| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr
[Why]
There is a potential memory access violation while
iterating through array of dcn35 clks.
[How]
Limit iteration per array size. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix hang in nilfs_lookup_dirty_data_buffers()
Syzbot reported a hang issue in migrate_pages_batch() called by mbind()
and nilfs_lookup_dirty_data_buffers() called in the log writer of nilfs2.
While migrate_pages_batch() locks a folio and waits for the writeback to
complete, the log writer thread that should bring the writeback to
completion picks up the folio being written back in
nilfs_lookup_dirty_data_buffers() that it calls for subsequent log
creation and was trying to lock the folio. Thus causing a deadlock.
In the first place, it is unexpected that folios/pages in the middle of
writeback will be updated and become dirty. Nilfs2 adds a checksum to
verify the validity of the log being written and uses it for recovery at
mount, so data changes during writeback are suppressed. Since this is
broken, an unclean shutdown could potentially cause recovery to fail.
Investigation revealed that the root cause is that the wait for writeback
completion in nilfs_page_mkwrite() is conditional, and if the backing
device does not require stable writes, data may be modified without
waiting.
Fix these issues by making nilfs_page_mkwrite() wait for writeback to
finish regardless of the stable write requirement of the backing device. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_limit: reject configurations that cause integer overflow
Reject bogus configs where internal token counter wraps around.
This only occurs with very very large requests, such as 17gbyte/s.
Its better to reject this rather than having incorrect ratelimit. |
| In the Linux kernel, the following vulnerability has been resolved:
tunnels: fix out of bounds access when building IPv6 PMTU error
If the ICMPv6 error is built from a non-linear skb we get the following
splat,
BUG: KASAN: slab-out-of-bounds in do_csum+0x220/0x240
Read of size 4 at addr ffff88811d402c80 by task netperf/820
CPU: 0 PID: 820 Comm: netperf Not tainted 6.8.0-rc1+ #543
...
kasan_report+0xd8/0x110
do_csum+0x220/0x240
csum_partial+0xc/0x20
skb_tunnel_check_pmtu+0xeb9/0x3280
vxlan_xmit_one+0x14c2/0x4080
vxlan_xmit+0xf61/0x5c00
dev_hard_start_xmit+0xfb/0x510
__dev_queue_xmit+0x7cd/0x32a0
br_dev_queue_push_xmit+0x39d/0x6a0
Use skb_checksum instead of csum_partial who cannot deal with non-linear
SKBs. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Implement bounds check for stream encoder creation in DCN301
'stream_enc_regs' array is an array of dcn10_stream_enc_registers
structures. The array is initialized with four elements, corresponding
to the four calls to stream_enc_regs() in the array initializer. This
means that valid indices for this array are 0, 1, 2, and 3.
The error message 'stream_enc_regs' 4 <= 5 below, is indicating that
there is an attempt to access this array with an index of 5, which is
out of bounds. This could lead to undefined behavior
Here, eng_id is used as an index to access the stream_enc_regs array. If
eng_id is 5, this would result in an out-of-bounds access on the
stream_enc_regs array.
