| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_bpf: reject dev-bound programs bound to a different device
cls_bpf_prog_from_efd() obtained a SCHED_CLS program via
bpf_prog_get_type_dev() but never verified that a device-bound (offloaded)
program's bound netdev matches the TC netdev the classifier is being
attached to. This let a program loaded with prog_ifindex for device A be
attached via cls_bpf + skip_sw to device B; deleting device A then
destroyed the program's offload state while it was still attached to
device B, triggering a netdevsim WARN (panic with panic_on_warn=1).
Mirror the XDP attach path (net/core/dev.c) and reject the attach with
-EINVAL when a dev-bound program's bound device does not match the
target device. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: ti: am65-cpsw-nuss: Fix port_id extraction from SRC TAG
On the packet reception path, the ID of the MAC Port on which the packet
was received, is embedded in the RX DMA Descriptor's metadata. The ID is
extracted using the helper function cppi5_desc_get_tags_ids() which fills
in the 16-bit Source Tag into the 'port_id' variable. However, it is only
the lower 8-bits of the 16-bit Source Tag that represent the MAC Port ID,
while the upper 8-bits are Hardware-Reserved and carry an arbitrary value.
With the existing logic, sporadic kernel crash is observed due to the
subsequent driver code accessing out-of-bound memory because of an invalid
port_id.
Hence, fix the port_id extraction logic to use only the lower 8-bits of the
Source Tag as the MAC Port ID. |
| In the Linux kernel, the following vulnerability has been resolved:
macvlan: inherit needed_headroom and needed_tailroom from lowerdev
macvlan devices inherit hard_header_len from lowerdev during macvlan_init(),
but leave needed_headroom and needed_tailroom set to 0.
When the underlying lowerdev requires extra headroom or tailroom for
headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx
headroom), upper layers calculating packet headroom and tailroom fail to
reserve sufficient space.
This can result in reallocation overhead, skb headroom underflows, or KASAN
slab-use-after-free crashes when dev_hard_header() / macvlan_hard_header()
prepends header data or when lower devices append tailroom.
Fix this by:
1. Inheriting needed_headroom and needed_tailroom from lowerdev in macvlan_init().
2. Propagating needed_headroom and needed_tailroom updates to attached macvlans
in macvlan_device_event() when receiving NETDEV_FEAT_CHANGE events. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Improve CCA CPRB length and overflow checks
The xcrb_msg_to_type6cprb_msgx() function lacks proper input
validation, creating security vulnerabilities:
1. Integer overflow after CEIL4 alignment: Signed int variables could
overflow during 4-byte boundary alignment, causing undersized
buffer allocations or incorrect bounds checking.
2. Missing minimum size validation: The CPRBX structure is copied from
userspace without verifying sufficient buffer length. Undersized
buffers cause uninitialized memory access when reading structure
fields like cprbx.cprb_len and cprbx.domain.
3. Arithmetic overflow in sum calculations: Adding control block and
data block sizes could overflow, bypassing size checks and enabling
buffer overflows.
Fix by using size_t for length calculations, adding U32_MAX boundary
checks after alignment, validating minimum control block size before
copying from userspace, and detecting sum calculation overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: cs40l50-vibra - validate custom data from user space
cs40l50_add() copies the custom data of an FF_PERIODIC/FF_CUSTOM effect
straight from the ff_effect the user passed to EVIOCSFF, without
requiring it to hold anything:
work_data.custom_data = memdup_array_user(periodic->custom_data,
periodic->custom_len,
sizeof(s16));
work_data.custom_len = periodic->custom_len;
The driver then reads two words out of that buffer: custom_data[0] as the
waveform bank in cs40l50_effect_bank_set(), and custom_data[1] as the
index within the bank in cs40l50_effect_index_set(). Neither read is
covered by a length check, and custom_len is fully user controlled:
- custom_len == 0 makes memdup_array_user() call memdup_user() with a
length of zero, which returns ZERO_SIZE_PTR rather than an error, so
custom_data[0] dereferences it.
- custom_len == 1 allocates two bytes. A bank of ROM or RAM keeps
effect->type out of the OWT case, and custom_data[1] is then read one
word past the allocation.
The bank value itself is also mishandled. It is masked with
CS40L50_CUSTOM_DATA_MASK (0xffff) but stored in an s16, so a
custom_data[0] of 0x8000 or above wraps to a negative value that passes
the "bank_type >= CS40L50_WVFRM_BANK_NUM" test.
cs40l50_effect_index_set() indexes vib->dsp.banks[] with it before the
switch statement's default case gets a chance to reject it:
base_index = vib->dsp.banks[effect->type].base_index;
max_index = vib->dsp.banks[effect->type].max_index;
Require the two words the driver reads to be present, and hold the masked
bank in a u32 so the existing upper-bound test covers the whole range.
