| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Author PHP Object Injection in ShortPixel Image Optimizer <= 6.4.3 versions. |
| Issue summary: When an application drives an AES-OCB context through the
public EVP_Cipher() one-shot interface, the application-supplied
initialisation vector (IV) is silently discarded.
Impact summary: Every message encrypted under the same key uses the
same effective nonce regardless of the IV supplied by the caller,
resulting in (key, nonce) reuse and loss of confidentiality. If the
same code path is used to compute the authentication tag, the tag
depends only on the (key, IV) pair and not on the plaintext or
ciphertext, allowing universal forgery of arbitrary ciphertext from a
single captured message.
OpenSSL provides two ways to drive a cipher: the documented streaming
interface (EVP_CipherUpdate / EVP_CipherFinal_ex) and a lower-level
one-shot, EVP_Cipher(), whose documentation explicitly recommends
against use by applications in favour of EVP_CipherUpdate() and
EVP_CipherFinal_ex(). The OCB provider's streaming handler flushes
the application-supplied IV into the OCB context before processing
data; the one-shot handler did not. Every call to EVP_Cipher() on an
AES-OCB context therefore ran with the all-zero key-derived offset
state left by cipher initialisation, regardless of the caller's IV.
If EVP_EncryptFinal_ex() is subsequently used to obtain the
authentication tag, the deferred IV setup runs at that point and
clears the running checksum that should have been accumulated over the
plaintext. The resulting tag is a function of (key, IV) only and
verifies against any ciphertext produced under the same (key, IV)
pair.
The OpenSSL SSL/TLS implementation is not affected: AES-OCB is not a
TLS cipher suite, and libssl does not call EVP_Cipher() in any case.
Applications that drive AES-OCB through the documented streaming AEAD
API (EVP_CipherUpdate / EVP_CipherFinal_ex) are not affected. Only
applications that combine the AES-OCB cipher with the EVP_Cipher()
one-shot API are vulnerable.
The FIPS modules in 4.0, 3.6, 3.5, 3.4 and 3.0 are not affected by
this issue, as AES-OCB is outside the OpenSSL FIPS module boundary. |
| OpenClaw before 2026.5.18 contains a command injection vulnerability where shell wrapper argv could change between approval and execution. Attackers can rebuild command arguments after allowlist approval to execute unapproved command shapes, potentially bypassing security controls. |
| Issue summary: A signed integer overflow when sizing the destination
buffer for Unicode output in ASN1_mbstring_ncopy() can lead to a heap
buffer overflow.
Impact summary: A heap buffer overflow may lead to a crash or possibly
attacker controlled code execution or other undefined behaviour.
In ASN1_mbstring_copy() and ASN1_mbstring_ncopy() the destination
size for Unicode output is computed in a signed int: by left shift
of the input character count for BMPSTRING (UTF-16) and
UNIVERSALSTRING (UTF-32), and by summing per-character byte counts
for UTF8STRING. The calculation overflows when the input reaches
around 2^30 characters. In the worst case (UNIVERSALSTRING at 2^30
characters) the size wraps to zero, OPENSSL_malloc(1) is called, and
the subsequent character copy writes several gigabytes past the
one-byte allocation.
X.509 certificate processing routes through ASN1_STRING_set_by_NID(),
whose DIRSTRING_TYPE mask excludes UNIVERSALSTRING and whose per-NID
size limits cap the input length; no network protocol or
certificate-handling path in OpenSSL exercises the overflow.
Triggering the bug requires an application that calls
ASN1_mbstring_copy() or ASN1_mbstring_ncopy() directly, or registers
a custom string type via ASN1_STRING_TABLE_add(), with
attacker-controlled input on the order of half a gigabyte or more.
For these reasons this issue was assigned Low severity.
The FIPS modules in 4.0, 3.6, 3.5, 3.4 and 3.0 are not affected by
this issue, as the affected code is outside the OpenSSL FIPS module
boundary. |
| Issue summary: When CMS password-based decryption (RFC 3211 / PWRI key unwrap)
processes attacker-supplied CMS data, an attacker-chosen stream-mode KEK
cipher can trigger a heap out-of-bounds read in kek_unwrap_key().
