| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An improper use of a validation framework when processing incoming genuine BGP packets within Juniper Networks RPD (routing protocols process) daemon allows an attacker to crash RPD thereby causing a Denial of Service (DoS) condition. This framework requires these packets to be passed. By continuously sending any of these types of formatted genuine packets, an attacker can repeatedly crash the RPD process causing a sustained Denial of Service. Authentication to the BGP peer is not required. This issue can be initiated or propagated through eBGP and iBGP and can impact devices in either modes of use as long as the devices are configured to support the compromised framework and a BGP path is activated or active. This issue affects: Juniper Networks Junos OS 16.1 versions 16.1R7-S6 and later versions prior to 16.1R7-S8; 17.3 versions 17.3R2-S5, 17.3R3-S6 and later versions prior to 17.3R3-S8; 17.4 versions 17.4R2-S7, 17.4R3 and later versions prior to 17.4R2-S11, 17.4R3-S2; 18.1 versions 18.1R3-S7 and later versions prior to 18.1R3-S10; 18.2 versions 18.2R2-S6, 18.2R3-S2 and later versions prior to 18.2R2-S7, 18.2R3-S5; 18.2X75 versions 18.2X75-D12, 18.2X75-D32, 18.2X75-D33, 18.2X75-D51, 18.2X75-D60, 18.2X75-D411, 18.2X75-D420 and later versions prior to 18.2X75-D32, 18.2X75-D33, 18.2X75-D420, 18.2X75-D52, 18.2X75-D60, 18.2X75-D65, 18.2X75-D70;(*1) 18.3 versions 18.3R1-S6, 18.3R2-S3, 18.3R3 and later versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions 18.4R1-S5, 18.4R2-S4, 18.4R3 and later versions prior to 18.4R1-S7, 18.4R2-S5, 18.4R3-S3(*2); 19.1 versions 19.1R1-S3, 19.1R2 and later versions prior to 19.1R1-S5, 19.1R2-S2, 19.1R3-S2; 19.2 versions 19.2R1-S2, 19.2R2 and later versions prior to 19.2R1-S5, 19.2R2, 19.2R3; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S2, 19.4R2, 19.4R3; 20.1 versions prior to 20.1R1-S1, 20.1R2. This issue does not affect Junos OS prior to 16.1R1. This issue affects IPv4 and IPv6 traffic. |
| Buffer Overflow in LibTiff v4.0.10 allows attackers to cause a denial of service via the "TIFFVGetField" funtion in the component 'libtiff/tif_dir.c'. |
| Buffer Overflow in LibTiff v4.0.10 allows attackers to cause a denial of service via the "invertImage()" function in the component "tiffcrop". |
| Buffer Overflow in Netwide Assembler (NASM) v2.15.xx allows attackers to cause a denial of service via 'crc64i' in the component 'nasmlib/crc64'. This issue is different than CVE-2019-7147. |
| An invalid memory access in the decode function in iptc.cpp of Exiv2 0.27.99.0 allows attackers to cause a denial of service (DOS) via a crafted tif file. |
| Exiv2 0.27.99.0 has a global buffer over-read in Exiv2::Internal::Nikon1MakerNote::print0x0088 in nikonmn_int.cpp which can result in an information leak. |
| Buffer Overflow vulnerability in function H5S_close in H5S.c in HDF5 1.10.4 allows remote attackers to run arbitrary code via creation of crafted file. |
| Buffer Overflow vulnerability in function H5S_close in H5S.c in HDF5 1.10.4 allows remote attackers to run arbitrary code via creation of crafted file. |
| Libjpeg-turbo all version have a stack-based buffer overflow in the "transform" component. A remote attacker can send a malformed jpeg file to the service and cause arbitrary code execution or denial of service of the target service. |
| This vulnerability allows remote attackers to execute arbitrary code on affected installations of Foxit Studio Photo 3.6.6.922. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of CR2 files. The issue results from the lack of proper validation of user-supplied data, which can result in a memory corruption condition. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-11230. |
| This vulnerability allows local attackers to escalate privileges on affected installations of Parallels Desktop 15.1.4. An attacker must first obtain the ability to execute high-privileged code on the target guest system in order to exploit this vulnerability. The specific flaw exists within the handling of network packets. The issue results from the lack of proper validation of user-supplied data, which can result in a memory corruption condition. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of the hypervisor. Was ZDI-CAN-11253. |
