entry point address from user-space registers without validation, allowing any Ring 3 user-mode process to jump to kernel addresses and execute arbitrary code in Ring 0 context, resulting in local privilege escalation. This issue has been fixed in version 0.24. If developers are unable to immediately update, they should restrict syscall access by running the system in single-user mode without Ring 3, and disable user-mode processes by only running kernel shell with no user processes. This issue has been fixed in version 0.24. |
| In the Linux kernel, the following vulnerability has been resolved:
igc: fix page fault in XDP TX timestamps handling
If an XDP application that requested TX timestamping is shutting down
while the link of the interface in use is still up the following kernel
splat is reported:
[ 883.803618] [ T1554] BUG: unable to handle page fault for address: ffffcfb6200fd008
...
[ 883.803650] [ T1554] Call Trace:
[ 883.803652] [ T1554] <TASK>
[ 883.803654] [ T1554] igc_ptp_tx_tstamp_event+0xdf/0x160 [igc]
[ 883.803660] [ T1554] igc_tsync_interrupt+0x2d5/0x300 [igc]
...
During shutdown of the TX ring the xsk_meta pointers are left behind, so
that the IRQ handler is trying to touch them.
This issue is now being fixed by cleaning up the stale xsk meta data on
TX shutdown. TX timestamps on other queues remain unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure
ieee80211_tx_prepare_skb() has three error paths, but only two of them
free the skb. The first error path (ieee80211_tx_prepare() returning
TX_DROP) does not free it, while invoke_tx_handlers() failure and the
fragmentation check both do.
Add kfree_skb() to the first error path so all three are consistent,
and remove the now-redundant frees in callers (ath9k, mt76,
mac80211_hwsim) to avoid double-free.
Document the skb ownership guarantee in the function's kdoc. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix race condition during IPSec ESN update
In IPSec full offload mode, the device reports an ESN (Extended
Sequence Number) wrap event to the driver. The driver validates this
event by querying the IPSec ASO and checking that the esn_event_arm
field is 0x0, which indicates an event has occurred. After handling
the event, the driver must re-arm the context by setting esn_event_arm
back to 0x1.
A race condition exists in this handling path. After validating the
event, the driver calls mlx5_accel_esp_modify_xfrm() to update the
kernel's xfrm state. This function temporarily releases and
re-acquires the xfrm state lock.
So, need to acknowledge the event first by setting esn_event_arm to
0x1. This prevents the driver from reprocessing the same ESN update if
the hardware sends events for other reason. Since the next ESN update
only occurs after nearly 2^31 packets are received, there's no risk of
missing an update, as it will happen long after this handling has
finished.
Processing the event twice causes the ESN high-order bits (esn_msb) to
be incremented incorrectly. The driver then programs the hardware with
this invalid ESN state, which leads to anti-replay failures and a
complete halt of IPSec traffic.
Fix this by re-arming the ESN event immediately after it is validated,
before calling mlx5_accel_esp_modify_xfrm(). This ensures that any
spurious, duplicate events are correctly ignored, closing the race
window. |
| In the Linux kernel, the following vulnerability has been resolved:
net: shaper: protect late read accesses to the hierarchy
We look up a netdev during prep of Netlink ops (pre- callbacks)
and take a ref to it. Then later in the body of the callback
we take its lock or RCU which are the actual protections.
This is not proper, a conversion from a ref to a locked netdev
must include a liveness check (a check if the netdev hasn't been
unregistered already). Fix the read cases (those under RCU).
Writes needs a separate change to protect from creating the
hierarchy after flush has already run. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: serialize lock/unlock against other NAND operations
nand_lock() and nand_unlock() call into chip->ops.lock_area/unlock_area
without holding the NAND device lock. On controllers that implement
SET_FEATURES via multiple low-level PIO commands, these can race with
concurrent UBI/UBIFS background erase/write operations that hold the
device lock, resulting in cmd_pending conflicts on the NAND controller.
Add nand_get_device()/nand_release_device() around the lock/unlock
operations to serialize them against all other NAND controller access. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/sva: Fix crash in iommu_sva_unbind_device()
domain->mm->iommu_mm can be freed by iommu_domain_free():
iommu_domain_free()
mmdrop()
__mmdrop()
mm_pasid_drop()
After iommu_domain_free() returns, accessing domain->mm->iommu_mm may
dereference a freed mm structure, leading to a crash.
Fix this by moving the code that accesses domain->mm->iommu_mm to before
the call to iommu_domain_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free of share_conf in compound request
smb2_get_ksmbd_tcon() reuses work->tcon in compound requests without
validating tcon->t_state. ksmbd_tree_conn_lookup() checks t_state ==
TREE_CONNECTED on the initial lookup path, but the compound reuse path
bypasses this check entirely.
If a prior command in the compound (SMB2_TREE_DISCONNECT) sets t_state
to TREE_DISCONNECTED and frees share_conf via ksmbd_share_config_put(),
subsequent commands dereference the freed share_conf through
work->tcon->share_conf.
