| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Null pointer dereference issue in the image codec module. Impact: Successful exploitation of this vulnerability may affect availability. |
| In the Linux kernel, the following vulnerability has been resolved:
dm log: fix out-of-bounds write due to region_count overflow
The local variable region_count in create_log_context() is declared as
unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit).
When a device-mapper target has a sufficiently large ti->len with a small
region_size, the division result can exceed UINT_MAX. The truncated
value is then used to calculate bitset_size, causing clean_bits,
sync_bits, and recovering_bits to be allocated far smaller than needed
for the actual number of regions.
Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use
region indices derived from the full untruncated region space, causing
out-of-bounds writes to kernel heap memory allocated by vmalloc.
This can be reproduced by creating a mirror target whose region_count
overflows 32 bits:
dmsetup create bigzero --table '0 8589934594 zero'
dmsetup create mymirror --table '0 8589934594 mirror \
core 2 2 nosync 2 /dev/mapper/bigzero 0 \
/dev/mapper/bigzero 0'
The status output confirms the truncation (sync_count=1 instead of
4294967297, because 0x100000001 was truncated to 1):
$ dmsetup status mymirror
0 8589934594 mirror 2 254:1 254:1 1/4294967297 ...
This leads to a kernel crash in core_in_sync:
BUG: scheduling while atomic: (udev-worker)/9150/0x00000000
RIP: 0010:core_in_sync+0x14/0x30 [dm_log]
CR2: 0000000000000008
Fixing recursive fault but reboot is needed!
Fix by widening the local region_count to sector_t and adding an
explicit overflow check before the value is assigned to lc->region_count. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nat: use kfree_rcu to release ops
Florian Westphal says:
"Historically this is not an issue, even for normal base hooks: the data
path doesn't use the original nf_hook_ops that are used to register the
callbacks.
However, in v5.14 I added the ability to dump the active netfilter
hooks from userspace.
This code will peek back into the nf_hook_ops that are available
at the tail of the pointer-array blob used by the datapath.
The nat hooks are special, because they are called indirectly from
the central nat dispatcher hook. They are currently invisible to
the nfnl hook dump subsystem though.
But once that changes the nat ops structures have to be deferred too."
Update nf_nat_register_fn() to deal with partial exposition of the hooks
from error path which can be also an issue for nfnetlink_hook. |
| Permission control vulnerability in the device key management module. Impact: Successful exploitation of this vulnerability may affect availability. |
| Vim is an open source, command line text editor. Prior to version 9.2.0495, a Vimscript code injection vulnerability exists in s:NetrwBookHistSave() in the netrw plugin (runtime/pack/dist/opt/netrw/autoload/netrw.vim) when serializing browsed directory paths to the history file ~/.vim/.netrwhist. A directory name derived from the filesystem is interpolated into a single-quoted Vimscript string literal without escaping embedded single quotes, allowing a crafted directory name to break out of the string context and execute arbitrary Vimscript, including shell commands via system() and :!, the next time the history file is sourced. This issue has been patched in version 9.2.0495. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix potential UAF after skb_unshare() failure
If skb_unshare() fails to unshare a packet due to allocation failure in
rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread())
will be NULL'd out. This will likely cause the call to
trace_rxrpc_rx_done() to oops.
Fix this by moving the unsharing down to where rxrpc_input_call_event()
calls rxrpc_input_call_packet(). There are a number of places prior to
that where we ignore DATA packets for a variety of reasons (such as the
call already being complete) for which an unshare is then avoided.
And with that, rxrpc_input_packet() doesn't need to take a pointer to the
pointer to the packet, so change that to just a pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Fix use-after-free in iomap inline data write path
The inline data buffer head (dibh) is being released prematurely in
gfs2_iomap_begin() via release_metapath() while iomap->inline_data
still points to dibh->b_data. This causes a use-after-free when
iomap_write_end_inline() later attempts to write to the inline data
area.
The bug sequence:
1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode
metadata into dibh
2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode)
3. Calls release_metapath() which calls brelse(dibh), dropping refcount
to 0
4. kswapd reclaims the page (~39ms later in the syzbot report)
5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data
6. KASAN detects use-after-free write to freed memory
Fix by storing dibh in iomap->private and incrementing its refcount
with get_bh() in gfs2_iomap_begin(). The buffer is then properly
released in gfs2_iomap_end() after the inline write completes,
ensuring the page stays alive for the entire iomap operation.