Impact summary: A heap buffer over-read may trigger a crash which leads to
Denial of Service for an application if the input buffer ends at a memory
page boundary and the following page is unmapped. There is no information
disclosure as the over-read bytes are not revealed to the attacker.
The key unwrapping function performs a check-byte test as specified in the
RFC that reads 7 bytes from a heap allocation that is based on the wrapped
key length from the message. There is a minimum length check based on the
block length of the wrapping cipher. However the cipher is selected from
an OID carried in the attacker's PWRI keyEncryptionAlgorithm with no
requirement that the cipher be a block cipher. When an attacker selects
a stream-mode cipher the guard will be ineffective and the allocated buffer
containing the unwrapped key can be too small to fit the check-bytes
specified in the RFC and a buffer over-read can happen.
Applications calling CMS_decrypt() or CMS_decrypt_set1_password()
(equivalently openssl cms -decrypt -pwri_password ...) on untrusted CMS
data are vulnerable to this issue. No password knowledge is required: the
over-read happens during the unwrap attempt before any authentication
succeeds.
The over-read is limited to a few bytes and is not written to output, so
there is no information disclosure. Triggering a crash requires the
allocation to border unmapped memory, which is unlikely with the normal
allocator.
The FIPS modules are not affected by this issue. |
| Unauthenticated Cross Site Scripting (XSS) in Paid Member Subscriptions <= 2.17.3 versions. |
| Contributor Privilege Escalation in B Blocks <= 2.0.31 versions. |
| Sales Representative Arbitrary File Deletion in Groundhogg <= 4.4 versions. |
| Unauthenticated Broken Access Control in Booking Package <= 1.7.06 versions. |
| Unauthenticated Broken Access Control in WPC Product Bundles for WooCommerce <= 8.5.3 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
The ALB RX path may access rx_hashtbl concurrently with bond
teardown. During rapid bond up/down cycles, rlb_deinitialize()
frees rx_hashtbl while RX handlers are still running, leading
to a null pointer dereference detected by KASAN.
However, the root cause is that rlb_arp_recv() can still be accessed
after setting recv_probe to NULL, which is actually a use-after-free
(UAF) issue. That is the reason for using the referenced commit in the
Fixes tag.
[ 214.174138] Oops: general protection fault, probably for non-canonical address 0xdffffc000000001d: 0000 [#1] SMP KASAN PTI
[ 214.186478] KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
[ 214.194933] CPU: 30 UID: 0 PID: 2375 Comm: ping Kdump: loaded Not tainted 6.19.0-rc8+ #2 PREEMPT(voluntary)
[ 214.205907] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.14.0 01/14/2022
[ 214.214357] RIP: 0010:rlb_arp_recv+0x505/0xab0 [bonding]
[ 214.220320] Code: 0f 85 2b 05 00 00 48 b8 00 00 00 00 00 fc ff df 40 0f b6 ed 48 c1 e5 06 49 03 ad 78 01 00 00 48 8d 7d 28 48 89 fa 48 c1 ea 03 <0f> b6
04 02 84 c0 74 06 0f 8e 12 05 00 00 80 7d 28 00 0f 84 8c 00
[ 214.241280] RSP: 0018:ffffc900073d8870 EFLAGS: 00010206
[ 214.247116] RAX: dffffc0000000000 RBX: ffff888168556822 RCX: ffff88816855681e
[ 214.255082] RDX: 000000000000001d RSI: dffffc0000000000 RDI: 00000000000000e8
[ 214.263048] RBP: 00000000000000c0 R08: 0000000000000002 R09: ffffed11192021c8
[ 214.271013] R10: ffff8888c9010e43 R11: 0000000000000001 R12: 1ffff92000e7b119
[ 214.278978] R13: ffff8888c9010e00 R14: ffff888168556822 R15: ffff888168556810
[ 214.286943] FS: 00007f85d2d9cb80(0000) GS:ffff88886ccb3000(0000) knlGS:0000000000000000
