| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability, which was classified as critical, has been found in ForIP Tecnologia Administração PABX 1.x. This issue affects some unknown processing of the file /login of the component Authentication Form. The manipulation of the argument usuario leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-272423. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| The affected product permits OS command injection through improperly restricted commands, potentially allowing attackers to execute arbitrary code. |
| An attacker spoofing answers to ECS enabled requests sent out by the Recursor has a chance of success higher than non-ECS enabled queries.
The updated version include various mitigations against spoofing attempts of ECS enabled queries by chaining ECS enabled requests and enforcing stricter validation of the received answers.
The most strict mitigation done when the new setting outgoing.edns_subnet_harden (old style name edns-subnet-harden) is enabled. |
| A high-severity vulnerability that can lead to arbitrary code execution on the system hosting the Web SDK role was found in the Genetec Security Center product line. |
| Incorrect default permissions in some firmware for the Intel(R) Arc(TM) B-series GPUs within Ring 1: Device Drivers may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present with special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Improper verification of cryptographic signature during installation of a Printer driver via the TeamViewer_service.exe component of TeamViewer Remote Clients prior version 15.58.4 for Windows allows an attacker with local unprivileged access on a Windows system to elevate their privileges and install drivers. |
| Shearwater SecurEnvoy SecurAccess Enrol before 9.4.515 allows authentication through only a six-digit TOTP code (skipping a password check) if an HTTP POST request contains a SESSION parameter. |
| A stored Cross-site Scripting (XSS) vulnerability affecting 3DSwym in 3DSwymer from Release 3DEXPERIENCE R2022x through Release 3DEXPERIENCE R2024x allows an attacker to execute arbitrary script code in user's browser session. |
| The TELNET service of AdTran NetVanta 3120 18.01.01.00.E devices is enabled by default, and has default credentials for a root-level account. |
| On IROAD v9 devices, the dashcam has hardcoded default credentials ("qwertyuiop") that cannot be changed by the user. This allows an attacker within Wi-Fi range to connect to the device's network to perform sniffing. |
| A command injection flaw was found in the text editor Emacs. It could allow a remote, unauthenticated attacker to execute arbitrary shell commands on a vulnerable system. Exploitation is possible by tricking users into visiting a specially crafted website or an HTTP URL with a redirect. |
| The SendPulse Free Web Push plugin for WordPress is vulnerable to Stored Cross-Site Scripting in all versions up to, and including, 1.3.6 due to incorrect use of the wp_kses_allowed_html function. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X13SEM-F . An attacker can update the system firmware with a specially crafted image. |
| In the Linux kernel, the following vulnerability has been resolved:
codetag: debug: handle existing CODETAG_EMPTY in mark_objexts_empty for slabobj_ext
When alloc_slab_obj_exts() fails and then later succeeds in allocating a
slab extension vector, it calls handle_failed_objexts_alloc() to mark all
objects in the vector as empty. As a result all objects in this slab
(slabA) will have their extensions set to CODETAG_EMPTY.
Later on if this slabA is used to allocate a slabobj_ext vector for
another slab (slabB), we end up with the slabB->obj_exts pointing to a
slabobj_ext vector that itself has a non-NULL slabobj_ext equal to
CODETAG_EMPTY. When slabB gets freed, free_slab_obj_exts() is called to
free slabB->obj_exts vector.
free_slab_obj_exts() calls mark_objexts_empty(slabB->obj_exts) which will
generate a warning because it expects slabobj_ext vectors to have a NULL
obj_ext, not CODETAG_EMPTY.
Modify mark_objexts_empty() to skip the warning and setting the obj_ext
value if it's already set to CODETAG_EMPTY.
To quickly detect this WARN, I modified the code from
WARN_ON(slab_exts[offs].ref.ct) to BUG_ON(slab_exts[offs].ref.ct == 1);
We then obtained this message:
[21630.898561] ------------[ cut here ]------------
[21630.898596] kernel BUG at mm/slub.c:2050!
