| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Command Injection in TOTOLINK X5000R router with firmware v9.1.0u.6118_B20201102, and TOTOLINK A720R router with firmware v4.1.5cu.470_B20200911 allows remote attackers to execute arbitrary OS commands by sending a modified HTTP request. This occurs because the function executes glibc's system function with untrusted input. In the function, "ip" parameter is directly passed to the attacker, allowing them to control the "ip" field to attack the OS. |
| Command Injection in TOTOLINK X5000R router with firmware v9.1.0u.6118_B20201102, and TOTOLINK A720R router with firmware v4.1.5cu.470_B20200911 allows remote attackers to execute arbitrary OS commands by sending a modified HTTP request. This occurs because the function executes glibc's system function with untrusted input. In the function, "command" parameter is directly passed to the attacker, allowing them to control the "command" field to attack the OS. |
| Command Injection in Tenda G1 and G3 routers with firmware versions v15.11.0.17(9502)_CN or v15.11.0.16(9024)_CN allows remote attackers to execute arbitrary OS commands via a crafted "action/umountUSBPartition" request. This occurs because the "formSetUSBPartitionUmount" function executes the "doSystemCmd" function with untrusted input. |
| Command Injection in Tenda G0 routers with firmware versions v15.11.0.6(9039)_CN and v15.11.0.5(5876)_CN , and Tenda G1 and G3 routers with firmware versions v15.11.0.17(9502)_CN or v15.11.0.16(9024)_CN allows remote attackers to execute arbitrary OS commands via a crafted action/setDebugCfg request. This occurs because the "formSetDebugCfg" function executes glibc's system function with untrusted input. |
| SAP NetWeaver AS for ABAP (RFC Gateway), versions - KRNL32NUC - 7.22,7.22EXT, KRNL64NUC - 7.22,7.22EXT,7.49, KRNL64UC - 8.04,7.22,7.22EXT,7.49,7.53,7.73, KERNEL - 7.22,8.04,7.49,7.53,7.73,7.77,7.81,7.82,7.83, allows an unauthenticated attacker without specific knowledge of the system to send a specially crafted packet over a network which will trigger an internal error in the system due to improper input validation in method ThCpicDtCreate () causing the system to crash and rendering it unavailable. In this attack, no data in the system can be viewed or modified. |
| SAP NetWeaver AS for ABAP (RFC Gateway), versions - KRNL32NUC - 7.22,7.22EXT, KRNL64NUC - 7.22,7.22EXT,7.49, KRNL64UC - 8.04,7.22,7.22EXT,7.49,7.53,7.73, KERNEL - 7.22,8.04,7.49,7.53,7.73,7.77,7.81,7.82,7.83, allows an unauthenticated attacker without specific knowledge of the system to send a specially crafted packet over a network which will trigger an internal error in the system due to improper input validation in method ThCPIC() causing the system to crash and rendering it unavailable. In this attack, no data in the system can be viewed or modified. |
| SAP NetWeaver ABAP Server and ABAP Platform (Dispatcher), versions - KRNL32NUC - 7.22,7.22EXT, KRNL32UC - 7.22,7.22EXT, KRNL64NUC - 7.22,7.22EXT,7.49, KRNL64UC - 8.04,7.22,7.22EXT,7.49,7.53,7.73, KERNEL - 7.22,8.04,7.49,7.53,7.73,7.77,7.81,7.82,7.83, allows an unauthenticated attacker without specific knowledge of the system to send a specially crafted packet over a network which will trigger an internal error in the system due to improper input validation in method DpRTmPrepareReq() causing the system to crash and rendering it unavailable. In this attack, no data in the system can be viewed or modified. |
| SAP Internet Graphics Service, versions - 7.20,7.20EXT,7.53,7.20_EX2,7.81, allows an unauthenticated attacker after retrieving an existing system state value can submit a malicious IGS request over a network which due to insufficient input validation in method ChartInterpreter::DoIt() which will trigger an internal memory corruption error in the system causing the system to crash and rendering it unavailable. In this attack, no data in the system can be viewed or modified. |
| SAP Internet Graphics Service, versions - 7.20,7.20EXT,7.53,7.20_EX2,7.81, allows an unauthenticated attacker after retrieving an existing system state value can submit a malicious IGS request over a network which due to insufficient input validation in method CMiniXMLParser::Parse() which will trigger an internal memory corruption error in the system causing the system to crash and rendering it unavailable. In this attack, no data in the system can be viewed or modified. |
| SAP Internet Graphics Service, versions - 7.20,7.20EXT,7.53,7.20_EX2,7.81, allows an unauthenticated attacker after retrieving an existing system state value can submit a malicious IGS request over a network which due to insufficient input validation in method IgsData::freeMemory() which will trigger an internal memory corruption error in the system causing the system to crash and rendering it unavailable. In this attack, no data in the system can be viewed or modified. |
