| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
via_wdt: fix critical boot hang due to unnamed resource allocation
The VIA watchdog driver uses allocate_resource() to reserve a MMIO
region for the watchdog control register. However, the allocated
resource was not given a name, which causes the kernel resource tree
to contain an entry marked as "<BAD>" under /proc/iomem on x86
platforms.
During boot, this unnamed resource can lead to a critical hang because
subsequent resource lookups and conflict checks fail to handle the
invalid entry properly. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: dma-crossbar: fix device leak on am335x route allocation
Make sure to drop the reference taken when looking up the crossbar
platform device during am335x route allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: stm32: dmamux: fix device leak on route allocation
Make sure to drop the reference taken when looking up the DMA mux
platform device during route allocation.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: sh: rz-dmac: fix device leak on probe failure
Make sure to drop the reference taken when looking up the ICU device
during probe also on probe failures (e.g. probe deferral). |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: lpc18xx-dmamux: fix device leak on route allocation
Make sure to drop the reference taken when looking up the DMA mux
platform device during route allocation.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw: dmamux: fix OF node leak on route allocation failure
Make sure to drop the reference taken to the DMA master OF node also on
late route allocation failures. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: qcom: gpi: Fix memory leak in gpi_peripheral_config()
Fix a memory leak in gpi_peripheral_config() where the original memory
pointed to by gchan->config could be lost if krealloc() fails.
The issue occurs when:
1. gchan->config points to previously allocated memory
2. krealloc() fails and returns NULL
3. The function directly assigns NULL to gchan->config, losing the
reference to the original memory
4. The original memory becomes unreachable and cannot be freed
Fix this by using a temporary variable to hold the krealloc() result
and only updating gchan->config when the allocation succeeds.
Found via static analysis and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix memory leak in idpf_vport_rel()
Free vport->rx_ptype_lkup in idpf_vport_rel() to avoid leaking memory
during a reset. Reported by kmemleak:
unreferenced object 0xff450acac838a000 (size 4096):
comm "kworker/u258:5", pid 7732, jiffies 4296830044
hex dump (first 32 bytes):
00 00 00 00 00 10 00 00 00 10 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 ................
backtrace (crc 3da81902):
__kmalloc_cache_noprof+0x469/0x7a0
idpf_send_get_rx_ptype_msg+0x90/0x570 [idpf]
idpf_init_task+0x1ec/0x8d0 [idpf]
process_one_work+0x226/0x6d0
worker_thread+0x19e/0x340
kthread+0x10f/0x250
ret_from_fork+0x251/0x2b0
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix memory leak of flow steer list on rmmod
The flow steering list maintains entries that are added and removed as
ethtool creates and deletes flow steering rules. Module removal with active
entries causes memory leak as the list is not properly cleaned up.
Prevent this by iterating through the remaining entries in the list and
freeing the associated memory during module removal. Add a spinlock
(flow_steer_list_lock) to protect the list access from multiple threads. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix memory leak in idpf_vc_core_deinit()
Make sure to free hw->lan_regs. Reported by kmemleak during reset:
unreferenced object 0xff1b913d02a936c0 (size 96):
comm "kworker/u258:14", pid 2174, jiffies 4294958305
hex dump (first 32 bytes):
00 00 00 c0 a8 ba 2d ff 00 00 00 00 00 00 00 00 ......-.........