The da7280 haptic driver already range checks custom_len this way. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: clear fb_info->mode before deleting a videomode
fb_set_var() can delete a mode from info->modelist when userspace
passes FB_ACTIVATE_INV_MODE through FBIOPUT_VSCREENINFO. The code
checks that the mode being deleted is not the current info->var and
that fbcon is not using it, but it does not check fb_info->mode.
fb_info->mode may still point into the modelist entry being deleted.
If the entry is freed, later mode sysfs reads through show_mode() can
dereference a stale pointer.
Clear fb_info->mode before calling fb_delete_videomode() when it
matches the mode being removed. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fastopen: only mark MPTFO subflows with SYN data
Passive TCP Fast Open accepts a valid-cookie SYN even when it carries
no data. In that case the child socket's receive queue is intentionally
left empty.
mptcp_fastopen_subflow_synack_set_params() set is_mptfo before checking
for queued SYN data. That made data-less TFO SYNs hit a WARN and, if
the warning was non-fatal, left stale MPTFO state behind. The stale
flag could later trigger a state-confusion bug in
check_fully_established().
Only mark the subflow as MPTFO after confirming that an SKB was queued.
Return quietly when the receive queue is empty.
Note that mptcp_subflow_context's is_mptfo field is now not just about
subflows where the TFO was present, but about MPTFO subflow that
consumed SYN data. Only having a valid cookie but not carrying data is
not really "doing TFO". |
| In the Linux kernel, the following vulnerability has been resolved:
Input: focaltech - fix array out-of-bounds in focaltech_process_rel_packet
Make finger2 (and also finger1) unsigned, so that if the finger index in
the packet is 0 then subtracting 1 creates an array index which overflows
above the existing check for FOC_MAX_FINGERS, as the existing comment says
it should, instead of writing to state->fingers[-1]. |
| Editor Arbitrary File Deletion in Fluent Boards Pro <= 2.0.11 versions. |
| Unauthenticated SQL Injection in Visitor Traffic Real Time Statistics Pro <= 11.17 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: avoid UAF on sc->tempip in xrep_tempfile_create
LOLLM noticed a potential UAF if the tempfile creation code fails after
it set sc->tempip. Fix that. |
| Subscriber Sensitive Data Exposure in SureFeedback Client Site <= 1.2.12 versions. |
| Unauthenticated SQL Injection in Epayco <= 8.4.6 versions. |
| A flaw was found in glibc. This vulnerability allows a remote attacker to cause a denial of service (DoS) by providing specially crafted text to an application that converts text from SHIFT_JISX0213 to UCS-4. The crafted input can lead to a continuous loop of processing, preventing the application from making progress and consuming resources. Exploitation requires specific conditions, including the application retrying conversion after an error with limited output space. |
| A Spring WebFlux application that supports WebSocket connections may expose indirectly sensitive user information by including request headers in an exception reason.
Spring Framework 7.0.0 - 7.0.8
Spring Framework 6.2.0 - 6.2.19
Spring Framework 6.1.0 - 6.1.28
Spring Framework 6.0.0 - 6.0.30
Spring Framework 5.3.0 - 5.3.49
Spring Framework 5.2.25.RELEASE and earlier |
| A stored cross-site scripting (XSS) vulnerability in Bynder v0.1.394 allows attackers to execute arbitrary web scripts or HTML via a crafted payload. NOTE: this is disputed by the Supplier because v0.1.394 was never a valid version number, and because there is no available information on what v0.1.394 system or environment may have been used for this XSS finding. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: fix multiple unsafe decodes in decode_locker()
decode_locker() in cls_lock_client.c contains three unsafe decode
operations that allow a malicious or compromised OSD to trigger
slab-out-of-bounds reads:
1. ceph_decode_copy() at the locker_id_t name field has no preceding
bounds check. With p == end after ceph_start_decoding() accepts
struct_len=0, this reads sizeof(ceph_entity_name) = 9 bytes past
the validated buffer boundary.
2. *p += sizeof(struct ceph_timespec) after the locker_info_t header
is an unchecked pointer advance. A malicious OSD can position p
past end, causing all subsequent _safe checks to pass against a
bogus boundary.