KASAN report:
[ 4.144653] ==================================================================
[ 4.145059] BUG: KASAN: slab-use-after-free in smb2_write+0xc74/0xe70
[ 4.145415] Read of size 4 at addr ffff88810430c194 by task kworker/1:1/44
[ 4.145772]
[ 4.145867] CPU: 1 UID: 0 PID: 44 Comm: kworker/1:1 Not tainted 7.0.0-rc3+ #60 PREEMPTLAZY
[ 4.145871] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 4.145875] Workqueue: ksmbd-io handle_ksmbd_work
[ 4.145888] Call Trace:
[ 4.145892] <TASK>
[ 4.145894] dump_stack_lvl+0x64/0x80
[ 4.145910] print_report+0xce/0x660
[ 4.145919] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 4.145928] ? smb2_write+0xc74/0xe70
[ 4.145931] kasan_report+0xce/0x100
[ 4.145934] ? smb2_write+0xc74/0xe70
[ 4.145937] smb2_write+0xc74/0xe70
[ 4.145939] ? __pfx_smb2_write+0x10/0x10
[ 4.145942] ? _raw_spin_unlock+0xe/0x30
[ 4.145945] ? ksmbd_smb2_check_message+0xeb2/0x24c0
[ 4.145948] ? smb2_tree_disconnect+0x31c/0x480
[ 4.145951] handle_ksmbd_work+0x40f/0x1080
[ 4.145953] process_one_work+0x5fa/0xef0
[ 4.145962] ? assign_work+0x122/0x3e0
[ 4.145964] worker_thread+0x54b/0xf70
[ 4.145967] ? __pfx_worker_thread+0x10/0x10
[ 4.145970] kthread+0x346/0x470
[ 4.145976] ? recalc_sigpending+0x19b/0x230
[ 4.145980] ? __pfx_kthread+0x10/0x10
[ 4.145984] ret_from_fork+0x4fb/0x6c0
[ 4.145992] ? __pfx_ret_from_fork+0x10/0x10
[ 4.145995] ? __switch_to+0x36c/0xbe0
[ 4.145999] ? __pfx_kthread+0x10/0x10
[ 4.146003] ret_from_fork_asm+0x1a/0x30
[ 4.146013] </TASK>
[ 4.146014]
[ 4.149858] Allocated by task 44:
[ 4.149953] kasan_save_stack+0x33/0x60
[ 4.150061] kasan_save_track+0x14/0x30
[ 4.150169] __kasan_kmalloc+0x8f/0xa0
[ 4.150274] ksmbd_share_config_get+0x1dd/0xdd0
[ 4.150401] ksmbd_tree_conn_connect+0x7e/0x600
[ 4.150529] smb2_tree_connect+0x2e6/0x1000
[ 4.150645] handle_ksmbd_work+0x40f/0x1080
[ 4.150761] process_one_work+0x5fa/0xef0
[ 4.150873] worker_thread+0x54b/0xf70
[ 4.150978] kthread+0x346/0x470
[ 4.151071] ret_from_fork+0x4fb/0x6c0
[ 4.151176] ret_from_fork_asm+0x1a/0x30
[ 4.151286]
[ 4.151332] Freed by task 44:
[ 4.151418] kasan_save_stack+0x33/0x60
[ 4.151526] kasan_save_track+0x14/0x30
[ 4.151634] kasan_save_free_info+0x3b/0x60
[ 4.151751] __kasan_slab_free+0x43/0x70
[ 4.151861] kfree+0x1ca/0x430
[ 4.151952] __ksmbd_tree_conn_disconnect+0xc8/0x190
[ 4.152088] smb2_tree_disconnect+0x1cd/0x480
[ 4.152211] handle_ksmbd_work+0x40f/0x1080
[ 4.152326] process_one_work+0x5fa/0xef0
[ 4.152438] worker_thread+0x54b/0xf70
[ 4.152545] kthread+0x346/0x470
[ 4.152638] ret_from_fork+0x4fb/0x6c0
[ 4.152743] ret_from_fork_asm+0x1a/0x30
[ 4.152853]
[ 4.152900] The buggy address belongs to the object at ffff88810430c180
[ 4.152900] which belongs to the cache kmalloc-96 of size 96
[ 4.153226] The buggy address is located 20 bytes inside of
[ 4.153226] freed 96-byte region [ffff88810430c180, ffff88810430c1e0)
[ 4.153549]
[ 4.153596] The buggy address belongs to the physical page:
[ 4.153750] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff88810430ce80 pfn:0x10430c
[ 4.154000] flags: 0x
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in durable v2 replay of active file handles
parse_durable_handle_context() unconditionally assigns dh_info->fp->conn
to the current connection when handling a DURABLE_REQ_V2 context with
SMB2_FLAGS_REPLAY_OPERATION. ksmbd_lookup_fd_cguid() does not filter by
fp->conn, so it returns file handles that are already actively connected.
