| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| bt_sdp_parse_attribute() in subsys/bluetooth/host/classic/sdp.c validated only that the SDP record buffer held the type-marker byte plus the 2-byte attribute ID (a check of buf->len < 3) but then read a fourth byte, the data-element descriptor (type), via net_buf_simple_pull_u8(). Because net_buf_simple_pull_u8() dereferences buf->data[0] before its only bounds guard (an __ASSERT_NO_MSG that compiles out when CONFIG_ASSERT is disabled, the production default), a record of exactly three bytes (0x09 followed by a 2-byte attribute ID) causes a one-byte read past the end of the logical buffer. The parser is reachable from inbound, remote-controlled data: a Bluetooth BR/EDR peer acting as an SDP server returns discovery-response records that are stored verbatim in the client receive buffer and parsed via the public bt_sdp_get_attr()/bt_sdp_has_attr()/bt_sdp_record_parse() helpers. The over-read is bounded to a single byte that is used only as an internal length selector and is never leaked to the attacker; subsequent length checks then reject the malformed record. Realistic impact is therefore limited to an edge-case denial of service (a fault only if the record ends exactly at a mapped-memory boundary, or a deterministic assert panic when CONFIG_ASSERT=y). Affects Zephyr v4.3.0 and v4.4.0; fixed by adding sizeof(type) to the length check. |
| Quicly is an IETF QUIC protocol implementation intended primarily for use within the H2O HTTP server. Prior to commit 937d0e9, an assertion failure is raised when the total number of valid handshake messages received over a CRYPTO stream of a single packet number space exceeds 32KB, causing a Denial of Service. This issue has been fixed by commit 937d0e9. |
| An issue was discovered in cyrus-imapd in Cyrus IMAP through 3.12.2. URLAUTH does not honor revoked authorizer access. A URLAUTH URL minted while the authorizer had access continued to work after that access was revoked. |
| PlaywrightCapture stored capture-specific configuration and runtime data as mutable class-level variables rather than instance-level variables. Consequently, multiple Capture objects running within the same Python process could share state, including HTTP headers, cookies, browser storage, HTTP credentials, proxy configuration, user-agent settings, geolocation information, and captured request data.
In a multi-user or concurrent deployment, information supplied during one capture could therefore persist and be reused by a subsequent or parallel capture. This could result in the disclosure of authentication cookies, credentials, browser storage, or captured request data belonging to another user. It could also cause requests to be performed with another capture's authentication context, headers, or proxy configuration, potentially enabling unauthorized access to remote resources or interference with other capture operations.
The vulnerability is resolved by initializing all capture-specific settings and request data as instance variables in the Capture constructor, ensuring that state is isolated between capture operations. |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.10, org.hl7.fhir.utilities.XsltUtilities saxonTransform(...) overloads instantiated a bare net.sf.saxon.TransformerFactoryImpl() without ACCESS_EXTERNAL_DTD or ACCESS_EXTERNAL_STYLESHEET restrictions, allowing an attacker who controls or can tamper with transformed XML to trigger XML External Entity injection for local file disclosure and blind XXE or SSRF to arbitrary URLs reachable from the host. This issue is fixed in version 6.9.10. |
| open-webui before 0.3.14 contains a cross-origin resource sharing misconfiguration allowing arbitrary origins with allow_origins=* and authenticated requests to the /api/v1/functions endpoint. Attackers can execute arbitrary code on the openwebui instance by crafting malicious cross-site requests from attacker-controlled websites when an admin user visits them. |
| decompress before 4.2.2 allows arbitrary symlink creation during archive extraction. When processing symlink entries (type === 'symlink'), the x.linkname field from the archive is passed directly to fs.symlink() without validation (index.js line 121). The preventWritingThroughSymlink check on line 98 only applies to file entries, not symlink creation. An attacker can craft an archive with symlink entries pointing to sensitive files outside the extraction directory (e.g., /etc/passwd), enabling information disclosure when the application reads the extracted contents. |
| A UNIX Symbolic Link (Symlink) Following vulnerability in openSUSE Tumbleweed suricata package allows the suricata user to escalate to root.