[21630.898611] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
[21630.900372] Modules linked in: squashfs isofs vfio_iommu_type1
vhost_vsock vfio vhost_net vmw_vsock_virtio_transport_common vhost tap
vhost_iotlb iommufd vsock binfmt_misc nfsv3 nfs_acl nfs lockd grace
netfs tls rds dns_resolver tun brd overlay ntfs3 exfat btrfs
blake2b_generic xor xor_neon raid6_pq loop sctp ip6_udp_tunnel
udp_tunnel nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib
nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct
nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4
nf_tables rfkill ip_set sunrpc vfat fat joydev sg sch_fq_codel nfnetlink
virtio_gpu sr_mod cdrom drm_client_lib virtio_dma_buf drm_shmem_helper
drm_kms_helper drm ghash_ce backlight virtio_net virtio_blk virtio_scsi
net_failover virtio_console failover virtio_mmio dm_mirror
dm_region_hash dm_log dm_multipath dm_mod fuse i2c_dev virtio_pci
virtio_pci_legacy_dev virtio_pci_modern_dev virtio virtio_ring autofs4
aes_neon_bs aes_ce_blk [last unloaded: hwpoison_inject]
[21630.909177] CPU: 3 UID: 0 PID: 3787 Comm: kylin-process-m Kdump:
loaded Tainted: G W 6.18.0-rc1+ #74 PREEMPT(voluntary)
[21630.910495] Tainted: [W]=WARN
[21630.910867] Hardware name: QEMU KVM Virtual Machine, BIOS unknown
2/2/2022
[21630.911625] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[21630.912392] pc : __free_slab+0x228/0x250
[21630.912868] lr : __free_slab+0x18c/0x250[21630.913334] sp :
ffff8000a02f73e0
[21630.913830] x29: ffff8000a02f73e0 x28: fffffdffc43fc800 x27:
ffff0000c0011c40
[21630.914677] x26: ffff0000c000cac0 x25: ffff00010fe5e5f0 x24:
ffff000102199b40
[21630.915469] x23: 0000000000000003 x22: 0000000000000003 x21:
ffff0000c0011c40
[21630.916259] x20: fffffdffc4086600 x19: fffffdffc43fc800 x18:
0000000000000000
[21630.917048] x17: 0000000000000000 x16: 0000000000000000 x15:
0000000000000000
[21630.917837] x14: 0000000000000000 x13: 0000000000000000 x12:
ffff70001405ee66
[21630.918640] x11: 1ffff0001405ee65 x10: ffff70001405ee65 x9 :
ffff800080a295dc
[21630.919442] x8 : ffff8000a02f7330 x7 : 0000000000000000 x6 :
0000000000003000
[21630.920232] x5 : 0000000024924925 x4 : 0000000000000001 x3 :
0000000000000007
[21630.921021] x2 : 0000000000001b40 x1 : 000000000000001f x0 :
0000000000000001
[21630.921810] Call trace:
[21630.922130] __free_slab+0x228/0x250 (P)
[21630.922669] free_slab+0x38/0x118
[21630.923079] free_to_partial_list+0x1d4/0x340
[21630.923591] __slab_free+0x24c/0x348
[21630.924024] ___cache_free+0xf0/0x110
[21630.924468] qlist_free_all+0x78/0x130
[21630.924922] kasan_quarantine_reduce+0x11
---truncated--- |
| Atcom 100M IP Phones firmware version 2.7.x.x contains an authenticated command injection vulnerability in the web configuration CGI script that allows attackers to execute arbitrary system commands. Attackers can inject shell commands through the 'cmd' parameter in web_cgi_main.cgi, enabling remote code execution with administrative credentials. |
| A privilege escalation vulnerability was discovered in XCC that could allow a valid, authenticated XCC user with elevated privileges to perform command injection via specially crafted file uploads. |
| A reflected cross-site scripted (XSS) vulnerability in Codazon Magento Themes v1.1.0.0 to v2.4.7 allows attackers to execute arbitrary Javascript in the context of a user's browser via a crafted payload injected into the cat parameter. |
| In BootRom, there's a possible unchecked command index. This could lead to local escalation of privilege with no additional execution privileges needed. |
| The WP Post Author – Boost Your Blog's Engagement with Author Box, Social Links, Co-Authors, Guest Authors, Post Rating System, and Custom User Registration Form Builder plugin for WordPress is vulnerable to time-based SQL Injection via the linked_user_id parameter in all versions up to, and including, 3.8.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| (conda) Constructor is a tool that enables users to create installers for conda package collections. In versions 3.12.2 and below, the installation directory inherits permissions from its parent directory. Outside of restricted directories, the permissions are very permissive and often allow write access by authenticated users. Any logged in user can make modifications during the installation for both single-user and all-user installations. This constitutes a local attack vector if the installation is in a directory local users have access to. For single-user installations in a shared directory, these permissions persist after the installation. This issue is fixed in version 3.13.0. |
