Export limit exceeded: 381158 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (381158 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74482 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: unlock i_mmap_rwsem before releasing after-split folios __folio_split() keeps dereferencing the mapping after the split: shmem_uncharge(mapping->host) and remap_page() while the folios are still frozen/locked, and i_mmap_unlock_read(mapping) at the very end, after the after-split folios have been unlocked and freed. Nothing holds an inode reference across that. The split relies on @folio -- which the beyond-EOF drop loop never removes, as it starts at folio_next(folio) -- staying locked and in the page cache to hold off eviction. But the unlock loop unlocks @folio before i_mmap_unlock_read() runs. If the caller's @lock_at is a tail beyond EOF, as memory_failure() passes when splitting a poisoned tail of a shmem THP that reaches past i_size during truncation, it too is gone from the page cache; so once @folio is unlocked no locked, in-cache folio pins the inode, and a concurrent final iput() can evict and RCU-free it before i_mmap_unlock_read() touches i_mmap_rwsem: BUG: KASAN: slab-use-after-free in __up_read+0x634/0x790 i_mmap_unlock_read include/linux/fs.h:537 [inline] __folio_split+0x732/0x1640 mm/huge_memory.c:4100 try_to_split_thp_page+0xab/0x390 mm/memory-failure.c:1675 memory_failure+0x1394/0x26e0 mm/memory-failure.c:2470 Freed by task 4601: shmem_free_in_core_inode+0x54/0xb0 mm/shmem.c:5177 evict+0x57f/0xac0 fs/inode.c:870 Do every mapping dereference while @folio still pins the inode: drop i_mmap_rwsem right after remap_page(), before the loop that unlocks and frees the after-split folios, and clear @mapping so the exit path does not unlock it again. shmem_uncharge() and remap_page() already run before that point, so after this nothing past the unlock loop touches the inode or the mapping. This is now a rule the split depends on, alongside keeping @folio frozen until the page cache is updated: no inode or mapping dereference once the after-split folios start being unlocked. | ||||
| CVE-2026-74481 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/page_reporting: use system_freezable_wq to fix UAF during suspend During PM freeze (e.g. S3 suspend or S4 hibernation), device drivers like virtio_balloon reset their underlying virtio devices and delete their virtqueues via vdev->config->del_vqs(). However, page reporting work (page_reporting_process) was scheduled on the global system_wq. Because system_wq lacks the WQ_FREEZABLE flag, the PM freezer skips it, leaving page_reporting_process active during suspend. If pages are freed into the buddy allocator while suspending (for example, when core MM invokes the balloon shrinker during S4 hibernation image saving), page reporting triggers virtballoon_free_page_report() on deleted virtqueues, resulting in a Use-After-Free / General Protection Fault: [ 196.795226] general protection fault, probably for non-canonical address 0xaa1436fe70dae6df: 0000 [#1] SMP NOPTI [ 196.825967] Workqueue: events page_reporting_process [ 196.831038] RIP: 0010:virtqueue_add_split+0x233/0x4c0 [virtio_ring] [ 196.927073] virtballoon_free_page_report+0x3a/0xe0 [virtio_balloon] [ 196.946943] page_reporting_process+0x370/0x4f0 Fix this by switching page reporting work to system_freezable_wq. This ensures that the PM freezer pauses page_reporting_process before device drivers destroy their reporting virtqueues. Because the reporting worker is frozen, memory reclamation/freeing (e.g. via shrinker execution) can safely return pages to MM during freeze without triggering unfrozen reporting work on deleted virtqueues. This aligns with the driver's existing design. The comment in virtballoon_freeze() states: /* * The workqueue is already frozen by the PM core before this * function is called. */ Testing: I have verified these fixes using Google’s virtualization infrastructure by running continuous suspend/resume iterations (40+ cycles) while churning memory using stress-ng (`stress-ng --vm 4 --vm-bytes 60% --timeout 1`) to constantly create free pages for the buddy allocator. We also set the `page_reporting_order` parameter to 0 to make the page reporting worker highly sensitive, forcing it to pick up any 4K free pages. This confirmed that the UAF crashes are no longer reproducible. | ||||
| CVE-2026-74480 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: stop fast-leave after deleting a port group br_multicast_leave_group() iterates mp->ports with pp = &p->next in its fast-leave path. After br_multicast_del_pg() removes p, continuing the loop advances pp through the deleted entry. If multicast-to-unicast was enabled, the bridge can hold multiple port groups for the same port and group with different source MAC addresses. Once multicast-to-unicast is disabled, br_port_group_equal() matches those entries by port only. A fast leave can then delete one entry and continue from its stale next pointer, leaving mp->ports pointing at a deleted port group. Fast leave only needs to remove one matching port group. Break after br_multicast_del_pg() so the loop stops before dereferencing the removed entry. | ||||