[ 214.295966] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 214.302380] CR2: 00007f0d047b5e34 CR3: 00000008a1c2e002 CR4: 00000000001726f0
[ 214.310347] Call Trace:
[ 214.313070] <IRQ>
[ 214.315318] ? __pfx_rlb_arp_recv+0x10/0x10 [bonding]
[ 214.320975] bond_handle_frame+0x166/0xb60 [bonding]
[ 214.326537] ? __pfx_bond_handle_frame+0x10/0x10 [bonding]
[ 214.332680] __netif_receive_skb_core.constprop.0+0x576/0x2710
[ 214.339199] ? __pfx_arp_process+0x10/0x10
[ 214.343775] ? sched_balance_find_src_group+0x98/0x630
[ 214.349513] ? __pfx___netif_receive_skb_core.constprop.0+0x10/0x10
[ 214.356513] ? arp_rcv+0x307/0x690
[ 214.360311] ? __pfx_arp_rcv+0x10/0x10
[ 214.364499] ? __lock_acquire+0x58c/0xbd0
[ 214.368975] __netif_receive_skb_one_core+0xae/0x1b0
[ 214.374518] ? __pfx___netif_receive_skb_one_core+0x10/0x10
[ 214.380743] ? lock_acquire+0x10b/0x140
[ 214.385026] process_backlog+0x3f1/0x13a0
[ 214.389502] ? process_backlog+0x3aa/0x13a0
[ 214.394174] __napi_poll.constprop.0+0x9f/0x370
[ 214.399233] net_rx_action+0x8c1/0xe60
[ 214.403423] ? __pfx_net_rx_action+0x10/0x10
[ 214.408193] ? lock_acquire.part.0+0xbd/0x260
[ 214.413058] ? sched_clock_cpu+0x6c/0x540
[ 214.417540] ? mark_held_locks+0x40/0x70
[ 214.421920] handle_softirqs+0x1fd/0x860
[ 214.426302] ? __pfx_handle_softirqs+0x10/0x10
[ 214.431264] ? __neigh_event_send+0x2d6/0xf50
[ 214.436131] do_softirq+0xb1/0xf0
[ 214.439830] </IRQ>
The issue is reproducible by repeatedly running
ip link set bond0 up/down while receiving ARP messages, where
rlb_arp_recv() can race with rlb_deinitialize() and dereference
a freed rx_hashtbl entry.
Fix this by setting recv_probe to NULL and then calling
synchronize_net() to wait for any concurrent RX processing to finish.
This ensures that no RX handler can access rx_hashtbl after it is freed
in bond_alb_deinitialize(). |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Stop job scheduling across aie2_release_resource()
Running jobs on a hardware context while it is in the process of
releasing resources can lead to use-after-free and crashes.
Fix this by stopping job scheduling before calling
aie2_release_resource() and restarting it after the release completes.
Additionally, aie2_sched_job_run() now checks whether the hardware
context is still active. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: ab8500: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Commit 1c1f13a006ed ("power: supply: ab8500: Move to componentized
binding") introduced this issue during a refactorization. Fix this racy
use-after-free by making sure the IRQ is requested _after_ the
registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-llbitmap: fix percpu_ref not resurrected on suspend timeout
When llbitmap_suspend_timeout() times out waiting for percpu_ref to
become zero, it returns -ETIMEDOUT without resurrecting the percpu_ref.
The caller (md_llbitmap_daemon_fn) then continues to the next page
without calling llbitmap_resume(), leaving the percpu_ref in a killed
state permanently.
Fix this by resurrecting the percpu_ref before returning the error,
ensuring the page control structure remains usable for subsequent
operations. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
vidi_connection_ioctl() retrieves the driver_data from drm_dev->dev to
obtain a struct vidi_context pointer. However, drm_dev->dev is the
exynos-drm master device, and the driver_data contained therein is not
the vidi component device, but a completely different device.
This can lead to various bugs, ranging from null pointer dereferences and
garbage value accesses to, in unlucky cases, out-of-bounds errors,
use-after-free errors, and more.
