| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bridge: fix stale prevhdr pointer in br_ip6_fragment()
br_ip6_fragment() gets prevhdr, a pointer into the skb head, from
ip6_find_1stfragopt(), then calls skb_checksum_help(). For a cloned skb
skb_checksum_help() reallocates the head via pskb_expand_head(), leaving
prevhdr dangling. It is later dereferenced in ip6_frag_next(), causing a
use-after-free write.
Save prevhdr's offset before skb_checksum_help() and recompute it after,
like commit ef0efcd3bd3f ("ipv6: Fix dangling pointer when ipv6
fragment").
BUG: KASAN: slab-use-after-free in ip6_frag_next (net/ipv6/ip6_output.c:857)
Write of size 1 at addr ffff888013ff5016 by task exploit/141
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
ip6_frag_next (net/ipv6/ip6_output.c:857)
br_ip6_fragment (net/ipv6/netfilter.c:212)
nf_ct_bridge_post (net/bridge/netfilter/nf_conntrack_bridge.c:407)
nf_hook_slow (net/netfilter/core.c:619)
br_forward_finish (net/bridge/br_forward.c:66)
__br_forward (net/bridge/br_forward.c:115)
maybe_deliver (net/bridge/br_forward.c:191)
br_flood (net/bridge/br_forward.c:245)
br_handle_frame_finish (net/bridge/br_input.c:229)
br_handle_frame (net/bridge/br_input.c:442)
...
packet_sendmsg (net/packet/af_packet.c:3114)
...
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject fragmented frames in devmap
Devmap broadcast redirects clone the packet for all but the last
destination.
For native XDP, that clone path copies only the linear xdp_frame data,
while fragmented frames keep skb_shared_info in tailroom outside the
linear area. Cloning such a frame leaves XDP_FLAGS_HAS_FRAGS set but
without valid frag metadata, and the later free path can interpret
uninitialized tail data as skb_shared_info, leading to an out-of-bounds
access during frame return.
Reject fragmented native XDP frames in dev_map_enqueue_clone().
Add the same restriction to the generic XDP clone path in
dev_map_redirect_clone(). Generic XDP represents fragmented packets as
nonlinear skbs, and rejecting them here keeps clone-based broadcast
support aligned between native and generic XDP. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: qcom-cpufreq-hw: Fix possible double free
qcom_cpufreq.data is allocated with devm_kzalloc() in probe() as an
array of per-domain data. qcom_cpufreq_hw_cpu_init() stores a pointer to
one element of this array in policy->driver_data.
qcom_cpufreq_hw_cpu_exit() currently calls kfree() on policy->driver_data.
This is not valid because the memory is devm-managed. For the first
domain, this can free the devm-managed allocation while the devres entry
is still active, leading to a possible double free when the platform
device is later detached. For other domains, the pointer may refer to an
element inside the array rather than the allocation base.
Remove the kfree(data) call and let devres release qcom_cpufreq.data.