Thus fixing Buffer overflow error in dcn301_stream_encoder_create
reported by Smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn301/dcn301_resource.c:1011 dcn301_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix global oob in ksmbd_nl_policy
Similar to a reported issue (check the commit b33fb5b801c6 ("net:
qualcomm: rmnet: fix global oob in rmnet_policy"), my local fuzzer finds
another global out-of-bounds read for policy ksmbd_nl_policy. See bug
trace below:
==================================================================
BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline]
BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600
Read of size 1 at addr ffffffff8f24b100 by task syz-executor.1/62810
CPU: 0 PID: 62810 Comm: syz-executor.1 Tainted: G N 6.1.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x172/0x475 mm/kasan/report.c:395
kasan_report+0xbb/0x1c0 mm/kasan/report.c:495
validate_nla lib/nlattr.c:386 [inline]
__nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600
__nla_parse+0x3e/0x50 lib/nlattr.c:697
__nlmsg_parse include/net/netlink.h:748 [inline]
genl_family_rcv_msg_attrs_parse.constprop.0+0x1b0/0x290 net/netlink/genetlink.c:565
genl_family_rcv_msg_doit+0xda/0x330 net/netlink/genetlink.c:734
genl_family_rcv_msg net/netlink/genetlink.c:833 [inline]
genl_rcv_msg+0x441/0x780 net/netlink/genetlink.c:850
netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540
genl_rcv+0x24/0x40 net/netlink/genetlink.c:861
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0x154/0x190 net/socket.c:734
____sys_sendmsg+0x6df/0x840 net/socket.c:2482
___sys_sendmsg+0x110/0x1b0 net/socket.c:2536
__sys_sendmsg+0xf3/0x1c0 net/socket.c:2565
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fdd66a8f359
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fdd65e00168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fdd66bbcf80 RCX: 00007fdd66a8f359
RDX: 0000000000000000 RSI: 0000000020000500 RDI: 0000000000000003
RBP: 00007fdd66ada493 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffc84b81aff R14: 00007fdd65e00300 R15: 0000000000022000
</TASK>
The buggy address belongs to the variable:
ksmbd_nl_policy+0x100/0xa80
The buggy address belongs to the physical page:
page:0000000034f47940 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1ccc4b
flags: 0x200000000001000(reserved|node=0|zone=2)
raw: 0200000000001000 ffffea00073312c8 ffffea00073312c8 0000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffffff8f24b000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffff8f24b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffffff8f24b100: f9 f9 f9 f9 00 00 f9 f9 f9 f9 f9 f9 00 00 07 f9
^
ffffffff8f24b180: f9 f9 f9 f9 00 05 f9 f9 f9 f9 f9 f9 00 00 00 05
ffffffff8f24b200: f9 f9 f9 f9 00 00 03 f9 f9 f9 f9 f9 00 00 04 f9
==================================================================
To fix it, add a placeholder named __KSMBD_EVENT_MAX and let
KSMBD_EVENT_MAX to be its original value - 1 according to what other
netlink families do. Also change two sites that refer the
KSMBD_EVENT_MAX to correct value. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: regenerate buddy after block freeing failed if under fc replay
This mostly reverts commit 6bd97bf273bd ("ext4: remove redundant
mb_regenerate_buddy()") and reintroduces mb_regenerate_buddy(). Based on
code in mb_free_blocks(), fast commit replay can end up marking as free
blocks that are already marked as such. This causes corruption of the
buddy bitmap so we need to regenerate it in that case. |
| In the Linux kernel, the following vulnerability has been resolved:
pwm: Fix out-of-bounds access in of_pwm_single_xlate()
With args->args_count == 2 args->args[2] is not defined. Actually the
flags are contained in args->args[1]. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qualcomm: rmnet: fix global oob in rmnet_policy
The variable rmnet_link_ops assign a *bigger* maxtype which leads to a
global out-of-bounds read when parsing the netlink attributes. See bug
trace below:
==================================================================
BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline]
BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600
Read of size 1 at addr ffffffff92c438d0 by task syz-executor.6/84207