Note: A C reproducer is not available for this issue. The fix is based
on analysis of the KASAN report and code review showing the buffer head
is freed before use.
[agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid
leaks in gfs2_iomap_get() and gfs2_iomap_alloc().] |
| BIND servers that are configured to use TKEY-based authentication via GSS-API tokens are vulnerable to excessive memory consumption when receiving and processing maliciously-constructed packets. Typically these servers will be found in Active Directory integrated DNS deployments and/or Kerberos-secured DNS environments.
This issue affects BIND 9 versions 9.0.0 through 9.16.50, 9.18.0 through 9.18.48, 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, 9.9.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Do not skip unrelated mode changes in DSC validation
Starting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in
atomic check"), amdgpu resets the CRTC state mode_changed flag to false when
recomputing the DSC configuration results in no timing change for a particular
stream.
However, this is incorrect in scenarios where a change in MST/DSC configuration
happens in the same KMS commit as another (unrelated) mode change. For example,
the integrated panel of a laptop may be configured differently (e.g., HDR
enabled/disabled) depending on whether external screens are attached. In this
case, plugging in external DP-MST screens may result in the mode_changed flag
being dropped incorrectly for the integrated panel if its DSC configuration
did not change during precomputation in pre_validate_dsc().
At this point, however, dm_update_crtc_state() has already created new streams
for CRTCs with DSC-independent mode changes. In turn,
amdgpu_dm_commit_streams() will never release the old stream, resulting in a
memory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to
the new stream either, which manifests as a use-after-free when the stream gets
disabled later on:
BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu]
Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977
Workqueue: events drm_mode_rmfb_work_fn
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xa0
print_address_description.constprop.0+0x88/0x320
? dc_stream_release+0x25/0x90 [amdgpu]
print_report+0xfc/0x1ff
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x225/0x4e0
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_report+0xe1/0x180
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_check_range+0x125/0x200
dc_stream_release+0x25/0x90 [amdgpu]
dc_state_destruct+0x14d/0x5c0 [amdgpu]
dc_state_release.part.0+0x4e/0x130 [amdgpu]
dm_atomic_destroy_state+0x3f/0x70 [amdgpu]
drm_atomic_state_default_clear+0x8ee/0xf30
? drm_mode_object_put.part.0+0xb1/0x130
__drm_atomic_state_free+0x15c/0x2d0
atomic_remove_fb+0x67e/0x980
Since there is no reliable way of figuring out whether a CRTC has unrelated
mode changes pending at the time of DSC validation, remember the value of the
mode_changed flag from before the point where a CRTC was marked as potentially
affected by a change in DSC configuration. Reset the mode_changed flag to this
earlier value instead in pre_validate_dsc().
(cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b) |
| pyOpenSSL is a Python wrapper around the OpenSSL library. Starting in version 22.0.0 and prior to version 26.0.0, if a user provided callback to `set_cookie_generate_callback` returned a cookie value greater than 256 bytes, pyOpenSSL would overflow an OpenSSL provided buffer. Starting in version 26.0.0, cookie values that are too long are now rejected. |
| Improper isolation of shared resources within the CPU operation cache on Zen 2-based products could allow an attacker to corrupt instructions executed at a different privilege level, potentially resulting in privilege escalation. |
| Arm C1-Ultra, C1-Premium, Neoverse V3 & V3AE, Neoverse V2, Neoverse V1, Neoverse-N2, Neoverse-N1, Cortex-X925, Cortex-X4, Cortex-X3, Cortex-X2, Cortex-X1 & X1C, Cortex-A710, Cortex-A78, A78AE & A78C, Cortex-A77, Cortex-A76 & A76A may allow writes to resources owned by a higher exception level. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: check return value of nvmet_tcp_set_queue_sock
The return value of nvmet_tcp_set_queue_sock() is currently ignored in
nvmet_tcp_tls_handshake_done(). If it fails (e.g., due to the socket
not being in TCP_ESTABLISHED state), the socket callbacks will not be
properly set, leading to queue and socket leakage.
