Export limit exceeded: 398242 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (398242 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93216 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/page_owner: use memcg_data snapshot to avoid TOCTOU in print_page_owner_memcg() print_page_owner_memcg() reads page->memcg_data via READ_ONCE() at the start to guard against tail pages and NULL data. However, it later re-reads page->memcg_data locklessly in two places: 1: page_memcg_check(page) 2: PageMemcgKmem(page) (via folio_memcg_kmem(), which includes VM_BUG_ON assertions for tail pages and MEMCG_DATA_OBJEXTS) If the page is concurrently freed and reallocated as a THP tail page or slab page between these calls, the VM_BUG_ON assertions can trigger on CONFIG_DEBUG_VM=y builds, crashing the kernel. Fix both TOCTOU issues by using the memcg_data snapshot throughout. | ||||
| CVE-2026-93215 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cdx: Fix double free when sysfs file creation fails In cdx_create_res_attr(), if sysfs_create_bin_file() fails, the code frees res_attr but doesn't set cdx_dev->res_attr[num] to NULL. This leaves a dangling pointer in the array. Then cdx_destroy_res_attr() frees the already-freed memory. Fix the double free by initializing cdx_dev->res_attr[num] after sysfs_create_bin_file() completes. | ||||
| CVE-2026-63633 | 1 Freerdp | 1 Freerdp | 2026-09-24 | 9.8 Critical |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.28.0, freerdp_dsp_decode_opus in libfreerdp/codec/dsp.c calls Stream_EnsureRemainingCapacity on context->common.buffer even though opus_decode writes decoded PCM into the caller-supplied out stream. A malicious RDP server that negotiates WAVE_FORMAT_OPUS with a client built with WITH_OPUS enabled and WITH_DSP_FFMPEG disabled can make libopus write a large decoded frame beyond the 4096-byte StreamPool_Take destination used by channels/rdpsnd/client/rdpsnd_main.c. This can corrupt the client heap, crash the client, and may permit code execution. This issue is fixed in version 3.28.0. | ||||
| CVE-2026-93213 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: of: fix out-of-bounds read in of_alias_scan() stem parser The stem parser tests isdigit(*(end - 1)) before checking end > start and so reads one byte before the property name when the name is empty or all digits. Check the bound first. | ||||
| CVE-2026-93210 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: harden DFS cache against invalid target hints Currently, get_tgt_name() returns ERR_PTR(-ENOENT) when ce->tgthint is NULL, and dfs_cache_noreq_update_tgthint() assumes ce->tgthint is always valid. In preparation for clearing ce->tgthint in free_tgts(), harden callers of get_tgt_name() against ERR_PTR results and harden dfs_cache_noreq_update_tgthint() against NULL pointer dereferences. | ||||
| CVE-2026-93209 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: use skb_get() instead of skb_clone() for req_skb BT enable fails intermittently with -ETIMEDOUT (-110). The kernel log shows the HCI Read Local Version command was sent and the firmware replied with status 0x00 (logged by hci_req_cmd_complete() BT_DBG), but the waiter in __hci_cmd_sync_sk() never woke up and timed out after 10 s: bluetooth hci0: Opcode 0xfc00 // __hci_cmd_sync_sk bluetooth hci0: opcode 0xfc00 plen 1 // hci_cmd_sync_add bluetooth hci0: skb len 4 // hci_cmd_sync_alloc bluetooth hci0: length 1 // hci_req_sync_run Bluetooth: hci0 cmd_cnt 1 cmd queued 1 // hci_cmd_work Bluetooth: hci0 type 1 len 4 // hci_send_frame Bluetooth: opcode 0xfc00 status 0x00 // hci_req_cmd_complete <-- req_skb NULL: req_complete_skb not set, hci_cmd_sync_complete() never called, req_status stays HCI_REQ_PEND --> <-- 10 s later: wait_event_interruptible_timeout expires --> bluetooth hci0: end: err -110 // __hci_cmd_sync_sk The root cause is that hci_send_cmd_sync() clones the sent command into hdev->req_skb so that hci_req_cmd_complete() can locate the registered completion callback. Under memory pressure this skb_clone() fails, leaving hdev->req_skb NULL. The firmware reply is received and processed, but hci_req_cmd_complete() finds NULL req_skb, so hci_cmd_sync_complete() is never called, req_status stays HCI_REQ_PEND, and the waiter times out with -ETIMEDOUT. req_skb is only used to read bt_cb(skb)->hci callbacks and opcode -- it is never modified. Replace skb_clone() with skb_get(), which simply increments the reference count of hdev->sent_cmd without allocating new memory and therefore cannot fail. This issue was first observed as a use-after-free in ttyport_close() when ttyport_open() failed, which was investigated in an earlier patch series [1]. That investigation led to the discovery of the true root cause described above. [1] https://lore.kernel.org/all/20250430111617.1151390-1-quic_cxin@quicinc.com/ | ||||