CPU: 0 PID: 84207 Comm: syz-executor.6 Tainted: G N 6.1.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x172/0x475 mm/kasan/report.c:395
kasan_report+0xbb/0x1c0 mm/kasan/report.c:495
validate_nla lib/nlattr.c:386 [inline]
__nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600
__nla_parse+0x3e/0x50 lib/nlattr.c:697
nla_parse_nested_deprecated include/net/netlink.h:1248 [inline]
__rtnl_newlink+0x50a/0x1880 net/core/rtnetlink.c:3485
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3594
rtnetlink_rcv_msg+0x43c/0xd70 net/core/rtnetlink.c:6091
netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0x154/0x190 net/socket.c:734
____sys_sendmsg+0x6df/0x840 net/socket.c:2482
___sys_sendmsg+0x110/0x1b0 net/socket.c:2536
__sys_sendmsg+0xf3/0x1c0 net/socket.c:2565
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fdcf2072359
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fdcf13e3168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fdcf219ff80 RCX: 00007fdcf2072359
RDX: 0000000000000000 RSI: 0000000020000200 RDI: 0000000000000003
RBP: 00007fdcf20bd493 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fffbb8d7bdf R14: 00007fdcf13e3300 R15: 0000000000022000
</TASK>
The buggy address belongs to the variable:
rmnet_policy+0x30/0xe0
The buggy address belongs to the physical page:
page:0000000065bdeb3c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x155243
flags: 0x200000000001000(reserved|node=0|zone=2)
raw: 0200000000001000 ffffea00055490c8 ffffea00055490c8 0000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffffff92c43780: f9 f9 f9 f9 00 00 00 02 f9 f9 f9 f9 00 00 00 07
ffffffff92c43800: f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 06 f9 f9 f9
>ffffffff92c43880: f9 f9 f9 f9 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9
^
ffffffff92c43900: 00 00 00 00 00 00 00 00 07 f9 f9 f9 f9 f9 f9 f9
ffffffff92c43980: 00 00 00 07 f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9
According to the comment of `nla_parse_nested_deprecated`, the maxtype
should be len(destination array) - 1. Hence use `IFLA_RMNET_MAX` here. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate mech token in session setup
If client send invalid mech token in session setup request, ksmbd
validate and make the error if it is invalid. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject variable offset alu on PTR_TO_FLOW_KEYS
For PTR_TO_FLOW_KEYS, check_flow_keys_access() only uses fixed off
for validation. However, variable offset ptr alu is not prohibited
for this ptr kind. So the variable offset is not checked.
The following prog is accepted:
func#0 @0
0: R1=ctx() R10=fp0
0: (bf) r6 = r1 ; R1=ctx() R6_w=ctx()
1: (79) r7 = *(u64 *)(r6 +144) ; R6_w=ctx() R7_w=flow_keys()
2: (b7) r8 = 1024 ; R8_w=1024
3: (37) r8 /= 1 ; R8_w=scalar()
4: (57) r8 &= 1024 ; R8_w=scalar(smin=smin32=0,
smax=umax=smax32=umax32=1024,var_off=(0x0; 0x400))
5: (0f) r7 += r8
mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r8 stack= before 4: (57) r8 &= 1024
mark_precise: frame0: regs=r8 stack= before 3: (37) r8 /= 1
mark_precise: frame0: regs=r8 stack= before 2: (b7) r8 = 1024
6: R7_w=flow_keys(smin=smin32=0,smax=umax=smax32=umax32=1024,var_off
=(0x0; 0x400)) R8_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1024,
var_off=(0x0; 0x400))
6: (79) r0 = *(u64 *)(r7 +0) ; R0_w=scalar()
7: (95) exit
This prog loads flow_keys to r7, and adds the variable offset r8
to r7, and finally causes out-of-bounds access:
BUG: unable to handle page fault for address: ffffc90014c80038
[...]
Call Trace:
<TASK>
bpf_dispatcher_nop_func include/linux/bpf.h:1231 [inline]
__bpf_prog_run include/linux/filter.h:651 [inline]
bpf_prog_run include/linux/filter.h:658 [inline]
bpf_prog_run_pin_on_cpu include/linux/filter.h:675 [inline]
bpf_flow_dissect+0x15f/0x350 net/core/flow_dissector.c:991
bpf_prog_test_run_flow_dissector+0x39d/0x620 net/bpf/test_run.c:1359
bpf_prog_test_run kernel/bpf/syscall.c:4107 [inline]
__sys_bpf+0xf8f/0x4560 kernel/bpf/syscall.c:5475
__do_sys_bpf kernel/bpf/syscall.c:5561 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5559 [inline]
__x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5559
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Fix this by rejecting ptr alu with variable offset on flow_keys.
