| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: mark I2C adapter when hardware is powered down
On some i.MX platforms, certain I2C client drivers keep a periodic
workqueue which continues to trigger I2C transfers.
During system suspend/resume, there exists a time window between:
- suspend_noirq and the system entering suspend
- the system starting to resume and resume_noirq
In this window, the I2C controller resources such as clock and pinctrl
may already be disabled or not yet restored.
If a workqueue triggers an I2C transfer in this period, the driver
attempts to access I2C registers while the hardware resources are
unavailable, which may lead to system hang.
Mark the I2C adapter as suspended during noirq suspend and block new
transfers until resume, ensuring that I2C transfers are only issued
when hardware resources are available. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: pch: use raw_spinlock_t for the register lock
pch_irq_type() is registered as the irq_chip .irq_set_type callback and
takes chip->spinlock with spin_lock_irqsave(). This callback is reached
from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while
the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled.
That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is
an rtmutex-backed sleeping lock, so acquiring it there is invalid.
This was confirmed on a PREEMPT_RT kernel with lockdep
(PROVE_RAW_LOCK_NESTING and DEBUG_ATOMIC_SLEEP). A grounded PoC mirrored
pch_irq_type()'s locking and drove it through the real genirq carrier
irq_set_irq_type() -> __irq_set_trigger() -> chip->irq_set_type(), i.e.
the same __irq_set_trigger() edge that __setup_irq() takes for a
requested IRQ. With the original spin_lock_irqsave() edge lockdep
reported an invalid wait context, immediately followed by:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 95, name: insmod
hardirqs last disabled at (3784): _raw_spin_lock_irqsave+0x4f/0x60
rt_spin_lock+0x3a/0x1c0
repro_irq_set_type+0x64/0xa0 [pch_repro]
__irq_set_trigger+0x69/0x140
irq_set_irq_type+0x78/0xd0
Switching the mirrored lock to raw_spinlock_t made both splats go away.
Convert the register lock to raw_spinlock_t. The same lock also
serializes the GPIO direction/value callbacks and the suspend/resume
register save/restore, but all of those critical sections only perform
MMIO register accesses (ioread32()/iowrite32()) and
irq_set_handler_locked(); none of them contain sleepable operations.
Keeping this register lock non-sleeping is therefore appropriate for the
irqchip callbacks and does not change the GPIO-side locking contract.
This is the same class of issue and fix as recently addressed for other
GPIO controllers, e.g. commit 286533cb14a3 ("gpio: sch: use raw_spinlock_t
in the irq startup path") and commit 90f0109019e6 ("gpio: eic-sprd: use
raw_spinlock_t in the irq startup path"). |
| Defuddle cleans up HTML pages. Prior to 0.19.1, site extractors interpolate page-derived image alt and src values, og:image values, and video descriptions into HTML strings without context-appropriate escaping, and buildExtractorResponse() returns this contentHtml without the main pipeline's DOM-based sanitization. The affected paths include src/extractors/x-article.ts, src/extractors/substack.ts, and src/extractors/youtube.ts. A malicious page or attacker-controlled content on a matching domain can inject event-handler attributes or javascript URLs that execute when a victim or downstream application renders the extracted HTML. This issue is fixed in version 0.19.1. |
| Combodo iTop is a web based IT service management tool. Prior to 3.2.3, there is a Reflected Cross-Site Scripting (XSS) vulnerability in the synchro import script. This issue has been fixed in version 3.2.3. |
| In the Linux kernel, the following vulnerability has been resolved:
uprobes: Fix NULL pointer dereference in hprobe_expire()
Forking a task that has a pending uretprobe can oops the kernel with a
NULL pointer dereference in the clone() path:
BUG: kernel NULL pointer dereference, address: 0000000000000018
Oops: 0002 [#1] SMP NOPTI
RIP: 0010:hprobe_expire
CR2: 0000000000000018
Call Trace:
uprobe_copy_process
copy_process
kernel_clone
__x64_sys_clone
do_syscall_64
entry_SYSCALL_64_after_hwframe
This was found on real hosts on Meta fleet.