| SAP Internet Graphics Service, versions - 7.20,7.20EXT,7.53,7.20_EX2,7.81, allows an unauthenticated attacker after retrieving an existing system state value can submit a malicious IGS request over a network which due to insufficient input validation in method CiXMLIStreamRawBuffer::readRaw () which will trigger an internal memory corruption error in the system causing the system to crash and rendering it unavailable. In this attack, no data in the system can be viewed or modified. |
| SAP Internet Graphics Service, versions - 7.20,7.20EXT,7.53,7.20_EX2,7.81, allows an unauthenticated attacker after retrieving an existing system state value can submit a malicious IGS request over a network which due to insufficient input validation in method CXmlUtility::CheckLength() which will trigger an internal memory corruption error in the system causing the system to crash and rendering it unavailable. In this attack, no data in the system can be viewed or modified. |
| SAP Internet Graphics Service, versions - 7.20,7.20EXT,7.53,7.20_EX2,7.81, allows an unauthenticated attacker after retrieving an existing system state value can submit a malicious IGS request over a network which due to insufficient input validation in method CDrawRaster::LoadImageFromMemory() which will trigger an internal memory corruption error in the system causing the system to crash and rendering it unavailable. In this attack, no data in the system can be viewed or modified. |
| SAP Internet Graphics Service, versions - 7.20,7.20EXT,7.53,7.20_EX2,7.81, allows an unauthenticated attacker after retrieving an existing system state value can submit a malicious IGS request over a network which due to insufficient input validation in method Ups::AddPart() which will trigger an internal memory corruption error in the system causing the system to crash and rendering it unavailable. In this attack, no data in the system can be viewed or modified. |
| The Cron job tab in EasyCorp ZenTao 12.5.3 allows remote attackers (who have admin access) to execute arbitrary code by setting the type parameter to System. |
| Datakit Software libraries CatiaV5_3dRead, CatiaV6_3dRead, Step3dRead, Ug3dReadPsr, Jt3dReadPsr modules in KeyShot Versions v10.1 and prior lack proper validation of user-supplied data when parsing CATPart files. This could result in an out-of-bounds write past the end of an allocated structure. An attacker could leverage this vulnerability to execute code in the context of the current process. |
| When JTEKT Corporation TOYOPUC PLC versions PC10G-CPU, 2PORT-EFR, Plus CPU, Plus EX, Plus EX2, Plus EFR, Plus EFR2, Plus 2P-EFR, PC10P-DP, PC10P-DP-IO, Plus BUS-EX, Nano 10GX, Nano 2ET,PC10PE, PC10PE-16/16P, PC10E, FL/ET-T-V2H, PC10B,PC10B-P, Nano CPU, PC10P, and PC10GE receive an invalid frame, the outside area of a receive buffer for FL-net are overwritten. As a result, the PLC CPU detects a system error, and the affected products stop. |
| Omron CX-One Versions 4.60 and prior, including CX-Server Versions 5.0.29.0 and prior, are vulnerable to a stack-based buffer overflow, which may allow an attacker to execute arbitrary code. |
| The affected product is vulnerable to an out-of-bounds write, which may result in corruption of data or code execution on the Welch Allyn medical device management tools (Welch Allyn Service Tool: versions prior to v1.10, Welch Allyn Connex Device Integration Suite – Network Connectivity Engine (NCE): versions prior to v5.3, Welch Allyn Software Development Kit (SDK): versions prior to v3.2, Welch Allyn Connex Central Station (CS): versions prior to v1.8.6, Welch Allyn Service Monitor: versions prior to v1.7.0.0, Welch Allyn Connex Vital Signs Monitor (CVSM): versions prior to v2.43.02, Welch Allyn Connex Integrated Wall System (CIWS): versions prior to v2.43.02, Welch Allyn Connex Spot Monitor (CSM): versions prior to v1.52, Welch Allyn Spot Vital Signs 4400 Device (Spot 4400) / Welch Allyn Spot 4400 Vital Signs Extended Care Device: versions prior to v1.11.00). |
| A vulnerability has been identified in Simcenter Femap 2020.2 (All versions < V2020.2.MP3), Simcenter Femap 2021.1 (All versions < V2021.1.MP3). The femap.exe application lacks proper validation of user-supplied data when parsing FEMAP files. This could result in an out of bounds write past the end of an allocated structure, a different vulnerability than CVE-2021-27387. An attacker could leverage this vulnerability to execute code in the context of the current process. (ZDI-CAN-12820) |