| A heap-based buffer overflow was found in QEMU through 5.0.0 in the SDHCI device emulation support. It could occur while doing a multi block SDMA transfer via the sdhci_sdma_transfer_multi_blocks() routine in hw/sd/sdhci.c. A guest user or process could use this flaw to crash the QEMU process on the host, resulting in a denial of service condition, or potentially execute arbitrary code with privileges of the QEMU process on the host. |
| The Kommbox component in Rangee GmbH RangeeOS 8.0.4 could allow a local authenticated attacker to escape from the restricted environment and execute arbitrary code due to unrestricted context menus being accessible. |
| Mozilla developers reported memory safety bugs present in Firefox 80. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 81. |
| An issue was discovered on Samsung mobile devices with Q(10.0) software. Attackers can trigger an out-of-bounds access and device reset via a 4K wallpaper image because ImageProcessHelper mishandles boundary checks. The Samsung ID is SVE-2020-18056 (July 2020). |
| An issue was discovered on Samsung mobile devices with P(9.0) and Q(10.0) (Exynos 7885 chipsets) software. The Bluetooth Low Energy (BLE) component has a buffer overflow with a resultant deadlock or crash. The Samsung ID is SVE-2020-16870 (July 2020). |
| An issue was discovered in Xen through 4.13.x, allowing Arm guest OS users to cause a hypervisor crash because of a missing alignment check in VCPUOP_register_vcpu_info. The hypercall VCPUOP_register_vcpu_info is used by a guest to register a shared region with the hypervisor. The region will be mapped into Xen address space so it can be directly accessed. On Arm, the region is accessed with instructions that require a specific alignment. Unfortunately, there is no check that the address provided by the guest will be correctly aligned. As a result, a malicious guest could cause a hypervisor crash by passing a misaligned address. A malicious guest administrator may cause a hypervisor crash, resulting in a Denial of Service (DoS). All Xen versions are vulnerable. Only Arm systems are vulnerable. x86 systems are not affected. |
| An issue was discovered in Xen through 4.13.x, allowing x86 HVM guest OS users to cause a hypervisor crash. An inverted conditional in x86 HVM guests' dirty video RAM tracking code allows such guests to make Xen de-reference a pointer guaranteed to point at unmapped space. A malicious or buggy HVM guest may cause the hypervisor to crash, resulting in Denial of Service (DoS) affecting the entire host. Xen versions from 4.8 onwards are affected. Xen versions 4.7 and earlier are not affected. Only x86 systems are affected. Arm systems are not affected. Only x86 HVM guests using shadow paging can leverage the vulnerability. In addition, there needs to be an entity actively monitoring a guest's video frame buffer (typically for display purposes) in order for such a guest to be able to leverage the vulnerability. x86 PV guests, as well as x86 HVM guests using hardware assisted paging (HAP), cannot leverage the vulnerability. |
| Multiple buffer overflow vulnerabilities in REST API in Brocade Fabric OS versions v8.2.1 through v8.2.1d, and 8.2.2 versions before v8.2.2c could allow remote unauthenticated attackers to perform various attacks. |
| RIOT 2020.04 has a buffer overflow in the base64 decoder. The decoding function base64_decode() uses an output buffer estimation function to compute the required buffer capacity and validate against the provided buffer size. The base64_estimate_decode_size() function calculates the expected decoded size with an arithmetic round-off error and does not take into account possible padding bytes. Due to this underestimation, it may be possible to craft base64 input that causes a buffer overflow. |