Applying the patch rejects the program with "R7 pointer arithmetic
on flow_keys prohibited". |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Prevent out-of-bounds memory access
The test_tag test triggers an unhandled page fault:
# ./test_tag
[ 130.640218] CPU 0 Unable to handle kernel paging request at virtual address ffff80001b898004, era == 9000000003137f7c, ra == 9000000003139e70
[ 130.640501] Oops[#3]:
[ 130.640553] CPU: 0 PID: 1326 Comm: test_tag Tainted: G D O 6.7.0-rc4-loong-devel-gb62ab1a397cf #47 61985c1d94084daa2432f771daa45b56b10d8d2a
[ 130.640764] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
[ 130.640874] pc 9000000003137f7c ra 9000000003139e70 tp 9000000104cb4000 sp 9000000104cb7a40
[ 130.641001] a0 ffff80001b894000 a1 ffff80001b897ff8 a2 000000006ba210be a3 0000000000000000
[ 130.641128] a4 000000006ba210be a5 00000000000000f1 a6 00000000000000b3 a7 0000000000000000
[ 130.641256] t0 0000000000000000 t1 00000000000007f6 t2 0000000000000000 t3 9000000004091b70
[ 130.641387] t4 000000006ba210be t5 0000000000000004 t6 fffffffffffffff0 t7 90000000040913e0
[ 130.641512] t8 0000000000000005 u0 0000000000000dc0 s9 0000000000000009 s0 9000000104cb7ae0
[ 130.641641] s1 00000000000007f6 s2 0000000000000009 s3 0000000000000095 s4 0000000000000000
[ 130.641771] s5 ffff80001b894000 s6 ffff80001b897fb0 s7 9000000004090c50 s8 0000000000000000
[ 130.641900] ra: 9000000003139e70 build_body+0x1fcc/0x4988
[ 130.642007] ERA: 9000000003137f7c build_body+0xd8/0x4988
[ 130.642112] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[ 130.642261] PRMD: 00000004 (PPLV0 +PIE -PWE)
[ 130.642353] EUEN: 00000003 (+FPE +SXE -ASXE -BTE)
[ 130.642458] ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
[ 130.642554] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
[ 130.642658] BADV: ffff80001b898004
[ 130.642719] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
[ 130.642815] Modules linked in: [last unloaded: bpf_testmod(O)]
[ 130.642924] Process test_tag (pid: 1326, threadinfo=00000000f7f4015f, task=000000006499f9fd)
[ 130.643062] Stack : 0000000000000000 9000000003380724 0000000000000000 0000000104cb7be8
[ 130.643213] 0000000000000000 25af8d9b6e600558 9000000106250ea0 9000000104cb7ae0
[ 130.643378] 0000000000000000 0000000000000000 9000000104cb7be8 90000000049f6000
[ 130.643538] 0000000000000090 9000000106250ea0 ffff80001b894000 ffff80001b894000
[ 130.643685] 00007ffffb917790 900000000313ca94 0000000000000000 0000000000000000
[ 130.643831] ffff80001b894000 0000000000000ff7 0000000000000000 9000000100468000
[ 130.643983] 0000000000000000 0000000000000000 0000000000000040 25af8d9b6e600558
[ 130.644131] 0000000000000bb7 ffff80001b894048 0000000000000000 0000000000000000
[ 130.644276] 9000000104cb7be8 90000000049f6000 0000000000000090 9000000104cb7bdc
[ 130.644423] ffff80001b894000 0000000000000000 00007ffffb917790 90000000032acfb0
[ 130.644572] ...