| CVE-2026-74473 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: use pskb_network_may_pull() in route_shortcircuit() route_shortcircuit() currently calls pskb_may_pull(skb, sizeof(struct iphdr)) (or ipv6hdr), which checks if bytes are available starting from skb->data. However, in vxlan_xmit(), skb->data points to the MAC header, so skb_network_offset(skb) is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, 20) only checks 20 bytes from skb->data (which is 14 bytes MAC header + 6 bytes of IP header), leaving the rest of the IP header potentially un-pulled in non-linear frags. Subsequent dereferences of ip_hdr(skb)->daddr can read beyond the pulled linear buffer length. Fix this by using pskb_network_may_pull(), which adds skb_network_offset(skb) to the length check to ensure the full network header is present in the linear buffer. | ||||
| CVE-2026-74472 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ublk: reset kernel-owned dev_info fields in ublk_ctrl_add_dev() ublk_ctrl_add_dev() memcpy()s the userspace ublksrv_ctrl_dev_info into ub->dev_info and then fixes up the fields the driver owns, but misses ->state and ->ublksrv_pid. A device added with ->state = UBLK_S_DEV_LIVE passes the "->state != UBLK_S_DEV_DEAD" test that ublk_stop_dev_unlocked() uses as its proxy for "a disk is attached", while ->ub_disk is still NULL, so DEL_DEV right after ADD_DEV oopses in del_gendisk(). UBLK_S_DEV_QUIESCED plus UBLK_F_USER_RECOVERY dies one step earlier, in ublk_force_abort_dev(). A poisoned ->state also gets START_USER_RECOVERY and the char device read/write path onto a device that was never started, and wedges START_DEV at -EEXIST. A poisoned ->ublksrv_pid just makes GET_DEV_INFO report an unrelated task as the ublk server. Reset both after the memcpy(), as ublk_detach_disk() does. Userspace only ever reads these back, so correcting them silently breaks nothing. ADD_DEV has copied ->state in unsanitized since ublk was merged, but back then it was harmless: the gendisk was allocated during ADD_DEV, and both teardown and the START_DEV -EEXIST check keyed off disk_live() rather than ->state. The oops became reachable once the disk allocation moved to START_DEV and those checks switched to ->state. | ||||
| CVE-2026-74469 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: prevent peer transport count overflow sctp_assoc_add_peer() increments the association's 16-bit transport_count for every new unique peer. Adding the 65,536th transport wraps the count to zero. SCTP sock_diag uses transport_count to reserve the INET_DIAG_PEERS payload, then copies one sockaddr_storage for every entry in transport_addr_list. After the wrap, a diagnostic dump reserves an empty payload and writes 8 MiB of peer addresses past the skb tail. Reject a new unique peer when transport_count has reached U16_MAX. Perform the check after the existing-peer lookup so a duplicate address continues to return its existing transport at the limit. | ||||
| CVE-2026-74461 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx: Cancel hrtimer before clearing slave pointer In i2c_imx_unreg_slave(), the slave pointer is set to NULL after disabling interrupts. However, a pending interrupt might already have started the hrtimer (i2c_imx_slave_timeout) before the pointer was cleared. If the hrtimer fires after i2c_imx->slave is set to NULL, the timer callback i2c_imx_slave_finish_op() will call i2c_imx_slave_event() with a NULL slave pointer, which results in a use-after-free / NULL pointer dereference. Fix by canceling the hrtimer and waiting for it to complete after disabling interrupts, before clearing the slave pointer. | ||||
| CVE-2026-74460 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: ems_usb: validate CPC message lengths ems_usb_read_bulk_callback() walks CPC messages packed in one USB receive buffer. Check that each declared message fits in the URB payload. Also require the type-specific payload to cover the fields used by the CAN, state, error and overrun handlers. | ||||
| CVE-2026-74458 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents The wait and bulk receive paths walk variable-length commands from a USB buffer. A nonzero command shorter than CMD_HEADER_LEN can still be dispatched, and the wait path copies a matching command into a fixed caller-owned struct kvaser_cmd using the device-provided length. Reject nonzero commands that do not contain the fixed header or that extend beyond the current USB buffer item. In the wait path, also reject a matching command that exceeds the destination before copying it. | ||||
| CVE-2026-74455 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: validate uCAN receive record lengths pcan_usb_fd_decode_buf() walks uCAN records packed in one USB receive buffer. Require each record to contain the fixed header for its type, and verify CAN payload bytes before copying them into the skb. | ||||