Fix this by capturing the return value and calling
nvmet_tcp_schedule_release_queue() on failure to ensure proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: midi: Serialize output teardown with event_input
event_process_midi() borrows msynth->output_rfile.output and then
passes the substream to dump_midi() and snd_rawmidi_kernel_write()
without synchronizing with the output open/close transition.
midisynth_use() also publishes output_rfile before
snd_rawmidi_output_params() has finished.
The last midisynth_unuse() can therefore release the same rawmidi file
and free substream->runtime before snd_rawmidi_kernel_write1() takes
its runtime buffer reference. That leaves the event_input path using a
stale substream or runtime and can end in a NULL-deref or use-after-free.
Fix this with two pieces of synchronization. Keep a short IRQ-safe
spinlock only for publishing or clearing output_rfile and for pairing
the output snapshot with an snd_use_lock_t reference. Once
event_process_midi() has taken that in-flight reference, it drops the
spinlock before calling snd_seq_dump_var_event(), dump_midi(), or
snd_rawmidi_kernel_write(). midisynth_unuse() now detaches the visible
rawmidi file under the same spinlock, waits for the in-flight writers
to drain, and only then drains and releases the saved file.
midisynth_use() likewise opens into a local snd_rawmidi_file and
publishes it only after snd_rawmidi_output_params() succeeds.
The buggy scenario involves two paths, with each column showing the
order within that path:
event_input path: last unuse path:
1. event_process_midi() snapshots 1. midisynth_unuse() starts
output_rfile.output. tearing down output_rfile.
2. dump_midi() reaches 2. snd_rawmidi_kernel_release()
snd_rawmidi_kernel_write() closes the output file.
before runtime is pinned. 3. close_substream() frees
3. The callback keeps using substream->runtime.
the borrowed substream.
Validation reproduced this kernel report:
KASAN null-ptr-deref in snd_rawmidi_kernel_write1+0x56/0x360
RIP: 0033:0x7fde7dd0837f
RIP: 0010:snd_rawmidi_kernel_write1+0x56/0x360 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: oss: Fix UAF at handling events with embedded SysEx data
The OSS sequencer processes the input MIDI bytes into a sequencer
event to be dispatched later (in snd_seq_oss_midi_putc() called from
snd_seq_oss_process_event()). When it's a SysEx data, the event
record contains data.ext.ptr pointer to the original SysEx bytes, and
the referred data is copied into the pool afterwards at dispatching.
The problem is that, if the sequencer port gets closed concurrently
before the dispatch, the OSS sequencer core also releases the
resources (in snd_seq_oss_midi_check_exit_port()), while the pending
event may hold a stale pointer, eventually leading to a UAF at a later
dispatch.
Fortunately, there is already a refcounting mechanism (snd_use_lock_t)
for the OSS MIDI device access, and for addressing the issue above, we
just need to extend the refcount until the event gets dispatched.
This patch extends snd_seq_oss_process_event() to give back the
refcount object, which is in turn released after calling the sequencer
dispatcher with the given event in the caller side.
According to the original report, KASAN report as below:
KASAN slab-use-after-free in snd_seq_event_dup+0x40c/0x470
RIP: 0033:0x7f2cb66a6340
Read of size 6
Call trace:
dump_stack_lvl+0x73/0xb0 (?:?)
print_report+0xd1/0x650 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x1a7/0x340 (?:?)
kasan_complete_mode_report_info+0x64/0x200 (?:?)
kasan_report+0xf7/0x130 (?:?)
snd_seq_event_dup+0x40c/0x470 (?:?)
kasan_check_range+0x10c/0x1c0 (?:?)
__asan_memcpy+0x27/0x70 (?:?)
snd_seq_event_dup+0x9/0x470 (?:?)
snd_seq_client_enqueue_event+0x139/0x240 (?:?)
_raw_spin_unlock_irqrestore+0x4b/0x60 (?:?)
snd_seq_kernel_client_enqueue+0x102/0x120 (?:?)
snd_seq_oss_write+0x416/0x4e0 (?:?)
apparmor_file_permission+0x20/0x30 (?:?)
odev_write+0x3b/0x60 (?:?)
vfs_write+0x1ce/0x850 (?:?)
lock_release+0xc8/0x2a0 (?:?)
__kasan_check_write+0x18/0x20 (?:?)
__mutex_unlock_slowpath+0x129/0x510 (?:?)
ksys_write+0xe1/0x180 (?:?)
mutex_unlock+0x16/0x20 (?:?)
odev_ioctl+0x65/0xc0 (?:?)