[ 130.644629] Call Trace:
[ 130.644641] [<9000000003137f7c>] build_body+0xd8/0x4988
[ 130.644785] [<900000000313ca94>] bpf_int_jit_compile+0x228/0x4ec
[ 130.644891] [<90000000032acfb0>] bpf_prog_select_runtime+0x158/0x1b0
[ 130.645003] [<90000000032b3504>] bpf_prog_load+0x760/0xb44
[ 130.645089] [<90000000032b6744>] __sys_bpf+0xbb8/0x2588
[ 130.645175] [<90000000032b8388>] sys_bpf+0x20/0x2c
[ 130.645259] [<9000000003f6ab38>] do_syscall+0x7c/0x94
[ 130.645369] [<9000000003121c5c>] handle_syscall+0xbc/0x158
[ 130.645507]
[ 130.645539] Code: 380839f6 380831f9 28412bae <24000ca6> 004081ad 0014cb50 004083e8 02bff34c 58008e91
[ 130.645729]
[ 130.646418] ---[ end trace 0000000000000000 ]---
On my machine, which has CONFIG_PAGE_SIZE_16KB=y, the test failed at
loading a BPF prog with 2039 instructions:
prog = (struct bpf_prog *)ffff80001b894000
insn = (struct bpf_insn *)(prog->insnsi)fff
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw
KASAN report out-of-bounds read as follows:
BUG: KASAN: global-out-of-bounds in afe4404_read_raw+0x2ce/0x380
Read of size 4 at addr ffffffffc00e4658 by task cat/278
Call Trace:
afe4404_read_raw
iio_read_channel_info
dev_attr_show
The buggy address belongs to the variable:
afe4404_channel_leds+0x18/0xffffffffffffe9c0
This issue can be reproduce by singe command:
$ cat /sys/bus/i2c/devices/0-0058/iio\:device0/in_intensity6_raw
The array size of afe4404_channel_leds and afe4404_channel_offdacs
are less than channels, so access with chan->address cause OOB read
in afe4404_[read|write]_raw. Fix it by moving access before use them. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: health: afe4403: Fix oob read in afe4403_read_raw
KASAN report out-of-bounds read as follows:
BUG: KASAN: global-out-of-bounds in afe4403_read_raw+0x42e/0x4c0
Read of size 4 at addr ffffffffc02ac638 by task cat/279
Call Trace:
afe4403_read_raw
iio_read_channel_info
dev_attr_show
The buggy address belongs to the variable:
afe4403_channel_leds+0x18/0xffffffffffffe9e0
This issue can be reproduced by singe command:
$ cat /sys/bus/spi/devices/spi0.0/iio\:device0/in_intensity6_raw
The array size of afe4403_channel_leds is less than channels, so access
with chan->address cause OOB read in afe4403_read_raw. Fix it by moving
access before use it. |
| In the Linux kernel, the following vulnerability has been resolved:
libbpf: Handle size overflow for ringbuf mmap
The maximum size of ringbuf is 2GB on x86-64 host, so 2 * max_entries
will overflow u32 when mapping producer page and data pages. Only
casting max_entries to size_t is not enough, because for 32-bits
application on 64-bits kernel the size of read-only mmap region
also could overflow size_t.
So fixing it by casting the size of read-only mmap region into a __u64
and checking whether or not there will be overflow during mmap. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: fix buffer overflow in elem comparison
For vendor elements, the code here assumes that 5 octets
are present without checking. Since the element itself is
already checked to fit, we only need to check the length. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac8021: fix possible oob access in ieee80211_get_rate_duration
Fix possible out-of-bound access in ieee80211_get_rate_duration routine
as reported by the following UBSAN report:
UBSAN: array-index-out-of-bounds in net/mac80211/airtime.c:455:47
index 15 is out of range for type 'u16 [12]'
CPU: 2 PID: 217 Comm: kworker/u32:10 Not tainted 6.1.0-060100rc3-generic
Hardware name: Acer Aspire TC-281/Aspire TC-281, BIOS R01-A2 07/18/2017
Workqueue: mt76 mt76u_tx_status_data [mt76_usb]
Call Trace:
<TASK>
show_stack+0x4e/0x61
dump_stack_lvl+0x4a/0x6f
dump_stack+0x10/0x18
ubsan_epilogue+0x9/0x43
__ubsan_handle_out_of_bounds.cold+0x42/0x47
ieee80211_get_rate_duration.constprop.0+0x22f/0x2a0 [mac80211]