| CVE-2026-74453 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Zero the tile state data array before each BIN job The binner BO is a single 16MB buffer split into 512KB slots that are handed out to jobs at submission time and recycled as jobs complete, without ever being cleared. Each slot holds the job's Tile State Data Array (TSDA) at its start, followed by the tile allocation pool. While the tile allocation pool is only walked by the render thread through branches the binner generated during the current job, the TSDA is the PTB's own per-tile bookkeeping and is consumed by the hardware itself. Although the kernel sets the "Auto-initialise Tile State Data Array" flag in the tile binning mode configuration, the PTB demonstrably still acts on stale tile state left by the slot's previous user: the binner ends up creating invalid command streams with invalid primitive streams and branches, which can cause GPU hangs as observed in [1][2]. Zero the TSDA when the job's binning slot is configured. This clears 48 bytes per tile (~24KB for a 1080p frame) in the submission path, and guarantees the PTB never sees another job's tile state. The tile count is only checked for being non-zero today, so the 8-bit fields it comes from can describe a tile state array almost six times larger than the slot it has to live in. Bound it before the slot is handed out, since such size decides how much of the slot is left for the tile alloc pool. | ||||
| CVE-2026-72392 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: fib6: fix NULL deref in fib6_walk_continue() on multi-batch dump inet6_dump_fib() saves its progress in cb->args[1] as a positional index within the current hash chain. Between batches, a concurrent fib6_new_table() can insert a new table at the chain head, shifting all existing entries. The saved index then lands on a different table, causing fib6_dump_table() to set w->root to the wrong table while w->node still points into the previous one. fib6_walk_continue() dereferences w->node->parent (NULL) and panics: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:fib6_walk_continue+0x6e/0x170 Call Trace: <TASK> fib6_dump_table.isra.0+0xc5/0x240 inet6_dump_fib+0xf6/0x420 rtnl_dumpit+0x30/0xa0 netlink_dump+0x15b/0x460 netlink_recvmsg+0x1d6/0x2a0 ____sys_recvmsg+0x17a/0x190 Fix by storing tb->tb6_id in cb->args[1] instead of a positional index. On resume, skip entries until the id matches; a concurrent head-insert can never match the saved id, so the walker always resumes on the correct table. | ||||
| CVE-2026-65675 | 1 Microsoft | 3 Github Copilot Chat, Visual Studio Code, Visual Studio Code Copilot Chat Extension | 2026-08-19 | 7.1 High |
| No cwe for this issue in Visual Studio Code CoPilot Chat Extension allows an unauthorized attacker to bypass a security feature over a network. | ||||
| CVE-2026-62671 | 2026-08-19 | 5.4 Medium | ||
| Grav Login Plugin adds login, basic ACL, and session wide messages to Grav. Prior to 3.8.11, the Grav Login plugin login.regenerate2FASecret task accepts a top-level GET request through the TaskServiceProvider task: URI parameter without requiring a login-form nonce, an Origin check, or a Referer check. Under the default SameSite=Lax session cookie policy, an off-site navigation can invoke taskRegenerate2FASecret() in a logged-in victim's session, overwrite the victim's TOTP secret, and force two-factor re-enrollment. This issue is fixed in version 3.8.11. | ||||
| CVE-2026-60731 | 1 Oracle | 1 Webcenter Portal | 2026-08-19 | 8.8 High |
| Vulnerability in the Oracle WebCenter Portal product of Oracle Fusion Middleware (component: Composer). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via RMI to compromise Oracle WebCenter Portal. Successful attacks of this vulnerability can result in takeover of Oracle WebCenter Portal. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-52872 | 1 Truelockmc | 1 Streambert | 2026-08-19 | 8.8 High |
| Streambert is a cross-platform Electron Desktop App to stream and download video content. Prior to 2.5.0, the downloadSubtitleFile utility in src/ipc/downloads.js, reached through the run-download IPC channel, accepts a renderer-supplied subtitle url using the file: URI scheme and passes its decoded pathname to fs.copyFileSync. The renderer also controls downloadPath, which determines the destination path. A compromised renderer can therefore copy any file readable by the StreamBERT process into an attacker-chosen writable location, exposing sensitive local data, and can overwrite existing writable files. This vulnerability is fixed in 2.5.0. | ||||
| CVE-2015-7601 | 1 Pcman | 1 Ftp Server | 2026-08-19 | N/A |
| Directory traversal vulnerability in PCMan's FTP Server 2.0.7 allows remote attackers to read arbitrary files via a ..// (dot dot double slash) in a RETR command. | ||||
| CVE-2021-4432 | 1 Pcman | 1 Ftp Server | 2026-08-19 | 5.3 Medium |
| A vulnerability was found in PCMan FTP Server 2.0.7. It has been classified as problematic. This affects an unknown part of the component USER Command Handler. The manipulation leads to denial of service. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-250719. | ||||
| CVE-2024-0731 | 1 Pcman | 1 Ftp Server | 2026-08-19 | 5.3 Medium |
| A vulnerability has been found in PCMan FTP Server 2.0.7 and classified as problematic. This vulnerability affects unknown code of the component PUT Command Handler. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-251554 is the identifier assigned to this vulnerability. | ||||
| CVE-2025-5331 | 1 Pcman | 1 Ftp Server | 2026-08-19 | 7.3 High |
| A vulnerability has been found in PCMan FTP Server 2.0.7 and classified as critical. This vulnerability affects unknown code of the component NLST Command Handler. The manipulation leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. | ||||