To resolve this issue, we need to store/delete the vidi device pointer in
exynos_drm_private->vidi_dev during bind/unbind, and then read this
exynos_drm_private->vidi_dev within ioctl() to obtain the correct
struct vidi_context pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
rcu: Fix rcu_read_unlock() deadloop due to softirq
Commit 5f5fa7ea89dc ("rcu: Don't use negative nesting depth in
__rcu_read_unlock()") removes the recursion-protection code from
__rcu_read_unlock(). Therefore, we could invoke the deadloop in
raise_softirq_irqoff() with ftrace enabled as follows:
WARNING: CPU: 0 PID: 0 at kernel/trace/trace.c:3021 __ftrace_trace_stack.constprop.0+0x172/0x180
Modules linked in: my_irq_work(O)
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.18.0-rc7-dirty #23 PREEMPT(full)
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:__ftrace_trace_stack.constprop.0+0x172/0x180
RSP: 0018:ffffc900000034a8 EFLAGS: 00010002
RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000000
RDX: 0000000000000003 RSI: ffffffff826d7b87 RDI: ffffffff826e9329
RBP: 0000000000090009 R08: 0000000000000005 R09: ffffffff82afbc4c
R10: 0000000000000008 R11: 0000000000011d7a R12: 0000000000000000
R13: ffff888003874100 R14: 0000000000000003 R15: ffff8880038c1054
FS: 0000000000000000(0000) GS:ffff8880fa8ea000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b31fa7f540 CR3: 00000000078f4005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<IRQ>
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
unwind_next_frame+0x203/0x9b0
__unwind_start+0x15d/0x1c0
arch_stack_walk+0x62/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
unwind_next_frame+0x203/0x9b0
__unwind_start+0x15d/0x1c0
arch_stack_walk+0x62/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
unwind_next_frame+0x203/0x9b0
__unwind_start+0x15d/0x1c0
arch_stack_walk+0x62/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
raise_softirq_irqoff+0x6e/0xa0
rcu_read_unlock_special+0xb1/0x160
__is_insn_slot_addr+0x54/0x70
kernel_text_address+0x48/0xc0
__kernel_text_address+0xd/0x40
unwind_get_return_address+0x1e/0x40
arch_stack_walk+0x9c/0xf0
stack_trace_save+0x48/0x70
__ftrace_trace_stack.constprop.0+0x144/0x180
trace_buffer_unlock_commit_regs+0x6d/0x220
trace_event_buffer_commit+0x5c/0x260
trace_event_raw_event_softirq+0x47/0x80
__raise_softirq_irqoff+0x61/0x80
__flush_smp_call_function_queue+0x115/0x420
__sysvec_call_function_single+0x17/0xb0
sysvec_call_function_single+0x8c/0xc0
</IRQ>
Commit b41642c87716 ("rcu: Fix rcu_read_unlock() deadloop due to IRQ work")
fixed the infinite loop in rcu_read_unlock_special() for IRQ work by
setting a flag before calling irq_work_queue_on(). We fix this issue by
setting the same flag before calling raise_softirq_irqoff() and rename the
flag to defer_qs_pending for more common. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix a crash due to incorrect cleanup usage of kfree
Annotating a local pointer variable, which will be assigned with the
kmalloc-family functions, with the `__cleanup(kfree)` attribute will
make the address of the local variable, rather than the address returned
by kmalloc, passed to kfree directly and lead to a crash due to invalid
deallocation of stack address. According to other places in the repo,
the correct usage should be `__free(kfree)`. The code coincidentally
compiled because the parameter type `void *` of kfree is compatible with
the desired type `struct { ... } **`. |
| Subscriber SQL Injection in GamiPress <= 7.8.7 versions. |
| OpenClaw before 2026.5.18 contains a policy enforcement vulnerability in system.run safe-bin allowlist validation that allows shell expansion to modify command interpretation on POSIX nodes. Authenticated operators can exploit shell metacharacters in approved commands to read unintended node-local files and expose sensitive configuration data. |
| OpenClaw before 2026.4.29 contains an authorization bypass vulnerability in the QQBot streaming command that allows authenticated senders to mutate configuration without explicit allowFrom restrictions. Attackers can modify QQBot streaming configuration outside intended admin policy by reaching the affected command without non-wildcard allowlist entry requirements. |