This issue affects openSUSE Tumbleweed: from ? before 8.0.5-2.1; openSUSE Tumbleweed: from ? before 8.0.5-2.1. |
| An invalidly formatted IKEv2 fragment causes the Libreswan pluto daemon to crash and restart. Continued exploitation would cause a denial of service. The function reassemble_v2_incoming_fragments() would ignore unknown outer payloads but still store these in a fixed size array msg_digest.digest[PAYLIMIT]. An off-by-one error in the assertion PASSERT(logger, md->digest_roof < elemsof(md->digest)) causes the daemon to abort. No remote code execution is possible. Any configuration that allows IKEv2 connections that do not set fragmentation=no are vulnerable. IKEv1 is not affected. |
| Libreswan, via the function RSA_authenticate_hash_signature_pkcs1_1_5_rsa(), did not correctly verify the DER encoding of the ASN.1 digest when the IKEv2 AUTH payload was encoded using RSASSA-PKCS1-v1_5 (RFC 8017). A remote attacker can use a variation on the Bleichenbacher attack to forge the AUTH payload when small public exponents are used (e.g., e=3), leading to impersonation. Additionally, a remote attacker, by encoding a shorter than expected hash in the AUTH payload, could trigger an assertion leading to denial-of-service. The daemon aborts and restarts; continued exploitation causes sustained denial of service. Remote code execution is not possible. X.509 certificate verifications of the remote IKE peer are not affected. |
| Libreswan, via the function RSA_authenticate_hash_signature_raw_rsa(), did not correctly verify the length of the authentication hash when the SIG payload of an IKEv1 packet was encoded using PKCS #1 RSA Encryption as per RFC 2313. A remote attacker can use a variation on the Bleichenbacher attack to forge the SIG payload when small public exponents are being used (e.g., e=3), which could lead to impersonation. Additionally, a remote attacker, by encoding a shorter than expected hash in the SIG payload, could trigger an assertion leading to denial-of-service. The daemon aborts and restarts; continued exploitation causes sustained denial of service. Remote code execution is not possible. X.509 certificate verifications of remote IKE peers are not affected. |
| Multiple connections to the backend using the same charging station ID
are allowed, which could allow an attacker to deploy multiple instances
of malicious OCPP clients to overwhelm the backend. |
| ZITADEL is an open source identity management platform. Prior to 3.4.12 and 4.15.2, ZITADEL is an open source identity management platform. From 3.0.0-rc.1 through 3.4.11 and from 4.0.0-rc.1 through 4.15.1, ZITADEL's external JWT Identity Provider validation in internal/idp/providers/jwt/session.go skips expiration handling when an incoming token omits the exp claim, allowing a token from a trusted issuer to be treated as valid without an automatic expiration window. This issue is fixed in versions 3.4.12 and 4.15.2. |
| ZITADEL is an open source identity management platform. Prior to 3.4.12 and 4.15.2, ZITADEL's external JWT Identity Provider validation in internal/idp/providers/jwt/session.go skips the maximum token age freshness check when an incoming token omits the iat claim, allowing arbitrarily old tokens from a trusted issuer to pass authentication. This issue is fixed in versions 3.4.12 and 4.15.2. |
| Insufficient Session Expiration, Authentication Bypass by Capture-replay vulnerability in Apache IoTDB.
REST Basic Authentication Accepts Stale Cached Credentials
This issue affects Apache IoTDB: from 1.0.0 before 2.0.10.
Users are recommended to upgrade to version 2.0.10, which fixes the issue. |
| The input file does not need to be strictly in a structurally valid PDF format. Instead, after reviewing the content, the original document disguised as a PDF will be sent to the parser. Malicious documents will construct malicious external entities that, through the protocol, point to local paths, thereby allowing access to any local files within the user's permission range. |
| On Unix systems, opening a file in an os.Root improperly follows symlinks to locations outside of the Root when the final path component of the a path is a symbolic link and the path ends in /. For example, 'root.Open("symlink/")' will open "symlink" even when "symlink" is a symbolic link pointing outside of the root. |
| Open WebUI is an extensible, feature-rich, and user-friendly self-hosted AI platform. From 0.9.0 before 0.10.0 with Redis configured, Socket.IO connect, user-join, join-channels, join-note, and the terminal websocket first-message authentication used decode_token without the Redis-backed is_valid_token revocation check, allowing revoked JWTs to continue authenticating realtime connections. This issue is fixed in version 0.10.0. |
| An Improper Input Validation vulnerability in BigQuery DAO in Google Cloud Apigee versions prior to 2026-06-12 on Google Cloud Platform allows an authenticated attacker to exfiltrate cross-tenant data.
This vulnerability was patched on 12 June 2026 on the Apigee Servers, and no customer action is needed. |
| CoreWCF is a port of the service side of Windows Communication Foundation (WCF) to .NET Core. Prior to 1.8.1 and 1.9.1, CoreWCF SAML token replay protection is inoperative because DefaultTokenReplayCache.TryAdd does not reject duplicate tokens when DetectReplayedTokens is enabled, allowing a captured token to be reused. This issue is fixed in versions 1.8.1 and 1.9.1. |