| CVE-2026-93208 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: kasan: fix cache shrink race with CPU hotplug kasan_quarantine_remove_cache() first invokes per_cpu_remove_cache() on all online CPUs. Each callback moves objects belonging to the cache from cpu_quarantine to the CPU's shrink_qlist, where they can later be freed from task context. kmem_cache_destroy() invokes the quarantine removal path while holding cpus_read_lock(), but kmem_cache_shrink() does not. The latter can therefore race with CPU offlining as follows: kmem_cache_shrink() CPU hotplug ------------------- ----------- on_each_cpu() CPU1 moves objects to CPU1's shrink_qlist on_each_cpu() returns CPU1 goes offline kasan_cpu_offline() drains cpu_quarantine leaves shrink_qlist untouched for_each_online_cpu() skips CPU1 The objects left on CPU1's shrink_qlist are not returned to the slab allocator. This may prevent kmem_cache_shrink() from releasing slabs that would otherwise become empty. If CPU1 remains offline, a later kmem_cache_destroy() also skips the list and can report that the cache still contains objects. An intermittent occurrence was observed with a virtio-9p filesystem. The mount and umount commands both returned 0, but the kernel logged the following during the userspace-triggered teardown: [ 2994.380134][ T111] BUG 9p-fcall-cache-1 (Tainted: G B ): Objects remaining on __kmem_cache_shutdown() [ 2994.381140][ T111] Object 0xff11000004361118 @offset=4376 [ 2994.381607][ T111] Allocated in p9_fcall_init+0x201/0x400 age=19564 cpu=1 pid=104 [ 2994.382591][ T111] p9_fcall_init+0x201/0x400 [ 2994.382810][ T111] p9_tag_alloc+0x12f/0x700 [ 2994.382982][ T111] p9_client_prepare_req+0x102/0x3e0 [ 2994.383165][ T111] p9_client_rpc+0x1ab/0xa50 [ 2994.383334][ T111] p9_client_getattr_dotl+0xb0/0x1a0 [ 2994.383515][ T111] v9fs_vfs_getattr_dotl+0x115/0x360 [ 2994.383719][ T111] vfs_getattr_nosec+0x22c/0x3a0 [ 2994.383910][ T111] vfs_statx+0xd7/0x170 [ 2994.384062][ T111] vfs_fstatat+0x45/0x80 [ 2994.384215][ T111] __do_sys_newfstatat+0x84/0xe0 [ 2994.384386][ T111] do_syscall_64+0x115/0x6a0 [ 2994.384566][ T111] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 2994.399720][ T111] WARNING: mm/slub.c:1244 at __kmem_cache_shutdown+0x363/0x500, CPU#0: busybox/111 [ 2994.405655][ T111] Call Trace: [ 2994.406325][ T111] kmem_cache_destroy+0x73/0x1b0 [ 2994.406630][ T111] p9_client_destroy+0x271/0x3c0 [ 2994.407210][ T111] v9fs_session_close+0x3c/0x260 [ 2994.407409][ T111] v9fs_kill_super+0x48/0x90 [ 2994.407584][ T111] deactivate_locked_super+0xa3/0x160 [ 2994.407778][ T111] cleanup_mnt+0x1dd/0x3e0 Thus, a successful umount left objects in the 9p fcall cache and prevented the cache from being destroyed cleanly. Per-CPU shrink_qlist storage exists for every possible CPU, and each list is protected by its own raw spinlock. Iterate over possible CPUs so that a list populated before its CPU went offline is drained as well. for_each_possible_cpu() can do more work than for_each_online_cpu(), but this change only affects CONFIG_KASAN_GENERIC kernels. The extra work is limited to cache shrink and cache destruction paths and does not affect the normal allocation/free fast path. It adds one raw-spinlock-protected scan of each possible CPU's shrink list. These lists are normally empty; a non-empty list is traversed to remove objects belonging to the cache being shrunk or destroyed. | ||||
| CVE-2026-69328 | 1 Microsoft | 21 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 18 more | 2026-09-24 | 7.8 High |
| Untrusted search path in Windows Storage allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-93206 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: PCI/proc: Use file_ns_capable() when checking config space read access proc_bus_pci_read() decides how much of the config space is readable based on capable(CAP_SYS_ADMIN), which checks the credentials of the task calling read(), not the credentials of the process that opened the file. The sysfs equivalent, pci_read_config(), has checked the credentials of the opening process since commit de139a339395 ("pci: check caps from sysfs file open to read device dependent config space"), so a privileged process can open the config space file and pass the file descriptor to an unprivileged process (for example, a process running a KVM guest with an assigned device), which can then read the entire config space. The check was subsequently routed through the LSM framework in commit 47970b1b2aa6 ("pci: use