This issue was found by a static analysis tool I am developing. |
| An issue was discovered in Quest KACE Systems Deployment Appliance (SMA) 11.0.273. Certain API endpoints contain a rate-limiting feature to minimize a brute-force attack. This protection can be bypassed by removing the kboxid cookie. |
| An issue was discovered in Quest KACE Systems Deployment Appliance (SMA) 11.0.273. It uses a hardcoded symmetric encryption key to encrypt secrets in the MySQL databases. (This key is not unique for each installation.) An attacker that gains access to the MySQL server or a backup files can decrypt the secrets. Often, the decrypted secrets can be used to escalate privileges within KACE, or gain privileged access to unrelated systems or services. |
| A logic issue was addressed with improved restrictions. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. An app may be able to intercept network connections intended for another process. |
| Authorization Bypass in the emergency recovery approval component in Ente Technologies Ente Museum Server allows an authenticated attacker configured as a victim's emergency contact to bypass the configured recovery waiting period and take over the victim's account via a crafted `approve-recovery` API request. |
| An issue in Hugo Leisink Hiawatha v.12.1 and before allows a remote attacker to execute arbitrary code via a crafted request |
| An issue in FeehiCMS v.2.1.1 allows an attacker to escalate privileges via the Session management module, authentication logic, logout handler components |
| An issue in the parseGoosePayload() function (/goose/goose_receiver.c) of libiec61850 v1.6 allows attackers to bypass authentication via a captured GOOSE frame. |
| When using the "tarfile" module with a file opened in "streaming mode" (mode="r|") the tarfile module did not properly handle EOF, making archive parsing take exponentially longer. |
| The import hook in CPython that handles legacy *.pyc files (SourcelessFileLoader) is incorrectly handled in FileLoader (a base class) and so does not use io.open_code() to read the .pyc files. sys.audit handlers for this audit event therefore do not fire. |
| The fix for CVE-2026-0672, which rejected control characters in http.cookies.Morsel, was incomplete. The Morsel.update(), |= operator, and unpickling paths were not patched, allowing control characters to bypass input validation. Additionally, BaseCookie.js_output() lacked the output validation applied to BaseCookie.output(). |
| When an Expat parser with a registered ElementDeclHandler parses an inline
document type definition containing a deeply nested content model a C stack
overflow occurs. |
| In the Tarfile.extract() function, the filter parameter is not passed properly when extracting hardlinks. An affected system that extracts content from untrusted tar files could end up writing files with an unexpected uid/gid despite the user passing filter='data' to the extract() function. |
| Mitgation of CVE-2026-4519 was incomplete. If the URL contained "%action" the mitigation could be bypassed for certain browser types the "webbrowser.open()" API could have commands injected into the underlying shell. See CVE-2026-4519 for details. |
| Use-after-free (UAF) was possible in the `lzma.LZMADecompressor`, `bz2.BZ2Decompressor`, and `gzip.GzipFile` when a memory allocation fails with a `MemoryError` and the decompression instance is re-used. This scenario can be triggered if the process is under memory pressure. The fix cleans up the dangling pointer in this specific error condition.
The vulnerability is only present if the program re-uses decompressor instances across multiple decompression calls even after a `MemoryError` is raised during decompression. Using the helper functions to one-shot decompress data such as `lzma.decompress()`, `bz2.decompress()`, `gzip.decompress()`, and `zlib.decompress()` are not affected as a new decompressor instance is used per call. If the decompressor instance is not re-used after an error condition, this usage is similarly not vulnerable. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: altera: Fix resource leaks on probe failure
The chained IRQ handler is set during probe, but is only removed during the
driver remove(). If pci_host_probe() fails, the handler and INTx IRQ
domain remain set even though the devm-managed host bridge storage
containing struct altera_pcie will be released, leaving the handler with
a stale data pointer.
Interrupts are also enabled before pci_host_probe() is called. If probe
fails after that point, the controller interrupt source should be disabled
before the chained handler and INTx domain are removed.
So set the chained handler only after the INTx domain has been created.
Disable controller interrupts during IRQ teardown, and tear the IRQ setup
down if pci_host_probe() fails.
[mani: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: avoid kobject path lookup in DualSense match
The DualSense jack-detection input handler verifies that a matching input
device belongs to the same physical controller by building kobject path
strings for both the input device and the USB audio device, then comparing
the path prefix.
This was observed when a weak physical connection caused the controller
to rapidly disconnect and reconnect. During that repeated hotplug,
snd_dualsense_ih_match() can run while the controller's USB device is
being disconnected. kobject_get_path() walks ancestor kobjects and
dereferences their names; if the USB device kobject name is no longer
valid, this can fault in strlen():
RIP: 0010:strlen+0x10/0x30
Call Trace:
kobject_get_path+0x34/0x150
snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio]
input_register_device+0x566/0x6a0
ps_probe+0xb89/0x1590 [hid_playstation]
The same ownership check can be done without building kobject path
strings. The input device is parented below the HID device, USB interface
and USB device, so walking the input device parent chain and comparing
against the mixer USB device preserves the check without dereferencing
kobject names during disconnect. |
| This issue was addressed with improved handling of symlinks. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. An app may be able to modify protected parts of the file system. |
