| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix potential kernel oops when probe fails
When probe of the sdio brcmfmac device fails for some reasons (i.e.
missing firmware), the sdiodev->bus is set to error instead of NULL, thus
the cleanup later in brcmf_sdio_remove() tries to free resources via
invalid bus pointer. This happens because sdiodev->bus is set 2 times:
first in brcmf_sdio_probe() and second time in brcmf_sdiod_probe(). Fix
this by chaning the brcmf_sdio_probe() function to return the error code
and set sdio->bus only there. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: imx_rproc: Fix invalid loaded resource table detection
imx_rproc_elf_find_loaded_rsc_table() may incorrectly report a loaded
resource table even when the current firmware does not provide one.
When the device tree contains a "rsc-table" entry, priv->rsc_table is
non-NULL and denotes where a resource table would be located if one is
present in memory. However, when the current firmware has no resource
table, rproc->table_ptr is NULL. The function still returns
priv->rsc_table, and the remoteproc core interprets this as a valid loaded
resource table.
Fix this by returning NULL from imx_rproc_elf_find_loaded_rsc_table() when
there is no resource table for the current firmware (i.e. when
rproc->table_ptr is NULL). This aligns the function's semantics with the
remoteproc core: a loaded resource table is only reported when a valid
table_ptr exists.
With this change, starting firmware without a resource table no longer
triggers a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
mux: mmio: fix regmap leak on probe failure
The mmio regmap that may be allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: enable basic endpoint checking
pegasus_probe() fills URBs with hardcoded endpoint pipes without
verifying the endpoint descriptors:
- usb_rcvbulkpipe(dev, 1) for RX data
- usb_sndbulkpipe(dev, 2) for TX data
- usb_rcvintpipe(dev, 3) for status interrupts
A malformed USB device can present these endpoints with transfer types
that differ from what the driver assumes.
Add a pegasus_usb_ep enum for endpoint numbers, replacing magic
constants throughout. Add usb_check_bulk_endpoints() and
usb_check_int_endpoints() calls before any resource allocation to
verify endpoint types before use, rejecting devices with mismatched
descriptors at probe time, and avoid triggering assertion.
Similar fix to
- commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking")
- commit 9e7021d2aeae ("net: usb: catc: enable basic endpoint checking") |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: CGX: fix bitmap leaks
The RX/TX flow-control bitmaps (rx_fc_pfvf_bmap and tx_fc_pfvf_bmap)
are allocated by cgx_lmac_init() but never freed in cgx_lmac_exit().
Unbinding and rebinding the driver therefore triggers kmemleak:
unreferenced object (size 16):
backtrace:
rvu_alloc_bitmap
cgx_probe
Free both bitmaps during teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: handle attr_set_size() errors when truncating files
If attr_set_size() fails while truncating down, the error is silently
ignored and the inode may be left in an inconsistent state. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: bcm_vk: Fix possible null-pointer dereferences in bcm_vk_read()
In the function bcm_vk_read(), the pointer entry is checked, indicating
that it can be NULL. If entry is NULL and rc is set to -EMSGSIZE, the
following code may cause null-pointer dereferences:
struct vk_msg_blk tmp_msg = entry->to_h_msg[0];
set_msg_id(&tmp_msg, entry->usr_msg_id);
tmp_msg.size = entry->to_h_blks - 1;
To prevent these possible null-pointer dereferences, copy to_h_msg,
usr_msg_id, and to_h_blks from iter into temporary variables, and return
these temporary variables to the application instead of accessing them
through a potentially NULL entry. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: nlink overflow in jfs_rename
If nlink is maximal for a directory (-1) and inside that directory you
perform a rename for some child directory (not moving from the parent),
then the nlink of the first directory is first incremented and later
decremented. Normally this is fine, but when nlink = -1 this causes a
wrap around to 0, and then drop_nlink issues a warning.
After applying the patch syzbot no longer issues any warnings. I also
ran some basic fs tests to look for any regressions. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: magicmouse: Do not crash on missing msc->input
Fake USB devices can send their own report descriptors for which the
input_mapping() hook does not get called. In this case, msc->input stays NULL,
leading to a crash at a later time.
Detect this condition in the input_configured() hook and reject the device.