security_capable() when checking capablities during config space read") and converted to the dedicated helper in commit ab0fa82b2df9 ("pci-sysfs: use proper file capability helper function"). Thus, the two interfaces check the same capability against different credentials. Checking the credentials of the task calling read() makes the outcome depend on who reads rather than who opened, so the restriction is bypassed whenever a more privileged process reads through the descriptor. Checking the credentials recorded in file->f_cred settles the decision at open() time and ties it to the file, where it cannot change with the caller. Use file_ns_capable() to check CAP_SYS_ADMIN against the credentials in effect when the file was opened, bringing the procfs interface in line with the sysfs behaviour. As a result, a file descriptor opened by a privileged process and passed to an unprivileged one now allows the entire config space to be read through procfs, matching sysfs. | ||||
| CVE-2026-69331 | 1 Microsoft | 25 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 22 more | 2026-09-24 | 7 High |
| Use after free in Windows Remote Access Connection Manager allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-67405 | 2 Rabbitmq, Redhat | 2 Rabbitmq-server, Hummingbird | 2026-09-24 | 8.1 High |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, Neither the Web-MQTT handler (deps/rabbitmq_web_mqtt/src/rabbit_web_mqtt_handler.erl:104) nor the Web-STOMP handler (deps/rabbitmq_web_stomp/src/rabbit_web_stomp_handler.erl:102) validates the Origin header on the WebSocket upgrade. Under ssl_cert_login=true, the browser presents the client certificate automatically, so an attacker's JavaScript running in the victim's browser can authenticate as the victim. Preconditions include The non-default configuration use_http_auth=true (Web-STOMP) or ssl_cert_login=true (both plugins) must be enabled. The issue is harmless under the default in-band CONNECT credential configuration.. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. | ||||
| CVE-2026-67231 | 1 Rabbitmq | 1 Rabbitmq-server | 2026-09-24 | 8.1 High |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, The trust-store plugin installs a verify_fun that overrides {bad_cert, unknown_ca} / {bad_cert, selfsigned_peer} when the presented cert "matches" a whitelisted one. The match key is extract_issuer_id/1 → public_key:pkix_issuer_id/2 → {IssuerName, SerialNumber} , both fields are taken verbatim from the presented certificate body and contain no public-key, SKI, fingerprint or signature material. is_whitelisted/1 is a pure ets:member lookup; the stored full DER is used only for list/0 display and is never compared against the presented cert. cacerts is [], so the whitelisted cert is never used as a trust anchor for path validation either. TLS client-authentication bypass: an attacker who knows the issuer DN + serial of any whitelisted certificate can connect with a forged self-signed cert. Preconditions include rabbitmq_trust_store plugin enabled and used as the TLS verify_fun Attacker knows or can guess the {Issuer, Serial} of at least one whitelisted cert (non-secret; exposed via CLI/logs/any cert copy). This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. | ||||
| CVE-2026-67218 | 2 Rabbitmq, Redhat | 2 Rabbitmq-server, Hummingbird | 2026-09-24 | 4.3 Medium |
| RabbitMQ is a messaging and streaming broker. Prior to versions 4.0.22, 4.1.11, 4.2.6, and 4.3.0, accept_content/2 at line 56 calls rabbit_stream_manager:create_super_stream/... directly after is_authorized (which only checks the management tag + vhost access via is_authorized_vhost). The stream-protocol equivalent (rabbit_stream_reader.erl create_super_stream handler) calls rabbit_stream_utils:check_super_stream_management_permitted/4 which enforces configure on the exchange and each partition queue. The HTTP handler omits this call entirely. A user with management tag and vhost access , but no configure permission on any resource , can create super-streams (an exchange + N partition stream queues + bindings) via the HTTP API. The native stream-protocol path enforces configure on each resource; the HTTP path does not, creating a privilege escalation from 'can view' to 'can create persistent cluster-wide resources.' Preconditions include rabbitmq_stream_management plugin enabled management tag + vhost access (no resource permissions needed). This issue is fixed in versions 4.0.22, 4.1.11, 4.2.6, and 4.3.0. | ||||