? ieee80211_tx_status_ext+0x32e/0x640 [mac80211]
ieee80211_calc_rx_airtime+0xda/0x120 [mac80211]
ieee80211_calc_tx_airtime+0xb4/0x100 [mac80211]
mt76x02_send_tx_status+0x266/0x480 [mt76x02_lib]
mt76x02_tx_status_data+0x52/0x80 [mt76x02_lib]
mt76u_tx_status_data+0x67/0xd0 [mt76_usb]
process_one_work+0x225/0x400
worker_thread+0x50/0x3e0
? process_one_work+0x400/0x400
kthread+0xe9/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: Handle attempt to delete multipath route when fib_info contains an nh reference
Gwangun Jung reported a slab-out-of-bounds access in fib_nh_match:
fib_nh_match+0xf98/0x1130 linux-6.0-rc7/net/ipv4/fib_semantics.c:961
fib_table_delete+0x5f3/0xa40 linux-6.0-rc7/net/ipv4/fib_trie.c:1753
inet_rtm_delroute+0x2b3/0x380 linux-6.0-rc7/net/ipv4/fib_frontend.c:874
Separate nexthop objects are mutually exclusive with the legacy
multipath spec. Fix fib_nh_match to return if the config for the
to be deleted route contains a multipath spec while the fib_info
is using a nexthop object. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-dv-timings.c: fix too strict blanking sanity checks
Sanity checks were added to verify the v4l2_bt_timings blanking fields
in order to avoid integer overflows when userspace passes weird values.
But that assumed that userspace would correctly fill in the front porch,
backporch and sync values, but sometimes all you know is the total
blanking, which is then assigned to just one of these fields.
And that can fail with these checks.
So instead set a maximum for the total horizontal and vertical
blanking and check that each field remains below that.
That is still sufficient to avoid integer overflows, but it also
allows for more flexibility in how userspace fills in these fields. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: fix shift-out-of-bounds in hid_report_raw_event
Syzbot reported shift-out-of-bounds in hid_report_raw_event.
microsoft 0003:045E:07DA.0001: hid_field_extract() called with n (128) >
32! (swapper/0)
======================================================================
UBSAN: shift-out-of-bounds in drivers/hid/hid-core.c:1323:20
shift exponent 127 is too large for 32-bit type 'int'
CPU: 0 PID: 0 Comm: swapper/0 Not tainted
6.1.0-rc4-syzkaller-00159-g4bbf3422df78 #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS
Google 10/26/2022
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e3/0x2cb lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:151 [inline]
__ubsan_handle_shift_out_of_bounds+0x3a6/0x420 lib/ubsan.c:322
snto32 drivers/hid/hid-core.c:1323 [inline]
hid_input_fetch_field drivers/hid/hid-core.c:1572 [inline]
hid_process_report drivers/hid/hid-core.c:1665 [inline]
hid_report_raw_event+0xd56/0x18b0 drivers/hid/hid-core.c:1998
hid_input_report+0x408/0x4f0 drivers/hid/hid-core.c:2066
hid_irq_in+0x459/0x690 drivers/hid/usbhid/hid-core.c:284
__usb_hcd_giveback_urb+0x369/0x530 drivers/usb/core/hcd.c:1671
dummy_timer+0x86b/0x3110 drivers/usb/gadget/udc/dummy_hcd.c:1988
call_timer_fn+0xf5/0x210 kernel/time/timer.c:1474
expire_timers kernel/time/timer.c:1519 [inline]
__run_timers+0x76a/0x980 kernel/time/timer.c:1790
run_timer_softirq+0x63/0xf0 kernel/time/timer.c:1803
__do_softirq+0x277/0x75b kernel/softirq.c:571
__irq_exit_rcu+0xec/0x170 kernel/softirq.c:650
irq_exit_rcu+0x5/0x20 kernel/softirq.c:662
sysvec_apic_timer_interrupt+0x91/0xb0 arch/x86/kernel/apic/apic.c:1107
======================================================================
If the size of the integer (unsigned n) is bigger than 32 in snto32(),
shift exponent will be too large for 32-bit type 'int', resulting in a
shift-out-of-bounds bug.
Fix this by adding a check on the size of the integer (unsigned n) in
snto32(). To add support for n greater than 32 bits, set n to 32, if n
is greater than 32. |