This is not supposed to happen with actual magic mouse devices, but can be
provoked by imposing as a magic mouse USB device. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/ras: Move ras data alloc before bad page check
In the rare event if eeprom has only invalid address entries,
allocation is skipped, this causes following NULL pointer issue
[ 547.103445] BUG: kernel NULL pointer dereference, address: 0000000000000010
[ 547.118897] #PF: supervisor read access in kernel mode
[ 547.130292] #PF: error_code(0x0000) - not-present page
[ 547.141689] PGD 124757067 P4D 0
[ 547.148842] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 547.158504] CPU: 49 PID: 8167 Comm: cat Tainted: G OE 6.8.0-38-generic #38-Ubuntu
[ 547.177998] Hardware name: Supermicro AS -8126GS-TNMR/H14DSG-OD, BIOS 1.7 09/12/2025
[ 547.195178] RIP: 0010:amdgpu_ras_sysfs_badpages_read+0x2f2/0x5d0 [amdgpu]
[ 547.210375] Code: e8 63 78 82 c0 45 31 d2 45 3b 75 08 48 8b 45 a0 73 44 44 89 f1 48 8b 7d 88 48 89 ca 48 c1 e2 05 48 29 ca 49 8b 4d 00 48 01 d1 <48> 83 79 10 00 74 17 49 63 f2 48 8b 49 08 41 83 c2 01 48 8d 34 76
[ 547.252045] RSP: 0018:ffa0000067287ac0 EFLAGS: 00010246
[ 547.263636] RAX: ff11000167c28130 RBX: ff11000127600000 RCX: 0000000000000000
[ 547.279467] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ff11000125b1c800
[ 547.295298] RBP: ffa0000067287b50 R08: 0000000000000000 R09: 0000000000000000
[ 547.311129] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[ 547.326959] R13: ff11000217b1de00 R14: 0000000000000000 R15: 0000000000000092
[ 547.342790] FS: 0000746e59d14740(0000) GS:ff11017dfda80000(0000) knlGS:0000000000000000
[ 547.360744] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 547.373489] CR2: 0000000000000010 CR3: 000000019585e001 CR4: 0000000000f71ef0
[ 547.389321] PKRU: 55555554
[ 547.395316] Call Trace:
[ 547.400737] <TASK>
[ 547.405386] ? show_regs+0x6d/0x80
[ 547.412929] ? __die+0x24/0x80
[ 547.419697] ? page_fault_oops+0x99/0x1b0
[ 547.428588] ? do_user_addr_fault+0x2ee/0x6b0
[ 547.438249] ? exc_page_fault+0x83/0x1b0
[ 547.446949] ? asm_exc_page_fault+0x27/0x30
[ 547.456225] ? amdgpu_ras_sysfs_badpages_read+0x2f2/0x5d0 [amdgpu]
[ 547.470040] ? mas_wr_modify+0xcd/0x140
[ 547.478548] sysfs_kf_bin_read+0x63/0xb0
[ 547.487248] kernfs_file_read_iter+0xa1/0x190
[ 547.496909] kernfs_fop_read_iter+0x25/0x40
[ 547.506182] vfs_read+0x255/0x390
This also result in space left assigned to negative values.
Moving data alloc call before bad page check resolves both the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: Add buffer to list only after successful allocation
Move `list_add_tail()` to after `dma_alloc_attrs()` succeeds when creating
internal buffers. Previously, the buffer was enqueued in `buffers->list`
before the DMA allocation. If the allocation failed, the function returned
`-ENOMEM` while leaving a partially initialized buffer in the list, which
could lead to inconsistent state and potential leaks.
By adding the buffer to the list only after `dma_alloc_attrs()` succeeds,
we ensure the list contains only valid, fully initialized buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV"
This reverts commit 05703271c3cd ("PCI/IOV: Add PCI rescan-remove locking
when enabling/disabling SR-IOV"), which causes a deadlock by recursively
taking pci_rescan_remove_lock when sriov_del_vfs() is called as part of
pci_stop_and_remove_bus_device(). For example with the following sequence
of commands:
$ echo <NUM> > /sys/bus/pci/devices/<pf>/sriov_numvfs
$ echo 1 > /sys/bus/pci/devices/<pf>/remove
A trimmed trace of the deadlock on a mlx5 device is as below:
zsh/5715 is trying to acquire lock:
000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: sriov_disable+0x34/0x140
but task is already holding lock:
000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_stop_and_remove_bus_device_locked+0x24/0x80
...