I've got the impression that this is what is happening:
CPU 1 CPU 2 (traced task)
----- -------------------
hit uprobe, prepare_uretprobe():
hprobe LEASED, refcount >= 1
uprobe_unregister()
put_uprobe(): refcount -> 0
fork() -> dup_utask()
hprobe_expire(hprobe, true)
try_get_uprobe() -> NULL
get_uprobe(NULL) <-- Oops
Only take the extra reference when the uprobe is non-NULL; a NULL means
it is gone and is the correct value to return. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: stop fast-leave after deleting a port group
br_multicast_leave_group() iterates mp->ports with pp = &p->next in
its fast-leave path. After br_multicast_del_pg() removes p,
continuing the loop advances pp through the deleted entry.
If multicast-to-unicast was enabled, the bridge can hold multiple port
groups for the same port and group with different source MAC
addresses. Once multicast-to-unicast is disabled,
br_port_group_equal() matches those entries by port only. A fast leave
can then delete one entry and continue from its stale next pointer,
leaving mp->ports pointing at a deleted port group.
Fast leave only needs to remove one matching port group. Break after
br_multicast_del_pg() so the loop stops before dereferencing the
removed entry. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Clamp frame size in implicit-feedback mode
snd_usb_handle_sync_urb() scales received sync packet sizes by the sender's
stride and stores the result directly in out_packet->packet_size[i]. If a
connected USB device sends an oversized sync packet, this frame count can
exceed ep->maxframesize.
The un-clamped frame count then propagates to the playback endpoint queue,
potentially driving packet transfers beyond the endpoint's hardware frame
limits.
Cap the calculated frame count against ep->maxframesize in
snd_usb_handle_sync_urb() to prevent oversized packets from entering the
playback queue. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ump: fix double free of out_cvts on rawmidi error
snd_ump_attach_legacy_rawmidi() allocates the legacy conversion array
ump->out_cvts and, on the snd_rawmidi_new() error path, frees it with
kfree() but leaves ump->out_cvts pointing at the freed memory. When the
endpoint is later torn down, snd_ump_endpoint_free() frees ump->out_cvts
a second time, resulting in a double free.
The host snd-usb-audio driver attaches the legacy rawmidi for any USB
MIDI 2.0 (UMP) device, so a device that makes snd_rawmidi_new() fail
reaches this path on enumeration.
Clear ump->out_cvts after freeing it on the error path so it is not
freed again during teardown.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| Phalcon is a high-performance, full-stack PHP framework. In 5.15.0 and earlier, resolveFilter in phalcon/Mvc/View/Engine/Volt/Compiler.zep builds the join filter by inserting the raw separator and array token values into generated PHP without passing them through expression(). An attacker who can influence Volt template source can place quote-breaking content in a join argument, inject PHP into the compiled cache file, and execute it when Phalcon\Mvc\View\Engine\Volt::render() loads the template. This issue is fixed in version 5.16.0. |
| An incorrect access control vulnerability in reportico-web <= 8.1.0 allows an unauthenticated attacker to inject arbitrary php code into the PreExecuteCode attribute of any report regardless of the safe_mode setting leading to remote code execution. |
| Vulnerability in the Oracle Enterprise Manager for Systems Infrastructure product of Oracle Enterprise Manager (component: Agent). Supported versions that are affected are 13.5 and 24.1. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle Enterprise Manager for Systems Infrastructure executes to compromise Oracle Enterprise Manager for Systems Infrastructure. Successful attacks of this vulnerability can result in takeover of Oracle Enterprise Manager for Systems Infrastructure. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Race condition in V8 in Google Chrome prior to 151.0.7922.173 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Combodo iTop is a web based IT service management tool. Prior to 3.2.3, iTop returns different responses for valid/invalid usernames depending on multiple factors in the reset password mechanism, leading to user enumeration. This issue has been fixed in version 3.2.3. |