| CVE-2026-66079 | 2 Rabbitmq, Redhat | 2 Rabbitmq-server, Hummingbird | 2026-09-24 | 7.5 High |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6, parse_array_primitive/2 for constructor 0x45 (list0) returns an element with byte-width B = 0. The enclosing array32 parser at line 148 reads a 4-byte Count from the wire and loops Count times consuming B bytes each , with B = 0, no input is consumed and the loop builds a list of Count empty elements bounded only by the 32-bit field. The SASL-mechanisms / SASL-init frame is parsed by amqp10_framing:decode_bin/1 from rabbit_amqp_reader.erl:412 before authentication completes. The pre-auth incoming_max_frame_size (default 8192 bytes) caps the frame, not the Count field, so a 19-byte payload with Count = 0xFFFFFFFF is accepted. No max_heap_size is set on the reader process. An unauthenticated network attacker can crash any RabbitMQ node that has the AMQP 1.0 listener enabled (default port 5672) by sending a single ~19-byte frame. The reader process attempts to build a list of ~4 billion empty elements, exhausting heap memory and terminating the Erlang VM. All tenants and protocols on the node lose service. Preconditions include Network reachability to the AMQP listener (port 5672, enabled by default) No authentication required. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6. | ||||
| CVE-2026-66075 | 2 Rabbitmq, Redhat | 2 Rabbitmq-server, Hummingbird | 2026-09-24 | 4.3 Medium |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1, is_authorized/2 for the /federation-links/.../restart route uses is_authorized_monitor (accepts the monitoring tag), while allowed_methods permits DELETE and delete_resource/2 triggers rabbit_federation_link_sup:restart. There is no per-method elevation check and no comment marking it intentional. A read-only monitoring user can restart any federation link , a state-changing operation that disrupts message flow. Preconditions include rabbitmq_federation + rabbitmq_federation_management plugins enabled Attacker has credentials with the monitoring tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1. | ||||
| CVE-2026-66067 | 1 Rabbitmq | 1 Rabbitmq-server | 2026-09-24 | 6.5 Medium |
| RabbitMQ is a messaging and streaming broker. Prior to versions 4.2.7 and 4.3.1, The stream open handler calls only check_vhost_access; it omits the node/vhost/user connection-limit checks that rabbit_reader performs for AMQP. A developer %% FIXME comment at the cited line explicitly acknowledges the gap. No compensating enforcement exists in connection tracking or elsewhere in rabbitmq_stream. An authenticated tenant can fully bypass operator-configured per-user and per-vhost connection caps by connecting via port 5552 instead of 5672. Preconditions include rabbitmq_stream plugin enabled Authenticated stream-protocol credentials Operator relies on per-user/per-vhost connection limits for tenant isolation. This issue is fixed in versions 4.2.7 and 4.3.1. | ||||
| CVE-2026-67221 | 1 Rabbitmq | 1 Rabbitmq-server | 2026-09-24 | 4.9 Medium |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, The AMQP 0-9-1 shovel calls amqp_uri:remove_credentials before storing its connection URI, but the AMQP 1.0 shovel stores the raw URI including the password. The stored URI is visible via GET /api/shovels and via rabbitmqctl shovel_status. Preconditions include The Shovel plugin must be in use with AMQP 1.0 shovels configured using URI-embedded credentials. Reading the exposed status requires the monitoring tag.. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. | ||||
| CVE-2026-66074 | 1 Rabbitmq | 1 Rabbitmq-server | 2026-09-24 | 6.5 Medium |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, match_value/3 passes the user-supplied ?name= regular expression to re:run with no match_limit option, and executes it once per resource in the result set. OTP's default 10M match_limit caps each call at roughly 100-200ms, but the regex runs once per resource in the result set. With a large set, for example 5000 queues at 150ms each, a single request consumes 12 or more minutes of CPU. Parallel requests saturate the schedulers. The use_regex=true option is a supported feature on list endpoints, so this path is reachable through normal API use. Preconditions include Any user with the management tag can exploit this.. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. | ||||
| CVE-2026-69334 | 1 Microsoft | 26 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 23 more | 2026-09-24 | 8.8 High |
| Heap-based buffer overflow in Windows Volume Manager Extension Driver allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-69335 | 1 Microsoft | 26 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 23 more | 2026-09-24 | 7 High |
| Use after free in Windows Win32K allows an authorized attacker to elevate privileges locally. | ||||