Call Trace:
[<00000259778c4f90>] dump_stack_lvl+0xc0/0x110
[<00000259779c844e>] print_deadlock_bug+0x31e/0x330
[<00000259779c1908>] __lock_acquire+0x16c8/0x32f0
[<00000259779bffac>] lock_acquire+0x14c/0x350
[<00000259789643a6>] __mutex_lock_common+0xe6/0x1520
[<000002597896413c>] mutex_lock_nested+0x3c/0x50
[<00000259784a07e4>] sriov_disable+0x34/0x140
[<00000258f7d6dd80>] mlx5_sriov_disable+0x50/0x80 [mlx5_core]
[<00000258f7d5745e>] remove_one+0x5e/0xf0 [mlx5_core]
[<00000259784857fc>] pci_device_remove+0x3c/0xa0
[<000002597851012e>] device_release_driver_internal+0x18e/0x280
[<000002597847ae22>] pci_stop_bus_device+0x82/0xa0
[<000002597847afce>] pci_stop_and_remove_bus_device_locked+0x5e/0x80
[<00000259784972c2>] remove_store+0x72/0x90
[<0000025977e6661a>] kernfs_fop_write_iter+0x15a/0x200
[<0000025977d7241c>] vfs_write+0x24c/0x300
[<0000025977d72696>] ksys_write+0x86/0x110
[<000002597895b61c>] __do_syscall+0x14c/0x400
[<000002597896e0ee>] system_call+0x6e/0x90
This alone is not a complete fix as it restores the issue the cited commit
tried to solve. A new fix will be provided as a follow on. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wan/fsl_ucc_hdlc: Fix dma_free_coherent() in uhdlc_memclean()
The priv->rx_buffer and priv->tx_buffer are alloc'd together as
contiguous buffers in uhdlc_init() but freed as two buffers in
uhdlc_memclean().
Change the cleanup to only call dma_free_coherent() once on the whole
buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/arm-cmn: Reject unsupported hardware configurations
So far we've been fairly lax about accepting both unknown CMN models
(at least with a warning), and unknown revisions of those which we
do know, as although things do frequently change between releases,
typically enough remains the same to be somewhat useful for at least
some basic bringup checks. However, we also make assumptions of the
maximum supported sizes and numbers of things in various places, and
there's no guarantee that something new might not be bigger and lead
to nasty array overflows. Make sure we only try to run on things that
actually match our assumptions and so will not risk memory corruption.
We have at least always failed on completely unknown node types, so
update that error message for clarity and consistency too. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-pl: handle probe errors
Errors in init must be reported back or we'll
follow a NULL pointer the first time FF is used. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: remove xfs_attr_leaf_hasname
The calling convention of xfs_attr_leaf_hasname() is problematic, because
it returns a NULL buffer when xfs_attr3_leaf_read fails, a valid buffer
when xfs_attr3_leaf_lookup_int returns -ENOATTR or -EEXIST, and a
non-NULL buffer pointer for an already released buffer when
xfs_attr3_leaf_lookup_int fails with other error values.
Fix this by simply open coding xfs_attr_leaf_hasname in the callers, so
that the buffer release code is done by each caller of
xfs_attr3_leaf_read. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix incorrect early exits in volume label handling
Crafted EROFS images containing valid volume labels can trigger
incorrect early returns, leading to folio reference leaks.
However, this does not cause system crashes or other severe issues. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: chemical: sps30_i2c: fix buffer size in sps30_i2c_read_meas()
sizeof(num) evaluates to sizeof(size_t) (8 bytes on 64-bit) instead
of the intended __be32 element size (4 bytes). Use sizeof(*meas) to
correctly match the buffer element type. |
| In the Linux kernel, the following vulnerability has been resolved:
memory: mtk-smi: fix device leak on larb probe
Make sure to drop the reference taken when looking up the SMI device
during larb probe on late probe failure (e.g. probe deferral) and on
driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
memory: mtk-smi: fix device leaks on common probe
Make sure to drop the reference taken when looking up the SMI device
during common probe on late probe failure (e.g. probe deferral) and on
driver unbind. |