The unconditional overwrite replaces fp->conn, and when the overwriting
connection is subsequently freed, __ksmbd_close_fd() dereferences the
stale fp->conn via spin_lock(&fp->conn->llist_lock), causing a
use-after-free.
KASAN report:
[ 7.349357] ==================================================================
[ 7.349607] BUG: KASAN: slab-use-after-free in _raw_spin_lock+0x75/0xe0
[ 7.349811] Write of size 4 at addr ffff8881056ac18c by task kworker/1:2/108
[ 7.350010]
[ 7.350064] CPU: 1 UID: 0 PID: 108 Comm: kworker/1:2 Not tainted 7.0.0-rc3+ #58 PREEMPTLAZY
[ 7.350068] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 7.350070] Workqueue: ksmbd-io handle_ksmbd_work
[ 7.350083] Call Trace:
[ 7.350087] <TASK>
[ 7.350087] dump_stack_lvl+0x64/0x80
[ 7.350094] print_report+0xce/0x660
[ 7.350100] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 7.350101] ? __pfx___mod_timer+0x10/0x10
[ 7.350106] ? _raw_spin_lock+0x75/0xe0
[ 7.350108] kasan_report+0xce/0x100
[ 7.350109] ? _raw_spin_lock+0x75/0xe0
[ 7.350114] kasan_check_range+0x105/0x1b0
[ 7.350116] _raw_spin_lock+0x75/0xe0
[ 7.350118] ? __pfx__raw_spin_lock+0x10/0x10
[ 7.350119] ? __call_rcu_common.constprop.0+0x25e/0x780
[ 7.350125] ? close_id_del_oplock+0x2cc/0x4e0
[ 7.350128] __ksmbd_close_fd+0x27f/0xaf0
[ 7.350131] ksmbd_close_fd+0x135/0x1b0
[ 7.350133] smb2_close+0xb19/0x15b0
[ 7.350142] ? __pfx_smb2_close+0x10/0x10
[ 7.350143] ? xas_load+0x18/0x270
[ 7.350146] ? _raw_spin_lock+0x84/0xe0
[ 7.350148] ? __pfx__raw_spin_lock+0x10/0x10
[ 7.350150] ? _raw_spin_unlock+0xe/0x30
[ 7.350151] ? ksmbd_smb2_check_message+0xeb2/0x24c0
[ 7.350153] ? ksmbd_tree_conn_lookup+0xcd/0xf0
[ 7.350154] handle_ksmbd_work+0x40f/0x1080
[ 7.350156] process_one_work+0x5fa/0xef0
[ 7.350162] ? assign_work+0x122/0x3e0
[ 7.350163] worker_thread+0x54b/0xf70
[ 7.350165] ? __pfx_worker_thread+0x10/0x10
[ 7.350166] kthread+0x346/0x470
[ 7.350170] ? recalc_sigpending+0x19b/0x230
[ 7.350176] ? __pfx_kthread+0x10/0x10
[ 7.350178] ret_from_fork+0x4fb/0x6c0
[ 7.350183] ? __pfx_ret_from_fork+0x10/0x10
[ 7.350185] ? __switch_to+0x36c/0xbe0
[ 7.350188] ? __pfx_kthread+0x10/0x10
[ 7.350190] ret_from_fork_asm+0x1a/0x30
[ 7.350197] </TASK>
[ 7.350197]
[ 7.355160] Allocated by task 123:
[ 7.355261] kasan_save_stack+0x33/0x60
[ 7.355373] kasan_save_track+0x14/0x30
[ 7.355484] __kasan_kmalloc+0x8f/0xa0
[ 7.355593] ksmbd_conn_alloc+0x44/0x6d0
[ 7.355711] ksmbd_kthread_fn+0x243/0xd70
[ 7.355839] kthread+0x346/0x470
[ 7.355942] ret_from_fork+0x4fb/0x6c0
[ 7.356051] ret_from_fork_asm+0x1a/0x30
[ 7.356164]
[ 7.356214] Freed by task 134:
[ 7.356305] kasan_save_stack+0x33/0x60
[ 7.356416] kasan_save_track+0x14/0x30
[ 7.356527] kasan_save_free_info+0x3b/0x60
[ 7.356646] __kasan_slab_free+0x43/0x70
[ 7.356761] kfree+0x1ca/0x430
[ 7.356862] ksmbd_tcp_disconnect+0x59/0xe0
[ 7.356993] ksmbd_conn_handler_loop+0x77e/0xd40
[ 7.357138] kthread+0x346/0x470
[ 7.357240] ret_from_fork+0x4fb/0x6c0
[ 7.357350] ret_from_fork_asm+0x1a/0x30
[ 7.357463]
[ 7.357513] The buggy address belongs to the object at ffff8881056ac000
[ 7.357513] which belongs to the cache kmalloc-1k of size 1024
[ 7.357857] The buggy address is located 396 bytes inside of
[ 7.357857] freed 1024-byte region
---truncated--- |