| Combodo iTop is a web based IT service management tool. Prior to 3.2.3, inline images that are accessible without being authenticated are protected by a weak 24-bit pseudo-random secret. This issue has been fixed in version 3.2.3. |
| Keystone is a content management system for Node.js. Prior to 6.5.3, the findMany resolver in packages/core/src/lib/core/queries/resolvers.ts compares the signed take argument directly with graphql.maxTake, allowing a remote unauthenticated GraphQL client to provide a negative take value whose magnitude exceeds the configured bound. The bypass also applies to relationship queries and can return more records than the developer intended, potentially exhausting service resources. This issue is fixed in version 6.5.3. |
| GeoTools is an open source Java library that provides tools for geospatial data. Starting in version 30.5 and prior to versions 33.6, 34.5, and 33.6, an SQL Injection Vulnerability is present when executing OGC Filters with PostGIS DataStore implementation: `jsonArrayContains` function; Requires PostGIS 12 or greater with a String or JSON field. For PostGIS 12 and greater `jsonArrayContains(<column>, <pointer>, <value>)` function writes `<value>` into generated SQL without escaping. Patches are available in versions 33.6, 34.5, and 33.6. No known workaround is available. To limit scope of SQL Injection the PostGIS connection pool should be configured with limited rights. |
| Kite is a Kubernetes dashboard. Prior to version 0.12.3, authenticated Kite users with any role can request `/api/v1/overview` for a cluster that their roles do not permit by selecting that cluster with `x-cluster-name`. The overview route is registered before `middleware.RBACMiddleware()` and `GetOverview` only checks `len(user.Roles) > 0`, so it returns aggregate Kubernetes inventory and capacity data from unauthorized clusters. Version 0.12.3 fixes the issue. |
| RaTeX is a KaTeX-compatible math rendering engine written in Rust. Prior to version 0.1.11, RaTeX’s recursive-descent parser recurses one (or more) native stack frame per nesting level at `{`, `\left`, `\sqrt{`, `^{`, etc, with no maximum depth limit. A short, ~10 KB input of nested groups overflows the 8 MB main-thread stack and aborts the process. With `panic = "abort"` (`Cargo.toml:48`), and because a Rust stack overflow is always a fatal `SIGABRT` regardless of panic strategy this is an unrecoverable, whole-process denial of service reachable from a single untrusted LaTeX string. Version 0.1.11 fixes the issue. |
| RaTeX is a KaTeX-compatible math rendering engine written in Rust. Prior to version 0.1.11, the public parser entrypoint `ratex_parser::parse(&str)` panics on the 9-byte input `\verbéxé` (i.e. `\verb` followed by the non-ASCII delimiter `é`). When handling a `\verb` command, the parser slices the verbatim argument with byte indices (`arg[1..arg.len() - 1]`); if the delimiter character is multibyte UTF-8, index `1` lands inside that character and Rust panics with *“byte index 1 is not a char boundary”*. Because RaTeX’s release profile sets `panic = "abort"` (`Cargo.toml:48`), the panic aborts the entire process — not just the current request/thread — making this a hard denial of service for any service that renders untrusted LaTeX. Version 0.1.11 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
media: uvcvideo: Fix deadlock if uvc_status_stop is called from async_ctrl.work
If a UVC camera has an asynchronous control, uvc_status_stop may be
called from async_ctrl.work:
uvc_ctrl_status_event_work()
uvc_ctrl_status_event()
uvc_ctrl_clear_handle()
uvc_pm_put()
uvc_status_put()
uvc_status_stop()
cancel_work_sync()
This will cause a deadlock, since cancel_work_sync will wait for
uvc_ctrl_status_event_work to complete before returning.
Fix this by returning early from uvc_status_stop if we are currently in
the work function. flush_status now remains false until uvc_status_start
is called again, ensuring that uvc_ctrl_status_event_work won't resubmit
the URB. |