00 00 40 08 00 00 00 00 00 00 25 b3 a8 ba 2d ff ..@.......%...-.
backtrace (crc 36063c4f):
__kmalloc_noprof+0x48f/0x890
idpf_vc_core_init+0x6ce/0x9b0 [idpf]
idpf_vc_event_task+0x1fb/0x350 [idpf]
process_one_work+0x226/0x6d0
worker_thread+0x19e/0x340
kthread+0x10f/0x250
ret_from_fork+0x251/0x2b0
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: fix memory leak in update_eth_regs_async()
When asynchronously writing to the device registers and if usb_submit_urb()
fail, the code fail to release allocated to this point resources. |
| A weakness has been identified in Free5GC 4.1.0. Affected is the function HandleRegistrationComplete of the file internal/gmm/handler.go of the component AMF. Executing a manipulation can lead to denial of service. The attack may be performed from remote. This patch is called 52e9386401ce56ea773c5aa587d4cdf7d53da799. It is best practice to apply a patch to resolve this issue. |
| A security flaw has been discovered in pygments up to 2.19.2. The impacted element is the function AdlLexer of the file pygments/lexers/archetype.py. The manipulation results in inefficient regular expression complexity. The attack is only possible with local access. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| DeepDiff is a project focused on Deep Difference and search of any Python data. From version 5.0.0 to before version 8.6.2, the pickle unpickler _RestrictedUnpickler validates which classes can be loaded but does not limit their constructor arguments. A few of the types in SAFE_TO_IMPORT have constructors that allocate memory proportional to their input (builtins.bytes, builtins.list, builtins.range). A 40-byte pickle payload can force 10+ GB of memory, which crashes applications that load delta objects or call pickle_load with untrusted data. This issue has been patched in version 8.6.2. |
| SimpleJWT is a simple JSON web token library written in PHP. Prior to version 1.1.1, an unauthenticated attacker can perform a Denial of Service via JWE header tampering when PBES2 algorithms are used. Applications that call JWE::decrypt() on attacker-controlled JWEs using PBES2 algorithms are affected. This issue has been patched in version 1.1.1. |
| OpenClaw versions prior to 2026.3.2 contain an archive extraction vulnerability in the tar.bz2 installer path that bypasses safety checks enforced on other archive formats. Attackers can craft malicious tar.bz2 skill archives to bypass special-entry blocking and extracted-size guardrails, causing local denial of service during skill installation. |
| pypdf is a free and open-source pure-python PDF library. Versions prior to 6.9.1 allow an attacker to craft a malicious PDF which leads to long runtimes and/or large memory usage. Exploitation requires accessing an array-based stream with many entries. This issue has been fixed in version 6.9.1. |
| UltraJSON is a fast JSON encoder and decoder written in pure C with bindings for Python 3.7+. Versions 5.4.0 through 5.11.0 contain an accumulating memory leak in JSON parsing large (outside of the range [-2^63, 2^64 - 1]) integers. The leaked memory is a copy of the string form of the integer plus an additional NULL byte. The leak occurs irrespective of whether the integer parses successfully or is rejected due to having more than sys.get_int_max_str_digits() digits, meaning that any sized leak per malicious JSON can be achieved provided that there is no limit on the overall size of the payload. Any service that calls ujson.load()/ujson.loads()/ujson.decode() on untrusted inputs is affected and vulnerable to denial of service attacks. This issue has been fixed in version 5.12.0. |
| A flaw was identified in the interactive shell of the xmllint utility, part of the libxml2 project, where memory allocated for user input is not properly released under certain conditions. When a user submits input consisting only of whitespace, the program skips command execution but fails to free the allocated buffer. Repeating this action causes memory to continuously accumulate. Over time, this can exhaust system memory and terminate the xmllint process, creating a denial-of-service condition on the local system. |
| OpenWrt Project is a Linux operating system targeting embedded devices. In versions prior to both 24.10.6 and 25.12.1, the jp_get_token function, which performs lexical analysis by breaking input expressions into tokens, contains a memory leak vulnerability when extracting string literals, field labels, and regular expressions using dynamic memory allocation. These extracted results are stored in a jp_opcode struct, which is later copied to a newly allocated jp_opcode object via jp_alloc_op. During this transfer, if a string was previously extracted and stored in the initial jp_opcode, it is copied to the new allocation but the original memory is never freed, resulting in a memory leak. This issue has been fixed in versions 24.10.6 and 25.12.1. |