3. len = ceph_decode_32(p) has no preceding bounds check, and the
immediately following *p += len is uncapped. A malicious OSD can
send len=0xffffffff, advancing p gigabytes past end and escaping
the decode window entirely.
Fix all three by replacing bare operations with their safe variants:
ceph_decode_copy -> ceph_decode_copy_safe
*p += sizeof(...) -> ceph_decode_skip_n
ceph_decode_32(p) -> ceph_decode_32_safe
*p += len -> ceph_decode_skip_n
A new label is added to return -EINVAL on any bounds violation.
-EINVAL is appropriate here: the data received from the OSD
is structurally malformed, which is an invalid argument to the decode
contract regardless of whether the caller or the wire is at fault.
Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
deployment can trigger this against any kernel client that issues the
lock.get_info class method (e.g. during RBD exclusive lock acquisition)
without any further privileges beyond OSD session establishment.
[ idryomov: use ceph_decode_skip_string() to skip description, trim
changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - block s_input when F54 queue is busy
Changing the input (diagnostic report type) mid-stream changes the
report size. Since V4L2 buffers are allocated based on the size at
stream start, changing the input while streaming could lead to a
heap buffer overflow if the new size is larger than the allocated
buffers.
Prevent this by blocking VIDIOC_S_INPUT with -EBUSY if the V4L2 queue
is busy (streaming). |
| In the Linux kernel, the following vulnerability has been resolved:
clk: spacemit: k3: set hdma clock as critical
HDMA clock is responsible for the internal TCM access path of X100 RISC-V
core, so set the clock flag as critical to prevent it from being shut off,
otherwise the Linux system will hang, for example in the case of a vector
instruction access generates a page fault. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix hanging __ceph_get_caps() with stale mds_wanted
A reader can hang forever in __ceph_get_caps() when the client no
longer holds `FILE_RD`, but local cap state still says that the
capability is already wanted (via `mds_wanted`).
One way to trigger this is through MDS cap revocation. If another
client performs a conflicting operation, the MDS can revoke `FILE_RD`
from the reader; the next read then has to reacquire `FILE_RD`. If
the cap update that should request `FILE_RD` never reaches the MDS
after `cap->mds_wanted` was raised, the reader is left holding only
non-file caps while local `mds_wanted` still includes the file read
caps.
In that state, try_get_cap_refs() sees `need <= mds_wanted` and
returns 0, so __ceph_get_caps() just waits on `i_cap_wq`. If the cap
update that was supposed to request `FILE_RD never reaches the MDS
after `cap->mds_wanted was` raised, no further request is sent and the
waiter can sleep indefinitely until unrelated cap traffic happens to
wake it up.
The ordering issue is that `cap->mds_wanted` is updated in
__prep_cap() before the `CEPH_MSG_CLIENT_CAPS message` is actually
queued for send. That makes one field serve two different meanings at
once: what this client wants, and what the client believes the MDS
already knows it wants.
A proper fix would be to split those states and track whether a cap
update is actually in flight or has been observed by the MDS.
However, simply moving the `cap->mds_wanted assignment` later would
not be sufficient: queueing the message in the messenger does not
guarantee that the MDS processed that specific wanted set, and
reconnect or message loss can still invalidate that assumption.
Fixing that properly would require a larger rework of the cap state
machine.
To allow simpler backports to stable kernels, this patch implements a
simpler workaround:
- stop waiting forever in __ceph_get_caps(); after a bounded wait,
fall back to the renew path
- make ceph_renew_caps() issue a synchronous `OPEN` request whenever
the inode still does not actually hold the wanted caps, instead of
only calling ceph_check_caps()
The extra issued-vs-wanted check in ceph_renew_caps() is necessary
because the previous test only checked whether the inode still had any
real caps at all. That is not enough after revocation: the client can
still hold something like `pLs` and yet be missing `FILE_RD`
completely. In that case, falling back to ceph_check_caps() is not
sufficient, because it still trusts `cap->mds_wanted` and may resend
nothing. By requiring `(issued & wanted) == wanted` before taking the
asynchronous path, the code only uses ceph_check_caps() when the
`wanted caps` are already actually issued. Otherwise, it sends the
synchronous `OPEN` renew.
This preserves the existing asynchronous fast path when the wanted
caps are already issued, avoids changing cap-state semantics, and
fixes the hang by guaranteeing that a stalled waiter eventually
retries through a path that does not rely on the stale `mds_wanted`
state.
[ idryomov: move CEPH_GET_CAPS_WAIT_TIMEOUT from libceph.h to
mds_client.h, formatting ] |