__x64_sys_write+0x46/0x60 (?:?)
x64_sys_call+0x7d/0x20d0 (?:?)
do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix out-of-bounds write in irdma_copy_user_pgaddrs
The irdma_copy_user_pgaddrs function loops through all of the umem DMA
blocks to populate the PBLEs and will stop when either the last DMA
block is reached or palloc->total_cnt is reached. The issue is that
the logic for checking palloc->total_cnt would only work for non-zero
values.
When irdma_setup_pbles is called with lvl==0, it
calls irdma_copy_user_pgaddrs with palloc->total_cnt==0, which means
the only way to break out of the loop is to reach the last umem DMA
block, which means it could end up going beyond the fixed size of 4
iwmr->pgaddrmem array that is used in the lvl==0 case.
In the case of QP/CQ/SRQ rings, the value of lvl is determined by a
separate input (for example, req.cq_pages in the case of a CQ). So,
we must perform explicit checking to ensure we don't overflow the
pgaddrmem array if the user provides a umem that consists of more
blocks than their provided req.cq_pages. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/srpt: fix integer overflow in immediate data length check
imm_buf->len is a user-controlled uint32_t received from the network.
Adding it to imm_data_offset without overflow checking allows a
malicious initiator to send len=0xFFFFFFFF, causing req_size to wrap
around to a small value, bypassing the bounds check, and subsequently
passing a ~4GB length to sg_init_one().
Use check_add_overflow() to detect wrapping before the comparison. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: addrconf: bail out of dad_failure when state is no longer POSTDAD
addrconf_dad_failure() transitions ifp->state from DAD to POSTDAD
via addrconf_dad_end(), which drops ifp->lock on return. The lock
is re-acquired after net_info_ratelimited(). A concurrent
ipv6_del_addr() can take the lock in that window, set ifp->state
to DEAD and run list_del_rcu(&ifp->if_list).
addrconf_dad_failure() then overwrites DEAD with ERRDAD at errdad:
and schedules a new dad_work. The work calls ipv6_del_addr()
again, hitting the already-poisoned list entry:
general protection fault: 0000 [#1] SMP NOPTI
CPU: 4 PID: 217 Comm: kworker/4:1
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:ipv6_del_addr+0xe9/0x280
RAX: dead000000000122
Call Trace:
addrconf_dad_stop+0x113/0x140
addrconf_dad_work+0x28c/0x430
process_one_work+0x1eb/0x3b0
worker_thread+0x4d/0x400
kthread+0x104/0x140
ret_from_fork+0x35/0x40
Fold the addrconf_dad_end() logic into addrconf_dad_failure() under
a single ifp->lock critical section. The STABLE_PRIVACY branch
temporarily drops ifp->lock around address regeneration, so at
lock_errdad: verify the state is still POSTDAD before transitioning
to ERRDAD; bail out otherwise to avoid overwriting a state set by
another path while the lock was released. |
| In the Linux kernel, the following vulnerability has been resolved:
dlm: fix add msg handle in send_queue ordered
In a benchmark scenario triggering a lot of requests that triggers a lot
of DLM messages on the network it can be that the mh->seq is not ordered
according the oldest seq number. This ordering is required by
dlm_receive_ack as "before(mh->seq, seq)" will stop to check for older
sequence numbers that are ordered in the tail of "node->send_queue".
The side effects of not having it correct ordered regarding
"before(mh->seq, seq)" are refcounting issues and use-after free.
I only was able to reproduce this issue in a experimental DLM branch
and a user space DLM benchmark that uses io_uring. After changing this I
don't experienced any refcounting with the sending buffer issues anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Check for page allocation failure correctly in TIO
Sashiko notes:
> if __snp_alloc_firmware_pages() returns NULL under memory pressure, is it
> safe to pass it directly to page_address()?
>
> On architectures without HASHED_PAGE_VIRTUAL, page_address(NULL) might
> compute a deterministic but invalid, non-zero virtual address. The
> subsequent if (tio_status) check would then evaluate to true, and
> sev_tsm_init_locked() would dereference the invalid pointer.
Indeed, page_address(NULL) will return non-NULL garbage here. Fix this by
checking the page allocation itself for NULL, not the resulting virtual
address. |
